Search NASA⌕ Search

SEARCH · Search NASA

Results for “MASK”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,783 records · Page 99

Programmably structured plasma waveguide for development of table-top photon and particle sources

Programmable fabrication of longitudinal spatial structures in an optically preformed plasma waveguide in a gas jet was achieved, by using laser machining with a liquid-crystal spatial light modulator as the pattern mask. Fabrication of periodic structures with a minimal period of 200 {mu}m and density-ramp structures with a minimal slope length of 100 {mu}m was attained. The technique is useful for the optimization of various laser-plasma-based photon and particle sources.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Physical conditions for fast reconnection evolution in space plasmas

The present paper studies physical conditions for fast reconnection mechanism involving slow shocks to evolve spontaneously in space (high-temperature) plasmas. This is fundamental for onset mechanisms of geomagnetic substorms and solar flares. It is demonstrated that reconnection evolution strongly depends on effective resistivity available in space plasmas as well as on dimensions of initial current sheet. If a current sheet is sufficiently thin, fast reconnection spontaneously evolves only when resistivity is locally enhanced around X reconnection point. This is because in space plasmas reconnection flows cause vital current concentration locally around X point. For current-driven anomalous resistivity, the resulting resistivity is automatically localized around X point, so fast reconnection mechanism can be realized. On the other hand, for uniform or Spitzer resistivity, any fast reconnection cannot grow; in particular, Spitzer resistivity is reduced around X point because of Joule heating. Regarding reconnection simulations (either fluid or particle), unless numerical resistivities are made negligibly small, they seriously mask the effects of physical resistivity, leading to a misleading conclusion that reconnection evolution is little influenced by plasma resistivity.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Tailoring plasmon resonances in the deep-ultraviolet by size-tunable fabrication of aluminum nanostructures

Localized surface plasmon resonances were controlled at deep-ultraviolet (DUV) wavelengths by fabricating aluminum (Al) nanostructures in a size-controllable manner. Plasmon resonances were obtained at wavelengths from near-UV down to 270 nm (4.6 eV) depending on the fabricated structure size. Such precise size control was realized by the nanosphere lithography technique combined with additional microwave heating to shrink the spaces in a close-packed monolayer of colloidal nanosphere masks. By adjusting the microwave heating time, the sizes of the Al nanostructures could be controlled from 80 nm to 50 nm without the need to use nanosphere beads of different sizes. With the outstanding controllability and versatility of the presented fabrication technique, the fabricated Al nanostructure is promising for use as a DUV plasmonic substrate, a light-harvesting platform for mediating strong light-matter interactions between UV photons and molecules placed near the metal nanostructure.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Coded aperture imaging of fusion source in a plasma focus operated with pure D{sub 2} and a D{sub 2}-Kr gas admixture

The coded aperture imaging (CAI) technique has been used to investigate the spatial distribution of DD fusion in a 1.6 kJ plasma focus (PF) device operated in, alternatively, pure deuterium or deuterium-krypton admixture. The coded mask pattern is based on a singer cyclic difference set with 25% open fraction and positioned close to 90 Degree-Sign to the plasma focus axis, with CR-39 detectors used to register tracks of protons from the D(d, p)T reaction. Comparing the coded aperture imaging proton images for pure D{sub 2} and D{sub 2}-Kr admixture operation reveals clear differences in size, density, and shape between the fusion sources for these two cases.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Spatially resolving variations in giant magnetoresistance, undetectable with four-point probe measurements, using infrared microspectroscopy

Magnetorefractive infrared (IR) microspectroscopy is demonstrated to resolve spatial variations in giant magnetoresistance (GMR) and, by modelling, provide an insight into the origin of the variations. Spatial variations are shown to be masked in conventional four-point probe electrical or IR spectral measurements. IR microspectroscopy was performed at the SMIS beamline at the SOLEIL synchrotron, modified to enable measurements in magnetic fields. A GMR gradient was induced in a CoFe/Cu multilayer sample by annealing in a temperature gradient. Modelling revealed that variations in GMR at 900 Oe could be attributed to local variations in interlayer coupling locally changing the switching field.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Plasma processing of low-k dielectrics

This paper presents an in-depth overview of the present status and novel developments in the field of plasma processing of low dielectric constant (low-k) materials developed for advanced interconnects in ULSI technology. The paper summarizes the major achievements accomplished during the last 10 years. It includes analysis of advanced experimental techniques that have been used, which are most appropriate for low-k patterning and resist strip, selection of chemistries, patterning strategies, masking materials, analytical techniques, and challenges appearing during the integration. Detailed discussions are devoted to the etch mechanisms of low-k materials and their degradation during the plasma processing. The problem of k-value degradation (plasma damage) is a key issue for the integration, and it is becoming more difficult and challenging as the dielectric constant of low-k materials scales down. Results obtained with new experimental methods, like the small gap technique and multi-beams systems with separated sources of ions, vacuum ultraviolet light, and radicals, are discussed in detail. The methods allowing reduction of plasma damage and restoration of dielectric properties of damaged low-k materials are also discussed.

36 MATERIALS SCIENCE↗

Angle performance on optima MDxt

Angle control on medium current implanters is important due to the high angle-sensitivity of typical medium current implants, such as halo implants. On the Optima MDxt, beam-to-wafer angles are controlled in both the horizontal and vertical directions. In the horizontal direction, the beam angle is measured through six narrow slits, and any angle adjustment is made by electrostatically steering the beam, while cross-wafer beam parallelism is adjusted by changing the focus of the electrostatic parallelizing lens (P-lens). In the vertical direction, the beam angle is measured through a high aspect ratio mask, and any angle adjustment is made by slightly tilting the wafer platen prior to implant. A variety of tests were run to measure the accuracy and repeatability of Optima MDxt's angle control. SIMS profiles of a high energy, channeling sensitive condition show both the cross-wafer angle uniformity, along with the small-angle resolution of the system. Angle repeatability was quantified by running a channeling sensitive implant as a regular monitor over a seven month period and measuring the sheet resistance-to-angle sensitivity. Even though crystal cut error was not controlled for in this case, when attributing all Rs variation to angle changes, the overall angle repeatability was measured as 0.16 Degree-Sign (1{sigma}). A separate angle repeatability test involved running a series of V-curves tests over a four month period using low crystal cut wafers selected from the same boule. The results of this test showed the angle repeatability to be <0.1 Degree-Sign (1{sigma}).

43 PARTICLE ACCELERATORS↗

Revisiting the mechanisms involved in Line Width Roughness smoothing of 193 nm photoresist patterns during HBr plasma treatment

HBr plasma treatments are widely used in nanoscale lithographic technologies to increase the plasma etch resistance of 193 nm photoresist masks as well as to decrease their Line Width Roughness (LWR). VUV irradiation of the photoresist is known to play a major role in this process by inducing polymer chains rearrangement and finally LWR reduction. However, in the plasma environment (i.e., with radical and ion bombardment), the interaction layer formed at the resist surface perturbs this mechanism and a lower LWR reduction is achieved compared to VUV only treatment. So far the nature of the interaction layer, its formation mechanism and its relation with the resist pattern LWR were all unclear. In this paper, we show that a graphite-like layer is formed on the resist patterns by the redeposition of carbon-based species originating from the plasma dissociation of outgassed photo-etched resist moieties. We show that the presence of this layer inhibits the LWR minimization and causes an increase in the LWR when it becomes thick enough (i.e., a few nanometers). We present evidences that the difference in the mechanical properties of the graphite-like top layer which coats the resist patterns and the bulk of the resist patterns is correlated to the LWR after plasma treatment. We can conclude that the optimization of an HBr cure process relies on the minimization of the carbon redeposition while keeping a significant VUV light flux and we show that this can be achieved by using pulsed plasma processes.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Tungsten oxide proton conducting films for low-voltage transparent oxide-based thin-film transistors

Tungsten oxide (WO{sub x}) electrolyte films deposited by reactive magnetron sputtering showed a high room temperature proton conductivity of 1.38 Multiplication-Sign 10{sup -4} S/cm with a relative humidity of 60%. Low-voltage transparent W-doped indium-zinc-oxide thin-film transistors gated by WO{sub x}-based electrolytes were self-assembled on glass substrates by one mask diffraction method. Enhancement mode operation with a large current on/off ratio of 4.7 Multiplication-Sign 10{sup 6}, a low subthreshold swing of 108 mV/decade, and a high field-effect mobility 42.6 cm{sup 2}/V s was realized. Our results demonstrated that WO{sub x}-based proton conducting films were promising gate dielectric candidates for portable low-voltage oxide-based devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ambient condition laser writing of graphene structures on polycrystalline SiC thin film deposited on Si wafer

We report laser induced local conversion of polycrystalline SiC thin-films grown on Si wafers into multi-layer graphene, a process compatible with the Si based microelectronic technologies. The conversion can be achieved using a 532 nm CW laser with as little as 10 mW power, yielding {approx}1 {mu}m graphene discs without any mask. The conversion conditions are found to vary with the crystallinity of the film. More interestingly, the internal structure of the graphene disc, probed by Raman imaging, can be tuned with varying the film and illumination parameters, resembling either the fundamental or doughnut mode of a laser beam.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Nanoimprint-lithography patterned epitaxial Fe nanowire arrays with misaligned magnetocrystalline and shape anisotropies

We fabricated large area (>1 × 1 cm 2 ), epitaxial Fe nanowire arrays on MgO(001) substrates by nanoimprint lithography with a direct metallization of epitaxial materials through a metallic mask, which avoided the disadvantageous metal-etching process in conventional methods. The magnetization reversals, as revealed by magneto-optic Kerr effect, showed competing effects between Fe cubic magnetocrystalline anisotropy and lithographically induced uniaxial shape anisotropy. Unlike the weakly induced uniaxial anisotropy observed in continuous films, both the magnitude and direction of the uniaxial shape anisotropy can be easily modulated in the nanowires. Complex magnetization reversal processes including two-step and three-step loops were observed when magnetizing the samples along different Fe cubic easy axes, respectively. Finally, these modified magnetization reversal processes were explained by the nucleation and propagation of the domain walls along the non-superimposed easy axes of the competing magnetocrystalline and shape anisotropies.

Environmental Molecular Sciences Laboratory↗

Growth mechanism of photoreduced silver nanostructures on periodically proton exchanged lithium niobate: Time and concentration dependence

Photodeposition of metallic nanostructures onto ferroelectric surfaces, which have been chemically patterned using a proton exchange process, has recently been demonstrated. By varying the molar concentration of the AgNO{sub 3} solution and the illumination time, one can determine the initial nucleation sites, control the rate of nucleation and the height of silver nanostructures formed, and study the mechanisms by which these processes occurs. The nanoparticles are found to deposit preferentially in the boundary between ferroelectric and proton exchanged regions, in an area proton exchanged via lateral diffusion under the masking layer used for chemical patterning, consistent with our previous results. Using a short illumination time (3 min), we are able to determine that the initial nucleation of the silver nanostructure, having a width of 0.17 {+-} 0.02 {mu}m and a height of 1.61 {+-} 0.98 nm, occurs near the edge of the reactive ion etched area within this lateral diffusion region. Over longer illumination times (15 min), we find that the silver deposition has spread to a width of 1.29 {+-} 0.06 {mu}m, extending across the entire lateral diffusion region. We report that at a high molar concentration of AgNO{sub 3} (10{sup -2} M), the amount of silver deposition for 5 min UV illumination is greater (2.88 {+-} 0.58 nm) compared to that at low (10{sup -4} M) concentrations (0.78 {+-} 0.35 nm), however, this is not the case for longer time periods. With increasing illumination time (15 min), experiments at 10{sup -4} M had greater overall deposition, 6.90 {+-} 1.52 nm, compared to 4.50 {+-} 0.76 nm at 10{sup -2} M. For longer exposure times (30 min) at 10{sup -2} M, the nanostructure height is 4.72 {+-} 0.59 nm, suggesting a saturation in the nanostructure height. The results are discussed in terms of the electric double layer that forms at the crystal surface. There is an order of magnitude difference between the Debye lengths for 10{sup -2} and 10{sup -4} M solutions, i.e., 3.04 vs. 30.40 nm, which suggests the Debye length plays a role in the availability of Ag{sup +} ions at the surface.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Tuning of the nucleation field in nanowires with perpendicular magnetic anisotropy

We report on domain nucleation in nanowires consisting of Co/Pt multilayers with perpendicular magnetic anisotropy that are patterned by electron-beam lithography, sputter deposition, and lift-off processing. It is found that the nucleation field can be tuned by changing the geometry of the wire ends. A reduction of the nucleation field by up to 60% is achieved when the wire ends are designed as tips. This contrasts with the behavior of wires with in-plane anisotropy where the nucleation field increases when triangular-pointed ends are used. In order to clarify the origin of the reduction of the nucleation field, micromagnetic simulations are employed. The effect cannot be explained by the lateral geometrical variation but is attributable to a local reduction of the perpendicular anisotropy caused by shadowing effects due to the resist mask during sputter deposition of the multilayer.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Design of an ultrahigh vacuum transfer mechanism to interconnect an oxide molecular beam epitaxy growth chamber and an x-ray photoemission spectroscopy analysis system

We designed a mechanism and the accompanying sample holders to transfer between a VEECO 930 oxide molecular beam epitaxy (MBE) and a PHI Versa Probe X-ray photoemission spectroscopy (XPS) chamber within a multiple station growth, processing, and analysis system through ultrahigh vacuum (UHV). The mechanism consists of four parts: (1) a platen compatible with the MBE growth stage, (2) a platen compatible with the XPS analysis stage, (3) a sample coupon that is transferred between the two platens, and (4) the accompanying UHV transfer line. The mechanism offers a robust design that enables transfer back and forth between the growth chamber and the analysis chamber, and yet is flexible enough to allow transfer between standard sample holders for thin film growth and masked sample holders for making electrical contacts and Schottky junctions, all without breaking vacuum. We used this mechanism to transfer a barium strontium titanate thin film into the XPS analysis chamber and performed XPS measurements before and after exposing the sample to the air. After air exposure, a thin overlayer of carbon was found to form and a significant shift ({approx}1 eV) in the core level binding energies was observed.

36 MATERIALS SCIENCE↗

On phase diagrams of magnetic reconnection

Recently, “phase diagrams” of magnetic reconnection were developed to graphically organize the present knowledge of what type, or phase, of reconnection is dominant in systems with given characteristic plasma parameters. Here, a number of considerations that require caution in using the diagrams are pointed out. First, two known properties of reconnection are omitted from the diagrams: the history dependence of reconnection and the absence of reconnection for small Lundquist number. Second, the phase diagrams mask a number of features. For one, the predicted transition to Hall reconnection should be thought of as an upper bound on the Lundquist number, and it may happen for considerably smaller values. Second, reconnection is never “slow,” it is always “fast” in the sense that the normalized reconnection rate is always at least 0.01. This has important implications for reconnection onset models. Finally, the definition of the relevant Lundquist number is nuanced and may differ greatly from the value based on characteristic scales. These considerations are important for applications of the phase diagrams. This is demonstrated by example for solar flares, where it is argued that it is unlikely that collisional reconnection can occur in the corona.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Quantitative magnetic imaging at the nanometer scale by ballistic electron magnetic microscopy

We demonstrate quantitative ballistic electron magnetic microscopy (BEMM) imaging of simple model Fe(001) nanostructures. We use in situ nanostencil shadow mask resistless patterning combined with molecular beam epitaxy deposition to prepare under ultra-high vacuum conditions nanostructured epitaxial Fe/Au/Fe/GaAs(001) spin-valves. In this epitaxial system, the magnetization of the bottom Fe/GaAs(001) electrode is parallel to the [110] direction, defining accurately the analysis direction for the BEMM experiments. The large hot-electron magnetoresistance of the Fe/Au/Fe/GaAs(001) epitaxial spin-valve allows us to image various stable magnetic configurations on the as-grown Fe(001) microstructures with a high sensitivity, even for small misalignments of both magnetic electrodes. The angular dependence of the hot-electron magnetocurrent is used to convert magnetization maps calculated by micromagnetic simulations into simulated BEMM images. The calculated BEMM images and magnetization rotation profiles show quantitative agreement with experiments and allow us to investigate the magnetic phase diagram of these model Fe(001) microstructures. Finally, magnetic domain reversals are observed under high current density pulses. This opens the way for further BEMM investigations of current-induced magnetization dynamics.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Nucleation of single GaN nanorods with diameters smaller than 35 nm by molecular beam epitaxy

Nucleation mechanism of catalyst-free GaN nanorod grown on Si(111) is investigated by the fabrication of uniform and narrow (<35 nm) nanorods without a pre-defined mask by molecular beam epitaxy. Direct evidences show that the nucleation of GaN nanorods stems from the sidewall of the underlying islands down to the Si(111) substrate, different from commonly reported ones on top of the island directly. Accordingly, the growth and density control of the nanorods is exploited by a “narrow-pass” approach that only narrow nanorod can be grown. The optimal size of surrounding non-nucleation area around single nanorod is estimated as 88 nm.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Mechanical-plowing-based high-speed patterning on hard material via advanced-control and ultrasonic probe vibration

In this paper, we present a high-speed direct pattern fabrication on hard materials (e.g., a tungsten-coated quartz substrate) via mechanical plowing. Compared to other probe-based nanolithography techniques based on chemical- and/or physical-reactions (e.g., the Dip-pen technique), mechanical plowing is meritorious for its low cost, ease of process control, and capability of working with a wide variety of materials beyond conductive and/or soft materials. However, direct patterning on hard material faces two daunting challenges. First, the patterning throughput is ultimately hindered by the “writing” (plowing) speed, which, in turn, is limited by the adverse effects that can be excited/induced during high-speed, and/or large-range plowing, including the vibrational dynamics of the actuation system (the piezoelectric actuator, the cantilever, and the mechanical fixture connecting the cantilever to the actuator), the dynamic cross-axis coupling between different axes of motion, and the hysteresis and the drift effects related to the piezoelectric actuators. Secondly, it is very challenging to directly pattern on ultra-hard materials via plowing. Even with a diamond probe, the line depth of the pattern via continuous plowing on ultra-hard materials such as tungsten, is still rather small (<0.5 nm), particularly when the “writing” speed becomes high. To overcome these two challenges, we propose to utilize a novel iterative learning control technique to achieve precision tracking of the desired pattern during high-speed, large-range plowing, and introduce ultrasonic vibration of the probe in the normal (vertical) direction during the plowing process to enable direct patterning on ultra hard materials. The proposed approach was implemented to directly fabricate patterns on a mask with tungsten coating and quartz substrate. The experimental results demonstrated that a large-size pattern of four grooves (20 μm in length with 300 nm spacing between lines) can be fabricated at a high speed of ∼5 mm/s, with the line width and the line depth at ∼95 nm and 2 nm, respectively. A fine pattern of the word “NANO” is also fabricated at the speed of ∼5 mm/s.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗