Search NASA⌕ Search

SEARCH · Search NASA

Results for “Polymer Science”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,783 records · Page 99

Increase in the effective viscosity of polyethylene under extreme nanoconfinement

Understanding polymer transport in nanopores is crucial for optimizing heterogeneously catalyzed processes in polymer upcycling and fabricating high-performance nanocomposite films and membranes. Although confined polymer dynamics have been extensively studied, the behavior of polyethylene (PE)—the most widely used commodity polymer—in pores smaller than 20 nm remains largely unexplored. We investigate the effects of extreme nanoconfinement on PE transport using capillary rise infiltration in silica nanoparticle packings with average pore radii ranging from ~1 to ~9 nm. Using in situ ellipsometry and the Lucas–Washburn model, we discover a previously unknown inverse relationship between effective viscosity (η eff ) and average pore radius (R pore ). Additonally, we determine that PE transport under these extreme conditions is primarily governed by physical confinement, rather than pore surface chemistry. We refine an existing theory to provide a generalized formalism to describe the polymer transport dynamics over a wide range of pore radii (from 1 nm and larger). Our results offer valuable insights for optimizing catalyst supports in polymer upcycling and improving infiltration processes for nanocomposite fabrication.

36 MATERIALS SCIENCE↗

Self-Assembly of Partially Charged Diblock Copolymer-Homopolymer Ternary Blends

Ternary blends comprising of a diblock copolymer and the corresponding homopolymers provide ready access to a variety of morphologies, but the impact of charge on their phase behavior has not been studied extensively. Here, three partially charged ternary blends consisting of symmetric poly[(oligo(ethylene glycol) methyl ether methacrylate-co-oligo(ethylene glycol) propyl sodium sulfonate methacrylate)] (POEGMA#), polystyrene (PS), and POEGMA#-PS with different charge fractions were prepared, where # denotes the mole fraction of charged monomers in the POEGMA chain. Here, the phase behavior was systematically studied using small-angle X-ray scattering (SAXS), and isothermal phase diagrams at 120 °C were constructed. The resulting isothermal planes contain a wide lamellar (LAM) phase window with a slight deviation from symmetry for ion-containing ternary blends, due to the homopolymer size difference. Given the absence of any significant change in the phase diagrams as the charge fraction increases, the role of charge is primarily to increase the segregation strength in the ternary system, as in the case of partially charged diblock polymers. In addition, examination of the increase in domain size along the volumetrically symmetric isopleth reveals a “dry-brush” like swelling behavior of homopolymers in all three blends, presumably due to the space-filling nature of the oligomeric ethylene glycol side chains on POEGMA.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

3D Ion-Conducting, Scalable, and Mechanically Reinforced Ceramic Film for High Voltage Solid-State Batteries

Concerning the safety aspects of Li+ ion batteries, an epoxy-reinforced thin ceramic film (ERTCF) is prepared by firing and sintering a slurry-casted composite powder film. The ERTCF is composed of Li + ion conduction channels and is made of high amounts of sintered ceramic Li 1+ x Ti 2-x Al x (PO 4 ) 3 (LATP) and epoxy polymer with enhanced mechanical properties for solid-state batteries. The two- and three-dimensional characterizations are conducted not only for showing continuous Li+ ion channels thorough LATP ceramic channels with over 10-4 S cm-1 of ionic conductivity but also to investigate small amounts of epoxy polymer with enhanced mechanical properties. Solid-state Li + ion cells are fabricated using the ERTCF and they show initial charge–discharge capacities of 139/133 mAh g -1 . Furthermore, the scope of the ERTCF is expanded to high-voltage (>8 V) solid-state Li + ion batteries through a bipolar stacked cell design. Hence, it is expected that the present investigation will significantly contribute in the preparation of the next generation reinforced thin ceramic film electrolytes for high-voltage solid-state batteries.

25 ENERGY STORAGE↗

Electroluminescence property of organic light emitting diode (OLED)

Transport properties of electrons and holes were investigated not only in a anthracene-containing poly(p-phenylene-ethynylene)- alt - poly(p-phenylene-vinylene) (PPE-PPV) polymer (AnE-PVstat) light emitting diodes (OLED) but also in an ITO/Ag/polymer/Ag electron and ITO/PEDOT:PSS/polymer/Au hole only devices. Mobility of injected carriers followed the Poole-Frenkel type conduction mechanism and distinguished in the frequency range due to the difference of transit times in admittance measurement. Beginning of light output took place at the turn-on voltage (or flat band voltage), 1.8 V, which was the difference of energy band gap of polymer and two barrier offsets between metals and polymer.

36 MATERIALS SCIENCE↗

Comparison of the spatial statistics of random and defined-sequence photoresist films

The resolution-line edge roughness-sensitivity tradeoff has motivated the exploration of potential improvements using defined sequence polymers and polymer-bound photoacid generators and quenchers. We characterize the internal structures of positive tone photoresist polymer films formed from defined sequence polymers and compare them with random copolymers of the same composition. We model their imaging to connect initially to developable film structures. We use a polymer packing algorithm to simulate films of diverse compositions and locations of photoacid generators and quenchers, using the composition of an ESCAP photoresist. We use a simple extreme ultraviolet exposure-deprotection algorithm to model developable image formation within them. In all cases, the spatial distribution of chemical moieties in the film for defined sequence polymers is nearly indistinguishable from random copolymers. We evaluate several exposure-deprotection scenarios and find that a defined sequence copolymer has a distinctive developable image under certain circumstances. The use of defined sequence polymers within a photoresist layer does not automatically result in improved imaging; however, they do have some characteristics different from random polymers of the same composition. Further study of these characteristics may provide a route to improved control over the nanoscale imaging process.

36 MATERIALS SCIENCE↗

Applying machine learning and quantum chemistry to predict the glass transition temperatures of polymers

Glass transition temperature (T g ) is important for understanding the physical and mechanical properties of a polymer material because it relates to the thermal energy required to transition between a hard glassy state and a soft rubbery one. Over the years, various models have been developed for predicting this thermal property from molecular structure to aid in designing novel polymers in selected classes. This work builds on those efforts by utilizing both machine learning (ML) and quantum chemistry (QC) techniques to develop models that can predict T g values from the molecular structure under different data availability scenarios and for a wide variety of polymer types. For the ML model, a graph convolutional network (GCN) was used to map topological polymer features; this model was trained against a dataset of more than 7500 T g values and resulted in a root mean square error (RMSE) of 38.1 °C. The QC-based regression model was trained on 83 T g values and produced an RMSE of 34.5 °C. In conclusion, this work demonstrated that while both model techniques produce accurate predictions and are suitable for different data availability scenarios, the QC-based regression model offered a more interpretable model framework with significantly less training data.

36 MATERIALS SCIENCE↗

Multifunctional Properties of Cyanate Ester Composites with SiO2 Coated Fe3O4 Fillers

SiO2 coated Fe3O4 submicrometer spherical particles (a conducting core/insulating shell configuration) are fabricated using a hydrothermal method and are loaded at 10 and 20 vol % into a bisphenol E cyanate ester matrix for synthesis of multifunctional composites. The dielectric constant of the resulting composites is found to be enhanced over a wide frequency and temperature range while the low dielectric loss tangent of the neat cyanate ester polymer is largely preserved up to 160 ?C due to the insulating SiO2 coating on individual conductive Fe3O4 submicrometer spheres. These composites also demonstrate high dielectric breakdown strengths at room temperature. Dynamic mechanical analysis indicates that the storage modulus of the composite with a 20 vol % filler loading is twice as high as that of neat resin, but the glass transition temperature considerably decreases with increasing filler content. Magnetic measurements reveal a large saturation magnetization and negligibly low coercivity and remanent magnetization in these composites.

36 MATERIALS SCIENCE↗

Materials 2018 Annual Progress Report

The Materials Technology Program supports the Vehicles Technologies Office’s mission to help consumers and businesses reduce their transportation energy costs while meeting or exceeding vehicle performance expectations. The propulsion materials research portfolio seeks to develop higher performance materials that can withstand increasingly extreme environments and address the future properties needs of a variety of high-efficiency powertrain types, sizes, fueling concepts, and combustion modes. Advanced lightweight materials enable improvements in fuel economy by providing properties that are equal to or better than traditional materials at a lower weight. Because it takes less energy to accelerate a lighter object, replacing cast-iron and traditional steel components with lightweight materials such as high-strength steel, magnesium (Mg), aluminum (Al), and polymer composites can directly reduce a vehicle’s fuel consumption. Materials technology activities focus on the following cost and performance targets: (1) enable a 25% weight reduction for light-duty (LD) vehicles including body, chassis, and interior as compared to a model year 2012 baseline at no more than a $\$$5/lb-saved increase in cost; and (2) validate a 25% improvement in high-temperature (300°C) development of engine exhaust catalyst materials strength relative to components made with 2010 baseline cast Al alloys (A319 or A356) for improved efficiency LD engines.

33 ADVANCED PROPULSION SYSTEMS↗

Boron nitride nanosheets as oxygen-atom corrosion protective coatings

The research of two-dimensional nanomaterials for anticorrosion applications is just recently burgeoning. Herein, we demonstrate the boron nitride nanosheets (BNNSs) coatings for protecting polymer from oxygen-atom corrosion. High-quality BNNSs, which are produced by an effective fluid dynamics method with multiple exfoliation mechanisms, can be assembled into coatings with controlled thickness by vacuum filtration. After exposed in atom oxygen, the naked polymer is severely corroded with remarkable mass loss, while the BNNSs-coated polymer remains intact. Barrier and bonding effects of the BNNSs are responsible for the coating's protective performance. These preliminary yet reproducible results pave a way for resisting oxygen-atom corrosion.

36 MATERIALS SCIENCE↗

Robust Chemiresistive Behavior in Conductive Polymer/MOF Composites

Metal-organic frameworks (MOFs) are promising materials for gas sensing but are often limited to single-use detection. A hybridization strategy is demonstrated synergistically deploying conductive MOFs (cMOFs) and conductive polymers (cPs) as two complementary mixed ionic-electronic conductors in high-performing stand-alone chemiresistors. This work presents significant improvement in i) sensor recovery kinetics, ii) cycling stability, and iii) dynamic range at room temperature. The effect of hybridization across well-studied cMOFs is demonstrated based on 2,3,6,7,10,11-hexahydroxytriphenylene (HHTP) and 2,3,6,7,10,11-hexaiminotriphenylene (HITP) ligands with varied metal nodes (Co, Cu, Ni). A comprehensive mechanistic study is conducted to relate energy band alignments at the heterojunctions between the MOFs and the polymer with sensing thermodynamics and binding kinetics. The findings reveal that hole enrichment of the cMOF component upon hybridization leads to selective enhancement in desorption kinetics, enabling significantly improved sensor recovery at room temperature, and thus long-term response retention. This mechanism is further supported by density functional theory calculations on sorbate–analyte interactions. It is also found that alloying cPs and cMOFs enables facile thin film co-processing and device integration, potentially unlocking the use of these hybrid conductors in diverse electronic applications.

36 MATERIALS SCIENCE↗

X-ray Talbot-Lau interferometer for high-speed phase imaging and tomography using white synchrotron radiation

The Talbot interferometer using white synchrotron radiation has already been demonstrated for high-speed X-ray phase imaging and tomography as well as four-dimensional phase tomography for an observation of a dynamic specimen. In those previous experiments, the grating lines were oriented horizontally because the synchrotron radiation source size is large in the horizontal direction, and only the vertical spatial coherence satisfies the requirement for the operation of the Talbot interferometer given its distance from the source. For non-rigid samples, the horizontal axis of rotation causes unwanted motion of the sample due to gravity which results to artifact in the tomography reconstruction. For fluid samples, a vertical rotation axis is certainly necessary. While it is possible to orient the sample rotation axis perpendicular to the grating lines of the Talbot interferometer, solving the definite integral of the differential phase images to obtain the phase shift for x-ray phase tomography proves to be cumbersome when the sample extends outside the image and there is no null region for which the integration constant is known. In this work we aimed at increasing the spatial coherence of the x-rays along the horizontal so that the grating lines and the sample rotation axis could be oriented vertically. A Talbot-Lau interferometer was constructed by adding an absorption grating which acted as vertical line sources of horizontally spatially coherent white synchrotron radiation to the Talbot interferometer. An average of 20% moire fringe visibility was obtained. The set-up was demonstrated for highspeed phase tomography of a polymer sample.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Micro-differential scanning calorimeter for liquid biological samples

Here, we developed an ultrasensitive micro-DSC (differential scanning calorimeter) for liquid protein sample characterization. Our design integrated vanadium oxide thermistors and flexible polymer substrates with microfluidics chambers to achieve a high sensitivity (6 V/W), low thermal conductivity (0.7 mW/K), high power resolutions (40 nW), and well-defined liquid volume (1 μl) calorimeter sensor in a compact and cost-effective way. Furthermore, we demonstrated the performance of the sensor with lysozyme unfolding. The measured transition temperature and enthalpy change were in accordance with the previous literature data. This micro-DSC could potentially raise the prospect of high-throughput biochemical measurement by parallel operation with miniaturized sample consumption.

42 ENGINEERING↗

Polyethylene Grafted Silica Nanoparticles Prepared via Surface-Initiated ROMP

Polyethylene and nanosilica represent the most ubiquitous commodity plastic and nanocomposite filler, respectively. Despite their possible utility, few examples exist in the literature of successfully combining these two materials to form polyethylene nanocomposites. Synthesizing well-defined polyethylene grafted to a surface is a significant challenge in the nanocomposites community. Presented in this paper is a synthetic approach toward polyethylene grafted nanoparticles with controllable graft density and molecular weight of the grafted polymer. The variably grafted nanoparticles were then incorporated into a commercial high density polyethylene matrix. The synthesis, characterization, and challenges in making these materials are further discussed.

36 MATERIALS SCIENCE↗

Mechanoresponsive system based on sub-micron chitosan-functionalized ferromagnetic disks.

We report a doxorubicin loaded chitosan biopolymer-ferromagnetic disks hybrid system capable of on-demand magnetomechanically induced release of drug molecules. Gold covered ferromagnetic disks were encapsulated into the polymer scaffold through the assembly of the thiolated chitosan on the disk's gold surface followed by entrapping of the doxorubicin drug within a cross-linked polymer matrix. We demonstrate that the release process can be effectively tuned and controlled by varying the magnetic field characteristics: orientation, amplitude, frequency and duration.

36 MATERIALS SCIENCE↗

Eigenvector centrality is a metric of elastomer modulus, heterogeneity, and damage

Here, we present an application of eigenvector centrality to encode the connectivity of polymer networks resolved at the micro- and meso-scopic length scales. This method captures the relative importance of different nodes within the network structure and provides a route toward the development of a statistical mechanics model that correlates connectivity with mechanical response. This scheme may be informed by analytical and semi-analytical models for the network structure, or through direct experimental examination. It may be used to predict the reduction in mechanical performance for heterogeneous materials subjected to specific modes of damage. Here, we develop the method and demonstrate that it leads to the prediction of established trends in elastomers. We also apply the model to the case of a self-healing polymer network reported in the literature, extracting insight about the fraction of bonds broken and re-formed during strain and recovery.

36 MATERIALS SCIENCE↗

Spray-Formed Tooling with Micro-Scale Features

Molds, dies, and related tooling are used to shape many of the plastic and metal components we use every day at home and work. Traditional mold-making practices are labor and capital equipment intensive, involving multiple machining, benching and heat treatment operations. Spray forming is an alternative method to manufacture molds and dies. The general concept is to atomize and deposit droplets of a tooling alloy onto a pattern to form a thick deposit while imaging the pattern’s shape, surface texture and details. Unlike conventional machining, this approach can be used to fabricate tooling with micro-scale surface features. This paper describes a research effort to spray form molds and dies that are used to image micro-scale surface textures into polymers. The goal of the study is to replicate textures that give rise to superhydrophobic behavior by mimicking the surface structure of highly water repellent biological materials such as the lotus leaf. Spray conditions leading to high transfer fidelity of features into the surface of molded polymers will be described. Improvements in water repellency of these materials was quantified by measuring the static contact angle of water droplets on flat and textured surfaces.

36 MATERIALS SCIENCE↗

A materials data framework and dataset for elastomeric foam impact mitigating materials

The availability of materials data for impact-mitigating materials has lagged behind applications-based data. For example, data describing on-field helmeted impacts are available, whereas material behaviors for the constituent impact-mitigating materials used in helmet designs lack open datasets. Here, we describe a new FAIR (findable, accessible, interoperable, reusable) data framework with structural and mechanical response data for one example elastic impact protection foam. The continuum-scale behavior of foams emerges from the interplay of polymer properties, internal gas, and geometric structure. This behavior is rate and temperature sensitive, therefore, describing structure-property characteristics requires data collected across several types of instruments. Data included are from structure imaging via micro-computed tomography, finite deformation mechanical measurements from universal test systems with full-field displacement and strain, and visco-thermo-elastic properties from dynamic mechanical analysis. These data facilitate modeling and design efforts in foam mechanics, e.g., homogenization, direct numerical simulation, or phenomenological fitting. The data framework is implemented using data services and software from the Materials Data Facility of the Center for Hierarchical Materials Design.

36 MATERIALS SCIENCE↗

Surface Texturing of Polyimide Composite by Micro-Ultrasonic Machining

In this study, micro-dimples were prepared on a polyimide composite surface to obtain the dual benefits of polymer materials and surface texture. Micro-ultrasonic machining is employed for the first time for micro-dimple fabrication on polyimide composite surfaces. Surface textures of simple patterns were fabricated successfully with dimple depths of 150 μm, side lengths of 225-425 μm, and area ratios of 10-30%. The friction coefficient of the micro-dimple surfaces with side lengths of 325 or 425 μm could be increased by up to 100% of that of non-textured surfaces, alongside a significant enhancement of wear resistance. The results show that surface texturing of polyimide composite can be applied successfully to increase the friction coefficient and reduce wear, thereby contributing to a large output torque.

36 MATERIALS SCIENCE↗