Search NASA⌕ Search

SEARCH · Search NASA

Results for “Process Modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,783 records · Page 99

Supply Chain Sustainability Analysis of Whole Algae Hydrothermal Liquefaction and Upgrading

The Department of Energy’s Bioenergy Technology Office (BETO) collaborates with a wide range of institutions towards the development and deployment of biofuels and bioproducts. To facilitate this effort, BETO and its partner national laboratories develop detailed techno-economic assessments (TEA) of biofuel production technologies as part of the development of design cases and state of technology (SOT) analyses. A design case is a TEA that outlines a target case for a particular biofuel pathway. It enables preliminary identification of data gaps and research and development needs and provides goals and targets against which technology progress is assessed. On the other hand, an SOT analysis assesses progress within and across relevant technology areas based on actual experimental results relative to technical targets and cost goals from design cases and includes technical, economic, and environmental criteria as available. BETO also develops supply chain sustainability analyses (SCSA) for key biofuel production technologies that are the subject of design case or SOT analyses (Dunn et al. 2013). The SCSA utilizes a life-cycle analysis to estimate the energy use and greenhouse gas (GHG) emissions associated with biofuel production and assists in comparing several biofuel pathways. This report documents an SCSA of whole algae hydrothermal liquefaction (AHTL) as the conversion technology to produce renewable diesel (RD). Jones et al. (2014) developed the design case process model that provides the material and energy intensity of the feedstock conversion step in the SCSA. In this study, conversion of algal biomass to RD is achieved by whole AHTL, as described in the design report by Pacific Northwest National Laboratory (Jones et al., 2014). Wet algal biomass, as undisrupted cells, is converted into a liquid fuel with pressurized water in a condensed phase. The SCSA for this pathway is described.

09 BIOMASS FUELS↗

High Energy Theory Workshops and Visitors at the Michigan Center for Theoretical Physics FY15

The String theory workshop was held from March 4-7, 2015 on the University of Michigan campus. Local organizers were Gordon Kane and Aaron Pierce. Piyush Kumar (Yale), Jim Halverson (KITP), Bobby Acharya (ICTP) and Sven Krippendorf (Oxford) served as external organizers.The meeting focused on the status of work to project 10 or 11 dimensional string/M theories onto our 4 spacetime dimensions (compactification). The workshop had 31 participants, half from outside the U.S. Participants were encouraged to focus on predictions for recent and forthcoming data, particularly for Higgs physics and LHC and dark matter, rather than on the traditional approach of embedding the Standard Model particles and forces. The Higgs boson sympoosium was locally organized by James Wells (chair), Aaron Pierce and Jianming Qian. Additional input in the early stages by Stefan Pokorski (Warsaw) who was unable to attend in the end. The workshop consistent of 22 talks from experts around the world, both theoretical and experimental. Experimentalists summarized the current state of knowledge of the Higgs boson and its varients. The theory talks ranged from technical calculations of Standard Model processes to speculative novel ideas. The YHET visitor program invited weekly young visitors to the University of Michigan campus to present their work. This year 24 participants came under the program, with 17 of them receiving at least partial support for their visits.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Electron-Ion Dynamics with Time-Dependent Density Functional Theory: Towards Predictive Solar Cell Modeling: Final Technical Report

This project investigates the accuracy of currently-used functionals in time-dependent density functional theory, which is today routinely used to predict and design materials and computationally model processes in solar energy conversion. The rigorously-based electron-ion dynamics method developed here sheds light on traditional methods and overcomes challenges those methods have. The fundamental research undertaken here is important for building reliable and practical methods for materials discovery. The ultimate goal is to use these tools for the computational design of new materials for solar cell devices of high efficiency.

14 SOLAR ENERGY↗

Sensitivity-Uncertainty Based Nuclear Criticality Safety Validation

These are slides from a seminar given to the University of Mexico Nuclear Engineering Department. Whisper is a statistical analysis package developed to support nuclear criticality safety validation. It uses the sensitivity profile data for an application as computed by MCNP6 along with covariance files for the nuclear data to determine a baseline upper-subcritical-limit for the application. Whisper and its associated benchmark files are developed and maintained as part of MCNP6, and will be distributed with all future releases of MCNP6. Although sensitivity-uncertainty methods for NCS validation have been under development for 20 years, continuous-energy Monte Carlo codes such as MCNP could not determine the required adjoint-weighted tallies for sensitivity profiles. The recent introduction of the iterated fission probability method into MCNP led to the rapid development of sensitivity analysis capabilities for MCNP6 and the development of Whisper. Sensitivity-uncertainty based methods represent the future for NCS validation – making full use of today’s computer power to codify past approaches based largely on expert judgment. Validation results are defensible, auditable, and repeatable as needed with different assumptions and process models. The new methods can supplement, support, and extend traditional validation approaches.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

The Effect of Rolling As-Cast and Homogenized U-10Mo Samples on the Microstructure Development and Recovery Curves

Over the past several years Pacific Northwest National Laboratory (PNNL) has been actively involved in supporting the U.S. Department of Energy National Nuclear Security Administration Office of Material Management and Minimization (formerly Global Threat Reduction Initiative). The U.S. High- Power Research Reactor (USHPRR) project is developing alternatives to existing highly enriched uranium alloy fuel to reduce the proliferation threat. One option for a high-density metal fuel is uranium alloyed with 10 wt% molybdenum (U-10Mo). Forming the U-10Mo fuel plates/foils via rolling is an effective technique and is actively being pursued as part of the baseline manufacturing process. The processing of these fuel plates requires systematic investigation/understanding of the pre- and post-rolling microstructure, end-state mechanical properties, residual stresses, and defects, their effect on the mill during processing, and eventually, their in-reactor performance. In the work documented herein, studies were conducted to determine the effect of cold and hot rolling the as-cast and homogenized U-10Mo on its microstructure and hardness. The samples were homogenized at 900°C for 48 h, then later annealed for several durations and temperatures to investigate the effect on the material’s microstructure and hardness. The rolling of the as-cast plate, both hot and cold, was observed to form a molybdenum-rich and -lean banded structure. The cold rolling was ineffective, and in some cases exacerbated the as-cast defects. The grains elongated along the rolling direction and formed a pancake shape, while the carbides fractured perpendicularly to the rolling direction and left porosity between fractured particles of UC. The subsequent annealing of these samples at sub-eutectoid temperatures led to rapid precipitation of the ' lamellar phase, mainly in the molybdenum-lean regions. Annealing the samples above the eutectoid temperature did not refine the grain size or the banded microstructure. However, annealing the samples led to quick recovery in hardness as evidenced by a drop in Vickers hardness of 20%. Hot rolling was performed at 650 and 800°C. The hot-rolling mill loads (load separation force) were approximately 40 to 50% less than the cold-rolling for the same reduction and thickness. It was observed that hot rolling the samples with 50% or more reduction in thickness were responsible for dynamic recrystallization in the hot-rolled samples and led to grain refinement. Unlike the cold-rolled samples, the hot-rolled samples did not fracture the carbides and appeared to heal the casting defects. The recovery phenomenon was similar to the cold-rolled samples above the eutectoid temperatures, but owing to the refined grain size, the precipitation of the lamellar phase was far more rapid in these samples and the hardness increased more rapidly than in the cold rolled sample when heated below the eutectoid temperature. The data generated from these rolling efforts has been used to make the process modeling efforts more robust and applicable to all USHPRR partner rolling mills. The flow stress for cold rolling the samples was determined to be between 170-190 ksi, with frictional forces between 0.2 and 0.4 for the PNNL mill. The measured roll separation forces and those simulated using finite element methods for hot and cold rolling for the PNNL rolling mill were in good agreement.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Integrated Facilities and Infrastructure Plan.

Our facilities and infrastructure are a key element of our capability-based science and engineering foundation. The focus of the Integrated Facilities and Infrastructure Plan is the development and implementation of a comprehensive plan to sustain the capabilities necessary to meet national research, design, and fabrication needs for Sandia National Laboratories’ (Sandia’s) comprehensive national security missions both now and into the future. A number of Sandia’s facilities have reached the end of their useful lives and many others are not suitable for today’s mission needs. Due to the continued aging and surge in utilization of Sandia’s facilities, deferred maintenance has continued to increase. As part of our planning focus, Sandia is committed to halting the growth of deferred maintenance across its sites through demolition, replacement, and dedicated funding to reduce the backlog of maintenance needs. Sandia will become more agile in adapting existing space and changing how space is utilized in response to the changing requirements. This Integrated Facilities & Infrastructure (F&I) Plan supports the Sandia Strategic Plan’s strategic objectives, specifically Strategic Objective 2: Strengthen our Laboratories’ foundation to maximize mission impact, and Strategic Objective 3: Advance an exceptional work environment that enables and inspires our people in service to our nation. The Integrated F&I Plan is developed through a planning process model to understand the F&I needs, analyze solution options, plan the actions and funding, and then execute projects.

99 GENERAL AND MISCELLANEOUS↗

Understanding the Response of Photosynthetic Metabolism in Tropical Forests to Seasonal Climate Variations. Final Report

This U.S-Brazil collaboration for GOAmazon has investigated a deceptively simple question: what controls the response of photosynthesis in Amazon tropical forests to seasonal variations in climate? In the past this question has been difficult to answer with modern earth system process models. We hypothesized that observed dry season increases in photosynthetic capacity are controlled by the phenology of leaf flush and litter fall, from which the seasonal pattern of LAI emerges. Our results confirm this hypothesis (Wu et al., 2016). Synthesis of data collected throughout the 3-year project period continues through December 31, 2017 under no-cost extensions granted to the project teams at University of Michigan and University of Arizona (Award 2). The USGS component (Award 1) ceased on the final date of the project performance period, December 31, 2016. This report summarizes the overall activities and achievements of the project, and constitutes the final project report for the USGS component. The University of Michigan will submit a separate final report that includes additional results and deliverables achieved during the period of their and the University of Arizona’s no-cost extension, which will end on December 31, 2017.

59 BASIC BIOLOGICAL SCIENCES↗

A Search for New Resonances with the Dijet Angular Ratio Using the Compact Muon Solenoid Experiment

A search for dijet resonances is performed using 2.2 fb$^{-1}$ of proton-proton collision data at $\sqrt{s}$ = 7 TeV recorded by the CMS detector at CERN. The study is based on the dijet angular ratio, the ratio of the number of events with the two leading jets having pseudorapidity difference |delta eta| < 1.3 to the number of events with 1.3 < |delta eta| < 3.0. Models of new resonances which decay into two jets typically predict dijet angular distributions and hence, values of the dijet angular ratio which differ from standard model processes. We thus use the measurement of the angular ratio as a function of mass to set limits on the cross sections of new spin -1/2 quark-gluon resonances. We exclude excited quarks of mass less than 3.2 TeV at 95% confidence level, where a limit of 2.8 TeV is expected.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Interim Report on Mixing During the Casting of LEU-10Mo Plates in the Triple Plate Molds

LEU-10%Mo castings are commonly produced by down blending unalloyed HEU with a DU-12.7%Mo master-alloy. This work uses process modeling to provide insight into the mixing of the unalloyed uranium and U-Mo master alloy during melting and mold filling of a triple plate casting. Two different sets of situations are considered: (1) mixing during mold filling from a compositionally stratified crucible and (2) convective mixing of a compositionally stratified crucible during mold heating. The mold filling simulations are performed on the original Y-12 triple plate mold and the horizontal triple plate mold.

36 MATERIALS SCIENCE↗

Regenerative Carbonate-Based Thermochemical Energy Storage System for Concentrating Solar Power

Southern Research has developed a thermochemical energy storage (TCES) technology that utilizes the endothermic-exothermic reversible carbonation of calcium oxide (lime) to store thermal energy at high-temperatures, such as those achieved by next generation concentrating solar power (CSP) facilities. The major challenges addressed in the development of this system include refining a high capacity, yet durable sorbent material and designing a low thermal resistance low-cost heat exchanger reactor system to move heat between the sorbent and a heat transfer fluid under conditions relevant for CSP operation (e.g., energy density, reaction kinetics, heat flow). The proprietary stabilized sorbent was developed by Precision Combustion, Inc. (PCI). A factorial matrix of sorbent compositions covering the design space was tested using accelerated high throughput screening in a thermo-gravimetric analyzer. Several promising formulations were selected for more thorough evaluation and one formulation with high capacity (0.38 g CO 2 /g sorbent) and durability (>99.7% capacity retention over 100 cycles) was chosen as a basis for further development of the energy storage reactor system. In parallel with this effort, a full range of currently available commercial and developmental heat exchange reactor systems and sorbent loading methods were examined through literature research and contacts with commercial vendors. Process models were developed to examine if a heat exchange reactor system and balance of plant can meet required TCES performance and cost targets, optimizing tradeoffs between thermal performance, exergetic efficiency, and cost. Reactor types evaluated included many forms, from microchannel reactor, to diffusion bonded heat exchanger, to shell and tube heat exchangers. The most viable design for application to a supercritical CO 2 power cycle operating at 200-300 bar pressure and >700°C was determined to be a combination of a diffusion bonded heat exchanger with a shell and tube reactor. A bench scale reactor system was then designed and constructed to test sorbent performance under more commercially relevant conditions. This system utilizes a tube-in tube reactor design containing approximately 250 grams sorbent and is able to operate under a wide range of temperature, pressure and flow conditions as needed to explore system performance under a variety of operating conditions. A variety of sorbent loading methods may be tested using the reactor design. Initial bench test results over 25 cycles showed very high sorbent stability (>99%) and sufficient capacity (>0.28 g CO 2 /g sorbent) for an economical commercial-scale system. Initial technoeconomic evaluation of the proposed storage system show that the sorbent cost should not have a significant impact on overall system cost, and that the largest cost impacts come from the heat exchanger reactor and balance of plant equipment, including compressors and gas storage, due to the high temperatures for sCO 2 cycles. Current estimated system costs are $47/kWhth based on current material and equipment cost estimates.

14 SOLAR ENERGY↗

Searches for Bound Neutron-Antineutron Oscillation in Liquid Argon Time Projection Chambers

The next-generation Deep Underground Neutrino Experiment’s liquid argon detector represents an opportunity to probe previously unexplored parameter space for beyond-Standard Model processes. One such process is baryon number violating neutron-antineutron oscillation, the observation of which would have profound implications on our understanding of the origin of the matter-antimatter asymmetry in the universe, and provide strong hints as to the nature of neutrino mass. A GENIE n

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Identification of Residual Oil Zones in the Williston and Powder River Basins

The goal of this project by the Energy & Environmental Research Center was to systematically assess the petroleum systems of the Williston and Powder River Basins (PRB) for prospective residual oil zones (ROZs) through a geologic process modeling approach. This approach models the evolution of a sedimentary basin to predict if, when, and where reservoirs were charged with hydrocarbons. Suspected ROZs identified by this approach were evaluated for their potential oil recovery using carbon dioxide (CO 2 ) and for associated CO 2 storage. ROZs are naturally waterflooded portions of oil reservoirs with oil saturations between 25% and 40% but are at irreducible oil saturation levels with respect to water, rendering the reservoirs uneconomic using conventional recovery methods. However, using CO 2 enhanced oil recovery (EOR), substantial amounts of oil can be recovered from ROZs while simultaneously storing CO 2 . ROZs were originally identified and defined in the Permian Basin of West Texas but have since been identified or speculated in several geologic basins, including the Williston Basin and PRB.

54 ENVIRONMENTAL SCIENCES↗

Instrumentation Framework for Molten Salt Reactors

This report provides an overview of the specialized instrumentation necessary to operate and maintain liquid-fueled molten salt reactors (MSRs). The report does not include non-specialized industrial process control instrumentation, fissile material tracking instrumentation, or digital control/communication technologies. The report focuses on identifying MSR measurement technology gaps, and recommending research, development, and demonstration (RD&D) activities to close the identified gaps. To a large extent modern MSRs can rely on the instrumentation demonstrated during prior MSR development efforts. No fundamental technology gaps have been identified that would prevent operating or maintaining MSRs. However, improved instrumentation technology combined with the integration of modern process modeling and simulation could significantly improve the reliability and decrease the operating costs of future plants. The largest potential impact of new instrumentation technologies is in the integration of maintenance automation into reactor operations. Flow measurement has the largest technology hurdles remaining for to enable deployment of robust systems. Also, the technology for reliable, on-line fuel salt sample acquisition remains at relatively low technology readiness.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Large Scale Metal Additive Manufacturing with Wolf Robotics

Large Scale Metal Additive Manufacturing (LSMAM) is a new additive manufacturing (AM) technology based on the metal arc welding. A continuously fed metal wire is melted by an electric arc that forms between the wire and the substrate, and deposited in the form of a bead of molten metal along the predetermined path. Objects are manufactured one layer at a time starting from the base plate. The final properties of the manufactured object are dependent on its geometry and the metal deposition path, in addition to depending on the basic welding process parameters. The focus of the first phase of this two phase program was the installation, initial operation and development of processing parameters to demonstrate the ability to manufacture metal large scale parts. If successful, the second phase will focus on the development, and validation, of process models for the system.

42 ENGINEERING↗

Electron-Ion Dynamics with Time-Dependent Density Functional Theory: Towards Predictive Solar Cell Modeling

This project worked towards developing predictive and practical methods for electron-ion dynamics, to model processes involved in solar energy conversion for eventual use in the design of photovoltaic devices. The methods centered on time-dependent density functional theory (TDDFT) for electrons, with coupling to ions described based on the recently developed exactfactorization approach.

Maitra, Neepa T.↗

Calcined Waste Storage at the Idaho Nuclear Technology and Engineering Center

This comprehensive report provides definitive information regarding the volume, mass, and composition (chemical and radioactivity) of the calcined waste stored at the Idaho Nuclear Technology and Engineering Center on the Idaho National Laboratory Site. The calcine composition data are required for current regulatory compliance and safe operation of the INTEC’s six Calcined Solids Storage Facilities (CSSFs), as well as future retrieval, treatment, and shipping the calcine to an off-Site facility (such as a geologic repository). This report also contains a description of the calcine storage bins that compose each of the CSSFs, emphasizing the features that may be of concern to future calcine retrieval. The CSSFs were designed by different architectural engineering firms and built at different times. Each CSSF has a unique design, reflecting varying design criteria and lessons learned from historical CSSF operation. The varying CSSF designs will affect future calcine retrieval processes and equipment. This revision (5) of the report presents refinements of the databases used to calculate the volume, mass, chemical content, and radioactivity of calcined waste produced and stored within the CSSFs. This revision corrects minor errors and inconsistencies noted in an extensive validation and verification effort of the prior version of the Microsoft Excel workbooks upon which the calcine composition described in this report is based. Historical calcine samples are insufficient in number and scope of analysis to fully characterize the entire inventory of calcine in the CSSFs. Sample data exist for all of the liquid wastes that were calcined. This report provides calcine composition data based on liquid waste sample analyses, the volume of liquid waste calcined, calciner operating data, and CSSF operating data using several large Microsoft Excel (Microsoft 2010) databases and spreadsheets. The Excel spreadsheets are collectively called the Historical Processing Model (HPM). The calcine composition determined by this method compares favorably with historical calcine sample data.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Marcellus Shale Water Treatment at a WWTP

This unit process models the transport of water from a Marcellus Shale well to a WWTP (wastewater treatment plant) and subsequent treatment to remove water pollutants. To access the model referenced in the report, please visit https://www.netl.doe.gov/energy-analysis/details?id=587E41C0-0114-4C21-B051-B63CFABD4BEF

54 ENVIRONMENTAL SCIENCES↗

Marcellus Shale Water Treatment with Crystallization

This unit process models the transport and treatment of flowback water produced from the hydraulic fracturing of a natural gas well in the Marcellus Shale, with treatment via crystallization. To access the model referenced in the report, please visit https://www.netl.doe.gov/energy-analysis/details?id=A3C8334C-4AFB-45E1-8D08-D8CFD97882C1

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗