Search NASA⌕ Search

SEARCH · Search NASA

Results for “Model Coupling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,783 records · Page 99

The Effect of Internal Variability on Ocean Temperature Adjustment in a Low-Resolution CESM Initial Condition Ensemble

Due to its large heat capacity and circulation, the ocean contributes significantly to global heat uptake, global heat transport, spatial temperature patterns, and variability. Quantifying ocean heat uptake across different temporal and spatial scales is important to quantify Earth's climate response to anthropogenic warming. Here we evaluate ocean adjustment time scales from two different fully coupled climate model ensembles using the Community Earth System Model. Both ensembles use the same model version, anthropogenic and natural forcings, and coupling configurations, but we initialize the ensembles in two different ways: (1) sampling joint internal variability of the ocean–atmosphere system (unique atmosphere and ocean conditions) and (2) sampling the internal variability of the atmosphere only (unique atmosphere, identical ocean conditions). Uncertainty due to internal variability is used as a proxy to quantify the time scales of ocean temperature adjustment at different depths and basins in Community Earth System Model. Time scales of equilibration are longer in the deep ocean than the upper ocean, highlighting the vertical structure of dynamic adjustment. The Atlantic equilibrates on shorter time scales (82 years above 1,000 m, 140 years below 1,000 m) relative to the Pacific (106 years above 1,000 m, 444 years below 1,000 m) in Community Earth System Model due to the large North Atlantic Deep Water formation and strong overturning circulation in the Atlantic. These results have broad implications for analyzing internal climate variability, ocean adjustment, and drift in global coupled model experiments and intercomparisons.

54 ENVIRONMENTAL SCIENCES↗

Additive effects of acidification and mineralogy on calcium isotopes in Triassic/Jurassic boundary limestones

The end-Triassic mass extinction coincided with a negative δ 13 C excursion, consistent with release of 13 C-depleted CO 2 from the Central Atlantic Magmatic Province. However, the amount of carbon released and its effects on ocean chemistry are poorly constrained. The co upled nature of the carbon and calcium cycles allows calcium isotopes to be used for constraining carbon cycle dynamics and vice versa. We present a high-resolution calcium isotope (δ 44/40 Ca) record from 100 m of marine limestone spanning the Triassic/Jurassic boundary in two stratigraphic sections from northern Italy. Immediately above the extinction horizon and the associated negative excursion in δ 13 C, δ 44/40 Ca decreases by ca. 0.8‰ in 20 m of section and then recovers to preexcursion values. Coupled numerical models of the geological carbon and calcium cycles demonstrate that this δ 44/40 Ca excursion is too large to be explained by changes to seawater δ 44/40 Ca alone, regardless of CO 2 injection volume and duration. Less than 20% of the δ 44/40 Ca excursion can be attributed to acidification. The remaining 80% likely reflects a higher proportion of aragonite in the original sediment, based largely on high concentrations of Sr in the samples. Our study demonstrates that coupled models of the carbon and calcium cycles have the potential to help distinguish contributions of primary seawater isotopic changes from local or diagenetic effects on the δ 44/40 Ca of carbonate sediments. Finally, differentiating between these effects is critical for constraining the impact of ocean acidification during the end-Triassic mass extinction, as well as for interpreting other environmental events in the geologic past.

58 GEOSCIENCES↗

Multilepton signatures of a hidden sector in rare B decays

We explore the sensitivity of flavor-changing b{yields}s transitions to a (sub-) GeV hidden sector with generic couplings to the standard model through the Higgs, vector, and axion portals. The underlying two-body decays of B mesons, B{yields}X{sub s}S, and B{sup 0}{yields}SS, where S denotes a generic new GeV-scale particle, may significantly enhance the yield of monochromatic lepton pairs in the final state via prompt S{yields}ll decays. Existing measurements of the charged lepton spectrum in neutral-current semileptonic B decays provide bounds on the parameters of the light sector that are significantly more stringent than the requirements of naturalness. New search modes, such as B{yields}X{sub s}+n(ll) and B{sup 0}{yields}n(ll) with n{>=}2, can provide additional sensitivity to scenarios in which both the Higgs and vector portals are active, and are accessible to (super-) B factories and hadron colliders.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Dissipation Scaled Internal Wave Drag in a Global Heterogeneously Coupled Internal/External Mode Total Water Level Model

This study showcases a global, heterogeneously coupled total water level system wherein salinity and temperature outputs from a coarser-resolution (~12 km) ocean general circulation model are used to calculate density-driven terms within a global, higher-resolution (~2.5 km) depth-averaged total water level model. We demonstrate that the inclusion of baroclinic forcing in the barotropic model requires modification of the internal wave drag term to prevent excess degradation of tidal results compared to the barotropic model. By scaling the internal tide dissipation by an easy to calculate dissipation ratio, the resulting heterogeneously coupled model has complex root mean square errors (RMSE) of 2.27 cm in the deep ocean and 12.16 cm in shallow waters for the M 2 tidal constituent. While this represents a 10%–20% deterioration as compared to the barotropic model, the improvements in total water level prediction more than offset this degradation. Global median RMSE compared to observations of total water levels, 30-day sea levels, and non-tidal residuals improve by 1.86 (18.5%), 2.55 (42.5%), and 0.36 (5.3%) cm respectively. The drastic improvement in model performance highlights the importance of including density-driven effects within global hydrodynamic models and will help to improve the results of both hindcasts and forecasts in modeling extreme and nuisance flooding. With only an 11% increase in model run time compared to the fully barotropic total water level model, this approach paves the way for high resolution coastal water level and flood models to be used alongside climate models, improving operational forecasting of total water levels.

Blakely, Coleman Peter [University of Notre Dame, ↗

Higgs production as a probe of chameleon dark energy

In this paper we study various particle physics effects of a light, scalar dark energy field with chameleonlike couplings to matter. We show that a chameleon model with only matter couplings will induce a coupling to photons. In doing so, we derive the first microphysical realization of a chameleonic dark energy model coupled to the electromagnetic field strength. This analysis provides additional motivation for current and near-future tests of axionlike and chameleon particles. We find a new bound on the coupling strength of chameleons in uniformly coupled models. We also study the effect of chameleon fields on Higgs production, which is relevant for hadron colliders. These are expected to manufacture Higgs particles through weak boson fusion, or associated production with a Z or W{sup {+-}.} We show that, like the Tevatron, the LHC will not be able to rule out or observe chameleons through this mechanism, because gauge invariance of the low energy Lagrangian suppresses the corrections that may arise.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE WPTO FY2021 Seedling End Report: Coupling Soil-Foundation Models to MHK Device Dynamic Models to Tighten the Design Envelope

The purpose of this Seedling project is to couple a marine renewable energy (MRE) dynamics simulation software with the soil-foundation models in the OC6 Phase II project [Bergua et al., 2021] and evaluate the software’s performance. This is a first step to accurately evaluating soil-foundation impacts on other types of MRE, like wave or current energy converters (WECs, CECs). OC6 Phase II compares offshore wind turbine (OWT) simulations using several different soil-foundation models to identify and fill key gaps in soil-foundation analyses. WEC-Sim was chosen to model the OC6 Phase II offshore wind turbine and various load cases because of its adaptability, accuracy of hydrodynamic loads, and ability to apply an arbitrary wind loading. Of the four methods used in OC6, the apparent fixity soil-foundation method was coupled with WEC-Sim. Technical challenges with flexible hydrodynamic bodies, added mass and external function libraries inhibited the ability to compare the WEC-Sim results to other OC6 participants. These challenges required that the WEC-Sim model of the OC6 OWT use a combination of rigid and flexible bodies to ensure a numerically stable solution. The rigid monopile creates a more stiff system and causes smaller amplitude motion under hydrodynamic loading and higher dominant frequency of motion under wind loading. These discrepancies are expected based on the increased stiffness of the WEC-Sim case.

16 TIDAL AND WAVE POWER↗

Elastic Flow Modeling for Hydropower Digital Twins

This report details the elastic, unsteady, one-dimensional flow equations that are used to model flow through a penstock in a hydropower facility. The elastic flow model is accurate even in cases of fast transients, long penstock length, and high gravitation head. The compressibility of the water and elasticity of the pipe walls are explicitly accounted for in the developed models so that the water hammer phenomena can be accurately captured. The elastic flow model is coupled to a mechanistic turbine model to resolve the dynamic feedbacks between the elastic water column and the turbine rotation rate. A finite volume method is employed to solve the governing equations, and the method is shown to have low numerical diffusion in sharp gradient phenomena, such as those encountered when simulating water hammer. The method is applied to single dimensional linear advection benchmark problem and numerical results are compared with analytic results. This is followed on by an application to a full hydropower system with a coupled turbine. The elastic flow model results are compared against an inelastic model.

13 HYDRO ENERGY↗

Efficient simulation of relativistic fermions via vertex models

We have developed an efficient simulation algorithm for strongly interacting relativistic fermions in two-dimensional field theories based on a formulation as a loop gas. It essentially eliminates critical slowing down by sampling two-point correlation functions and allows simulations directly in the massless limit at the critical point. It generates loop configurations with fluctuating topological boundary conditions enabling one to simulate fermions with arbitrary periodic or antiperiodic boundary conditions. As illustrative examples, the algorithm is applied to the Gross-Neveu model and to the Schwinger model in the strong coupling limit.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Analysis and Simulation of One-Dimensional Transport Models for Lithium Symmetric Cells

The main objective of this paper is to analyze transport models for lithium symmetric cells and arrive at an efficient model and code to simulate the same. Two one-dimensional models are considered. The first model uses the dilute solution Nernst–Planck equations in conjunction with the electroneutrality assumption (EN-NP model). For binary electrolytes, an analytical solution for electrolyte concentration is derived and compared with numerical solutions by an approximate finite volume method. The second approach relaxes the electroneutrality assumption by way of Poisson’s equation for the electrostatic potential (PNP model). The computational difficulties of the PNP model are tackled using the approximate finite volume method, with demonstrated convergence characteristics even with bulk dimensions several orders of magnitude larger than the characteristic double layer size. A robust code is developed for the PNP model. The computationally efficient transport models can facilitate simulations, physical understanding, and analysis. This is illustrated by a case study in which these models are coupled with modified kinetic models, which are then parameterized with experimental voltage response data using a systems-level approach. The estimated parameters provide further insight into the electrochemical phenomena underpinning voltage transitions in symmetric cells.

25 ENERGY STORAGE↗

TChem-atm v1.0

SAND2024-11300O TChem-atm is a software library that was developed to solve complex kinetic models for atmospheric chemistry applications. TChem-atm interface employs a hierarchical parallelism design to exploit the massive parallelism available from modern computing platforms. It also supports gas atmospheric chemistry applications, e.g., the energy exascale earth system model. TChem can be used as a box model or coupled with a climate model to compute the time evolution of gas tracer species. Sandia National Laboratories is a multimission laboratory managed and operated by National Technology & Engineering Solutions of Sandia, LLC, a wholly owned subsidiary of Honeywell International Inc., for the U.S. Department of Energy’s National Nuclear Security Administration under contract DE-NA0003525.

Safta, Cosmin↗

Do land surface models need to include differential plant species responses to drought? Examining model predictions across a mesic-xeric gradient in Europe

Future climate change has the potential to increase drought in many regions of the globe, making it essential that land surface models (LSMs) used in coupled climate models realistically capture the drought responses of vegetation. Recent data syntheses show that drought sensitivity varies considerably among plants from different climate zones, but state-of-the-art LSMs currently assume the same drought sensitivity for all vegetation. We tested whether variable drought sensitivities are needed to explain the observed large-scale patterns of drought impact on the carbon, water and energy fluxes. We implemented data-driven drought sensitivities in the Community Atmosphere Biosphere Land Exchange (CABLE) LSM and evaluated alternative sensitivities across a latitudinal gradient in Europe during the 2003 heatwave. The model predicted an overly abrupt onset of drought unless average soil water potential was calculated with dynamic weighting across soil layers. We found that high drought sensitivity at the most mesic sites, and low drought sensitivity at the most xeric sites, was necessary to accurately model responses during drought. Furthermore, our results indicate that LSMs will over-estimate drought impacts in drier climates unless different sensitivity of vegetation to drought is taken into account.

54 ENVIRONMENTAL SCIENCES↗

SUHMO: an adaptive mesh refinement SUbglacial Hydrology MOdel v1.0

Abstract. Water flowing under ice sheets and glaciers can have a strong influence on ice dynamics, particularly through pressure changes, suggesting that a comprehensive ice sheet model should include the effect of basal hydrology. Modeling subglacial hydrology remains a challenge, however, mainly due to the range of spatial and temporal scales involved – from subglacial channels to vast subglacial lakes. Additionally, networks of subglacial drainage channels dynamically evolve over time. To address some of these challenges, we have developed an adaptive mesh refinement (AMR) model based on the Chombo software framework. We extend the model proposed by Sommers et al. (2018) with a small but significant change to accommodate the transition from unresolved to resolved flow features. We handle the strong nonlinearities present in the equations by resorting to an efficient nonlinear full approximation scheme multigrid (FAS-MG) algorithm. We outline the details of the algorithm and present convergence analysis results demonstrating its good performance. Additionally, we present results validating our approach, using test cases from the Subglacial Hydrology Model Intercomparison Project (SHMIP) (de Fleurian et al., 2018). We finish by presenting a more complex, 100 km-by-100 km synthetic test case with peaks and valleys that we use to investigate the effective pressure distribution as the number of AMR levels increases. These preliminary results suggest that a minimum spatial resolution is needed to properly capture channel features, but additional work is required to precisely quantify this and its impact on accurately modeling the coupled ice sheet–hydrology system. The efficiency of our approach, relying on localized refinement, is also demonstrated. Future work will include coupling the SUbglacial Hydrology MOdel (SUHMO) with the BISICLES AMR ice sheet model (Cornford et al., 2013), both built on the same numerical framework.

58 GEOSCIENCES↗

Near-Surface Hydrology and Soil Properties Drive Heterogeneity in Permafrost Distribution, Vegetation Dynamics, and Carbon Cycling in a Sub-Arctic Watershed: Modeling Archive

This Modeling Archive is in support of a NGEE-Arctic publication: Shirley et al. (2022) “Near-Surface Hydrology and Soil Properties Drive Heterogeneity in Permafrost Distribution, Vegetation Dynamics, and Carbon Cycling in a Sub-Arctic Watershed". [DOI].The dataset contains outputs from the global sensitivity analysis (GSA) of the “ecosys” model as reported in Shirley et al. (2022). The study showed that discontinuous permafrost environments are characterized by complex feedback loops and strong spatial heterogeneity which is created by variability in near-surface hydrology and soil properties. Additionally, the study demonstrated that missing representation of sub-grid heterogeneity in terrestrial ecosystem models can lead to biased estimates of the high-latitude carbon budget. Included in this dataset are the factor values for each run in the GSA and the model outputs used in this study. Included are two *.csv data files and one *.pdf.The Next-Generation Ecosystem Experiments: Arctic (NGEE Arctic), was a research effort to reduce uncertainty in Earth System Models by developing a predictive understanding of carbon-rich Arctic ecosystems and feedbacks to climate. NGEE Arctic was supported by the Department of Energy's Office of Biological and Environmental Research.The NGEE Arctic project had two field research sites: 1) located within the Arctic polygonal tundra coastal region on the Barrow Environmental Observatory (BEO) and the North Slope near Utqiagvik (Barrow), Alaska and 2) multiple areas on the discontinuous permafrost region of the Seward Peninsula north of Nome, Alaska.Through observations, experiments, and synthesis with existing datasets, NGEE Arctic provided an enhanced knowledge base for multi-scale modeling and contributed to improved process representation at global pan-Arctic scales within the Department of Energy's Earth system Model (the Energy Exascale Earth System Model, or E3SM), and specifically within the E3SM Land Model component (ELM).

54 ENVIRONMENTAL SCIENCES↗

A Machine Learning-Assisted Framework to Control Thermally Anisotropic Building Envelopes in Residential Buildings

To curb the energy consumption of buildings and their related CO2 emissions, Oak Ridge National Laboratory (ORNL) has developed the thermally anisotropic building envelope (TABE) —a multi-layer design comprising insulation materials and metal foils connected to thermal loops. In this study, a machine learning-assisted framework was developed to control the TABE in residential buildings to reduce the computation load for future optimal rule-based control and application. First, a 2D finite element model was established in COMSOL to calculate the hourly heat flux through exterior walls installed with the TABE. Then, TABE wall heat fluxes were simulated for various given indoor and outdoor boundary conditions, as well as thermal loops fluid temperatures and flow rates. Since the finite element simulations are computationally expensive, an artificial neural network (ANN) was then trained to use as a proxy of the finite element (COMSOL) modeling. Finally, the trained ANN model was coupled with the EnergyPlus model to predict the energy consumption of a US Department of Energy prototype single-family house installed with the TABE. An optimal simple rule-based control was determined from predefined rules for a case study. The results demonstrate that the developed machine learning–assisted framework can reduce 99.9% of the computation time while efficiently managing residential building energy for installed TABE walls.

Shen, Zhenglai↗