Search NASA⌕ Search

SEARCH · Search NASA

Results for “MAGNETIC FIELD INTENSITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,783 records · Page 99

Analyses and Methods of Solid Rocket Motor Material Irradiation at Marshall Space Flight Center

The search for life on other worlds is among humanity’s greatest endeavors. Europa represents the most probable location to discover extraterrestrial life in our solar system, owing to its surface composition of ice covering a liquid water ocean, warmed by the tidal forces of its orbit around Jupiter. Unfortunately, the Jovian system hosts the most intense planetary radiation environment in the solar system due to the charged particles, namely electrons and protons, trapped by Jupiter’s immense magnetic field. Any mission that attempts to approach or land on Europa must survive this radiation environment [Hand et al, 2017]. Radiation effects were identified as a priority risk to the successful development of a de-orbit stage and solid rocket motor (SRM) early in the Europa Lander De-orbit Stage project concept. The effects of primary concern tend to occur very near the outer surface of the SRM. The charged particles deposit their energy quickly and are mostly stopped in the outer metallic case, but a significant portion of radiation penetrates through the bondline and outer propellant regions. High doses of ionizing radiation are known to cause significant changes to mechanical properties of many materials, especially polymers. For polymers such as the rubber-like materials (elastomers) in a solid rocket motor, the primary damage mechanism is known as cross-linking, in which ionization causes the restructuring of the matrix of long polymer chains. Ionization energy breaks the long polymer chains and allows formation of new cross-linked bonding sites. This hardens and often strengthens the polymer, but at the cost of decreased flexibility (or modulus). Propellant, insulation, liner, and pyrotechnic materials were identified as higher risk items, and so were irradiated at Marshall Space Flight Center (MSFC) for investigation of changes in mechanical and ballistic properties. This process required significant levels of analysis to evaluate how the radiation environment evolves within the spacecraft during the mission, and also to evaluate how dose is delivered into test articles within the irradiating facilities.

Caffrey, Jarvis↗

Analyses and Methods of Solid Rocket Motor Material Irradiation at Marshall Space Flight Center

The search for life on other worlds is among humanity’s greatest endeavors. Europa represents the most probable location to discover extraterrestrial life in our solar system, owing to its surface composition of ice covering a liquid water ocean, warmed by the tidal forces of its orbit around Jupiter. Unfortunately, the Jovian system hosts the most intense planetary radiation environment in the solar system due to the charged particles, namely electrons and protons, trapped by Jupiter’s immense magnetic field. Any mission that attempts to approach or land on Europa must survive this radiation environment [Hand et al, 2017]. Radiation effects were identified as a priority risk to the successful development of a de-orbit stage and solid rocket motor (SRM) early in the Europa Lander De-orbit Stage project concept. The effects of primary concern tend to occur very near the outer surface of the SRM. The charged particles deposit their energy quickly and are mostly stopped in the outer metallic case, but a significant portion of radiation penetrates through the bondline and outer propellant regions. High doses of ionizing radiation are known to cause significant changes to mechanical properties of many materials, especially polymers. For polymers such as the rubber-like materials (elastomers) in a solid rocket motor, the primary damage mechanism is known as cross-linking, in which ionization causes the restructuring of the matrix of long polymer chains. Ionization energy breaks the long polymer chains and allows formation of new cross-linked bonding sites. This hardens and often strengthens the polymer, but at the cost of decreased flexibility (or modulus). Propellant, insulation, liner, and pyrotechnic materials were identified as higher risk items, and so were irradiated at Marshall Space Flight Center (MSFC) for investigation of changes in mechanical and ballistic properties. This process required significant levels of analysis to evaluate how the radiation environment evolves within the spacecraft during the mission, and also to evaluate how dose is delivered into test articles within the irradiating facilities.

Caffrey, Jarvis↗

Study of Abnormal Vertical Emittance Growth in ATF Extraction Line

Since several years, the vertical beam emittance measured in the Extraction Line (EXT) of the Accelerator Test Facility (ATF) at KEK, that will transport the electron beam from the ATF Damping Ring (DR) to the future ATF2 Final Focus beam line, is significantly larger than the emittance measured in the DR itself, and there are indications that it grows rapidly with increasing beam intensity. This longstanding problem has motivated studies of possible sources of this anomalous emittance growth. One possible contribution is non-linear magnetic fields in the extraction region experimented by the beam while passing off-axis through magnets of the DR during the extraction process. In this paper, simulations of the emittance growth are presented and compared to observations. These simulations include the effects of predicted non-linear field errors in the shared DR magnets and orbit displacements from the reference orbit in the extraction region. Results of recent measurements using closed orbit bumps to probe the relation between the extraction trajectory and the anomalous emittance growth are also presented.

43 PARTICLE ACCELERATORS↗

Strong Spin–Charge Coupling and Its Manifestation in the Quasiparticle Structure, Cooper Instability, and Electromagnetic Properties of Cuprates

The Fermi excitation spectrum, the problem of Cooper instability, and the Londons magnetic field penetration depth in cuprate superconductors are considered using the unified conception based on accounting for the strong coupling between the spin of copper ions and holes at oxygen ions. This coupling leads to strong renormalization of the primary spectrum of oxygen holes with the formation of spin-polaron quasiparticles. Analysis of Cooper instability performed using the spin-polaron concept for different channels has shown that only the superconducting d-wave pairing occurs in the ensemble of spin-polaron quasiparticles, and there are no solutions corresponding to the s-wave pairing. It has been demonstrated that the superconducting d-wave pairing is not suppressed by the Coulomb repulsion of holes located at neighboring oxygen ions. This effect is due to peculiarities in the crystallographic structure of the CuO{sub 2} plane and the aforementioned strong spin–fermion coupling. As a result, such interaction of holes is omitted in the kernel of the integral equation for the superconducting order parameter with the d-wave symmetry. It has been shown the Hubbard repulsion of holes and their interaction for the second coordination sphere of the oxygen sublattice for actual intensities of the interaction do not suppress the d-wave type of superconductivity. For the spin-polaron ensemble, we have analyzed the dependence of the Londons magnetic field penetration depth on the temperature and hole concentration. It has been established that the peculiarities of this dependence are closely related to specific features of the spin-polaron spectrum.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Galactic cosmic-ray modulation near the heliopause

We investigate the modulation of galactic cosmic rays in the inner and outer heliosheaths using three-dimensional numerical simulations. The model is based on the Parker transport equation integrated using a stochastic phase-space trajectory method. Integration is performed on a plasma background obtained from a global three-dimensional magnetohydrodynamic simulations. Our results predict a negligible amount of modulation in the outer heliosheath because of weak scattering of cosmic ray ions owing to very low levels of magnetic fluctuation power at wavenumbers relevant to the transport of cosmic rays with MeV to GeV energies. This means that the heliopause may be treated as a Dirichlet-type boundary for the purpose of energetic particle modeling. We present models with and without drift velocity to facilitate comparison with papers published earlier. We also attempt to reproduce the sudden step-like increases of cosmic-ray intensity observed by Voyager 1 before its encounter with the heliopause. Our results indicate that very slow cross-field diffusion in the outer heliosheath could produce a large gradient of cosmic rays inside the heliospheric boundary. The resulting large gradient in cosmic-ray intensity near the heliopause qualitatively agrees with recent Voyager 1 observations.

79 ASTRONOMY AND ASTROPHYSICS↗

High-intensity positron microprobe at the Thomas Jefferson National Accelerator Facility

We present a conceptual design for a novel continuous wave electron-linac based high-intensity high-brightness slow-positron production source with a projected intensity on the order of 10{sup 10 }e{sup +}/s. Reaching this intensity in our design relies on the transport of positrons (T{sub +} below 600 keV) from the electron-positron pair production converter target to a low-radiation and low-temperature area for moderation in a high-efficiency cryogenic rare gas moderator, solid Ne. This design progressed through Monte Carlo optimizations of: electron/positron beam energies and converter target thickness, transport of the e{sup +} beam from the converter to the moderator, extraction of the e{sup +} beam from the magnetic channel, a synchronized raster system, and moderator efficiency calculations. For the extraction of e{sup +} from the magnetic channel, a magnetic field terminator plug prototype has been built and experimental results on the effectiveness of the prototype are presented. The dissipation of the heat away from the converter target and radiation protection measures are also discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Spin-dependent and photon-assisted transmission enhancement and suppression in a magnetic-field tunable ZnSe/Zn{sub 1–x}Mn{sub x}Se heterostructure

Using the effective-mass approximation and Floquet theory, we theoretically investigate the terahertz photon-assisted transport through a ZnSe/Zn{sub 1−x}Mn{sub x}Se heterostructure under an external magnetic field, an electric field, and a spatially homogeneous oscillatory field. The results show that both amplitude and frequency of the oscillatory field can accurately manipulate the magnitude of the spin-dependent transmission probability and the positions of the Fano-type resonance due to photon absorption and emission processes. Transmission resonances can be enhanced to optimal resonances or drastically suppressed for spin-down electrons tunneling through the heterostructure and for spin-up ones tunneling through the same structure, resonances can also be enhanced or suppressed, but the intensity is less than the spin-down ones. Furthermore, it is important to note that transmission suppression can be clearly seen from both the spin-down component and the spin-up component of the current density at low magnetic field; at the larger magnetic field, however, the spin-down component is suppressed, and the spin-up component is enhanced. These interesting properties may provide an alternative method to develop multi-parameter modulation electron-polarized devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Rapid non-contact energy transfer for additive manufacturing driven high intensity electromagnetic fields

A method and apparatus for additive manufacturing that includes a nozzle and/or barrel for extruding a plastic material and a supply of polymeric working material provided to the nozzle, wherein the polymeric working material is magnetically susceptible and/or electrically conductive. A magneto-dynamic heater is provided for producing a time varying, high flux, frequency sweeping, alternating magnetic field in the vicinity of the nozzle to penetrate into and couple the working material to heat the material through at least one of an induced transient magnetic domain and an induced, annular current.

42 ENGINEERING↗

The Substorm Cycle as Reproduced by Global MHD Models

Recently, Gordeev et al. (2015) suggested a method to test global MHD models against statistical empirical data. They showed that four community-available global MHD models supported by the Community Coordinated Modeling Center (CCMC) produce a reasonable agreement with reality for those key parameters (the magnetospheric size, magnetic field, and pressure) that are directly related to the large-scale equilibria in the outer magnetosphere. Based on the same set of simulation runs, here we investigate how the models reproduce the global loading-unloading cycle. We found that in terms of global magnetic flux transport, three examined CCMC models display systematically different response to idealized2 h north then 2 h south interplanetary magnetic field (IMF) Bz variation. The LFM model shows a depressed return convection and high loading rate during the growth phase as well as enhanced return convection and high unloading rate during the expansion phase, with the amount of loaded unloaded magnetotail flux and the growth phase duration being the closest to their observed empirical values during isolated substorms. Two other models exhibit drastically different behavior. In the BATS-R-US model the plasma sheet convection shows a smooth transition to the steady convection regime after the IMF southward turning. In the Open GGCM a weak plasma sheet convection has comparable intensities during both the growth phase and the following slow unloading phase. We also demonstrate potential technical problem in the publicly available simulations which is related to post processing interpolation and could affect the accuracy of magnetic field tracing and of other related procedures.

Gordeev, E.↗

Magnetoabsorption of the electromagnetic radiation by a two-dimensional electron gas with Rashba's spin-orbit coupling in a heterojunction with a lateral superlattice

Absorption of linearly polarized electromagnetic radiation by a two-dimensional electron gas in a lateral-superlattice structure subjected to a perpendicular magnetic field is calculated analytically and numerically for the first time, taking into account Rashba's spin-orbit coupling and Zeeman splitting. Calculations are carried out for semiconductor heterostructures characterized by weak and sufficiently strong spin-orbit coupling (AlGaAs/GaAs and GaAs/InGaAs, respectively). The nature of the new effect related to intense magnetoabsorption of electromagnetic radiation in the submillimeter range by a two-dimensional electron gas in a superlattice with strong spin-orbit coupling is analyzed. Magneto-optical experiments aimed at studying spin-Peierls states of charge carriers are discussed and, in this context, optimum parameters for semiconductor structures with spin-orbit coupling and values of the magnetic field are determined.

36 MATERIALS SCIENCE↗

Toward Interpreting the IBEX Ribbon with Mirror Diffusion in Interstellar Turbulent Magnetic Fields

We investigate the role of the magnetohydrodynamic (MHD) turbulence measured by Voyager in the very local interstellar medium (VLISM) in modeling the Interstellar Boundary Explorer ribbon. We demonstrate that the mirroring by compressible modes of MHD turbulence dominates over that by the mean magnetic field. Based on the new mirror diffusion mechanism identified by Lazarian & Xu for particles with large pitch angles in MHD turbulence, we find that the mirror diffusion can both confine pickup ions and preserve their initial pitch angles, and thus it accounts for the enhanced intensity of energetic neutral atoms that return to the heliosphere. The ribbon width is determined by both the range of pitch angles for effective turbulent mirroring and the field line wandering induced by Alfvénic modes. It in turn provides a constraint on the amplitude of magnetic fluctuations of fast modes. The field line wandering also affects the coherence of the ribbon structure across the sky. By extrapolating the magnetic energy spectrum measured by Voyager, we find that the injection scale of the turbulence in the VLISM must be less than ~500 au for the ribbon structure to be coherent.

79 ASTRONOMY AND ASTROPHYSICS↗

GMC COLLISIONS AS TRIGGERS OF STAR FORMATION. I. PARAMETER SPACE EXPLORATION WITH 2D SIMULATIONS

We utilize magnetohydrodynamic (MHD) simulations to develop a numerical model for giant molecular cloud (GMC)–GMC collisions between nearly magnetically critical clouds. The goal is to determine if, and under what circumstances, cloud collisions can cause pre-existing magnetically subcritical clumps to become supercritical and undergo gravitational collapse. We first develop and implement new photodissociation region based heating and cooling functions that span the atomic to molecular transition, creating a multiphase ISM and allowing modeling of non-equilibrium temperature structures. Then in 2D and with ideal MHD, we explore a wide parameter space of magnetic field strength, magnetic field geometry, collision velocity, and impact parameter and compare isolated versus colliding clouds. We find factors of ∼2–3 increase in mean clump density from typical collisions, with strong dependence on collision velocity and magnetic field strength, but ultimately limited by flux-freezing in 2D geometries. For geometries enabling flow along magnetic field lines, greater degrees of collapse are seen. We discuss observational diagnostics of cloud collisions, focussing on {sup 13}CO(J = 2–1), {sup 13}CO(J = 3–2), and {sup 12}CO(J = 8–7) integrated intensity maps and spectra, which we synthesize from our simulation outputs. We find that the ratio of J = 8–7 to lower-J emission is a powerful diagnostic probe of GMC collisions.

79 ASTRONOMY AND ASTROPHYSICS↗

Magnetic Roots and the Driving of Extended Coronal Heating

We report results from a continuation of a previous study, in which we found large bright coronal loops within active regions and extending from active regions that have one end rooted near an island of included magnetic polarity that is a site of enhanced coronal heating and microflares. This suggested that magnetic activity such as microflaring results in enhanced heating in both the compact core field around the island and in the large loops extending from it. We might expect that the intensity variations due to enhanced heating in the compact and extended structures would be correlated. However, although some ex- tended loops do respond to the largest events taking place in the core fields near their feet, they do not show a clear response to most smaller individual events nor to the overall envelope of coronal heating activity in the core fields at their feet as determined from longer-term observations. Thus, while it is clear that the extended loops' heating is being driven from their ends at the magnetic islands, much of this heating is apparently by some form of footpoint activity that is not strongly coupled to the heating in the footpoint core fields. One possibility is that the remote heating in the extended loops is driven by reconnection at the magnetic null over the island, and that this reconnection is driven mainly by core-field activity that produces little coronal heating within the core field itself, perhaps in the manner of the numerical simulations by Karpen, Antiochos, and DeVore.

Porter, Jason G.↗

Foil focusing of relativistic electron beams

When an intense relativistic electron beams (IREB) passes through a grounded metal foil, the transverse electric field due to the beam space charge is locally shorted out, and the beam is focused by the magnetic field of its current. The effect can be treated as focusing by a thin lens with first order aberration. Expressions for the focal length and aberration coefficient of the equivalent thin lens are developed in this note. These are then applied to practical examples representative of IREB research at Los Alamos National Laboratory.

43 PARTICLE ACCELERATORS↗

VLF-HISS from electrons in the earth's magnetosphere

Intensities of auroral and magnetospheric hiss generated by the Cherenkov radiation process of electrons in the lower magnetosphere were calculated with respect to a realistic model of the earth's magnetosphere. In this calculation, the magnetic field was expressed by the Mead-Fairfield Model, and a static model of the iono-magnetospheric plasma distribution was constructed by accumulated data obtained by recent satellite observations. The energy range of hiss producing electrons and the frequency range of produced VLF in the computation are 100 eV to 200 keV, and 2 to 200 kHz, respectively. The maximum hiss intensity produced by soft electrons is more than one order higher than that of hard electron produced hiss. Higher rate of hiss occurrence in the daytime side, particularly in the soft electron precipitation zone in the morning sector, and less association of auroral hiss in nighttime sectors must be, therefore, due to the local time dependence of the energy spectra of precipitating electrons rather than the difference in the geomagnetic field and in the geoplasma distributions.

Maeda, K.↗

Coronal Magnetic Structures Observing Campaign. II - Magnetic and plasma properties of a solar active region

Simultaneous soft X-ray, microwave, and photospheric magnetic field observations were taken during the Coronal Magnetic Structures Observing Campaign. The plasma electron temperatures and emission measures determined from the X-ray data are used to predict the intensity and structure of the thermal bremsstrahlung emission at 20 and 6 cm. Comparing these predictions with the microwave observations, it is found that the 20 cm structure is very similar to that expected from the X-rays, but a substantial amount of the 6 cm emission was resolved out. The predicted 20 cm brightness temperatures are higher than the observed, requiring cool absorbing material (not greater than 500,000 K) between the hot X-ray plasma and the observer. The absorption mechanism in the cool plasma at 20 cm is most likely thermal bremsstrahlung, requiring coronal magnetic fields as high as 150 G. 'Coronal Magnetograms', made by extrapolating the photospheric longitudinal field using the Sakurai code, show that appropriate values of the total field are reached at heights of 6000-10,000 km above the photosphere (at many but not all locations).

Schmelz, J. T.↗

Effect of Thermoelectric Magnetic Convection on Shrinkage Porosity at the Final Stage of Solidification of GCr18Mo Steel Under Axial Static Magnetic Field

Adopting effective strategies to eliminate the shrinkage porosity at the final stage of steel solidification is one of the most attractive research subjects for metallurgists. Despite the progress in understanding the thermoelectric magnetic convection (TEMC) in the solidification process, utilization of TEMC for modifying the solidification feeding of steel has been ignored. The effects of TEMC on the shrinkage porosity at the final stage of solidification of GCr18Mo steel were investigated under an axial static magnetic field (ASMF). The morphology and porosity of GCr18Mo steel were investigated quantitatively by X-ray microtomography. We found that the amount of porosity first decreases and then increases with increasing intensity of the ASMF. Meanwhile, the shape of the porosity changed from tortuous to elliptic under the ASMF. On the basis of both the experimental and simulated results, the decrease in porosity is attributed to an adequate development of the TEMC leading to sufficient feeding. This study sheds light on an alternative technique for eliminating the shrinkage porosity at the final stage of steel solidification in industrial applications.

36 MATERIALS SCIENCE↗

DENSITY PERTURBATION BY ALFVÉN WAVES IN MAGNETO-PLASMA

In this article, we attempt to investigate the density perturbations along magnetic field by ponderomotive effects due to inertial Alfvén waves (AWs) in auroral ionosphere. For this study, we take high-frequency inertial AWs (pump) and their nonlinear interactions with low-frequency slow modes of AWs in that region. The dynamical equations representing these wave modes are known as the Zakharov like equation, and are solved numerically. From the results presented here, we notice the density perturbations in the direction of background magnetic fields. We also find that the deepest density cavity is associated with the strongest magnetic fields. The main reason for these nonlinear structures could be the ponderomotive effects due to the pump waves. The amplitude of these density structures varies with time until the modulation instability saturates. From our results, we estimate the amplitude of most intense cavity as ∼15% of the unperturbed plasma number density n {sub 0}, which is consistent with the observations. These density structures could be the locations for particle energizations in this region.

79 ASTRONOMY AND ASTROPHYSICS↗