Search NASA⌕ Search

SEARCH · Search NASA

Results for “PRESSURE DEPENDENCE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,783 records · Page 99

Pressure-induced isostructural transition in PdN2

We show that a synthesized Pd-N compound crystallize into the pyrite structure by comparison of experimental and calculated Raman intensities. The decreasing Raman intensities with decreasing pressure is explained by a closing of the fundamental band gap. We further discuss the experimental decomposition of this compound at 11 GPa in terms of an isostructural transition within the pyrite structure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetic reconnection with pressure tensor in electron magnetohydrodynamics

The dissipation mechanisms of reconnection and the pressure gradient effects on tearing mode with guide magnetic field are analyzed systematically by including the electron pressure tensor in electron magnetohydrodynamics. It is found that which dissipation mechanism dominates, either pressure-based dissipation or inertia-based dissipation, has a great relation with the relative scaling orders between the electron thermal Larmor radius and electron inertia skin depth. The effects of pressure gradient also depend on the relative magnitude between parallel and perpendicular equilibrium pressure gradients. When the pressure-based dissipation is dominant, the condition that pressure drives or suppresses tearing mode instability also depends on the relative magnitude between parallel and perpendicular equilibrium pressure gradients.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Determination of the Rate Constants for the NH 2 (X 2 B 1 ) + NH 2 (X 2 B 1 ) and NH 2 (X 2 B 1 ) + H Recombination Reactions in N 2 as a Function of Temperature and Pressure

The recombination rate constants for the reactions NH2 + NH2 → N2H4 (reaction k1b) and NH2 + H → NH3 (reaction k2b) with N2 as a third-body have been measured as a function of temperature and pressure. The temperature range was from 292 to 533 K and the pressure range from a few Torr up to 300–400 Torr, well within the pressure falloff region. The NH2 radical was produced by 193 nm pulsed-laser photolysis of NH3 in a temperature controlled flow chamber. High-resolution time-resolved laser absorption spectroscopy was used to follow the temporal concentration profiles of both NH2 and NH3, simultaneously. The NH2 radical was monitored at 14800.65 cm–1 using the 1231 (0,7,0)Ã2A1 ← 1331 (0,0,0)$\tilde{X}$2B1 ro-vibronic transition, and NH3 monitored at 3336.39 cm–1 on the qQ3(3)s (1,0,0,0) ← (0,0,0,0) ro-vibrational transition. The necessary collisional broadening parameters for each molecule were measured in separate experiments. The pressure and temperature dependence of k1b can be represented by the Troe parameters: k0, the low-pressure three-body recombination rate constant, k0(T) = (1.14 ± 0.59) × 10–19T–(3.41±0.28) cm6 molecule–2 s–1, and Fcent, the pressure broadening parameter, Fcent = 0.15 ± 0.12, independent of temperature. The data could not be fit by three-independent parameters, and the high-pressure limiting rate constant k∞(T) = 9.33 × 10–10T–0.414 e33/T cm3 molecule–1 s–1 was taken from the high-quality theoretical calculations of Klippenstein et al. (J. Phys. Chem A 2009, 113, 10241). The pressure and temperature dependence of k2b, can be represented by the Troe parameters: k0(T) = (9.95 ± 0.58) × 10–26T(-1.76±0.092) cm6 molecule–2 s–1, Fcent = 0.5 ± 0.2, k∞ = 2.6 × 10–10 cm3 molecule–1 s–1. Again, the data could not be fit with three independent parameters, and k2b∞ was chosen to be 2.6 × 10–10 cm3 molecule–1 s–1 and fixed in the analysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The direct measurement of ablation pressure driven by 351-nm laser radiation

The instantaneous scaling of ablation pressure to laser intensity is directly inferred for ramp compression of diamond targets irradiated by 351-nm light. Continuously increasing pressure profiles from 100 to 970 GPa are produced by direct-drive laser ablation at intensities up to 7 × 1013 W/cm2. The free-surface velocity on the rear of the target is used to directly infer the instantaneous ablation-pressure profile at the front of the target. The laser intensity on target is determined by laser power measurements and fully characterized laser spots. The ablation pressure is found to depend on the laser intensity as P(GPa)=42(±3)[I(TW/cm2)]0.71(±0.01).

Fratanduono, D. E.↗

Structure of screw dislocation core in Ta at high pressure

The core structure and Peierls stress of the 1/2 〈111〉(110) screw dislocation in Ta have been investigated theoretically using the modified Peierls–Nabarro theory that takes into account the discreteness effect of crystal. The lattice constants, the elastic properties, and the generalized-stacking-fault energy(γ-surface) under the different pressures have been calculated from the electron density functional theory. The core structure of dislocation is determined by the modified Peierls equation, and the Peierls stress is evaluated from the dislocation energy that varies periodically as dislocation moves. The results show the core width and Peierls stress in Ta are weakly dependent of the pressure up to 100 GPa when the length and stress are measured separately by the Burgers vector b and shear modulus μ. This indicates that core structure is approximately scaling invariant for the screw dislocation in Ta. The scaled plasticity of Ta changes little in high pressure environment.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Analysis of hydrogen plasma in a microwave plasma chemical vapor deposition reactor

The aim of this work is to build a numerical model of hydrogen plasma inside a microwave plasma chemical vapor deposition system. This model will help in understanding and optimizing the conditions for the growth of carbon nanostructures. A 2D axisymmetric model of the system is implemented using the finite element high frequency Maxwell solver and the heat transfer solver in COMSOL Multiphysics. The system is modeled to study variation in parameters with reactor geometry, microwave power, and gas pressure. The results are compared with experimental measurements from the Q-branch of the H{sub 2} Fulcher band of hydrogen using an optical emission spectroscopy technique. The parameter γ in Füner's model is calibrated to match experimental observations at a power of 500 W and 30 Torr. Good agreement is found between the modeling and experimental results for a wide range of powers and pressures. The gas temperature exhibits a weak dependence on power and a strong dependence on gas pressure. The inclusion of a vertical dielectric pillar that concentrates the plasma increases the maximum electron temperature by 70%, the maximum gas temperature by 50%, and the maximum electron number density by 70% when compared to conditions without the pillar at 500 W and 30 Torr. Experimental observations also indicate intensified plasma with the inclusion of a pillar.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A master equation simulation for the • OH + CH 3 OH reaction

A combined (fixed-J) two-dimensional master-equation / semi-classical transition state theory / variational Rice-Ramsperger-Kassel-Marcus (2DME/SCTST/vRRKM) approach has been used to compute reaction rate coefficients of •OH with CH 3 OH over a wide range of temperatures (10 - 2500 K) and pressures (10 -1 -10 4 Torr) based on a potential energy surface that has been constructed using a modification of the HEAT thermochemical protocol. The calculated results show that the title reaction is nearly pressure-independent when T > 250 K, but depends strongly on pressure at lower temperatures. Also, the preferred mechanism and rate constants are found to be very sensitive to temperature. The reaction pathway CH 3 OH + • OH → CH 3 O • + H 2 O proceeds exclusively through tunneling at exceedingly low temperatures (T ≤50 K) typical of those established in interstellar environments. In this regime, the rate constant is found to increase with decreasing temperature, which agrees with low-temperature experimental results. The thermodynamically favored reaction pathway CH 3 OH + • OH → • CH 2 OH + H 2 O becomes dominant at higher temperatures (T ≥ 200 K), such as those found in Earth’s atmosphere as well as combustion environments. By modifying the ab initio barrier heights slightly, experimental rate constants from 200 to 1250 K can be satisfactorily reproduced.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

THE ROLE OF COSMIC-RAY PRESSURE IN ACCELERATING GALACTIC OUTFLOWS

We study the formation of galactic outflows from supernova (SN) explosions with the moving-mesh code AREPO in a stratified column of gas with a surface density similar to the Milky Way disk at the solar circle. We compare different simulation models for SN placement and energy feedback, including cosmic rays (CRs), and find that models that place SNe in dense gas and account for CR diffusion are able to drive outflows with similar mass loading as obtained from a random placement of SNe with no CRs. Despite this similarity, CR-driven outflows differ in several other key properties including their overall clumpiness and velocity. Moreover, the forces driving these outflows originate in different sources of pressure, with the CR diffusion model relying on non-thermal pressure gradients to create an outflow driven by internal pressure and the random-placement model depending on kinetic pressure gradients to propel a ballistic outflow. CRs therefore appear to be non-negligible physics in the formation of outflows from the interstellar medium.

79 ASTRONOMY AND ASTROPHYSICS↗

Development of low cost, high reliability sealing techniques for hybrid microcircuit packages. Phase 2, supplement 1: Moisture permeation of adhesive-sealed hybrid microcircuit packages

The susceptibility of adhesive-sealed ceramic packages to moisture permeation was investigated. The two adhesives, Ablebond 789-1 and Epo-Tek H77, were evaluated as package sealants. These adhesives were previously selected as the most promising candidates for this application from a group of ten adhesives. Ceramic packages sealed with these adhesives were exposed to temperature-humidity conditions of 25 C/98 percent RH, 50 C/60 percent RH, 50 C/98 percent RH, and 85 C/85 percent RH and their moisture contents using were monitored solid state moisture sensors sealed inside them. Five packages were tested at each of these exposures - two ceramic packages sealed with each of the two adhesives and one seam-sealed gold-plated Kovar package. This latter package was included to serve as a control. The results showed that the adhesive-sealed packages were not hermetic to moisture. The rates at which moisture entered the packages increased with the severity of the exposure environments (i.e., higher temperatures and higher moisture vapor pressures) with greater dependence on temperature than on moisture vapor pressure.

Perkins, K. L.↗

Anharmonic behavior and structural phase transition in Yb{sub 2}O{sub 3}

The investigation of structural phase transition and anharmonic behavior of Yb{sub 2}O{sub 3} has been carried out by high-pressure and temperature dependent Raman scattering studies respectively. In situ Raman studies under high pressure were carried out in a diamond anvil cell at room temperature which indicate a structural transition from cubic to hexagonal phase at and above 20.6 GPa. In the decompression cycle, Yb{sub 2}O{sub 3} retained its high pressure phase. We have observed a Stark line in the Raman spectra at 337.5 cm{sup −1} which arises from the electronic transition between {sup 2}F{sub 5/2} and {sup 2}F{sub 7/2} multiplates of Yb{sup 3+} (4f{sup 13}) levels. These were followed by temperature dependent Raman studies in the range of 80–440 K, which show an unusual mode hardening with increasing temperature. The hardening of the most dominant mode (T{sub g} + A{sub g}) was analyzed in light of the theory of anharmonic phonon-phonon interaction and thermal expansion of the lattice. Using the mode Grüneisen parameter obtained from high pressure Raman measurements; we have calculated total anharmonicity of the T{sub g} + A{sub g} mode from the temperature dependent Raman data.

36 MATERIALS SCIENCE↗

Pressure-induced charge density wave phase in A g 2 - δ Te

Considerable excitement was generated by the observation of large and linear positive magnetoresistance in nonmagnetic silver chalcogenides. Renewed interest in these materials was kindled by the discovery that Ag 2 Te in particular is a topological insulator with gapless linear Dirac-type surface states. High-pressure x-ray-diffraction studies, combined with first-principles electronic structure calculations, have identified three phase transitions as the pressure is increased: an isostructural transition identified with an electronic topological transition followed by two structural phase transitions. These recent studies were carried out on nominally stoichiometric Ag 2 Te. For the present work we have prepared single-phase self-doped Ag 2-δ Te samples with a well-characterized silver deficit (δ=2.0×10 -4 ) for structural and electrical transport measurements over extended ranges of pressure (0–43 GPa), temperature (2–300 K), and magnetic field (0–9 T). The temperature dependence of the resistivity exhibits anomalous behavior at 2.3 GPa, slightly above the isostructural transition, which we postulate is due to Fermi surface reconstruction associated with a charge density wave (CDW) phase. The anomaly is enhanced by the application of a 9-T magnetic field and shifted to higher temperature, implying that the electronic Zeeman energy is sufficient to alter the gapping of the Fermi surface. A peak in the pressure dependence of the resistivity and a sudden drop in the pressure dependence of the mobility, occurring at 2.3 GPa, provide additional evidence for a CDW phase at pressures slightly above the isostructural transition.

36 MATERIALS SCIENCE↗

Tuning the Limiting Thickness of a Thin Oxide Layer on Al (111) with Oxygen Gas Pressure

We report an x-ray photoelectron spectroscopy study of the oxidation of Al(111) surfaces at room temperature, which reveals that the limiting thickness of an aluminum oxide film can be tuned by using oxygen pressure. This behavior is attributed to a strong dependence of the kinetic potential on the oxygen gas pressure. The coverage of oxygen anions on the surface of the oxide film depends on the gas pressure leading to a pressure dependence of the kinetic potential. Our results indicate that a significantly large oxygen pressure (>1 Torr) is required to develop the saturated surface coverage of oxygen ions, which results in the maximum kinetic potential and therefore the saturated limiting thickness of the oxide film.

36 MATERIALS SCIENCE↗

Kinetics and extinction of non-premixed cool and warm flames of dimethyl ether at elevated pressure

Here, the growing demand of clean and efficient propulsion and energy systems has sparked an interest in understanding low-temperature combustion at high pressure. Cool flame transition and extinction limits as well as oxygen concentration dependence at elevated pressures provide insights of the low-temperature and high-pressure fuel reactivity. A new experimental high-pressure counterflow burner platform was designed and developed to achieve the studies of high-pressure cool flames. Dimethyl ether (DME) was chosen to study its non-premixed cool flame in high-pressure counterflow burner at pressure up to 5 atm, perhaps for the first time. This paper investigates the effects of pressure on cool flame structure, extinction and transition limits, and oxygen concentration dependence as well as ozone assisted warm flames of DME in experiments and numerical simulations. The results show that the reignition transition from cool flame to hot flame occurs either with the decrease of the strain rate at a given fuel concentration and pressure or with the increase of fuel mole fraction or pressure at a given strain rate. Furthermore, it is shown that the higher pressure shifts the cool flame to higher strain rates and results in higher cool flame extinction strain rates. However, the existing kinetic model of DME fails in predicting the cool flame extinction limit at elevated pressures. Besides, the cool flame extinction limits are proportional to nth power of the oxygen concentration, [O 2 ] n , and the increase of pressure leads to stronger extinction limit dependence (larger n) on oxygen concentration. The present experiment and detailed kinetic analysis show clearly that increasing pressure promotes the low-temperature chemistry including the oxygen addition reactions. In addition, stable warm flame was first experimentally observed by using DME at elevated pressure with ozone sensitization.

33 ADVANCED PROPULSION SYSTEMS↗

First-principles investigation of thermodynamic, elastic and electronic properties of Al{sub 3}V and Al{sub 3}Nb intermetallics under pressures

The thermodynamic, elastic, and electronic properties of D0{sub 22}-type Al{sub 3}V and Al{sub 3}Nb intermetallics were studied using the first-principle method. The results showed the pressure has profound effects on the structural, mechanical and electronic properties in both Al{sub 3}V and Al{sub 3}Nb. Thermodynamically, the formation enthalpies for Al{sub 3}V and Al{sub 3}Nb were derived, which agreed well with available experimental and theoretical values. Comparably, Al{sub 3}Nb was a more stable phase with the more negative H{sub f} than Al{sub 3}V. Mechanically, the calculated elastic constants showed linearly increasing tendencies, and satisfied the Born's criteria from 0–20 GPa, indicating the mechanically stability of Al{sub 3}V and Al{sub 3}Nb under this pressure range. Further, the mechanical parameters (i.e., bulk modulus (B), shear modulus (G), and Young's modulus (E)) were derived using the Voigt-Reuss-Hill (VRH) method, and in good agreement with available experimental results at the ground state. All these parameters presented the linearly increasing dependences on the external pressure. The B/G ratios and Poisson's ratio indicated that the Al{sub 3}V and Al{sub 3}Nb crystals should exhibit brittle behavior at 0–20 GPa. Additionally, the bulk modulus can be obtained through fitting the Birch-Murnaghan equation (B{sub 0}), computing by VRH method (B{sub H}), and deriving from the elastic theory (B{sub relax}) in both intermetallics. The uniformity of these calculated bulk moduli in each compound exhibited the excellent reliability and self-consistency. In addition, Debye temperature was estimated from the average sound velocity. The Debye temperature showed an increasing dependence on the pressures. Finally, through density of states analysis, Al{sub 3}V and Al{sub 3}Nb were suggested to possess naturally metallic behavior. Under pressures, it was noted that the shapes of peaks and pseudogaps exhibited relative few changes, suggesting Al{sub 3}V and Al{sub 3}Nb has kept structurally stable up to 20 GPa. At zero pressure, Al{sub 3}Nb was considered as a more structurally stable phase with the more number of bonding electrons per atom than Al{sub 3}V. This conclusion was in consistent with the one drawn from the thermodynamic analysis.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The effect of stress on the migration of He gas bubbles under a thermal gradient in Fe by phase-field modeling

Here a phase-field model is parameterized to study the effect of elastic stresses on the migration of He gas bubbles in Fe under a temperature gradient. Stresses caused by the gas bubble pressure and residual stress in the Fe matrix are considered. The dependence of He bubble migration velocity on the magnitude of the residual stress, average temperature, temperature gradient, and bubble size is measured. In agreement with a theoretical model based on surface diffusion, simulation results demonstrate that He bubbles move towards the high temperature region with velocities in Fe that are orders of magnitude faster than previously reported in UO 2 . It is found that local stresses in the matrix caused by the He bubble have negligible effect on the bubble migration process; however, residual stresses in the Fe matrix, potentially caused by processing or irradiation, can modestly modify bubble kinetics through pressure dependence of the He diffusion coefficients. Compressive residual stress decreases diffusion coefficients for bulk and surface diffusion mechanisms, thus reducing the migration velocity of the gas bubble. In contrast, tensile residual stress increases the diffusion coefficients, resulting in an increase in the gas bubble migration velocity. This pressure dependence is also consistent with a theoretical model. This phase field model lays the foundation for analysis of bubble coalescence-induced fracture in He bubble-containing steels.

36 MATERIALS SCIENCE↗

KinBot: Automated stationary point search on potential energy surfaces

KinBot is a Python code that automatically characterizes kinetically important stationary points on reactive potential energy surfaces and arranges the results into a form that lends itself easily to master equation calculations. This version of KinBot tackles C, H, O and S atom containing species and unimolecular (isomerization or dissociation) reactions. KinBot iteratively changes the geometry of the reactant to obtain initial guesses for reactive saddle points defined by KinBot’s reaction types, which are then optimized by a third-party quantum chemistry package. KinBot verifies the connectivity of the saddle points with the reactant and identifies the products through intrinsic reaction coordinate calculations. Here, new calculations can be automatically spawned from the products to obtain complete potential energy surfaces. The utilities of KinBot include conformer searches, projected frequency and hindered rotor calculations, and the automatic determination of the rotational symmetry numbers. Input files for popular RRKM master equation codes are automatically built, enabling an automated workflow all the way to the calculation of pressure and temperature dependent rate coefficients. Four examples are as follows: (i) [1,3]-sigmatropic H-migration reactions of unsaturated hydrocarbons and oxygenates are calculated to assess the relative importance of suprafacial and antrafacial reactions. (ii) Saddle points on three products of gamma-valerolactone thermal decomposition are studied and compared to literature potential energy surfaces. (iii) The previously published propene+OH reaction is reproduced to show the capability of building an entire potential energy surface. (iv) All species up to C4 in the Aramco Mech 2.0 are subjected to a KinBot search.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Estimating Fluctuating Pressures From Distorted Measurements

Two algorithms extract estimates of time-dependent input (upstream) pressures from outputs of pressure sensors located at downstream ends of pneumatic tubes. Effect deconvolutions that account for distoring effects of tube upon pressure signal. Distortion of pressure measurements by pneumatic tubes also discussed in "Distortion of Pressure Signals in Pneumatic Tubes," (ARC-12868). Varying input pressure estimated from measured time-varying output pressure by one of two deconvolution algorithms that take account of measurement noise. Algorithms based on minimum-covariance (Kalman filtering) theory.

Whitmore, Stephen A.↗