Search NASA⌕ Search

SEARCH · Search NASA

Results for “Nonlinear processes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,783 records · Page 99

Forecasting of Storm-Surge Floods Using ADCIRC and Optimized DEMs

Increasing the accuracy of storm-surge flood forecasts is essential for improving preparedness for hurricanes and other severe storms and, in particular, for optimizing evacuation scenarios. An interactive database, developed by WorldWinds, Inc., contains atlases of storm-surge flood levels for the Louisiana/Mississippi gulf coast region. These atlases were developed to improve forecasting of flooding along the coastline and estuaries and in adjacent inland areas. Storm-surge heights depend on a complex interaction of several factors, including: storm size, central minimum pressure, forward speed of motion, bottom topography near the point of landfall, astronomical tides, and, most importantly, maximum wind speed. The information in the atlases was generated in over 100 computational simulations, partly by use of a parallel-processing version of the ADvanced CIRCulation (ADCIRC) model. ADCIRC is a nonlinear computational model of hydrodynamics, developed by the U.S. Army Corps of Engineers and the US Navy, as a family of two- and three-dimensional finite-element-based codes. It affords a capability for simulating tidal circulation and storm-surge propagation over very large computational domains, while simultaneously providing high-resolution output in areas of complex shoreline and bathymetry. The ADCIRC finite-element grid for this project covered the Gulf of Mexico and contiguous basins, extending into the deep Atlantic Ocean with progressively higher resolution approaching the study area. The advantage of using ADCIRC over other storm-surge models, such as SLOSH, is that input conditions can include all or part of wind stress, tides, wave stress, and river discharge, which serve to make the model output more accurate. To keep the computational load manageable, this work was conducted using only the wind stress, calculated by using historical data from Hurricane Camille, as the input condition for the model. Hurricane storm-surge simulations were performed on an eight-node Linux computer cluster. Each node contained dual 2-GHz processors, 2GB of memory, and a 40GB hard drive. The digital elevation model (DEM) for this region was specified using a combination of Navy data (over water), NOAA data (for the coastline), and optimized Interferometric Synthetic Aperture Radar data (over land). This high-resolution topographical data of the Mississippi coastal region provided the ADCIRC model with improved input with which to calculate improved storm-surge forecasts.

Valenti, Elizabeth↗

Improving Plating by Use of Intense Acoustic Beams

An improved method of selective plating of metals and possibly other materials involves the use of directed high-intensity acoustic beams. The beams, typically in the ultrasonic frequency range, can be generated by fixed-focus transducers (see figure) or by phased arrays of transducers excited, variously, by continuous waves, tone bursts, or single pulses. The nonlinear effects produced by these beams are used to alter plating processes in ways that are advantageous.

Oeftering, Richard C.↗

Robust Informatics Infrastructure Required For ICME: Combining Virtual and Experimental Data

With the increased emphasis on reducing the cost and time to market of new materials, the need for robust automated materials information management system(s) enabling sophisticated data mining tools is increasing, as evidenced by the emphasis on Integrated Computational Materials Engineering (ICME) and the recent establishment of the Materials Genome Initiative (MGI). This need is also fueled by the demands for higher efficiency in material testing; consistency, quality and traceability of data; product design; engineering analysis; as well as control of access to proprietary or sensitive information. Further, the use of increasingly sophisticated nonlinear, anisotropic and or multi-scale models requires both the processing of large volumes of test data and complex materials data necessary to establish processing-microstructure-property-performance relationships. Fortunately, material information management systems have kept pace with the growing user demands and evolved to enable: (i) the capture of both point wise data and full spectra of raw data curves, (ii) data management functions such as access, version, and quality controls;(iii) a wide range of data import, export and analysis capabilities; (iv) data pedigree traceability mechanisms; (v) data searching, reporting and viewing tools; and (vi) access to the information via a wide range of interfaces. This paper discusses key principles for the development of a robust materials information management system to enable the connections at various length scales to be made between experimental data and corresponding multiscale modeling toolsets to enable ICME. In particular, NASA Glenn's efforts towards establishing such a database for capturing constitutive modeling behavior for both monolithic and composites materials

Mutli-scale models↗

Compressive Loading and Modeling of Stitched Composite Stiffeners

A series of single-frame and single-stringer compression tests were conducted at NASA Langley Research Center on specimens harvested from a large panel built using the Pultruded Rod Stitched Efficient Unitized Structure (PRSEUS) concept. Different frame and stringer designs were used in fabrication of the PRSEUS panel. In this paper, the details of the experimental testing of single-frame and single-stringer compression specimens are presented, as well as discussions on the performance of the various structural configurations included in the panel. Nonlinear finite element models were developed to further understand the failure processes observed during the experimental campaign.

Leone, Frank A., Jr.↗

Influence of Stationary Crossflow Modulation on Secondary Instability

A likely scenario for swept wing transition on subsonic aircraft with natural laminar flow involves the breakdown of stationary crossflow vortices via high frequency secondary instability. A majority of the prior research on this secondary instability has focused on crossflow vortices with a single dominant spanwise wavelength. This paper investigates the effects of the spanwise modulation of stationary crossflow vortices at a specified wavelength by a subharmonic stationary mode. Secondary instability of the modulated crossflow pattern is studied using planar, partial-differential-equation based eigenvalue analysis. Computations reveal that weak modulation by the first subharmonic of the input stationary mode leads to mode splitting that is particularly obvious for Y-type secondary modes that are driven by the wall-normal shear of the basic state. Thus, for each Y mode corresponding to the fundamental wavelength of results in unmodulated train of crossflow vortices, the modulated flow supports a pair of secondary modes with somewhat different amplification rates. The mode splitting phenomenon suggests that a more complex stationary modulation such as that induced by natural surface roughness would yield a considerably richer spectrum of secondary instability modes. Even modest levels of subharmonic modulation are shown to have a strong effect on the overall amplification of secondary disturbances, particularly the Z-modes driven by the spanwise shear of the basic state. Preliminary computations related to the nonlinear breakdown of these secondary disturbances provide interesting insights into the process of crossflow transition in the presence of the first subharmonic of the dominant stationary vortex.

Vortex structure↗

Separation of current density and electric field domains caused by nonlinear electronic instabilities

In 1963 Ridley postulated that under certain bias conditions circuit elements exhibiting a current- or voltage-controlled negative differential resistance will separate into coexisting domains with different current densities or electric fields, respectively, in a process similar to spinodal decomposition of a homogeneous liquid or disproportionation of a metastable chemical compound. The ensuing debate, however, failed to agree on the existence or causes of such electronic decomposition. Using thermal and chemical spectro-microscopy, we directly imaged signatures of current-density and electric-field domains in several metal oxides. The concept of local activity successfully predicts initiation and occurrence of spontaneous electronic decomposition, accompanied by a reduction in internal energy, despite unchanged power input and heat output. This reveals a thermodynamic constraint required to properly model nonlinear circuit elements. Our results explain the electroforming process that initiates information storage via resistance switching in metal oxides and has significant implications for improving neuromorphic computing based on nonlinear dynamical devices.

42 ENGINEERING↗

Generalized Modular Representation Framework for the Synthesis of Extractive Separation Systems

In this work, a systematic process synthesis and intensification method is presented for extractive separation based on the Generalized Modular Representation Framework (GMF). GMF employs a mass/heat exchange module-based superstructure representation, incorporating detailed thermodynamic model, to investigate conventional or intensified process options for nonideal azeotropic separation without a pre-postulation of plausible unit/flowsheet configurations. Orthogonal Collocation is also applied to enhance GMF representation to obtain intra-module operation information and module dimensionality estimation while maintaining model size compactness. Furthermore, entrainer selection, process synthesis, design, and intensification are examined within a single mixed-integer nonlinear optimization (MINLP) problem. A case study on the separation of ethanol-water mixture is presented to highlight the potential of the proposed approach in deriving optimal and verifiable extractive separation systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Application of nonlinear photonic crystal ring resonators in realizing all optical OR/NOT/AND gates

Arithmetic logic unit (ALU) is the core of any digital processing systems. For creating an all optical ALU one needs basic logic gates such as optical NOT, OR and AND gates along with an optical full adder and optical multiplexer. In this paper we aim to design and propose these three basic logic gates using nonlinear photonic crystal ring resonators. The simulations will be done using plane wave expansion and finite difference time domain methods. The proposed structures work based on controlling the optical behavior of the nonlinear resonators using optical power. The simulation results show that the switching threshold for this resonant ring is about 15 mW/μm{sup 2}. Reduced delay times and switching optical power are the main advantages of the proposed structures. Also by adding two resonant rings in input ports we reduced the cross reflection between the input ports.

42 ENGINEERING↗

Baseband pulse shaping techniques for nonlinearly amplified pi/4-QPSK and QAM systems

A new generation of multi-stage pi/4-shifted QPSK and of superposed quadrature-amplitude-modulated (SQAM) modulators-coherent demodulators (modems) and of continuous phase modulated (CPM)-gaussian premodulation filtered minimum-shift-keying (MGMSK) systems is proposed and studied. These modems will lead to bandwidth and power efficient satellite communications systems designs. As an illustrative application, a baseband processing technique pi/4-controlled transition PSK (pi/4-CTPSK) is described. To develop a cost and power efficient design strategy, we assume that nonlinear, fully saturated high power amplifiers (HPA) are utilized in the satellite earth station transmitter and in the satellite transponder. Modem structures which could lead to application specific integrated circuit (ASIC) satellite on-board processing universal modem applications are also considered. Multistate GMSK (i.e., MGMSK) signal generation methods by means of two or more RF combined nonlinearly amplified SQAM modems and by one multistate (in-phase and quadrature-baseband premodulation filtered-superposed) SQAM architecture and one RF nonlinear amplifier are studied. During the SQAM modem development phase we investigate the potential system advantages of the pi/4-shifted logic. The bandwidth efficiency of the proposed multistate GMSK and baseband filtered PAM-FM modulator (a new class in the CPM family) will be significantly higher than that of conventional G-MSK systems. To optimize the practical P(sub e) = f((E sub b)/(N sub o)) performance we consider improved coherent demodulation MGMSK structures such as deviated-frequency locking coherent demodulators. For relative low bit rate SATCOM applications, e.g., bit rates less than 300 kb/s, phase noise tracking cancellation (for fixed site earth station) and phase noise cancellation as well as Doppler compensation (for satellite to mobile earth station) applications may be required. We study digital channel sounding methods which could cancel the phase noise-caused degradations of CPM and GMSK modems.

Feher, Kamilo↗

JET-ILW Nonlinear Pedestal ETG Data

Contains data for paper on nonlinear pedestal electron-temperature-gradient turbulence simulations: *.py # python plotting scripts for generating paper plots. *.txt, *.npy # post-processed data required for plotting scripts. *.png, *.eps, *.pdf # paper plots. *.in # gs2 and stella input files for simulations in this paper. stella used for nonlinear simulations (https://github.com/mabarnes/stella)

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Processing CCD Images to Detect Transits of Earth-Sized Planets: Maximizing Sensitivity While Achieving Reasonable Downlink Requirements

We have performed end-to-end laboratory and numerical simulations to demonstrate the capability of differential photometry under realistic operating conditions to detect transits of Earth-sized planets orbiting solar-like stars. Data acquisition and processing were conducted using the same methods planned for the proposed Kepler Mission. These included performing aperture photometry on large-format CCD images of an artificial star fields obtained without a shutter at a readout rate of 1 megapixel/sec, detecting and removing cosmic rays from individual exposures and making the necessary corrections for nonlinearity and shutterless operation in the absence of darks. We will discuss the image processing tasks performed `on-board' the simulated spacecraft, which yielded raw photometry and ancillary data used to monitor and correct for systematic effects, and the data processing and analysis tasks conducted to obtain lightcurves from the raw data and characterize the detectability of transits. The laboratory results are discussed along with the results of a numerical simulation carried out in parallel with the laboratory simulation. These two simulations demonstrate that a system-level differential photometric precision of 10-5 on five- hour intervals can be achieved under realistic conditions.

Earth-size planets↗

On Two-Scale Modelling of Heat and Mass Transfer

Modelling of macroscopic behaviour of materials, consisting of several layers or components, whose microscopic (at least stochastic) analysis is available, as well as (more general) simulation of non-local phenomena, complicated coupled processes, etc., requires both deeper understanding of physical principles and development of mathematical theories and software algorithms. Starting from the (relatively simple) example of phase transformation in substitutional alloys, this paper sketches the general formulation of a nonlinear system of partial differential equations of evolution for the heat and mass transfer (useful in mechanical and civil engineering, etc.), corresponding to conservation principles of thermodynamics, both at the micro- and at the macroscopic level, and suggests an algorithm for scale-bridging, based on the robust finite element techniques. Some existence and convergence questions, namely those based on the construction of sequences of Rothe and on the mathematical theory of two-scale convergence, are discussed together with references to useful generalizations, required by new technologies.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Nonlinear optical properties and supercontinuum spectrum of titania-modified carbon quantum dots

We have studied the nonlinear optical properties and supercontinuum spectrum of solutions of carbon quantum dots prepared by a hydrothermal process from chitin and then coated with titania. The titania coating has been shown to have an activating effect on the carbon quantum dots, enhancing supercontinuum generation in the blue-violet spectral region and enabling their nonlinear optical characteristics to be varied. (extreme laser radiation: physics and fundamental applications)

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Understanding the formation and evolution of interstellar ices: a Bayesian approach

Understanding the physical conditions of dark molecular clouds and star-forming regions is an inverse problem subject to complicated chemistry that varies nonlinearly with both time and the physical environment. In this paper, we apply a Bayesian approach based on a Markov chain Monte Carlo (MCMC) method for solving the nonlinear inverse problems encountered in astrochemical modeling. We use observations for ice and gas species in dark molecular clouds and a time-dependent, gas-grain chemical model to infer the values of the physical and chemical parameters that characterize quiescent regions of molecular clouds. We show evidence that in high-dimensional problems, MCMC algorithms provide a more efficient and complete solution than more classical strategies. The results of our MCMC method enable us to derive statistical estimates and uncertainties for the physical parameters of interest as a result of the Bayesian treatment.

79 ASTRONOMY AND ASTROPHYSICS↗

Nonlinear theory of resonant slow waves in anisotropic and dispersive plasmas

The solar corona is a typical example of a plasma with strongly anisotropic transport processes. The main dissipative mechanisms in the solar corona acting on slow magnetoacoustic waves are the anisotropic thermal conductivity and viscosity [Ballai et al., Phys. Plasmas 5, 252 (1998)] developed the nonlinear theory of driven slow resonant waves in such a regime. In the present paper the nonlinear behavior of driven magnetohydrodynamic waves in the slow dissipative layer in plasmas with strongly anisotropic viscosity and thermal conductivity is expanded by considering dispersive effects due to Hall currents. The nonlinear governing equation describing the dynamics of nonlinear resonant slow waves is supplemented by a term which describes nonlinear dispersion and is of the same order of magnitude as nonlinearity and dissipation. The connection formulas are found to be similar to their nondispersive counterparts.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Statistical mechanics of neocortical interactions - Dynamics of synaptic modification

A recent study has demonstrated that several scales of neocortical interactions can be consistently analyzed with the use of methods of modern nonlinear nonequilibrium statistical mechanics. The formation, stability, and interaction of spatial-temporal patterns of columnar firings are explicitly calculated, to test hypothesized mechanisms relating to information processing. In this context, most probable patterns of columnar firings are associated with chemical and electrical synaptic modifications. It is stressed that synaptic modifications and shifts in most-probable firing patterns are highly nonlinear and interactive sets of phenomena. A detailed scenario of information processing is calculated of columnar coding of external stimuli, short-term storage via hysteresis, and long-term storage via synaptic modification.

Ingber, L.↗

One-step nonlinear electrochemical synthesis of Te x S y @PANI nanorod materials for Li-Te x S y battery

We report that as a promising cathode material for rechargeable lithium ion batteries, tellurium has attracted a great deal of attention due to its high conductivity and high theoretical capacity. Yet, the large volume expansion (~104 vol%) during Li-Te alloying process prevents the application of Li-Te battery. Here, by using a novel one-step nonlinear electrochemical approach, we prepared a Te x S y @polyaniline nanorod composites, in which elemental sulfur is successfully embedded into tellurium matrix to effectively tackle the volumetric variation problem. In situ transmission electron microscopy (TEM) of the Li-Te (de)alloying process on single Te x S y @polyaniline particle demonstrated that the volumetric variation was efficiently suppressed in comparison to the situation of pristine Te particles. Moreover, polyaniline binder effectively trapped Te and sulfur species in its network and guaranteed stable electric contact and fast transport of Li ions, which resulted in significant improvement of the battery performance. Interestingly, the as-obtained composites display a high initial capacity of 1141 mA h g -1 with typical Li-S battery characteristics at a low current density of 0.1 A g -1 , while it shows a good cycling stability at high current density of 5 A g -1 with Li-Te battery features.

25 ENERGY STORAGE↗