Search NASA⌕ Search

SEARCH · Search NASA

Results for “Operating experience data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,783 records · Page 99

SciDAC – PSI: Plasma Surface Interactions involving Tungsten - A Summary of Project Accomplishments

Gaining physics understanding and predictive capabilities to describe the evolution of plasma facing components (PFC) requires simultaneously addressing complex and diverse physics occurring over a wide range of length and time scales, as well as integrating extensive physical processes across the plasma - surface - bulk materials boundaries. This requires development not only of detailed physics models and computational strategies at each of these scales, but computer science algorithms and methods to strongly couple them in a way that can be robustly validated through comparisons against available data and new experiments. Therefore, the objective of this project is to develop robust, high-fidelity simulation tools capable of predicting the PFC operating lifetime and the PFC impact on plasma contamination, recycling of hydrogenic species, and tritium retention in future magnetic fusion devices, with a focus on tungsten based material systems. Deploying these tools requires the development of a leadershipscale computational code, as well as a host of simulations that span the multiple scales needed to address complex physical and computational issues at the plasma - surface interface and the transition below the surface where neutron damage processes in the bulk material dominate behavior in multiple-component materials systems. Successful development will enable improved prediction of PFC performance needed to ensure magnetic fusion energy development beyond ITER.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Gasoline Engine and Fuels Offering Reduced fuel Consumption and Emissions (GEFORCE)

The GEFORCE project resulted from a collaborative proposal submitted to a U.S. DOE funding opportunity announcement. The CRADA reported herein was put in place to support the GEFORCE project. The project objective was to establish key engine technologies and fuel characteristics that enable very high fuel efficiency with very low emissions in future vehicles. A matrix of study fuels was designed and produced to support engine experiments in an advanced engine. The advanced engine was constructed and prepared for operation in an engine test cell at a 3rd party laboratory. ORNL conducted engine experiments using a 2.0 LTG engine and used the resulting data to estimatefuel economy values for a mid-size sedan using a vehicle model established in Autonomie. The projected fuel economy trends versus driving schedule were consistent with those identified in a previous projectconducted in partnership with the Coordinating Research Council (CRC), AVFL-20. Additional vehicle modeling is anticipated when data are available from the advanced engine.

33 ADVANCED PROPULSION SYSTEMS↗

LHCspin: a Polarized Gas Target for LHC

The goal of the LHCspin project is to develop innovative solutions for measuring the 3D structure of nucleons in high-energy polarized fixed-target collisions at LHC, exploring new processes and exploiting new probes in a unique, previously unexplored, kinematic regime. A precise multi-dimensional description of the hadron structure has, in fact, the potential to deepen our understanding of the strong interactions and to provide a much more precise framework for measuring both Standard Model and Beyond Standard Model observables. This ambitious task poses its basis on the recent experience with the successful installation and operation of the SMOG2 unpolarized gas target in front of the LHCb spectrometer. Besides allowing for interesting physics studies ranging from astrophysics to heavy-ion physics, SMOG2 provides an ideal benchmark for studying beam-target dynamics at the LHC and demonstrates the feasibility of simultaneous operation with beam-beam collisions. With the installation of the proposed polarized target system, LHCb will become the first experiment to simultaneously collect data from unpolarized beam-beam collisions at $\sqrt{s}$=14 TeV and polarized and unpolarized beam-target collisions at $\sqrt{s_{NN}}\sim$100 GeV. LHCspin has the potential to open new frontiers in physics by exploiting the capabilities of the world's most powerful collider and one of the most advanced spectrometers. This document also highlights the need to perform an R&D campaign and the commissioning of the apparatus at the LHC Interaction Region 4 during the Run 4, before its final installation in LHCb. This opportunity could also allow to undertake preliminary physics measurements with unprecedented conditions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Skylab Experiment M516 - Crew Activities/Maintenance Study

Skylab required daily movement about the interior of a 340 cu m vehicle and the handling and transfer of numerous loose items. Planned and unplanned maintenance tasks were also included in the daily routine of activity. Experiment M516, Crew Activities/Maintenance Study, involved an investigation of crew activity during routine daily operations. The overall objective was to secure in-flight data relevant to the performance of tasks in the weightless environment. This paper will present an evaluation of man's ability to handle and transport items of various sizes and masses (logistics management) and to make equipment repairs (maintenance). Results and conclusions are based on subjective crew comments, motion-picture film, and television transmissions.

Bond, R. L.↗

Retransmission of hydrometric data in Canada

The author has identified the following significant results. The project continues to demonstrate the feasibility of transmitting hydrometric data to polar orbiting spacecraft and using these data on a quasi-operational basis. The implementation of the receive site in Alaska in December 1975 has significant impact on the Canadian experiment as the number of transmissions received from some northern and northwestern sites has increased substantially.

Halliday, R. A.↗

STS flight experiments data base

In response to a request of the Space Station Task Force, a data base has been developed, utilizing experiment definitions from all NASA Centers, with emphasis on candidate STS flight experiments that relate to the development and operation of initial and growth versions of a Space Station. Experiments are also included for Shuttle enhancement, for servicing and operations of advanced vehicles such as OMV and OTV, for generic technology such as large structures, control and pointing, heat rejection, for life sciences and for physical sciences and applications. Criteria for selection activity are defined.

Brantley, L. W., Jr.↗

Observations of the plasma environment during an active ionospheric ion beam

This paper presents detailed data on positive ion flux observations acquired during an active rocket-borne ion beam injection experiment, using the hemispheric electrostatic energy and pitch angle spectrometer (HEEPS) which was separated from the beam-emitting payload by distances along and across geomagnetic field lines which varied systematically during the experiment. The data obtained by the HEEPS illustrate a number of outstanding features of the ion flux environment near the HEEPS instrument during beam operations, some of which are not understood. It is shown that particle, field, and photometric data support a picture of particularly intense beam-plasma interactions in the immediate vicinity of the beam-emitting payload.

Pollock, C. J.↗

U.S. Laboratory Module - Its capabilities and accommodations to support user payloads

The U.S. Laboratory Module of the Space Station is discussed, focusing on user accommodations. The configuration and subsystems capabilities of the module are described, including the power, thermal, environmental control, and data management subsystems, the vacuum system, process materials management, and laboratory support equipment. The experimental facilities included in the laboratory are listed. The experiment operations planned for the laboratory are examined and compared with the experimental activities in other manned space laboratories.

Powell, Luther E.↗

Data compression for near Earth and deep space to Earth transmission

Key issues of data compression for near Earth and deep space to Earth transmission discussion group are briefly presented. Specific recommendations as made by the group are as follows: (1) since data compression is a cost effective way to improve communications and storage capacity, NASA should use lossless data compression wherever possible; (2) NASA should conduct experiments and studies on the value and effectiveness of lossy data compression; (3) NASA should develop and select approaches to high ratio compression of operational data such as voice and video; (4) NASA should develop data compression integrated circuits for a few key approaches identified in the preceding recommendation; (5) NASA should examine new data compression approaches such as combining source and channel encoding, where high payoff gaps are identified in currently available schemes; and (6) users and developers of data compression technologies should be in closer communication within NASA and with academia, industry, and other government agencies.

Erickson, Daniel E.↗

Overview of the Microgravity Science Glovebox (MSG)

MSG is a third generation glovebox for Microgravity Science investigations: SpaceLab Glovebox (GBX); Middeck/MIR Gloveboxes (M/MGBX); and GBX and M/MGBX developed by Bradford Engineering (NL). Previous flights have demonstrated utility of glovebox facilities: Contained environment enables broader range of science experiments; Affords better control of video and photographic imaging (a prime data source); Provides better environmental control than cabin atmosphere; and Useful for contingency operations. MSG developed in response to demands for increased work volume, increased capabilities and additional resources. MSG is multi-user facility to support a wide range of small science and technology investigations: Fluid physics; Combustion science; Material science; Biotechnology (cell culturing and protein crystal growth); Space processing; Fundamental physics; and Technology demonstrations. Topics included in this viewgraph are: MSG capabilities; MSG hardware items; MSG, GSE, and OSE items; MSG development approach; and Science utilization.

Wright, Mary Etta↗

HyShot-T4 Supersonic Combustion Experiments

A series of experiments were initiated to investigate the operation of a two-dimensional, hypersonic, airbreathing engine (scramjet) inclined at angles of attack to the freestream. The experiments were undertaken to obtain data for use in the Hyshot flight test program. Experiments on the Hyshot scramjet were under taken in the T4 shock tunnel. Experiments were made at a nominal total enthalpy of 3.0MJkg (exp -1) using a nozzle that produced flows with a Mach number of approximately 6.5. The conditions produced correspond to flight at Mach 7.6 at an altitude range of 35.7-21.4km. A summary of the flow conditions is included. The scramjet was tested at 0, plus 2, plus 4, minus 2 and minus 4 degrees angle of attack. Experiments were also undertaken at 2 and 4 degrees angle of skew.

Paull, A.↗

Discovery Planetary Mission Operations Concepts

The NASA Discovery Program of small planetary missions will provide opportunities to continue scientific exploration of the solar system in today's cost-constrained environment. Using a multidisciplinary team, JPL has developed plans to provide mission operations within the financial parameters established by the Discovery Program. This paper describes experiences and methods that show promise of allowing the Discovery Missions to operate within the program cost constraints while maintaining low mission risk, high data quality, and reponsive operations.

low cost planetary exploration Discovery mission o↗

UH-60A Airloads Flight Test Program: Data Counter 9505

The data collection portion of the UH-60A Airloads Flight Test Program (ref. 1) was conducted between July 1993 and February 1994. At the time, the UH-60A Airloads Program was the most comprehensive and data-rich rotorcraft flight test program that NASA and the U.S. Army had ever attempted. It was part of the Modern Technology Rotors Program (ref. 2), where several different rotors were tested in small- and full-scale wind tunnels combined with flight testing. The UH-60A portion of this program allowed for comparison between other tests performed and served as a scientific quality database for validating current and new computational and simulation models. The UH-60A flight test data was stored in a comprehensive, easily accessed database known as the Tilt Rotor Engineering Database System, or TRENDS (ref. 3). With over 30 years of rotor testing experience (ref. 4), NASA and the Army’s goal of the Airloads Flight Test Program was to collect data for a wide range of operating conditions, and to provide an extensive amount of data to improve the understanding of rotors and validate and improve prediction codes. This report presents the entire archived data set from Counter 9505 (Run 95, point 5) from the UH-60A Airloads Flight Test Program. There were 1,078 total data set counters acquired and archived during 57 accumulated flight hours and 31 research flights. Over 900 counters were research flight data acquisition data points. Counter 9505 is a low altitude, moderate airspeed, level-flight test condition. Ground acoustic microphone data was acquired for this counter but the acoustic data is not included in this report.

Kufeld, Robert M.↗

Achieving Vibration Stability of the NSLS-II Hard X-ray Nanoprobe Beamline

The Hard X-ray Nanoprobe (HXN) Beamline of National Synchrotron Light Source II (NSLS-lI) requires high levels of stability in order to achieve the desired instrument resolution. To ensure that the design of the endstation helps meet the stringent criteria and that natural and cultural vibration is mitigated both passively and actively, a comprehensive study complimentary to the design process has been undertaken. Vibration sources that have the potential to disrupt sensitive experiments such as wind, traffic and NSLS II operating systems have been studied using state of the art simulations and an array of field data. Further, final stage vibration isolation principles have been explored in order to be utilized in supporting endstation instruments. This paper presents results of the various study aspects and their influence on the HXN design optimization.

36 MATERIALS SCIENCE↗

Gas retention and release from Hanford Site sludge waste tanks - 15491

Radioactive wastes from nuclear fuel processing are stored in large underground storage tanks at the Hanford Site. Solid wastes can be divided into salt-cake (mostly precipitated soluble sodium nitrate and nitrite salts with some interstitial liquid consisting of concentrated salt solutions) and sludge (mostly low solubility aluminum and iron compounds with relatively dilute interstitial liquid). Waste generates hydrogen through the radiolysis of water and organic compounds, radio-thermolytic decomposition of organic compounds, and corrosion of a tank's carbon steel walls. Nonflammable gases, such as nitrous oxide and nitrogen, are also produced. Additional flammable gases (e.g., ammonia and methane) are generated by chemical reactions between various degradation products of organic chemicals present in the tanks. Six double-shell tanks (DSTs) containing salt-cake wastes began showing signs of gas accumulation and buoyant instability in the form of periodic waste level drops in the 1980's. Studies in the 1990's indicated that gas would accumulate in the settled solids layer until its bulk density was lower than the supernatant liquid. The resultant gas release caused by this instability was termed a Buoyant Displacement Gas Release Event (BDGRE). Criteria were developed to prevent forming additional waste tanks that exhibited BDGREs. Significant gas accumulation and BDGREs were never observed in tanks containing predominantly sludge wastes. Literature reviews, data from Hanford Site waste tanks, and experiments with waste simulants have led to new conclusions on gas retention and release in sludge waste. The data show similar overall behavior where initially the settled solids volume increases as gas bubbles form. Gas fraction in the settled solids increases to a peak concentration after which additional generated gas escapes through connected cracks and there is a balance between gas generation and gas release with little change in gas fraction. Experiments showed that this behavior does not change as sludge waste depth increases. Sufficient data now exist to differentiate between gas retention and release behavior in Hanford Site sludge waste tanks and salt-cake waste tanks. The salt-cake criteria do not need to be applied to sludge waste tanks that exhibit certain gas retention and release behavior. Criteria for waste characteristics and process behavior have been defined that identify specific wastes and tanks that, based on previous operating experience, will have low gas retention and will not exhibit large, spontaneous releases. The first criterion defines what waste is considered sludge and what waste is considered salt-cake. If the mass ratio of soluble to insoluble constituents is below 2.5, then the waste is sludge. The second criterion is a density difference criterion that prevents tanks being operated in a region where sludge buoyancy might occur. For large gas releases to occur, the settled solids must accumulate sufficient gas to become less dense than the overlying supernatant (i.e., the settled solids would become buoyant). Based on previous operating experience, the ratio of liquid density to degassed settled solids bulk density (ρl/ρB) should be maintained at ≤ 0.84. This ensures that retained gas content in the sludge would need to exceed 16% by volume for the settled solids to become buoyant in the overlying supernatant. Tank waste that satisfies the mass ratio criterion, the liquid to bulk solids density criterion, and has process data supporting typical Hanford waste sludge behavior does not pose a significant risk for a large spontaneous gas release event. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Coupling of CTF and TRANSFORM using the Functional Mockup Interface

An in-memory coupling between the sub-channel thermal hydraulics code COBRA-TF (CTF), which is included in the Virtual Environment for Reactor Applications (VERA), and the systems code Transient Simulation Framework of Reconfigurable Models (TRANSFORM) was developed in this work. Data exchange is accomplished by using the Functional Mock-Up Interface (FMI), an open standard for coupling dynamic systems models together. The FMI-based coupling necessitated the development of a novel FORTRAN wrapper for communicating with Functional Mock-Up Units. This wrapper will facilitate future FMI-based code couplings with other FORTRAN-based programs. CTF-TRANSFORM is exercised on a simplified Molten Salt Reactor Experiment (MSRE) model in steady-state and transient configurations. The coupled CTF-TRANSFORM model is shown to predict core temperature deltas similar to those available in historical MSRE operational data and is shown to be robust to fast power transients.The coupling paves the way to performing sensitivity and design studies impossible with VERA/CTF alone, in which secondary and tertiary loop operating conditions and design parameters may be perturbed and their impact on the core operating conditions studied.

97 MATHEMATICS AND COMPUTING↗

Initial operation of the NSTX-Upgrade real-time velocity diagnostic

A real-time velocity (RTV) diagnostic based on active charge-exchange recombination spectroscopy is now operational on the National Spherical Torus Experiment-Upgrade (NSTX-U) spherical torus (Menard et al 2012 Nucl. Fusion 52 083015). We designed the system in order to supply plasma velocity data in real time to the NSTX-U plasma control system, as required for the implementation of toroidal rotation control. Our measurements are available from four radii at a maximum sampling frequency of 5 kHz. Post-discharge analysis of RTV data provides additional information on ion temperature, toroidal velocity and density of carbon impurities. Furthermore, examples of physics studies enabled by RTV measurements from initial operations of NSTX-U are discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Determination of hydrogen cluster velocities and comparison with numerical calculations

The use of powerful hydrogen cluster jet targets in storage ring experiments led to the need of precise data on the mean cluster velocity as function of the stagnation temperature and pressure for the determination of the volume density of the target beams. For this purpose a large data set of hydrogen cluster velocity distributions and mean velocities was measured at a high density hydrogen cluster jet target using a trumpet shaped nozzle. The measurements have been performed at pressures above and below the critical pressure and for a broad range of temperatures relevant for target operation, e.g., at storage ring experiments. The used experimental method is described which allows for the velocity measurement of single clusters using a time-of-flight technique. Since this method is rather time-consuming and these measurements are typically interfering negatively with storage ring experiments, a method for a precise calculation of these mean velocities was needed. For this, the determined mean cluster velocities are compared with model calculations based on an isentropic one-dimensional van der Waals gas. Based on the obtained data and the presented numerical calculations, a new method has been developed which allows to predict the mean cluster velocities with an accuracy of about 5%. For this two cut-off parameters defining positions inside the nozzle are introduced, which can be determined for a given nozzle by only two velocity measurements.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗