Search NASA⌕ Search

SEARCH · Search NASA

Results for “Phase shift”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,783 records · Page 99

Effect of ion bombarding energies on photocatalytic TiO{sub 2} films growing in a pulsed dual magnetron discharge

Photocatalytic crystalline TiO{sub 2} films were deposited by a pulsed dc dual magnetron system. The depositions were performed using two unbalanced magnetrons with planar titanium targets of 50 mm diameter in Ar+O{sub 2} gas mixtures at a total pressure of 0.9 Pa with oxygen partial pressures ranging from 0.2 to 0.9 Pa. The maximum substrate surface temperature was 160 deg. C Both magnetrons operated in the same asymmetric bipolar mode at the repetition frequencies of 100 and 350 kHz with a fixed 50% duty cycle and the average target power densities of 52-74 W cm{sup -2} in the negative voltage phase of the pulses, but the magnetron operations were shifted by a half of the period. Time-averaged energy-resolved mass spectroscopy was performed at a substrate position located 100 mm from the targets. The measured structure of the ion energy distributions was correlated with the distinct pulse phases of the magnetron discharges. A decrease in the energy delivered by fast ions (E{>=}10 eV) to the unit volume of the growing films, together with possible effects of plasma-chemical processes, during the depositions at the oxygen partial pressures of 0.5-0.75 Pa and the repetition frequency of 350 kHz resulted in a strong predominance of the highly photoactive crystalline anatase phase in the TiO{sub 2} films.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Light emission of a scarlike mode with assistance of quasiperiodicity

In an elliptic In{sub x}Ga{sub 1-x}AsP microcavity laser, various scarlike modes are experimentally observed. Below the lasing threshold, a bouncing-ball, a triangle, a double, and a triple bow-tie mode spontaneously emit. Above the threshold, a bow-tie scarlike mode lases alone. Our numerical analysis reveals that the bow-tie scarlike mode is not caused by regular islands in phase space due to the Goos-Haenchen shift, but by unstable periodic orbits and that the light emission is assisted by a quasiperiodic orbit.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Influence of powder metallurgy route on precipitation processes in MgTbNd alloy

Solution treated MgTb3Nd2 alloy (nominal composition in wt.%) (ST) and the alloy prepared by hot extrusion of isostatically pressed powder (PM) were isochronally heat treated and studied by electrical resistivity and hardness measurements and by differential scanning calorimetry. Microstructure development was investigated in transmission electron microscopy. Successive precipitation of transient phases in the sequence β″ (D0{sub 19} plates) → β′(cbco) → β{sub 1} (Mg{sub 3}Gd type, fcc) → β (Mg{sub 5}Gd type, fcc) known from the ST alloy was identified also in the PM alloy. The early precipitation stage (D0{sub 19} clusters) revealed in the ST alloy as well as precipitation of equilibrium β{sub e} phase Mg{sub 41}(Tb,Nd){sub 5} manifest themselves only slightly in the PM alloy. Powder metallurgy route does not change the values of activation energies but shifts the temperature ranges of these processes. Vickers hardness of the as prepared state is higher in the PM alloy and is very resistant against the heat treatment up to 510 °C. Contrary to the ST alloy precipitation due to isochronal annealing does not lead to pronounced hardness changes in the PM alloy. - Highlights: • Powder metallurgy (PM) does not change precipitation sequence in MgTbNd alloy. • Temperature ranges of transient phase precipitations are shifted in PM alloy. • Hardness is resistant against isochronal heat treatment up to 510 °C in the PM alloy. • PM procedure does not change activation energies of precipitation.

36 MATERIALS SCIENCE↗

Modulation of a membrane lipid lamellar-nonlamellar phase transition by cationic lipids: A measure for transfection efficiency

Synthetic cationic lipids can be used as DNA carriers and are regarded to be the most promising non-viral gene carriers. For this investigation, six novel phosphatidylcholine (PC) cationic derivatives with various hydrophobic moieties were synthesized and their transfection efficiencies for human umbilical artery endothelial cells (HUAEC) were determined. Three compounds with relatively short, myristoleoyl or myristelaidoyl 14:1 chains exhibited very high activity, exceeding by {approx}10 times that of the reference cationic derivative dioleoyl ethylPC (EDOPC). Noteworthy, cationic lipids with 14:1 hydrocarbon chains have not been tested as DNA carriers in transfection assays previously. The other three lipids, which contained oleoyl 18:1 and longer chains, exhibited moderate to weak transfection activity. Transfection efficiency was found to correlate strongly with the effect of the cationic lipids on the lamellar-to-inverted hexagonal, L{sub {alpha}} {yields} H{sub II}, phase conversion in dipalmitoleoyl phosphatidylethanolamine dispersions (DPoPE). X-ray diffraction on binary DPoPE/cationic lipid mixtures showed that the superior transfection agents eliminated the direct L{sub {alpha}} {yields} H{sub II} phase transition and promoted formation of an inverted cubic phase between the L{sub {alpha}} and H{sub II} phases. In contrast, moderate and weak transfection agents retained the direct L{sub {alpha}} {yields} H{sub II} transition but shifted to higher temperatures than that of pure DPoPE, and induced cubic phase formation at a later stage. On the basis of current models of lipid membrane fusion, promotion of a cubic phase by the high-efficiency agents may be considered as an indication that their high transfection activity results from enhanced lipoplex fusion with cellular membranes. The distinct, well-expressed correlation established between transfection efficiency of a cationic lipid and the way it modulates nonlamellar phase formation of a membrane lipid could be useful as a criterion to assess the quality of lipid carriers and for rational design of new and superior nucleotide delivery agents.

59 BASIC BIOLOGICAL SCIENCES↗

Xenon doping of Liquid Argon in ProtoDUNE Single Phase: first results

Doping Liquid Argon (LAr) with xenon is a known technique to shift the light emitted by argon (128 nm) to a longer wavelength to ease its detection. The largest Xenon doping test ever performed in a LArTPC was carried out in ProtoDUNE Single Phase (ProtoDUNE-SP) at the CERN Neutrino Platform. The response of such a large TPC (7701 of Liquid Argon and 4401 of fiducial mass) has been studied using the ProtoDUNE Photon Detection System (PDS) and a dedicated setup installed before the run. With the first, it was possible to study the light detected in the system as a function of the xenon concentration and to characterise the light collection efficiency with respect to the track position. With the second system it was possible to disentangle the LAr (128 nm) light from the xenon (178 nm) light using two dedicated X-ARAPUCA modules. The run was fully satisfactory, it was possible to measure directly the increase of the xenon light component during doping; furthermore most of the LAr light quenched by impurities was fully recovered even at small Xenon concentration (< 20 ppm in mass). A study of the collected scintillation light as a function of the track position showed an improvement of the detector response uniformity.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Joint Optimization for Transport and Bucket Loading Phases of Automated Wheel Loaders

This article investigates optimization of fuel-efficiency and productivity for automated wheel loaders. A control-oriented model for both the transport phase and bucket loading phase is proposed. Here, the vehicle model includes an automatic gear shift schedule that can be incorporated into the optimization problem. Based on the model, the multistage optimization problem is formulated to simultaneously consider all phases of a short cycle with physical constraints. Cycle time and fuel efficiency are used as the weighted performance indexes in a multiobjective cost function. Bucket fill factor is included as a constraint during the bucket loading phase. A nonlinear programming problem is created with collocation using MATLAB and CasADi. The optimization solver IPOPT solves the problem to obtain the optimal state and control trajectories, which can be used as a reference for automated wheel loaders or even as a driver advisory for human-driven wheel loaders.

42 ENGINEERING↗

Electric field assisted sputtering of Fe{sub 3}O{sub 4} thin films and reduction in anti-phase boundaries

Fe{sub 3}O{sub 4} thin films have been prepared by a new approach of in-situ electric field assisted sputtering. Raman shift, {rho}(T), and M(T) measurements reveal a reduction in anti-phase boundaries (APBs), which is explained by the electric field induced surface diffusion favouring [111] oriented growth with lesser defects. Early magnetization saturation (4 kOe) and its higher value (441 emu/cm{sup 3}), low electron phonon coupling constant (0.48), sharp Verwey transition {Delta}T{sub V} = 12 K, Arrhenius law of conduction via delocalized states above T{sub V} and lower value of localization radius (1.5 nm) below T{sub V} compared to that observed in un-assisted films confirmed that the electric field assisted grown films are nearly free from anti-phase boundaries.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetism in two-dimensional van der Waals materials

The discovery of materials has often introduced new physical paradigms and enabled the development of novel devices. Two-dimensional magnetism, which is associated with strong intrinsic spin fluctuations, has long been the focus of fundamental questions in condensed matter physics regarding our understanding and control of new phases. Here we discuss magnetic van der Waals materials: two-dimensional atomic crystals that contain magnetic elements and thus exhibit intrinsic magnetic properties. These cleavable materials provide the ideal platform for exploring magnetism in the two-dimensional limit, where new physical phenomena are expected, and represent a substantial shift in our ability to control and investigate nanoscale phases. Here, we present the theoretical background and motivation for investigating this class of crystals, describe the material landscape and the current experimental status of measurement techniques as well as devices, and discuss promising future directions for the study of magnetic van der Waals materials.

36 MATERIALS SCIENCE↗

Valence Transitions of Br-2 in Ar Matrices: Interaction With the Lattice And Predissociation

Fluorescence spectra from v{prime}=0 of the B, A and A{prime} states of Br{sub 2}/Ar are presented for excitation wavelengths from 630 to 540 nm with high resolution, to evaluate isotopic splittings in emission and absorption. The observed progression of sharp zero phonon lines (ZPLs) from v{prime}=2 to v{prime}=19 in B excitation is used to derive spectroscopic constants. The ZPL broadening and the growing phonon sideband (PSB) contributions indicate an increase of matrix influence on the X-B transition with rising v{prime}. Contributions of the PSB are parameterized with the Huang-Rhys coupling constant S, where S=1 near the potential minimum reflects the electron-phonon coupling and S=4 close to Franck-Condon maximum originates from vibrational coupling. The PSB spectral composition correlates with the matrix phonon density of states, and the ZPL broadens and shifts with temperature. Two crossings with repulsive states (between v{prime}=4-5 and v{prime}=7-9) leading to matrix induced predissociation and a third tentative one between v{prime}=14 and 15 are indicated by ZPL broadening, population flow, and spectral shifts. The crossing energies are close to gas phase and matrix calculations. The stepwise flow of intensity from B via repulsive states to A{prime} and, similarly, from the A continuum to A{prime} is discussed. Emission quantum efficiency of the B state decreases from near unity at v{prime}=0 to less than 10{sup -3} at v{prime}=19. Broadening of ZPL near crossings yields predissociation times of 5 and 2.5 ps corresponding to probabilities of 5% and 10% per round-trip for the two lowest crossings, respectively.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Simulation study of particle transport by weakly coherent mode in the Alcator C-Mod tokamak

A simulation study has been conducted of the physical mechanisms behind the weakly coherent mode (WCM) and its produced particle transport in the I-mode edge plasmas by using the BOUT++ code. The WCM is identified in our simulations by its poloidal and radial distributions as well as its frequency and wavenumber spectra. Its produced radial particle flux is calculated and compared with the experimental value. The good agreement indicates that the WCM is an important particle transport channel in the I-mode pedestal. It is found that the WCM can transport particles across the strong outer shear layer of the Er well established in the formation of I-mode, based on which a possible explanation is provided why I-mode does not feature a density pedestal. The key point lies in the change of the cross-phase between the electric potential and density fluctuations induced by the E × B Doppler shift. In the strong shear layer, although the electric potential fluctuation is significantly suppressed, the cross-phase is close to π/2, resulting in a strong drive of the density fluctuation and particle transport. To identify the physical nature of the WCM, a linear dispersion relation for drift Alfvén modes is derived in the slab geometry. A drift Alfvén wave instability is found to have similar dependence to the simulated linear instability behind the WCM on the resistivity and the parallel electron pressure gradient and thermal force terms in the parallel Ohm's law.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Neutron and X-ray investigations of the Jahn–Teller switch in partially deuterated ammonium copper Tutton salt, (NH 4 ) 2 [Cu(H 2 O) 6 ](SO 4 ) 2

The structural phase transition accompanied by a Jahn–Teller switch has been studied over a range of H/D ratios in (NH 4 ) 2 [Cu(H 2 O) 6 ](SO 4 ) 2 (ACTS). In particular, single-crystal neutron diffraction investigations of crystals with deuteration in the range 50 to 82% are shown to be consistent with previous electron paramagnetic resonance (EPR) experiments exhibiting a phase boundary at 50% deuteration under ambient pressure. Polycrystalline samples show that the two phases can co-exist. In addition, single-crystal neutron and polycrystalline X-ray diffraction pressure experiments show a shift to lower pressure at 60% deuteration versus previous measurements at 100% deuteration.

deuterium isotope phase transition↗

Effect of calcination temperature on structural and photocatalyst properties of nanofibers prepared from low-cost natural ilmenite mineral by simple hydrothermal method

Graphical abstract: - Highlights: • Nanofibers were prepared from low-cost ilmenite mineral via simple hydrothermal. • High photocatalyst nanofibers were prepared via post heat treatment method. • The nanofibers calcined at 100–700 °C for 2 h maintained nanofiber structure. • The calcined nanofibers at 400 °C showed the highest photocatalytic activity. - Abstract: Titanate nanofibers were synthesized via the hydrothermal method (120 °C for 72 h) using natural ilmenite mineral (FeTiO{sub 3}) as the starting material. The samples were characterized by X-ray diffraction (XRD), X-ray fluorescent (XRF), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and Brunauer–Emmett–Teller (BET) for specific surface area. The nanofibers were 20–90 nm in diameter and 2–7 μm in length. The as-synthesized nanofibers calcined at 300–400 °C showed TiO{sub 2} (B) whereas the nanofibers calcined at 500 °C revealed a mixture of two phases of TiO{sub 2} (B) and anatase. The nanofibers calcined at high temperature of 600–1000 °C showed a mixture of tri-crystalline of anatase, rutile, and Fe{sub 2}O{sub 3}. The rutile phase increased with increasing calcination temperature. The nanofibers calcined at 300–700 °C maintained their structure while the morphology of the nanofibers calcined at 800–1000 °C transformed into submicron rod-like structure. This increase of calcination temperature led to the phase transformation from thermodynamically metastable anatase to the most stable form of rutile phase. The crystallite size of prepared samples increased with increasing calcination temperature. Interestingly, with increasing calcination temperature, the absorption edge of the prepared samples shows an obvious shift to visible light region due to the change of crystallite phase and increased crystallite size. Therefore, the band gap energy of the prepared samples became narrower with increasing calcination temperature. Furthermore, the photocatalytic activity of the nanofibers calcined at 400 °C for 2 h was found to be not merely higher than those of the commercially available TiO{sub 2} nanoparticles powders (P-25, JRC-01, and JRC-03) but also the highest of all the samples in this study.

36 MATERIALS SCIENCE↗

Aqueous-phase effects on ethanol decomposition over Ru-based catalysts

The effects of an aqueous phase on ethanol decomposition for hydrogen production over a Ru(0001) catalyst surface model have been investigated from first principles. Solvent effects on the reaction mechanism and kinetic parameters have been quantified with the help of a microkinetic reactor model, density functional theory, and an implicit solvation scheme (iSMS). Our calculations indicate that in both vapor- and aqueous-phase reaction environments, the ethanol decomposition starts with acetaldehyde formation on the surface, some of which further dehydrogenates to ketenyl species (CHCO), where the C–C bond cleaves to form methylidyne (CH) and CO. In the vapor phase, adsorbed CH gets hydrogenated to methane, and CO desorbs or undergoes methanation reducing the amount of hydrogen produced. In contrast, under aqueous phase reaction conditions, the methanation is inhibited, and the water–gas shift (WGS) reaction is accelerated, leading to complete conversion of CO to CO 2 and H 2 . Furthermore, calculations indicate that the observed reaction behavior under aqueous phase reforming conditions originates primarily from the higher water chemical potential, and implicit solvent models predict only a small solvation effect.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ultra-soft magnetic properties and correlated phase analysis by {sup 57}Fe Mössbauer spectroscopy of Fe{sub 74}Cu{sub 0.8}Nb{sub 2.7}Si{sub 15.5}B{sub 7} alloy

A detailed study of magnetic softness has been performed on FINEMENT type of ribbons by investigating the BH loop with maximum applied field of 960 A/m. The ribbon with the composition of Fe{sub 74}Cu{sub 0.8}Nb{sub 2.7}Si{sub 15.5}B{sub 7} was synthesized by rapid solidification technique and the compositions volume fraction was controlled by changing the annealing condition. Detail phase analysis was performed through X-ray diffraction (XRD), Differential scanning calorimetry (DSC), Vibrating sample magnetometer (VSM) and Mössbauer spectroscopy in order to correlate the ultrasoft magnetic properties with the volume fraction of amorphous and α-Fe(Si) soft nano composites. Bright (BF) and dark field (DF) image with selective area diffraction (SAD) patterns by the transmission electron microscopy (TEM) of the sample annealed for the optimized annealed condition at 853 K for 3 min reveals nanocrystals with an average size between 10-15 nm possessing the bcc structure which matches with the grain size revealed by the X-ray diffraction. Kinetics of crystallization of α-Fe(Si) phases has been determined by DSC curves. Extremely small coercivity of 30.9 A/m and core loss of 2.5 W/Kg for the sample annealed at 853 K for 3 min was found. Similar values for other crystalline conditions were determined by using BH loop tracer with a maximum applied field of around 960 A/m. Mössbauer spectroscopy was used to determine chemical shift, hyperfine field distribution (HFD), and peak width of different phases. The volume fractions of the relative amount of amorphous and crystalline phases are also determined by Mössbauer spectroscopy. High saturation magnetization along with ultrasoft magnetic properties exhibits very high potentials technological applications.

36 MATERIALS SCIENCE↗

Phase transitions of β-ZnTe(en) 0.5 under hydrostatic pressure

Organic–inorganic hybrid semiconductors have enhanced and distinctive material properties. β-ZnTe(en) 0.5 , which consists of alternating layers of two-monolayer-thick zinc telluride (ZnTe) and ethylenediamine (en), exhibits high crystallinity, stability, and tunable optical properties. Using x-ray diffraction (XRD) and Fourier transform infrared spectroscopy, this study investigated the structural response of β-ZnTe(en) 0.5 to applied hydrostatic pressure. Pressure-induced phase transitions were observed at 2.1 and 3.3 GPa. Shifts in the XRD peaks indicate substantial anisotropy in the pressure response, with the layer stacking direction ( b axis) exhibiting high compressibility. The a and b lattice parameters showed −0.55% strain/GPa and −2.26% strain/GPa, respectively, contradicting theoretical calculations that predicted a more isotropic response. IR spectroscopy revealed abrupt changes in NH 2 and CH 2 vibrational modes corresponding to the phase transitions.

Chemical compounds↗