SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The International Space Station (ISS) Program has developed a safety review process to execute its responsibilities for the overall integrated safety of the ISS. This process will assess the design and operations of the ISS hardware/elements(including visiting vehicles during integrated ISS operations)and its ground support equipment in accordance with the applicable safety requirements as specified in Section2.0.
Chemical-free hydrothermal pretreatment of Miscanthus x giganteus (Mxg) at the lab scale using high liquid-to-solid ratios resulted in the recovery of anthocyanins and enhanced enzymatic digestibility of residual biomass. In this study, the process is scaled up by using a continuous hydrothermal pretreatment reactor operated at a low liquid-to-solid ratio (50 % w/w solids) as an important step towards commercialization. Anthocyanin yield was 70 % w/w at the pilot scale (50 kg of Mxg), compared to the 94 % w/w yield achieved at the lab scale (0.5 g of Mxg). The pretreated biomass was subsequently refined mechanically using a disc mill to increase the accessibility of cellulose by cellulases. Enzymatic saccharification of the pretreated and disc-milled residue yielded 238 g/L sugar concentration by operating in fed-batch mode at 50 % w/v solids content. Two strains of Rhodosporidium toruloides were evaluated for converting the hydrolysate sugars into microbial lipids, and strain Y-6987 had the highest lipid titer (11.0 g/L). Further, the residue left after enzymatic saccharification was determined to be enriched 1.7-fold in the lignin content. This lignin-rich residue has value as a feedstock for the production of sustainable aviation fuel precursors and other high-value lignin-based chemicals. Hence the proposed biorefinery based on Mxg creates an opportunity for generating revenue from multiple high-value products. As the demand for biofuels and biobased products is rising, the biorefinery products from Mxg would create a niche in the industrial sector.
Integrating diverse information sources and application software in a principled and general manner will require a very capable advanced information management (AIM) system. In particular, such a system will need a comprehensive addressing scheme to locate the material in its docuverse. It will also need a natural language processing (NLP) system of great sophistication. It seems that the NLP system must serve three functions. First, it provides an natural language interface (NLI) for the users. Second, it serves as the core component that understands and makes use of the real-world interpretations (RWIs) contained in the docuverse. Third, it enables the reasoning specialists (RSs) to arrive at conclusions that can be transformed into procedures that will satisfy the users' requests. The best candidate for an intelligent agent that can satisfactorily make use of RSs and transform documents (TDs) appears to be an object oriented data base (OODB). OODBs have, apparently, an inherent capacity to use the large numbers of RSs and TDs that will be required by an AIM system and an inherent capacity to use them in an effective way.
ABSTRACT Septins colocalize with membrane sterol-rich regions and facilitate recruitment of cell wall synthases during wall remodeling. We show that null mutants missing an Aspergillus nidulans core septin present in hexamers and octamers (ΔaspAcdc11, ΔaspBcdc3 or ΔaspCcdc12) are sensitive to multiple cell wall-disturbing agents that activate the cell wall integrity MAPK pathway. The null mutant missing the octamer-exclusive core septin (ΔaspDcdc10) showed similar sensitivity, but only to a single cell wall-disturbing agent and the null mutant missing the noncore septin (ΔaspE) showed only very mild sensitivity to a different single agent. Core septin mutants showed changes in wall polysaccharide composition and chitin synthase localization. Mutants missing any of the five septins resisted ergosterol-disrupting agents. Hexamer mutants showed increased sensitivity to sphingolipid-disrupting agents. Core septins mislocalized after treatment with sphingolipid-disrupting agents, but not after ergosterol-disrupting agents. Our data suggest that the core septins are involved in cell wall integrity signaling, that all five septins are involved in monitoring ergosterol metabolism, that the hexamer septins are required for sphingolipid metabolism and that septins require sphingolipids to coordinate the cell wall integrity response.
In this paper, we present an integrated, end-to-end synthetic aperture radar (SAR) processing system that accepts data processing requests, submits processing jobs, performs quality analysis, delivers and archives processed data. This fully automated SAR processing system utilizes database and internet/intranet web technologies to allow external users to browse and submit data processing requests and receive processed data. It is a cost-effective way to manage a robust SAR processing and archival system. The integration of these functions has reduced operator errors and increased processor throughput dramatically.
The paper discusses the development process of the International Space Station Alpha (ISSA) Integrated Traffic Model which is a subsystem analyses tool utilized in the ISSA design analysis cycles. Fast-track prototyping of the detailed relationships between daily crew and station consumables, propellant needs, maintenance requirements, and crew rotation via spread sheets provides adequate bench marks to assess cargo vehicle design and performance characteristics.
The paper discusses the development process of the International Space Station Alpha (ISSA) Integrated Traffic Model which is a subsystem analyses tool utilized in the ISSA design analysis cycles. Fast-track prototyping of the detailed relationships between daily crew and station consumables, propellant needs, maintenance requirements and crew rotation via spread sheets provide adequate benchmarks to assess cargo vehicle design and performance characteristics.
This presentation describes the process of developing a spacecraft display system and integrated procedures.
The ATLAS collaboration defines methods, establishes procedures, and organises advisory groups to manage the publication processes of scientific papers, conference papers, and public notes. All stages are managed through web systems, computing programs, and tools that are designed and developed by the collaboration. A framework called FENCE is integrated into the CERN GitLab software repository, to automatically configure workspaces where each analysis can be documented by the analysis team and managed by the relevant coordinators. Continuous integration is used to guide the writers in applying consistent and correct formatting when preparing papers to be submitted to scientific journals. Additional software assures the correctness of other aspects of each paper, such as the lists of collaboration authors, funding agencies, and foundations. The framework and the workflow therein provide automatic and easy support to the researchers and facilitates each phase of the publication process, allowing authors to focus on the article contents. The framework and its integration with the most up to date and efficient tools has consequently provided a more professional and efficient automatized work environment to the whole collaboration.
The Workbench initiative was launched in FY-2017 within the Nuclear Energy Advanced Modeling and Simulation (NEAMS) Integration Product Line to facilitate the transition from conventional tools to high-fidelity tools. The Workbench provides a common user interface for model creation, real-time validation, execution, output processing, and visualization for integrated codes. The integration of the Argonne Reactor Computation (ARC) suite of codes into the NEAMS Workbench was initiated in FY-2017. The ARC codes contain both legacy codes like DIF3D and REBUS-3 that were developed with over 30 years of experience, and newer NEAMS additions like MC2-3, PERSENT and PROTEUS. The ARC integration into the NEAMS Workbench interface relies on the PyARC module which handles the pre- and post-processing of the native ARC codes input, and the runtime environment. The PyARC module together with the NEAMS Workbench interface are both released under Open Source Software licenses. In FY-2019, the effort focused on integrating the explicit assembly management logic of REBUS, the GAMSOR code for gamma heating transport, and of the NODAL solver of PROTEUS. Additional capabilities were also integrated in response to user requests, such as the assembly power peaking calculation and a 2D result plotting capability. For verification and demonstration purposes, the ARC codes were used through the Workbench for solving the Sodium-cooled Fast Reactor Uncertainty Analysis in Modelling (SFR-UAM) benchmark problems, including the newly proposed unit cells and ASTRID problem. Significant effort in FY-2019 focused on training new users from ANL, INL, NCSU, and Westinghouse. In particular, extensive training material was developed in the form of tutorials, including documentation, sample inputs, and associated presentations. The ARC codes are now actively used through the NEAMS Workbench by nuclear engineers at ANL, INL, NCSU, and Westinghouse, for LFR, MSR, micro-reactor, and SFR core design analyses. Future efforts will focus on adding new and existing modeling capabilities available with the ARC and NEAMS codes, training new users and supporting them to continue building user experience.
Directed beams of single oxygen atoms having kinetic energies between 1 and 5 eV used in anisotropic etching of oxygen-labile photoresist patterns on silicon wafers. Key step in manufacturing integrated circuits on semiconductor wafers. Damage to semiconductor material under photoresist layer reduced or eliminated. Method incorporated into lithographic processes for fabrication of integrated circuits.
State-of-the-art (SOA) carbon dioxide (CO2) reduction technology for the International Space Station produces methane as a byproduct. This methane is subsequently vented overboard. The associated loss of hydrogen ultimately reduces the mass of oxygen that can be recovered from CO2 in a closed-loop life support system. As an alternative to SOA CO2 reduction technology, NASA is exploring a Series-Bosch system capable of reducing CO2 with hydrogen to form water and solid carbon. This results in 100% theoretical recovery of oxygen from metabolic CO2. In the past, Bosch-based technology did not trade favorably against SOA technology due to a high power demand, low reaction efficiencies, concerns with carbon containment, and large resupply requirements necessary to replace expended catalyst cartridges. An alternative approach to Bosch technology, labeled "Series-Bosch," employs a new system design with optimized multi-stage reactors and a membrane-based separation and recycle capability. Multi-physics modeling of the first stage reactor, along with chemical process modeling of the integrated system, has resulted in a design with potential to trade significantly better than previous Bosch technology. The modeling process and resulting system architecture selection are discussed.
A suite of prototype sensors, software, and avionics developed within the NASA Autonomous precision Landing and Hazard Avoidance Technology (ALHAT) project were terrestrially demonstrated onboard the NASA Morpheus rocket-propelled Vertical Testbed (VTB) in 2014. The sensors included a LIDAR-based Hazard Detection System (HDS), a Navigation Doppler LIDAR (NDL) velocimeter, and a long-range Laser Altimeter (LAlt) that enable autonomous and safe precision landing of robotic or human vehicles on solid solar system bodies under varying terrain lighting conditions. The flight test campaign with the Morpheus vehicle involved a detailed integration and functional verification process, followed by tether testing and six successful free flights, including one night flight. The ALHAT sensor measurements were integrated into a common navigation solution through a specialized ALHAT Navigation filter that was employed in closed-loop flight testing within the Morpheus Guidance, Navigation and Control (GN&C) subsystem. Flight testing on Morpheus utilized ALHAT for safe landing site identification and ranking, followed by precise surface-relative navigation to the selected landing site. The successful autonomous, closed-loop flight demonstrations of the prototype ALHAT system have laid the foundation for the infusion of safe, precision landing capabilities into future planetary exploration missions.
Soil water content is a function of inputs from precipitation and outputs via evaporation, transpiration, lateral flow, and vertical percolation, and is sensitive to biogeochemical processes. As such, soils serve as an ideal integrator of atmospheric, hydrological, and biogeochemical processes affecting the water cycle. In addition, soil water retention capacity, infiltration rates, and hydraulic conductivity can buffer or exacerbate the effects of extreme precipitation events (e.g., flooding, runoff, subsurface transport, erosion, greenhouse gas emissions) and mitigate the impact of droughts and heat waves on land systems (e.g., fire, crop failure). However, integrating water cycle measurements spanning different land atmosphere compartments across scales is a fundamental barrier for numerical model predictability. A significant challenge is that each domain (soil, hydrology, biology, and atmosphere) typically collects different sets of data at different temporal and spatial frequencies/scales, and even different dimensionalities (2D vs 3D). To implement soil as an integrator of the water cycle in land models, we suggest that novel machine learning (ML) tools can be developed to effectively simulate complex landscapes across various domains and scales, extended to regions with sparse or no data. The ultimate goals are to improve predictive understanding of land-atmosphere interactions and to extend the predictability of current Earth System Models (ESMs) through better integration of hydrological and biogeochemical data. We envision a framework in which: (1) ML-aided data reconstructions enable the merger of data sources into a unified geospatial product; (2) automated detection techniques are used to improve the knowledge of complex soil processes and interactions; and (3) this knowledge is leveraged and incorporated into models through AI-based emulators to distinctly connect the land and atmospheric compartments of the water cycle in models.
The application of Human Factors Engineering (HFE) practices to the Human Machine Interface design and subsequent Verification and Validation (V and V) is a widely applied practice when talking about the design of complete control rooms or important control room modernizations, but not so often applied to the design of computerized operator support systems. In order to overcome the challenges faced on designing a Computerized Operation Support System (COSS) that meets the process efficiency requirements and integrates seemingly with hybrid plant operation concept, the involvement of a HFE team early in the COSS design and implementation process along with operation, Instrumentation and Control (I and C) and cybersecurity experts will guarantee the project success. This paper documents the HFE process applied during the design and evaluation of a Computerized Procedure System (CPS) and how final product was shaped to ensure that the transition from paper to computerized procedures will help in meeting Delivering the Nuclear Promise (DNP) goals, improving plant efficiency. The HFE program included the following activities: 1. A review of existing operating experience 2. An analysis of functions and tasks associated to the use and maintenance of CPS 3. A design verification of the system to meet guidelines prescribed in the NUREG-0700 (Rev.2), requirements of the ISG-05 and cybersecurity criteria (NEI 08-09, IEC-62646, EPRI 1015313, these among others). 4. An integrated system validation in a full scope simulator The application of HFE practices in the design and implementation of COSS helps not only to ensure that efficiency and safety improvement requirements are met, but also to evaluate the potential return of the investment, that such tools should bring. (authors)
As a critical part of the NEXT test validation process, a multiple-string integration test was performed on the NEXT propellant management system and ion thrusters. The objectives of this test were to verify that the PMS is capable of providing stable flow control to multiple thrusters operating over the NEXT system throttling range and to demonstrate to potential users that the NEXT PMS is ready for transition to flight. A test plan was developed for the sub-system integration test for verification of PMS and thruster system performance and functionality requirements. Propellant management system calibrations were checked during the single and multi-thruster testing. The low pressure assembly total flow rates to the thruster(s) were within 1.4 percent of the calibrated support equipment flow rates. The inlet pressures to the main, cathode, and neutralizer ports of Thruster PM1R were measured as the PMS operated in 1-thruster, 2-thruster, and 3-thruster configurations. It was found that the inlet pressures to Thruster PM1R for 2-thruster and 3-thruster operation as well as single thruster operation with the PMS compare very favorably indicating that flow rates to Thruster PM1R were similar in all cases. Characterizations of discharge losses, accelerator grid current, and neutralizer performance were performed as more operating thrusters were added to the PMS. There were no variations in these parameters as thrusters were throttled and single and multiple thruster operations were conducted. The propellant management system power consumption was at a fixed voltage to the DCIU and a fixed thermal throttle temperature of 75 C. The total power consumed by the PMS was 10.0, 17.9, and 25.2 W, respectively, for single, 2-thruster, and 3-thruster operation with the PMS. These sub-system integration tests of the PMS, the DCIU Simulator, and multiple thrusters addressed, in part, the NEXT PMS and propulsion system performance and functionality requirements.
The AIRSAR automated, Web-based data processing and distribution system is an integrated, end-to-end synthetic aperture radar (SAR) processing system. Designed to function under limited resources and rigorous demands, AIRSAR eliminates operational errors and provides for paperless archiving. Also, it provides a yearly tune-up of the processor on flight missions, as well as quality assurance with new radar modes and anomalous data compensation. The software fully integrates a Web-based SAR data-user request subsystem, a data processing system to automatically generate co-registered multi-frequency images from both polarimetric and interferometric data collection modes in 80/40/20 MHz bandwidth, an automated verification quality assurance subsystem, and an automatic data distribution system for use in the remote-sensor community. Features include Survey Automation Processing in which the software can automatically generate a quick-look image from an entire 90-GB SAR raw data 32-MB/s tape overnight without operator intervention. Also, the software allows product ordering and distribution via a Web-based user request system. To make AIRSAR more user friendly, it has been designed to let users search by entering the desired mission flight line (Missions Searching), or to search for any mission flight line by entering the desired latitude and longitude (Map Searching). For precision image automation processing, the software generates the products according to each data processing request stored in the database via a Queue management system. Users are able to have automatic generation of coregistered multi-frequency images as the software generates polarimetric and/or interferometric SAR data processing in ground and/or slant projection according to user processing requests for one of the 12 radar modes.
The Department of Energy Atmosphere to Electrons (A2e) initiative has undertaken an experimental planning process for a validation directed program and an experimental planning process directed at improving simulations of wind plant performance. The validation process has been divided into two main sections: Integrated Program Planning, and Integrated Experiment and Model Planning and Execution. This document covers the Integrated Program Planning process in detail as it has been applied to the validation and assessment of models of various fidelity to predict wind plant performance. Three main parts of this process are presented in this document: the Phenomenon Identification and Ranking Table, the Validation Hierarchy, and the Prioritized Phenomenon and Experiment Mapping table. The document concludes with a description of validation program process next steps, which includes the planning and execution of integrated experiment and model campaigns