SEARCH · Search NASA

Results for “MAGNETS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,783 records · Page 99

All sources NASA NTRS DOE OSTI

DOE OSTI2023

Tuning the magnetic properties of the CrMnFeCoNi Cantor alloy

Magnetic properties of more than 20 Cantor alloy samples of varying composition were investigated over a temperature range of 5 K to 300 K and in fields of up to 70 kOe using magnetometry and muon spin relaxation. Two transitions are identified: a spin-glass-like transition that appears between 55K and 190K, depending on composition, and a ferrimagnetic transition that occurs at approximately 43K in multiple samples with widely varying compositions. The magnetic signatures at 43K are remarkably insensitive to chemical composition. A modified Curie-Weiss model was used to fit the susceptibility data and to extract the net effective magnetic moment for each sample. The resulting values for the net effective moment were either diminished with increasing Cr or Mn concentrations or enhanced with decreasing Fe, Co, or Ni concentrations. Beyond a sufficiently large effective moment, the magnetic ground state transitions from ferrimagnetism to ferromagnetism. The effective magnetic moments, together with the corresponding compositions, are used in a global linear regression analysis to extract element-specific effective magnetic moments, which are compared to the values obtained by ab initio based density functional theory calculations. Finally, these moments provide the information necessary to controllably tune the magnetic properties of Cantor alloy variants.

36 MATERIALS SCIENCE↗

DOE OSTI2023

Direct Observation of Magnetic Bubble Lattices and Magnetoelastic Effects in van der Waals Cr 2 Ge 2 Te 6

Abstract Ferromagnetic van der Waals (vdW) materials are of large current interest for the fundamental study of low‐dimensional magnetism and for potential applications in multilayer heterostructures. Cr 2 Ge 2 Te 6 (CGT) is particularly exciting because it is a ferromagnetic semiconductor with tunable electronic and magnetic properties. Controlling the magnetic domain structure of CGT is a requirement for understanding its novel interface physics and for tuning behavior for potential devices. Herein, cryo‐Lorentz transmission electron microscopy is performed in the temperature range of 12–50K to directly image the magnetic domain structures in CGT. A rich phase diagram of domain structures including stripe domains, magnetic bubble lattices of mixed‐chirality, and topologically‐protected lattices of homochiral magnetic bubbles is observed. The types and chiralities of the bubbles can be controlled by topographical changes in the CGT flakes. Additionally, it is observed that in‐plane strain and magnetoelastic coupling can align and organize both bubble lattices and stripe domains. This study provides insights into creating and controlling complex magnetic domain structures for integration into multilayer heterostructures and for future studies of 2D magnetism.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Direct Visualization of Magnetic Correlations in Frustrated Spinel ZnFe 2 O 4

Magnetic materials with the spinel structure (A 2+ B 3+ 2 O 4 ) form the core of numerous magnetic devices, and ZnFe 2 O 4 constitutes a peculiar example where the nature of the magnetism is still unresolved. Susceptibility measurements revealed a cusp around T c = 13 K resembling an antiferromagnetic transition, despite the positive Curie–Weiss temperature determined to be Θ CW = 102.8(1) K. Bifurcation of field-cooled and zero-field-cooled data below T c in conjunction with a frequency dependence of the peak position and a non-zero imaginary component below T c shows it is in fact associated with a spin-glass transition. Highly structured magnetic diffuse neutron scattering from single crystals develops between 50 K and 25 K revealing the presence of magnetic disorder which is correlated in nature. Here, the 3D-mΔPDF method is used to visualize the local magnetic ordering preferences, and ferromagnetic nearest-neighbor and antiferromagnetic third nearest-neighbor correlations are shown to be dominant. Their temperature dependence is extraordinary with some flipping in sign and a strongly varying correlation length. The correlations can be explained by orbital interaction mechanisms for the magnetic pathways and a preferred spin cluster. This study demonstrates the power of the 3D-mΔPDF method in visualizing complex quantum phenomena thereby providing a way to obtain an atomic-scale understanding of magnetic frustration.

36 MATERIALS SCIENCE↗

DOE OSTI2018

Effect of High-Gradient Magnetic Field on Electrical Property of Carbon Nanotube-Polypyrrole Composite; Nanotube Separation Mechanism

High- and low-gradient magnetic fields are produced by resistor-inductor-capacitor (RLC) discharge apparatuses. The maximum magnetic field is 12.5 Tesla with 1-ms pulse duration. Multiwall carbon nanotube–polypyrrole composite is prepared. The samples are exposed to high- and low-gradient magnetic fields. To understand the behavior of carbon nanotubes (CNTs) in high-gradient magnetic fields (HGMFs), we theoretically calculated the equivalent magnetic susceptibility of a CNT in the gradient magnetic field. We found that the gradient force which is exerted on a CNT could be repellent or absorbent depending on the parallel and perpendicular susceptibilities of the CNT, as well as on the initial orientation of the CNT with respect to magnetic field direction. Four-probe studies show that the electrical conductivity of CNT composites decreases after exposure to a high-gradient magnetic field. Microscopic observation of the electrical current profile of composites reveals rearrangement of CNTs under HGMF.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2019

Magnetic and Magnetoresistive Behavior of the Ferromagnetic Heavy Fermion YbNi{sub 2}

We present a study on the magnetic susceptibility χ(T) and electrical resistance, as a function of temperature and magnetic field R(T, H), of the ferromagnetic heavy fermion YbNi{sub 2}. The X-ray diffraction analysis shows that the synthesized polycrystalline samples crystallizes in the cubic Laves phase structure C15, with a spatial group Fd 3-bar m. The magnetic measurements indicate a ferromagnetic behavior with transition temperature at 9 K. The electrical resistance is metallic-like at high temperatures and no signature of Kondo effect was observed. In the ferromagnetic state, the electrical resistance can be justified by electron-magnon scattering considering the existence of an energy gap in the magnonic spectrum. The energy gap was determined for various applied magnetic fields. Magnetoresistance as a function of applied magnetic field, subtracted from the R(T, H) curves at several temperatures, is negative from 2 K until about 40 K for all applied magnetic fields. The negative magnetoresistance originates from the suppression of magnetic disorder by the magnetic field.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2018

Effects of the magnetic field and zinc isotopes on the colony forming ability and elemental composition of E. coli bacterial cells

The combined effects of external weak magnetic fields and nuclear spins of the magnetic isotope {sup 67}Zn on vital functions of E. coli bacterial cells were proved experimentally. Metabolism of the major elements in E. coli depends on the intensity of the external static magnetic field and zinc isotopes contained in the nutrient medium. The combined effects of the external static magnetic field and zinc magnetic isotope {sup 67}Zn are observed in a change in the number of colony-forming units of E. coli bacteria in a range of 25–35 mT and in the content of Na, Ca and Mg in a range of 65–80 mT. The obtained data confirm magnetic sensitivity of intracellular enzymatic processes to the static magnetic field and magnetic moments of atomic nuclei.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

Multifunctional Prussian blue analogue magnets: Emerging opportunities

There is a surge of interest to expand the search for entirely new classes of molecular magnets as the emergence of information storage and quantum computing devices. Prussian blue analogues as a family of molecular magnets are especially attracting wide attention due to their large number of derivatives with a range of magnetic ordering temperature from cryogenic to high temperature. Furthermore, this review presents Prussian blue analogues as multifunctional molecular magnets, which involves the development of molecular magnet syntheses and crystal structures, and magnetic properties under external stimuli. In addition, the porous network structures and vacancy order of Prussian blue analogues present a wide capability to interact with water molecules and gas adsorption. External stimuli, such as thermal, pressure, electric and magnetic field and photoexcitation, play an important role in controlling the hidden states and cooperative phenomena of high temperature molecular magnets based on Prussian blue analogues.

36 MATERIALS SCIENCE↗

DOE OSTI2023

Effect of particle size on the capture of uranium oxide colloidal particles from aqueous suspensions via high-gradient magnetic filtration

The effectiveness of High Gradient Magnetic Filtration (HGMF) in capturing uranium oxide particles from suspensions was investigated in this study. Two sets of experiments were performed to evaluate the importance of size on the capture of uranium oxide particles. The first considered two batches sieved into size bins of< 5, 5–10, 10–15, and 15–20 µm, while the second was performed using two suspensions with diameters smaller than 1.0 µm and between 1.0 and 1.5 µm. Iron oxide experiments, with particles between 0.3 and 0.8 µm, were performed for calibration purposes. In all experiments, a surfactant (Triton-X100 or sodium dodecyl sulfate) was used to prevent particle aggregation and limit the influence of non-magnetic capture mechanisms. A magnetic field of approximately 1.1 Tesla was generated using a water cooled electromagnet. HGMF was performed using tubular filters packed with ferromagnetic stainless-steel wool. Of the initial four uranium oxide particle sizes, magnetic capture was only observed for particles with a diameter of less than 5 µm, while larger particles experienced no magnetic and minimal total capture. For particles with diameters smaller than 1.0 µm and between 1.0 and 1.5 µm, capture efficiencies increased by 39 ± 9% and 34 ± 6% respectively, solely due to the magnetic field. Although the magnetic force is proportional to particle diameter, the capture efficiency decreased as diameter increased. So these results suggest that Brownian diffusion, which is influential for micron sized particles and increases with decreasing particle size, is acting in conjunction with the magnetic force to influence the efficacy of HGMF for uranium oxide. This important finding underscores the effectiveness of Brownian diffusion in increasing the rate of collision between particles and collector fibers. A stochastic trajectory model was developed to incorporate the influence of Brownian motion on particle behavior and filter removal efficiency. Modeling results are discussed and compared for uranium and iron oxide particles.

42 ENGINEERING↗

DOE OSTI2023

High-gradient magnetic separation of colloidal uranium oxide particles from soil components in aqueous suspensions

The separation of uranium oxide (UO 2 ) particles from soil-surrogate particles in aqueous suspensions was achieved using filtration enhanced by a magnetic field. Enhanced attraction of paramagnetic UO 2 colloids to a ferromagnetic stainless-steel filter placed in a strong magnetic field arises because of the positive magnetic susceptibility of the particles and the high-gradient field generated near ferromagnetic fibers. Enhanced uptake of smaller particles over larger ones occurs through Brownian motion that promotes the collision of particles with the ferromagnetic fibers of the filter. Hence, this work focused on UO 2 particles in the colloidal size range. Experiments used a water-cooled electromagnet and an array of permanent magnets. Chemical analysis showed that the magnetic field increased the capture efficiency of uranium particles from a range of 27–53% with the magnet off up to 98% with the magnet on after a single pass of the suspension through the filter. Further, the recovery of the UO 2 particles from the filter, however, was more difficult to achieve. Small amounts of UO 2 , together with significant amounts of background SiO 2 particles, were removed from the filter during a first flush with the magnetic field on. A much larger recovery of UO 2 was not observed until a second out-of-field flush was performed, which also released some SiO 2 . The degree to which particle separation was enhanced through the use of multi-stage filtration compared to single pass-through filtration was also examined. A design was suggested that could be used to optimize the separation efficiency for a continuous process.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

DOE OSTI2018

Synthesis and magnetic properties of nanocrystalline Gd3Fe5O12 and GdFeO3 powders prepared by sol–gel auto-combustion method

Highlights: • Glycine-based gel was successfully applied in the preparation of Gd ferrites. • High-purity nanocrystalline Gd{sub 3}Fe{sub 5}O{sub 12} and GdFeO{sub 3} powders were synthesized. • Magnetic properties of nanocrystalline GdFeO{sub 3} and Gd{sub 3}Fe{sub 5}O{sub 12} were investigated. • Transition mechanism of magnetic phase was discussed in detail. - Abstract: Nanocrystalline GdFeO{sub 3} and Gd{sub 3}Fe{sub 5}O{sub 12} powders were prepared successfully by sol–gel auto-combustion method using a glycine-based gel. The as-prepared GdFeO{sub 3} and Gd{sub 3}Fe{sub 5}O{sub 12} powders presented spherical shape, and composed of continuous porous network structure due to the releasing of a large amount of gases during auto-combustion process. This special microstructure was significant for reducing the magnetic interactions between nanocrystalline powders. The Gd{sub 3}Fe{sub 5}O{sub 12} samples presented ferrimagnetic feature at low temperatures. At 10 K, the saturate magnetization is about 87.9 emu/g. As temperature increased to 300 K, the magnetization decreased rapidly since the thermal fluctuations changed the main magnetic spin ordering. The GdFeO{sub 3} samples presented antiferromagnetic feature at 5 K, and the magnetization reaches 109 emu/g at 50,000 Oe field. As temperature increased to 300 K, the antiferromagnetism decreased rapidly, and the magnetization curve presents linear tendency due to the dominant paramagnetism contribution of Gd{sup 3+} ions.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

DOE OSTI2022

Real-space visualization of short-range antiferromagnetic correlations in a magnetically enhanced thermoelectric

Short-range magnetic correlations can significantly increase the thermopower of magnetic semiconductors, representing a noteworthy development in the decades-long effort to develop high-performance thermoelectric materials. Here, we reveal the nature of the thermopower-enhancing magnetic correlations in the antiferromagnetic semiconductor MnTe. Using magnetic pair distribution function analysis of neutron scattering data, we obtain a detailed, real-space view of robust, nanometer-scale, antiferromagnetic correlations that persist into the paramagnetic phase above the Neel temperature $T_N$ = 307 K. In this work, the magnetic correlation length in the paramagnetic state is significantly longer along the crystallographic c axis than within the ab plane, pointing to anisotropic magnetic interactions. Ab initio calculations of the spin-spin correlations using density functional theory in the disordered local moment approach reproduce this result with quantitative accuracy. These findings constitute the first real-space picture of short-range spin correlations in a magnetically enhanced thermoelectric and inform future efforts to optimize thermoelectric performance by magnetic means.

36 MATERIALS SCIENCE↗

DOE OSTI2020

Additive manufacturing of highly dense anisotropic Nd–Fe–B bonded magnets

Extrusion based big area additive manufacturing process is utilized for fabrication of dense anisotropic bonded magnets. High loading fraction (≥70 vol%) of magnequench anisotropic Nd–Fe–B powder in nylon is used for preparing anisotropic bonded magnets. A higher energy product of ~143.2 kJ/m 3 is obtained for the post printed magnetic field aligned at 1 Tesla. These findings make an important step towards the fabrication of gap magnets with energy product between ferrite and Nd–Fe–B sintered magnets. Finally, printed bonded magnets exhibited better thermal stability, mechanical properties and superior magnetic properties compared to commercial injection molded magnets.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Development of neutron spin-phase imaging for amorphous magnetic thin film investigation

Neutron spin-phase imaging (NSPI) capability was developed to study the magnetization distribution of an amorphous magnetic thin film. The local magnetization under different applied magnetic fields between 0.09 and 1.36 mT was investigated. The developed radio frequency flippers showed more than 95% flipping efficiency under these fields. A spatial resolution of ~0.4 mm and field of view of ~24 mm x 27 mm were achieved. In conclusion, the bulk property of the random distributions of the magnetization and magnetic field distribution ranging between ~1.1 and 1.4 T were observed showing that NSPI is a useful technique for investigating the spatial dependence of magnetic properties of amorphous magnetic thin films.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2023

Interplay between Local Moment and Itinerant Magnetism in the Layered Metallic Antiferromagnet TaFe 1.14 Te 3

Two-dimensional antiferromagnets have garnered considerable interest for the next generation of functional spintronics. However, many bulk materials from which two-dimensional antiferromagnets are isolated are limited by their air sensitivity, low ordering temperatures, and insulating transport properties. TaFe 1+y Te 3 aims to address these challenges with increased air stability, metallic transport, and robust antiferromagnetism. Here, we synthesize TaFe 1+y Te 3 (y = 0.14), identify its structural, magnetic, and electronic properties, and elucidate the relationships between them. Axial-dependent high-field magnetization measurements on TaFe 1.14 Te 3 reveal saturation magnetic fields ranging between 27-30 T with saturation magnetic moments of 2.05- 2.12 μ B . Magnetotransport measurements confirm TaFe 1.14 Te 3 is metallic with strong coupling between magnetic order and electronic transport. Angle-resolved photoemission spectroscopy measurements across the magnetic transition uncover a complex interplay between itinerant electrons and local magnetic moments that drives the magnetic transition. In conclusion, we demonstrate the ability to isolate few-layer sheets of TaFe 1.14 Te 3 , establishing TaFe 1.14 Te 3 as a potential platform for two-dimensional spintronics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2025

Magnetic Proximity Effects in Iron Germanium Telluride/Platinum Heterostructures

Van der Waals (vdW) magnetic materials have attracted considerable attention for use in spintronic devices such as those controlled by spin–orbit torque (SOT). Such SOT-driven devices are typically fabricated by bringing a vdW magnet in proximity to a spin–charge conversion layer to achieve current-driven magnetization switching. Here, we show that such structures fabricated with iron germanium telluride (FGT) and platinum can exhibit emergent magnetic properties, which we attribute to magnetic proximity effects at the FGT/Pt interface. These changes manifest as increased perpendicular magnetic anisotropy and the emergence of additional magnetization reversal steps as probed by magneto-transport, with the most significant changes appearing in thinner flakes. The behavior was found to be robust and consistently appeared in samples made with crystals from different vendors. In conclusion, our results demonstrate the potential for engineering vdW spintronic systems through magnetic proximity effects.

2D magnet↗

DOE OSTI2026

Self-Assembly Interactions in Magnetite-Coated Cellulose Nanocrystals: Implications for Magnetic Hyperthermia Applications

Magnetic cellulose nanocrystal (MCNC) nanocomposites are promising sustainable and biocompatible platforms for magnetic hyperthermia; however, the molecular mechanisms governing Fe 3 O 4 adsorption and deposition onto CNCs remain poorly understood. Here, sulfated (S-CNC) and TEMPO-oxidized CNCs (T-CNC) were used to prepare nanocomposites at 1:2 and 1:4 CNC:Fe 3 O 4 mass ratios, enabling a systematic evaluation of how surface chemistry and nanoparticle loading dictate interfacial interactions and magneto-colloidal behavior. Bare magnetite nanoparticles were 21 ± 5 nm by TEM but grew to 144 ± 18 in the DLS measurement at pH 7. The S-CNC nanocomposites had hydrodynamic sizes between 144 and 210 nm, not much larger than the 140 nm long CNC rods, suggesting an enhanced dispersion stability compared to Fe3O4 alone. X-ray photoelectron spectroscopy combined with density functional theory revealed that −OH and −COOH groups drive electrostatic adsorption with charge transfer from Fe 3 O 4 to the CNC surface, while T-CNCs showed more favorable adsorption energies and evidence of covalent Fe−O bonding. Vibrating sample magnetometry demonstrated superparamagnetic behavior for all samples, with S-CNC/Fe 3 O 4 1:4 and 1:2 displaying saturation magnetizations of 78 and 77 emu/g-Fe 3 O 4 , close to the 83 emu/g of bare magnetite. The T-CNC composites showed lower (60 and 66 emu/g-Fe3O4) saturation magnetizations. Zero-field-cooled/field-cooled measurements resulted in a blocking temperature of 112 K for all samples, except T-CNC/Fe 3 O 4 1:2 (100 K). Magnetic hyperthermia studies revealed that specific absorption rate (SAR) increased with field strength and Fe 3 O 4 content; however, S-CNC/Fe 3 O 4 (1:2) achieved the highest intrinsic SAR per gram of Fe 3 O 4 (649 W/g-Fe 3 O 4 ) likely due to its anisotropy and fast magnetic relaxation. Cytotoxicity assays confirmed that all nanocomposites were nontoxic toward mammalian cells. These results establish quantitative structure−property relationships between CNC surface chemistry, interfacial bonding mechanisms, and magnetic heating performance, providing a foundation for rational design of biocompatible magnetic nanocomposites for hyperthermia and related applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2025

MnBi 2 Is a Permanent Magnet

Creating and understanding new permanent magnets requires an understanding of the impact of orbital angular momentum on coercivity. A simple approach to interrogating this relationship is by incorporating high Z (where Z is the atomic number) elements into binary compounds to maximize spin–orbit coupling. The Mn–Bi system is an appealing platform for these studies since it contains MnBi, a permanent magnet with a large coercive field. We previously identified a new compound in the Mn–Bi system, MnBi 2 , but could not elucidate its magnetic properties ex situ due to its decomposition upon decompression. Here, we harnessed synchrotron X-ray magnetic circular dichroism to probe the magnetism of MnBi 2 at high pressure within a diamond anvil cell. Our results indicate that MnBi 2 exhibits ferromagnetic hysteresis at both 10 K and room temperature. Through calculations and experiments, we show that orbital angular momentum and spin–orbit coupling from Bi impart magnetic anisotropy in MnBi 2 . Comparing the Mn–Bi family of compounds, we consider the Bi p and d orbitals to explain the differences in magnetic behavior within the system. Collectively, these results validate leveraging high-Z elements in the synthesis of new hard permanent magnets.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2022

Squeezing the periodicity of Néel-type magnetic modulations by enhanced Dzyaloshinskii-Moriya interaction of 4d electrons

In polar magnets, such as GaV 4 S 8 , GaV 4 Se 8 and VOSe 2 O 5 , modulated magnetic phases namely the cycloidal and the Néel-type skyrmion lattice states were identified over extended temperature ranges, even down to zero Kelvin. Our combined small-angle neutron scattering and magnetization study shows the robustness of the Néel-type magnetic modulations also against magnetic fields up to 2 T in the polar GaMo 4 S 8 . In addition to the large upper critical field, enhanced spin-orbit coupling stabilize cycloidal, Néel skyrmion lattice phases with sub-10 nm periodicity and a peculiar distribution of the magnetic modulation vectors. Moreover, we detected an additional single-q state not observed in any other polar magnets. Thus, our work demonstrates that non-centrosymmetric magnets with 4d and 5d electron systems may give rise to various highly compressed modulated states.

36 MATERIALS SCIENCE↗