Search NASA⌕ Search

SEARCH · Search NASA

Results for “Numerical approximation & analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,783 records · Page 99

Numerical procedures for the calculation of the stresses in monocoques III : calculation of the bending moments in fuselage frames

This report deals with the calculation of the bending moments in and the distortions of fuselage rings upon which known concentrated and distributed loads are acting. In the procedure suggested, the ring is divided into a number of beams each having a constant radius of curvature. The forces and moments caused in the end sections of the beams by individual unit displacements of the end sections are listed in a table designated as the operations table in conformity with Southwell's nomenclature. The operations table and the external loads are equivalent to a set of linear equations. For their solution the following three procedures are presented: 1) Southwell's method of systematic relaxations. This is a step-by-step approximation procedure guided by the physical interpretation of the changes in the values of the unknown. 2) The growing unit procedure in which the individual beams are combined successively into beams of increasing length until finally the entire ring becomes a single beam. In each step of the procedure a set of not more than three simultaneous linear equations is solved. 3) Solution of the entire set of simultaneous equations by the methods of the matrix calculus. In order to demonstrate the manner in which the calculations may be carried out, the following numerical examples are worked out: 1) Curved beam with both its end sections rigidly fixed. The load is a concentrated force. 2) Egg-shape ring with symmetric concentrated loads. 3) Circular ring with antisymmetric concentrated loads and shear flow (torsion of the fuselage). 4) Same with V-braces incorporated in the ring. 5) Egg-shape ring with antisymmetric concentrated loads and shear flow (torsion of the fuselage). 6) Same with V-braces incorporated in the ring. The results of these calculations are checked, whenever possible, by calculations carried out according to known methods of analysis. The agreement is found to be good. The amount of work necessary for the solution of ring problems by the methods described in the present report is practically independent of the degree of redundancy of the structure. For this reason the methods are recommended for use particularly in problems of rings having one or more internal bracing elements.

LOADS - FUSELAGES↗

Analytical Studies of Boundary Layer Generated Aircraft Interior Noise

An analysis is made of the "interior noise" produced by high, subsonic turbulent flow over a thin elastic plate partitioned into "panels" by straight edges transverse to the mean flow direction. This configuration models a section of an aircraft fuselage that may be regarded as locally flat. The analytical problem can be solved in closed form to represent the acoustic radiation in terms of prescribed turbulent boundary layer pressure fluctuations. Two cases are considered: (i) the production of sound at an isolated panel edge (i.e., in the approximation in which the correlation between sound and vibrations generated at neighboring edges is neglected), and (ii) the sound generated by a periodic arrangement of identical panels. The latter problem is amenable to exact analytical treatment provided the panel edge conditions are the same for all panels. Detailed predictions of the interior noise depend on a knowledge of the turbulent boundary layer wall pressure spectrum, and are given here in terms of an empirical spectrum proposed by Laganelli and Wolfe. It is expected that these analytical representations of the sound generated by simplified models of fluid-structure interactions can used to validate more general numerical schemes.

Howe, M. S.↗

Stakeholder Analysis Report Subtask 3.3 – CarbonSAFE Illinois East Sub-Basin Topical Report 8

Effective stakeholder engagement has been proven to be a critical component in the success of numerous CCS activities and is essential if the technology is to be widely developed in the future. This report contains a stakeholder assessment and highlights some engagement activities conducted during the CarbonSAFE Illinois East Sub-Basin Prefeasibility study. This report is intended to lay the groundwork and provide recommendations for the Wabash CarbonSAFE Feasibility project, currently underway in conjunction with the Wabash Valley Resources ammonia plant retrofit taking place at the former Terre Haute US DOE integrated gasification combined cycle plant. The analysis sets the stage for identifying and understanding the concerns of key stakeholders, describes actions currently underway, highlights perceptions of potential benefits and risks of project activities, and provides recommendations for short- and long-term forms of engagement. This study used social site characterization methods to better understand local and regional stakeholder positions and needs. The stakeholder engagement strategy will emphasize engagement with stakeholders that enable project development and those that are impacted by the project. The stakeholder analysis process can be broken down into the four basic steps of: identifying, analyzing, mapping, and prioritizing. Various stakeholders were identified by literature search, and additionally by a group of approximately twenty Indiana University SPEA master’s students via a stakeholder workshop. The stakeholder analysis and mapping process is used to help prioritize stakeholder engagement strategies; engagement strategies must be developed with particular stakeholder concerns in mind and messages tailored to those stakeholders’ needs. The stakeholder map with engagement strategy developed for this analysis suggests state government, industry, federal government, and state education are predicted to have the highest interest and influence and should be a priority focus in engagement. Local media, local landowners, local government, and utilities are predicted to have high influence but low interest and may also be a high priority group to engage. Environmental and economic impacts of activities that are considered to be important by stakeholders in the present day (key) or activities that have taken place in the past (legacy) can impact stakeholder perspectives and need to be considered when creating a stakeholder engagement strategy. The issue of environmental clean-up was identified in both the social media analysis and also through USEPA Environmental Justice analysis tools. Thus, it is clear this will be an important factor for consideration in any stakeholder engagement conducted in and around Terre Haute. Furthermore, stakeholder engagement education materials will need to emphasize that carbon dioxide is not a hazardous material, as well as address FAQs regarding CCS. In addition, recommendations for consideration when developing the stakeholder engagement strategy for projects in the Illinois East Sub-Basin in general and related to the Wabash CarbonSAFE project specifically include: drawing clear lines of responsibility between Wabash Valley Resources and ISGS-led Wabash CarbonSAFE that allow the projects to manage integration and messaging; the need for ISGS and other partners to maintain objectivity and remain trusted sources of information; monitoring of social media and continuing to engage with key stakeholder groups; and providing support for key stakeholders to become sources of project information and project champions.

01 COAL, LIGNITE, AND PEAT↗

Computational study of inertial migration of prolate particles in a straight rectangular channel

Inertial migration of spherical particles has been investigated extensively using experiments, theory, and computational modeling. Yet, a systematic investigation of the effect of particle shape on inertial migration is still lacking. Herein, we numerically mapped the migration dynamics of a prolate particle in a straight rectangular microchannel using smoothed particle hydrodynamics at moderate Reynolds number flows. After validation, we applied our model to 2:1 and 3:1 shape aspect ratio particles at multiple confinement ratios. Their effects on the final focusing position, rotational behavior, and transitional dynamics were studied. In addition to the commonly reported tumbling motion, for the first time, we identified a new logrolling behavior of a prolate ellipsoidal particle in the confined channel. This new behavior occurs when the confinement ratio is above an approximate threshold value of K = 0.72. Our microfluidic experiments using cell aggregates with similar shape aspect ratio and confinement ratio confirmed this new predicted logrolling motion. In this study, we also found that the same particle can undergo different rotational modes, including kayaking behavior, depending on its initial cross-sectional position and orientation. Furthermore, we examined the migration speed, angular velocity, and rotation period as well as their dependence on both particle shape aspect ratio and confinement ratio. Our findings are especially relevant to the applications where particle shape and alignment are used for sorting and analysis, such as the use of barcoded particles for biochemical assays through optical reading, or the shape-based enrichment of microalgae, bacteria, and chromosomes.

42 ENGINEERING↗

Subtropical Jet Regulates Arabian Winter Precipitation: A Viable Mechanism

The present study explores the mechanism governing wintertime (November–April) precipitation over the Arabian Peninsula (AP) using a 17-yr-long (2002–18) high-resolution WRF simulation. The composite analysis of strong precipitation events suggests that the equatorward extension of the upper-level jet together with the embedded upper-level trough creates a positive (cyclonic) midlevel vorticity and subsequently generates an anomalous lower-level convergence through Ekman pumping. This leads to the development of an anomalous surface low, which is further enhanced in the presence of the existing Red Sea trough over the AP. This surface low weakens the persistent anticyclone over the AP, shifting it further eastward to the Arabian Sea. The eastward shift in the lower-level anticyclone contributes to the transport of warm, moist air from the Arabian Sea and the Red Sea toward the AP. This warm, moist air converges with the cold and dry air advected by the midlatitude jet and creates a moisture convergence zone, leading to the initiation of convection. We test the proposed mechanism through numerical experiments with modified upper-level wind and demonstrate that a strong, southward intrusion of the jet can indeed lead to precipitation over the AP. The above mechanism also explains the interannual variability of precipitation over the AP. During wet years, we notice approximately 3 m s -1 stronger jet core magnitude and about a 2° equatorward shift of the jet compared to dry years. While the equatorward extension of the jet explains about 21% of the interannual variability, the jet magnitude explains around 7% of the variability during wet years.

54 ENVIRONMENTAL SCIENCES↗

Application of the kappa-omega Turbulence Model to Quasi-Three-Dimensional Turbomachinery Flows

Many computational fluid dynamics codes for turbomachinery use the Baldwin-Lomax (B-L) turbulence model. It is easy to implement in two dimensions and works well for predicting overall turbomachinery performance. However, it is awkward to implement in three dimensions, often has difficulty finding the length scale, has a crude transition model, and neglects freestream turbulence, surface roughness, and mass injection. The kappa-omega model developed by Wilcox is an appealing alternative for several reasons. First, it is the only two-equation model that can be integrated to the wall without requiring damping functions or the distance to the wall, and hence, should behave well numerically. Second, the effects of freestream turbulence, surface roughness, and mass injection are easily included in the model. Finally, transition can be simulated using the low Reynolds number version of the model. Menter applied the kappa-model to external flows and showed very good results for flows with adverse pressure gradients. Liu and Zheng described their implementation of the kappa-model in a cascade code that included an area change term to account for endwall convergence. They validated the model for a flat plate, and compared the B-L and kappa-models to measured surface pressures for a low-pressure turbine cascade. Since they did not use the low Reynolds number version of the model, their results showed problems resulting from early transition. In this Note the low Reynolds number kappa-model was incorporated in the author's quasi-three-dimensional turbomachinery analysis code. The code includes the effects of rotation, radius change, and stream-surface thickness variation, and also includes the B-L turbulence model. The kappa-omega model was implemented using many of Menter's recommendations and an implicit approximate-factorization scheme described by Baldwin and Barth. The model was tested for a transonic compressor with rotation and variable stream-surface radius and height, and for a transonic turbine vane with transition and heat transfer. Results were compared to the B-L model and to experimental data.

Chima, Rodrick V.↗

Baseline Computational Fluid Dynamics Methodology for Longitudinal-Mode Liquid-Propellant Rocket Combustion Instability

A computational method for the analysis of longitudinal-mode liquid rocket combustion instability has been developed based on the unsteady, quasi-one-dimensional Euler equations where the combustion process source terms were introduced through the incorporation of a two-zone, linearized representation: (1) A two-parameter collapsed combustion zone at the injector face, and (2) a two-parameter distributed combustion zone based on a Lagrangian treatment of the propellant spray. The unsteady Euler equations in inhomogeneous form retain full hyperbolicity and are integrated implicitly in time using second-order, high-resolution, characteristic-based, flux-differencing spatial discretization with Roe-averaging of the Jacobian matrix. This method was initially validated against an analytical solution for nonreacting, isentropic duct acoustics with specified admittances at the inflow and outflow boundaries. For small amplitude perturbations, numerical predictions for the amplification coefficient and oscillation period were found to compare favorably with predictions from linearized small-disturbance theory as long as the grid exceeded a critical density (100 nodes/wavelength). The numerical methodology was then exercised on a generic combustor configuration using both collapsed and distributed combustion zone models with a short nozzle admittance approximation for the outflow boundary. In these cases, the response parameters were varied to determine stability limits defining resonant coupling onset.

Litchford, R. J.↗

Radiation Transport in Random Media With Large Fluctuations

Strongly heterogeneous media arise in several applications that include radiation shields, nuclear fuel, BWR moderators, clouds, planetary and stellar atmospheres, turbulent gases and plasmas. Neutral and charged particle transport computations in such media have relied heavily on formulating transport equations with spatially random coefficients (physical data) and developing solution methods to deal with the additional stochastic dimensions. Attempts at developing approximate closures that yield only low order statistical information (e.g., mean and variance of the flux) have proved to be highly restrictive under real physics conditions or rely on techniques that require fluctuation amplitudes to be small for robustness. Recently, stochastic spectral methods such as polynomial chaos and stochastic collocation have been developed for aleatoric uncertainty quantification and sensitivity analysis, and successfully applied in radiation transport work. Advances in UQ techniques have tended to focus on efficiently handling large numbers of uncertain variables but the rigorous stochastic basis of the approach also promotes its use in situations where stochasticity is due to spatial heterogeneity and the associated uncertainty is large. Here we apply these techniques to radiation transport in media with spatially randomly varying cross sections without restriction on fluctuation amplitudes. Specifically, we represent the cross sections as a lognormal spatial random process with specified mean, variance and covariance function and use a Karhunen-Loeve (KL) decomposition to generate cross section realizations that are strictly positive. Woodcock Monte Carlo (WMC) is then used to simulate transport using random sampling of cross sections and deterministic sampling based on a stochastic collocation technique. Numerical results for the mean and variance in the scalar flux and leakage currents are obtained for weak and strong random variations. We focus in this work on demonstrating the approach and defer application to specific problems to a future investigation. We have demonstrated that a combination of stochastic spectral representation and Woodcock Monte Carlo simulation allows efficient computation of radiation transport in strongly random media. The use of a lognormal distribution to represent the fluctuations in medium properties facilitates enforcement of strict positivity of cross section realizations, a condition that has challenged standard approaches that assume Gaussian fluctuations. The fact that the lognormal random process is a memoryless nonlinear transformation of a Gaussian process further enables efficient and accurate reconstruction of the random cross section realizations using a Karhunen-Loeve representation of the cross section. Finally, the robustness of this model enables fluctuations of arbitrarily large amplitude to be studied, using both random sampling Monte Carlo and more efficient stochastic collocation techniques. The present work is being extended to allow reconstruction of probability density functions of output variables using polynomial chaos representation, and to accommodate general cross section covariance functions. Also, techniques are being explored to more judiciously select ceiling cross sections to enhance the efficiency of Woodcock Monte Carlo for transport in random media. (authors)

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Electron Flow to a Satellite at High Positive Potential

The Tethered Satellite System (TSS) is designed to deploy a 1.6 m diameter spherical satellite a distance of 20 km above the space shuttle orbiter on an insulated conducting tether. Because of the passage of the conducting tether through the earth's magnetic field, an emf is generated producing a positive satellite potential of about 5000 V. Electron flow under the influence of this high positive potential is the focus of the present analysis. The ionospheric parameters at TSS orbit altitude are; thermal velocity of electrons, 1.9 x 10(exp 5) M/S, thermal velocity of the ions, 1.1 x 10(exp 3) m/s, velocity of the satellite 8 x 10(exp 3) m/s. The electrons, with a Debye length, lambda(D) = 0.49 cm, spiral about the earth's magnetic field lines (0.4 Gauss) with a radius of about 3 cm and the ions spiral with a radius of 5 m. Under these conditions, the electron thermal energy, kT is 0.17 eV. The TSS satellite radius, r(p) is 163 Debye lengths. There is an extensive literature on the interaction of satellites with the near-earth ionospheric plasma. The space charge limitation to the electron current collected by a sphere at positive electrical potential was calculated by Langmuir and Blodgett (1924). Parker and Murphy (1967) recognized the importance of the influence of the earth's magnetic field and used the guiding center approximation to calculate the electron current collected by a positive charged satellite. More recently Ma and Schunk (1989) have calculated the time dependent flow of electrons to a spherical satellite at positive potential utilizing numerical methods and Sheldon (1994) used similar methods to solve this problem for the steady state. In order to analyze some of the phenomena that occurred in the ionosphere during the TSS flights, it would be useful to have analytic expressions for these electron flows. The governing equations are very complex and an exact analytical solution is not likely. An approximate analytical solution is feasible however, and the results of one attempt are presented herein.

Sheldon, John W.↗

Analysis of ISS Plasma Interaction

To date, the International Space Station (ISS) has been one of the largest objects flown in lower earth orbit (LEO). The ISS utilizes high voltage solar arrays (160V) that are negatively grounded leading to pressurized elements that can float negatively with respect to the plasma. Because laboratory measurements indicate a dielectric breakdown potential difference of 80V, arcing could occur on the ISS structure. To overcome the possibility of arcing and clamp the potential of the structure, two Plasma Contactor Units (PCUs) were designed, built, and flown. Also a limited amount of measurements of the floating potential for the present ISS configuration were made by a Floating Potential Probe (FPP), indicating a minimum potential of 24 Volts at the measurement location. A predictive tool, the ISS Plasma Interaction Model (PIM) has been developed accounting for the solar array electron collection, solar array mast wire and effective conductive area on the structure. The model has been used for predictions of the present ISS configuration. The conductive area has been inferred based on available floating potential measurements. Analysis of FPP and PCU data indicated distribution of the conductive area along the Russian segment of the ISS structure. A significant input to PIM is the plasma environment. The International Reference Ionosphere (IRI 2001) was initially used to obtain plasma temperature and density values. However, IRI provides mean parameters, leading to difficulties in interpretation of on-orbit data, especially at eclipse exit where maximum charging can occur. This limits our predicative capability. Satellite and Incoherent Scatter Radar (ISR) data of plasma parameters have also been collected. Approximately 130,000 electron temperature (Te) and density (Ne) pairs for typical ISS eclipse exit conditions have been extracted from the reduced Langmuir probe data flown aboard the NASA DE-2 satellite. Additionally, another 18,000 Te and Ne pairs of ISR data from several radar locations around the globe were used to assure consistency of the satellite data. PIM predictions for ISS charging made with this data correlated very well with FPP data, indicating that the general physics of spacecraft charging with high voltage solar arrays have been captured. The predictions also provided the probabilities of occurrences for ISS charging. These probabilities give a numerical measure of the number of times when the ISS will approach or exceed the vehicle plasma hazard conditions for each configuration. In this paper we shall present the interaction mechanisms between the ISS and the surrounding plasma and give an overview of the PIM components. PIM predictions are compared with available data followed by a discussion of the variability of plasma parameters and the conductive area on the ISS. The ISS PIM will be further tested and verified as data from the Floating Potential Measurement Unit become available, and construction of the ISS continues.

Reddell, Brandon↗

Fast-shock formation in line-tied magnetic reconnection models of solar flares

In a previous study by the author, an approximately stationary fast shock was tentatively identified in a numerical experiment designed to study line-tied magnetic reconnection. Here the evidence for the occurrence of a stationary fast shock is reexamined, and the previous identification is confirmed. In the numerical experiment, line-tied reconnection is modeled by a configuration which produces two supermagnetosonic outflow jets - one directed upward, away from the photosphere, and one directed downward, toward an arcade of closed magnetic loops tied to the photosphere. The fast shock occurs when the downward-directed jet encounters the obstacle formed by the closed loops. Although the existence of a stationary, or nearly stationary, fast shock is confirmed, the transition from the supermagnetosonic flow region upstream of the shock to the nearly static region downstream of the shock is more complicated than was previously thought. Immediately downstream of the shock, there exists a deflection sheath in which the submagnetosonic flow coming out of the shock is diverted around the region of static closed loops. The MHD jump conditions are used to investigate the characteristics of the fast shock and to show that a stationary shock cannot exist unless accompanied by a deflection sheath. Analysis of the shock's location and dimensions suggests that such fast shocks may contribute to particle acceleration and to thermal condensation in flares.

Forbes, T. G.↗

WEC-Sim Modeling of Laminar Scientific's Patented Seesaw Wave Energy Converter: Preprint

Laminar Scientific's patented seesaw wave energy converter was modeled in WEC-Sim to predict performance. The device operates by utilizing ocean surface waves to rotate a truss in pitch about a pivot. The pivot is located at the top of two pylons, which are embedded in the seafloor. The seesaw has a float on either end, and the buoyancy forces from each float cause the system to rise or fall with passing waves. Device performance relies upon seesaw length and ocean wavelength creating an antiphase effect. The seesaw truss has an adjustable length intended to achieve this effect. The operation method enforces a narrow band of wavelengths which induce the largest rotational motion from the device. The hydrodynamic analysis of the device was performed using Capytaine, and the results confirmed that the device operates best in a narrow frequency band. Four float-to-float spacing cases and three pylon radii were examined. The hydrodynamic results indicate a match between the model and the physical expectations for the device, and that varying the pylon radii by 0.1-m increments for three instances creates minimal changes in hydrodynamic properties. Power matrices for three float spacing cases of the device were simulated with Joint North Sea Wave Project spectra waves and optimal power take-off damping in WEC-Sim. The maximum average power production for the 15-m spacing case was 14.1 kW with a 5.0-s peak wave period and 4-m significant wave heights. Plots of capture-width ratios indicated that the device performance was linear and confirmed that the device is optimal in a narrow frequency band. The maximum percentage of the available wave power produced by the 15-m device was approximately 16%. Simulations of the device in regular waves were used to produce plots of average power compared to a ratio of float spacing to wavelength. These plots indicate that the power production is maximized at a ratio of 0.5, and further confirm that the device has a narrow frequency response. The device was simulated at an example field location, where the device produced an annual average power rating of 1.6 kW given an average omnidirectional wave climate of 10.3 kW m-1 and an optimal, linearized power take-off model. While the maximum predicted device performance is reliant upon a narrow band of wave frequencies, the conducted analysis provides an opportunity to improve device design prior to prototyping and testing. Modifying the design to respond to a broader frequency range would improve device performance.

numerical modeling↗

Numerical Simulation of a Natural Convection–Driven Air-Cooled Reactor Cavity Cooling System Experiment

Ensuring the efficient removal of decay heat from the reactor vessel is essential for the safety of advanced reactor technologies. Several Generation-IV concepts incorporate variations in the reactor vessel cooling systems to achieve this objective. High-temperature gas-cooled reactors utilize a reactor cavity cooling system (RCCS), a passive ex-vessel system designed to operate without active components or external power during accident conditions. The RCCS removes decay heat primarily through radiative and convective heat transfer mechanisms. Here, this study presents a comprehensive validation of a computational fluid dynamics Reynolds-averaged Navier-Stokes model for the University of Wisconsin-Madison air-cooled RCCS facility. Validation was conducted for both high- and low-power natural convection cases under a uniform heating profile. Near-wall resolution was found to be critical for accurately modeling natural convection in the RCCS; employing an all-𝑦 + wall treatment resulted in wall temperature discrepancies exceeding 50 °⁢𝐶 compared to a wall-resolved mesh. Thermal-hydraulic behaviors under natural and forced convection conditions were compared within the heated cavity and RCCS. A turbulence model sensitivity analysis indicated that low-Reynolds number k-ɛ, k-ω shear stress transport (SST), and Reynolds stress transport models produce similar wall temperature predictions. A buoyancy modeling sensitivity study revealed that the Boussinesq approximation significantly underpredicted thermal-hydraulic behavior in the RCCS. Based on these findings, modeling recommendations are provided. The validated data set along with identified sensitivities refine the modeling of natural convection in the RCCS. The information produced by this study supports RCCS design, optimization, and safety evaluations, enabling the calibration and verification of reduced-order thermal-hydraulic models.

22 - GENERAL STUDIES OF NUCLEAR REACTORS↗

Quantitative assessment of eddy viscosity rans models for turbulent mixed convection in a differentially heated plane channel

Turbulent mixed convection between two vertical, infinite parallel plates at different temperatures is studied using various two-equation turbulence models. The numerical simulations are performed at a turbulent Reynolds number of Re τ = 150 and a Grashof number of Gr = 9.6 × 10 5 . Comparisons are made against the highly trusted DNS results. Consistent with the DNS approach, the current simulations are performed using constant properties and the Boussinesq approximation to predict the influence of buoyancy. Previous studies have provided assessments of two-equation turbulence models for various scenarios, but often rely on a qualitative “eye” test in order to determine the most appropriate model to predict a given flow. This study aims to provide a new form of quantitative assessment that accounts for both the physics captured by the turbulence model as well as the magnitude of the system response quantities (SRQ) using a modified symmetric mean absolute percent error (SMAPE) method. This method is designed to be approachable to researchers at any level and can be applied to system response quantities from multiple research fields. Uncertainty quantification is also performed to determine the discretization error for each turbulence model. Recommendations are made as to which turbulence models best capture the physics – hydrodynamically and thermally – using both local and global validation metrics. Lastly, a sensitivity analysis is performed on the damping functions used in the most accurate models. This underpins the potential of model developments and adjustments most worth pursuing for buoyant flows. Finally, this framework provides a more physics-based comparative analysis of the selected turbulence models.

42 ENGINEERING↗

Statistical approach to studying radiation from multicharged ions in a plasma under coronal equilibrium conditions

Radiation spectra from a plasma with multicharged ions, z >> N >> 1(where z is the charge of an ion and N is the number of electrons in the ion) under coronal equilibrium conditions are considered in the quasiclassical approximation. In this case, the bremsstrahlung and recombination radiation can be described by simple quasiclassical formulas. The statistical model of an atom is used to study the high-frequency component of the line radiation spectra from ions ({h_bar}{omega} > I, where I is the ionization energy) that is produced in collisions of free plasma electrons with the electrons at deep levels of an ion and during radiative filling of the forming hole by electrons from higher levels (X-ray terms, characteristic radiation). The intensity of this high-frequency spectral component of the characteristic radiation coincides in order of magnitude with the bremsstrahlung and recombination radiation intensities. One of the channels of collisions of free electrons with a multicharged ion is considered that results in the excitation of the ion and in its subsequent radiative relaxation, which contributes to the low-frequency component of the line spectrum ({h_bar}{omega} < I). The total radiation intensity of this channel correlates fairly well with the results of calculating the radiation intensity from the multilevel coronal model. An analysis of the plasma behavior in the MAGO-IX experiment by two-dimensional MHD numerical simulations and a description of the experimental data from a DANTE spectrometer by the spectra obtained in this study shows that these experimental results cannot be explained if the D-T plasma is assumed to remain pure in the course of experiment. The agreement can be made better, how-ever, by assuming that the plasma is contaminated with impurities of copper and light elements from the wall.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Design and Performance Calculations of a Propeller for Very High Altitude Flight

Reported here is a design study of a propeller for a vehicle capable of subsonic flight in Earth's stratosphere. All propellers presented were required to absorb 63.4 kW (85 hp) at 25.9 km (85,000 ft) while aircraft cruise velocity was maintained at Mach 0.40. To produce the final design, classic momentum and blade-element theories were combined with two and three-dimensional results from the Advanced Ducted Propfan Analysis Code (ADPAC), a numerical Navier-Stokes analysis code. The Eppler 387 airfoil was used for each of the constant section propeller designs compared. Experimental data from the Langley Low-Turbulence Pressure Tunnel was used in the strip theory design and analysis programs written. The experimental data was also used to validate ADPAC at a Reynolds numbers of 60,000 and a Mach number of 0.20. Experimental and calculated surface pressure coefficients are compared for a range of angles of attack. Since low Reynolds number transonic experimental data was unavailable, ADPAC was used to generate two-dimensional section performance predictions for Reynolds numbers of 60,000 and 100,000 and Mach numbers ranging from 0.45 to 0.75. Surface pressure coefficients are presented for selected angles of attack. in addition to the variation of lift and drag coefficients at each flow condition. A three-dimensional model of the final design was made which ADPAC used to calculated propeller performance. ADPAC performance predictions were compared with strip-theory calculations at design point. Propeller efficiency predicted by ADPAC was within 1.5% of that calculated by strip theory methods, although ADPAC predictions of thrust, power, and torque coefficients were approximately 5% lower than the strip theory results. Simplifying assumptions made in the strip theory account for the differences seen.

Koch, L. Danielle↗

Reproducibility in G 0 W 0 calculations for solids

Ab initio many-body perturbation theory within the GW approximation is a Green's function formalism widely used in the calculation of quasiparticle excitation energies of solids. In what has become an increasingly standard approach, Kohn–Sham eigenenergies, generated from a DFT calculation with a strategically-chosen exchange–correlation functional “starting point”, are used to construct G and W, and then perturbatively corrected by the resultant GW self-energy. In practice, there are several ways to construct the GW self-energy, and these can lead to variations in predicted quasiparticle energies. For example, for ZnO and TiO 2 , the GW fundamental gaps reported in the literature can vary by more than 1 eV depending on the GW code used. In this work, we calculate and analyze GW quasiparticle (QP) energies of these and other systems with three different GW codes: BERKELEYGW, ABINIT and YAMBO. Through a systematic analysis of the GW implementation of these three codes, we identify the primary origin of major discrepancies between codes reported in prior literature to be the different implementations the Coulomb divergence in the Fock exchange term and the frequency integration scheme of the GW self-energy. We then eliminate these discrepancies by using common numerical methods and algorithms, demonstrating that the same quasiparticle energies for a given material can be obtained with different codes, within numerical differences ascribable to the technical details of the underling implementations. This work will be important for users and developers in assessing the precision of future GW applications and methods.

36 MATERIALS SCIENCE↗

Observations of comet ISON (C/2012 S1) from Lowell observatory

We observed the dynamically new sungrazing comet ISON (C/2012 S1) extensively at Lowell Observatory throughout 2013 in order to characterize its behavior prior to perihelion. ISON had “typical” abundances for an Oort Cloud comet. Its dust production, as measured by Afρ, remained nearly constant during the apparition but its CN gas production increased by ∼50 ×. The minimum active area necessary to support observed water production rates exceeded the likely surface area of the nucleus and suggests a population of icy grains in the coma. Together with the flattening of the dust radial profile over time, this is consistant with ejection of a large quantity of slow moving dust and icy grains in the coma at large heliocentric distance. The dust morphology was dominated by the tail, but a faint sunward dust fan was detected in March, April, May, and September. We imaged multiple gas species in September, October, and November. All gas species were more extended than the dust coma, although only CN had sufficient signal-to-noise for detailed morphological study. Excess CN signal was observed in the sunward hemisphere in September and early October. In November the excess CN signal was in the tailward hemisphere and two faint CN features appeared approximately orthogonal to the tail with position angles varying by about ±20° from night to night. Using numerical modeling, we best reproduced the orientation and shape of these features as well as the bulk brightness with a pole oriented approximately toward the Sun and a single source located within ∼35° of the equator. Variations in position angle and relative brightness of the CN features from night to night suggest a rotation period shorter than 24 hr. The production rates and coma morphology suggest a nucleus that was active over nearly its entire sunward facing hemisphere in September and October but which underwent a significant mass loss event, potentially including fragmentation, shortly before November 1. Significant subsequent mass loss likely continued at the same site over subsequent days/weeks and may have catastrophically weakened the nucleus prior to perihelion.

79 ASTRONOMY AND ASTROPHYSICS↗