Search NASA⌕ Search

SEARCH · Search NASA

Results for “START Program”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,783 records · Page 99

Autonomous power expert system

The goal of the Autonomous Power System (APS) program is to develop and apply intelligent problem solving and control technologies to the Space Station Freedom Electrical Power Systems (SSF/EPS). The objectives of the program are to establish artificial intelligence/expert system technology paths, to create knowledge based tools with advanced human-operator interfaces, and to integrate and interface knowledge-based and conventional control schemes. This program is being developed at the NASA-Lewis. The APS Brassboard represents a subset of a 20 KHz Space Station Power Management And Distribution (PMAD) testbed. A distributed control scheme is used to manage multiple levels of computers and switchgear. The brassboard is comprised of a set of intelligent switchgear used to effectively switch power from the sources to the loads. The Autonomous Power Expert System (APEX) portion of the APS program integrates a knowledge based fault diagnostic system, a power resource scheduler, and an interface to the APS Brassboard. The system includes knowledge bases for system diagnostics, fault detection and isolation, and recommended actions. The scheduler autonomously assigns start times to the attached loads based on temporal and power constraints. The scheduler is able to work in a near real time environment for both scheduling and dynamic replanning.

Ringer, Mark J.↗

Autonomous power expert system

The goal of the Autonomous Power System (APS) program is to develop and apply intelligent problem solving and control technologies to the Space Station Freedom Electrical Power Systems (SSF/EPS). The objectives of the program are to establish artificial intelligence/expert system technology paths, to create knowledge based tools with advanced human-operator interfaces, and to integrate and interface knowledge-based and conventional control schemes. This program is being developed at the NASA-Lewis. The APS Brassboard represents a subset of a 20 KHz Space Station Power Management And Distribution (PMAD) testbed. A distributed control scheme is used to manage multiple levels of computers and switchgear. The brassboard is comprised of a set of intelligent switchgear used to effectively switch power from the sources to the loads. The Autonomous Power Expert System (APEX) portion of the APS program integrates a knowledge based fault diagnostic system, a power resource scheduler, and an interface to the APS Brassboard. The system includes knowledge bases for system diagnostics, fault detection and isolation, and recommended actions. The scheduler autonomously assigns start times to the attached loads based on temporal and power constraints. The scheduler is able to work in a near real time environment for both scheduling an dynamic replanning.

Ringer, Mark J.↗

NSPWG-recommended safety requirements and guidelines for SEI nuclear propulsion

An interagency Nuclear Safety Policy Working Group (NSPWG) was chartered to recommend nuclear safety policy, requirements, and guidelines for the Space Exploration Initiative (SEI) nuclear propulsion program to facilitate the implementation of mission planning and conceptual design studies. The NSPWG developed a top-level policy to provide the guiding principles for the development and implementation of the nuclear propulsion safety program and the development of safety functional requirements. In addition, the NSPWG reviewed safety issues for nuclear propulsion and recommended top-level safety requirements and guidelines to address these issues. Safety requirements were developed for reactor start-up, inadvertent criticality, radiological release and exposure, disposal, entry, and safeguards. Guidelines were recommended for risk/reliability, operational safety, flight trajectory and mission abort, space debris and meteoroids, and ground test safety. In this paper the specific requirements and guidelines will be discussed.

Marshall, Albert C.↗

Locating buildings in aerial photos

Algorithms and techniques for use in the identification and location of large buildings in digitized copies of aerial photographs are developed and tested. The building data would be used in the simulation of objects located in the vicinity of an airport that may be detected by aircraft radar. Two distinct approaches are considered. Most building footprints are rectangular in form. The first approach studied is to search for right-angled corners that characterize rectangular objects and then to connect these corners to complete the building. This problem is difficult because many nonbuilding objects, such as street corners, parking lots, and ballparks often have well defined corners which are often difficult to distinguish from rooftops. Furthermore, rooftops come in a number of shapes, sizes, shadings, and textures which also limit the discrimination task. The strategy used linear sequences of different samples to detect straight edge segments at multiple angles and to determine when these segments meet at approximately right-angles with respect to each other. This technique is effective in locating corners. The test image used has a fairly rectangular block pattern oriented about thirty degrees clockwise from a vertical alignment, and the overall measurement data reflect this. However, this technique does not discriminate between buildings and other objects at an operationally suitable rate. In addition, since multiple paths are tested for each image pixel, this is a time consuming task. The process can be speeded up by preprocessing the image to locate the more optimal sampling paths. The second approach is to rely on a human operator to identify and select the building objects and then to have the computer determine the outline and location of the selected structures. When presented with a copy of a digitized aerial photograph, the operator uses a mouse and cursor to select a target building. After a button on the mouse is pressed, with the cursor fully within the perimeter of the building, the program scans from the position of the cursor to a perimeter position where a shift in grayscale is detected. Once at the perimeter, the process traces along it, around the building, until it eventually returns to the perimeter starting point. Spatial resolution limits cause the perimeter trace to be somewhat course so that a line straightening algorithm is employed. One result is that the building corner positions become more distinctly defined.

Green, James S.↗

Optimized System Identification

In system identification, one usually cares most about finding a model whose outputs are as close as possible to the true system outputs when the same input is applied to both. However, most system identification algorithms do not minimize this output error. Often they minimize model equation error instead, as in typical least-squares fits using a finite-difference model, and it is seen here that this distinction is significant. Here, we develop a set of system identification algorithms that minimize output error for multi-input/multi-output and multi-input/single-output systems. This is done with sequential quadratic programming iterations on the nonlinear least-squares problems, with an eigendecomposition to handle indefinite second partials. This optimization minimizes a nonlinear function of many variables, and hence can converge to local minima. To handle this problem, we start the iterations from the OKID (Observer/Kalman Identification) algorithm result. Not only has OKID proved very effective in practice, it minimizes an output error of an observer which has the property that as the data set gets large, it converges to minimizing the criterion of interest here. Hence, it is a particularly good starting point for the nonlinear iterations here. Examples show that the methods developed here eliminate the bias that is often observed using any system identification methods of either over-estimating or under-estimating the damping of vibration modes in lightly damped structures.

Juang, Jer-Nan↗

Status of Nozzle Aerodynamic Technology at MSFC

This viewgraph presentation provides information on the status of nozzle aerodynamic technology at MSFC (Marshall Space Flight Center). The objectives of this presentation were to provide insight into MSFC in-house nozzle aerodynamic technology, design, analysis, and testing. Under CDDF (Center Director's Discretionary Fund), 'Altitude Compensating Nozzle Technology', are the following tasks: Development of in-house ACN (Altitude Compensating Nozzle) aerodynamic design capability; Building in-house experience for all aspects of ACN via End-to-End Nozzle Test Program; Obtaining Experimental Data for Annular Aerospike: Thrust eta, TVC (thrust vector control) capability and surface pressures. To support selection/optimization of future Launch Vehicle propulsion we needed a parametric design and performance tool for ACN. We chose to start with the ACN Aerospike Nozzles.

Ruf, Joseph H.↗

An Approach for Performance Assessments of Extravehicular Activity Gloves

The Space Suit Assembly (SSA) Development Team at NASA Johnson Space Center has invested heavily in the advancement of rear‐entry planetary exploration suit design but largely deferred development of extravehicular activity (EVA) glove designs, and accepted the risk of using the current flight gloves, Phase VI, for unique mission scenarios outside the Space Shuttle and International Space Station (ISS) Program realm of experience. However, as design reference missions mature, the risks of using heritage hardware have highlighted the need for developing robust new glove technologies. To address the technology gap, the NASA Game‐Changing Technology group provided start‐up funding for the High Performance EVA Glove (HPEG) Project in the spring of 2012. The overarching goal of the HPEG Project is to develop a robust glove design that increases human performance during EVA and creates pathway for future implementation of emergent technologies, with specific aims of increasing pressurized mobility to 60% of barehanded capability, increasing the durability by 100%, and decreasing the potential of gloves to cause injury during use. The HPEG Project focused initial efforts on identifying potential new technologies and benchmarking the performance of current state of the art gloves to identify trends in design and fit leading to establish standards and metrics against which emerging technologies can be assessed at both the component and assembly levels. The first of the benchmarking tests evaluated the quantitative mobility performance and subjective fit of two sets of prototype EVA gloves developed ILC Dover and David Clark Company as compared to the Phase VI. Both companies were asked to design and fabricate gloves to the same set of NASA provided hand measurements (which corresponded to a single size of Phase Vi glove) and focus their efforts on improving mobility in the metacarpal phalangeal and carpometacarpal joints. Four test subjects representing the design‐to hand anthropometry completed range of motion, grip/pinch strength, dexterity, and fit evaluations for each glove design in pressurized conditions, with and without thermal micrometeoroid garments (TMG) installed. This paper provides a detailed description of hardware and test methodologies used and lessons learned.

Aitchison, Lindsay↗

Offsite Source Recovery Program; High Activity Beta Gamma Removal, Transport and Disposition - 19663

The Department of Energy's (DOE) National Nuclear Security Administration's (NNSA) Office of Radiological Security's (ORS) Off-Site Source Recovery Program (OSRP) has been tasked with the removal and disposition of radioactive sealed sources in the interest of national security and public health and safety. It is the mission of the program to recover radioactive sources to prevent them from falling into the hands of individuals who would use this material for malicious intent. OSRP is a collaborative effort involving Los Alamos National Laboratory (LANL), Idaho National Laboratory (INL), and Lawrence Livermore National Laboratory (LLNL). At the inception of the program, Pu-239 was the only isotope acceptable for recovery. As a wider security scope developed, OSRP expanded its mission to include the recovery of other sources that posed a potential risk to national security, health, and safety. Starting in 2004, OSRP began recovering cesium and cobalt devices, largely from medical, research, and industrial facilities. These disused higher-activity devices present a burden to licensees in terms of security, and demand for OSRP's assistance in removing them has been high. Today, OSRP removes around 40 high-activity devices per year in support of domestic demand as well as ORS's Cesium Irradiator Replacement Project (CIRP). This represents an average of over 50,000 Ci of Cs-137 and Co-60 removed from the private sector each year for permanent disposition. A major component of this effort is the use of the proper shipping container to transport the devices. As a way to increase transportation capabilities ORS has developed two new Type B containers. The most recently completed of these containers, the 435-B, is currently certified to transport Gammators and Gammacell-1000, -3000, and -40 irradiators in an overpack configuration. This provides greater capacity and flexibility to safely and effectively transport these devices, for which acceptable shipping configurations had been previously limited. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Synergistic Development, Test, and Qualification Approaches for the Ares I and V Launch Vehicles

The U.S. National Aeronautics and Space Administration is designing and developing the Ares I and Ares V launch vehicles for access to the International Space Station (ISS) and human exploration of the Moon. The Ares I consists of a first stage reusable five-segment solid rocket booster, a upper stage using a J-2X engine derived from heritage experience (Saturn and Space Shuttle External Tank programs), and the Orion crew exploration vehicle (CEV). The Ares V is designed to minimize the development and overall life-cycle costs by leveraging off of the Ares I design. The Ares V consists of two boosters, a core stage, an earth departure stage (EDS), and a shroud. The core stage and EDS use LH2/LO2 propellants, metallic propellant tanks, and composite dry structures. The core stage has six RS-68B upgraded Delta IV engines while the EDS uses a J-2X engine for second stage ascent and trans-lunar injection (TLI) burn. System and propulsion tests and qualification approaches for Ares V elements are being considered as follow-on extensions of the Ares I development program. Following Ares I IOC, testing will be conducted to verify the J-2X engine's orbital restart and TLI burn capability. The Ares I upper stage operation will be demonstrated through integrated stage development and acceptance testing. The EDS will undergo similar development and acceptance testing with additional testing to verify aspects of cryogenic propellant management, operation of sub-systems in a space simulation environment, and orbital re-start of the main propulsion system. RS-68B certification testing will be conducted along with integrated core stage development and acceptance testing. Structural testing of the Ares V EDS and core stage propellant tanks will be conducted similar to the Ares I upper stage. The structural qualification testing may be accomplished with separate propellant tank test articles. Structural development and qualification testing of the dry structure will be pursued as part of the design and development process. Especially critical is the development test program for the composite structures. The Ares V payload shroud will undergo acoustic, vibration, structural qualification, and deployment testing in a space simulation environment. Similar to Ares I, requirements for full-scale structural dynamic testing are being studied. Both Ares I and Ares V include validation flight testing as part of the qualification programs.

Cockrell, Charles E.↗

Simulating Flights of Future Launch Vehicles and Spacecraft

Marshall Aerospace Vehicle Representation in C (MAVERIC) is a computer program for generic, low-to-high-fidelity simulation of the flight(s) of one or more launch vehicle(s) or spacecraft. MAVERIC is designed to accommodate multi-staged vehicles, powered serially or in parallel, with multiple engines, tanks, and cargo elements. Engines can be of jet or conventional rocket types, using either liquid or solid propellants. MAVERIC includes generic subsystem software models for propulsion systems, mass properties, reaction control systems, aerodynamic properties, guidance systems, and navigation systems. Simulations can be started at points other than liftoff. Also included are guidance-system software models that accommodate the ascent, orbit, coasting, deorbiting, entry, terminal-area-energy-management, approach, and landing phases of flight. Options to use different wind profiles and atmospheres are included. A Monte Carlo capability is provided for modeling dispersions associated with atmospheric effects (including winds), propulsion, navigation, aerodynamics, and mass properties. Failures of engines and other subsystems can be modeled. The program is written in the C programming language, which makes it possible for the program to have high degrees of modularity, reusability, and maintainability, thereby also facilitating modification for modeling new vehicles.

McCarter, James W.↗

One-step hydrothermal synthesis and characterization of V–Cr–O nanospheres and their excellent performance in the ammoxidation of 3,4- and 2,6-DCT

Graphical abstract: - Highlights: • V–Cr–O composite was synthesized by a facile one pot hydrothermal route. • The V–Cr–O composite has sphere-like morphology. • The as-obtained V–Cr–O composite has large specific surface area: 117 m{sup 2} g{sup −1}. • V–Cr–O complex was explored as the catalyst for the ammoxidation. - Abstract: Sphere-like V–Cr–O catalyst was successfully synthesized using V{sub 2}O{sub 5}, CrO{sub 3} and H{sub 2}C{sub 2}O{sub 4} solution as the starting materials by a facile one pot hydrothermal approach for the first time. The as-obtained samples were characterized by X-ray powder diffraction, X-ray photoelectron spectroscopy, energy dispersive X-ray spectrometer, hydrogen temperature programmed reduction, scanning electron microscopy and Brunauer–Emmett–Teller. The results indicated that V–Cr–O spheres with the diameter about 4 μm, consisted of lots of nanoparticles, were formed. The as-obtained V–Cr–O catalyst had large specific surface area: 117 m{sup 2} g{sup −1}. Furthermore, V–Cr–O complex was explored as the unsupported catalyst for the synthesis of 3,4- and 2,6-dichlorobenzonitrile by the ammoxidation of 3,4- and 2,6-dichlorotoluene. It was found that it had excellent performance in the ammoxidation reactions, specially, the catalytic temperature was decreased to about 320 °C, which was much lower than the previous reports (380–420 °C)

36 MATERIALS SCIENCE↗

Species-Selective Pyrimidineamine Inhibitors of Trypanosoma brucei S-Adenosylmethionine Decarboxylase

New therapeutic options are needed for treatment of human African trypanosomiasis (HAT) caused by protozoan parasite Trypanosoma brucei. S-Adenosylmethionine decarboxylase (AdoMetDC) is an essential enzyme in the polyamine pathway of T. brucei. Previous attempts to target this enzyme were thwarted by the lack of brain penetration of the most advanced series. In this study, we describe a T. brucei AdoMetDC inhibitor series based on a pyrimidineamine pharmacophore that we identified by target-based high-throughput screening. The pyrimidineamines showed selectivity for T. brucei AdoMetDC over the human enzyme, inhibited parasite growth in whole-cell assay, and had good predicted blood–brain barrier penetration. The medicinal chemistry program elucidated structure–activity relationships within the series. Features of the series that were required for binding were revealed by determining the X-ray crystal structure of TbAdoMetDC bound to one analog. The pyrimidineamine series provides a novel starting point for an anti-HAT lead optimization.

60 APPLIED LIFE SCIENCES↗

VERY LARGE ARRAY MONITORING OF 1720 MHz OH MASERS TOWARD THE GALACTIC CENTER

We present the first variability study of the 1720 MHz OH masers located in the Galactic center. Most of these masers are associated with the interaction between the supernova remnant Sgr A East and the interstellar medium, but a few masers are associated with the circumnuclear disk (CND). The monitoring program covered five epochs and a timescale of 20-195 days, during which no masers disappeared and no new masers appeared. All masers have previously been detected in a single-epoch observation about one year prior to the start of the monitoring experiment, implying relatively stable conditions for the 1720 MHz OH masers. No extreme variability was detected. The masers associated with the northeastern interaction region between the supernova remnant and the +50 km s{sup -1} molecular cloud show the highest level of variability. This can be explained with the +50 km s{sup -1} molecular cloud being located behind the supernova remnant and with a region of high OH absorbing column density along the line of sight. Possibly, the supernova remnant provides additional turbulence to the gas in this region, through which the maser emission must travel. The masers in the southern interaction region are located on the outermost edge of Sgr A East, the line of sight of which is not covered by either absorbing OH gas or a supernova remnant, in agreement with the much lower variability level observed. Similarly, the masers associated with the CND show little variability, consistent with those arising through collisions between relatively large clumps of gas in the CND and no significant amount of turbulent gas along the line of sight.

79 ASTRONOMY AND ASTROPHYSICS↗

RADIO MONITORING OF THE TIDAL DISRUPTION EVENT SWIFT J164449.3+573451. I. JET ENERGETICS AND THE PRISTINE PARSEC-SCALE ENVIRONMENT OF A SUPERMASSIVE BLACK HOLE

We present continued radio observations of the tidal disruption event Swift J164449.3+573451 extending to {delta}t Almost-Equal-To 216 days after discovery. The data were obtained with the EVLA, AMI Large Array, CARMA, the SMA, and the VLBA+Effelsberg as part of a long-term program to monitor the expansion and energy scale of the relativistic outflow, and to trace the parsec-scale environment around a previously dormant supermassive black hole (SMBH). The new observations reveal a significant change in the radio evolution starting at {delta}t Almost-Equal-To 1 month, with a brightening at all frequencies that requires an increase in the energy by about an order of magnitude, and an overall density profile around the SMBH of {rho}{proportional_to}r{sup -3/2} (0.1-1.2 pc) with a significant flattening at r Almost-Equal-To 0.4-0.6 pc. The increase in energy cannot be explained with continuous injection from an L{proportional_to}t{sup -5/3} tail, which is observed in the X-rays. Instead, we conclude that the relativistic jet was launched with a wide range of Lorentz factors, obeying E(> {Gamma}{sub j}){proportional_to}{Gamma}{sup -2.5}{sub j}. The similar ratios of duration to dynamical timescale for Sw 1644+57 and gamma-ray bursts (GRBs) suggest that this result may be applicable to GRB jets as well. The radial density profile may be indicative of Bondi accretion, with the inferred flattening at r {approx} 0.5 pc in good agreement with the Bondi radius for a {approx}few Multiplication-Sign 10{sup 6} M{sub Sun} black hole. The density at {approx}0.5 pc is about a factor of 30 times lower than inferred for the Milky Way Galactic Center, potentially due to a smaller number of mass-shedding massive stars. From our latest observations ({delta}t Almost-Equal-To 216 days) we find that the jet energy is E{sub j,iso} Almost-Equal-To 5 Multiplication-Sign 10{sup 53} erg (E{sub j} Almost-Equal-To 2.4 Multiplication-Sign 10{sup 51} erg for {theta}{sub j} = 0.1), the radius is r Almost-Equal-To 1.2 pc, the Lorentz factor is {Gamma}{sub j} Almost-Equal-To 2.2, the ambient density is n Almost-Equal-To 0.2 cm{sup -3}, and the projected angular size is r{sub proj} Almost-Equal-To 25 {mu}as, below the resolution of the VLBA+Effelsberg. Assuming no future changes in the observed evolution and a final integrated total energy of E{sub j} Almost-Equal-To 10{sup 52} erg, we predict that the radio emission from Sw 1644+57 should be detectable with the EVLA for several decades and will be resolvable with very long baseline interferometry in a few years.

79 ASTRONOMY AND ASTROPHYSICS↗

Three wide planetary-mass companions to FW Tau, ROXs 12, and ROXs 42B

We report the discovery of three planetary-mass companions (M = 6-20 M {sub Jup}) in wide orbits (ρ ∼ 150-300 AU) around the young stars FW Tau (Taurus-Auriga), ROXs 12 (Ophiuchus), and ROXs 42B (Ophiuchus). All three wide planetary-mass companions (PMCs) were reported as candidate companions in previous binary survey programs, but then were neglected for >10 yr. We therefore obtained followup observations that demonstrate that each candidate is comoving with its host star. Based on the absolute M{sub K{sup ′}} magnitudes, we infer masses (from hot-start evolutionary models) and projected separations of 10 ± 4 M {sub Jup} and 330 ± 30 AU for FW Tau b, 16 ± 4 M {sub Jup} and 210 ± 20 AU for ROXs 12, and 10 ± 4 M {sub Jup} and 140 ± 10 AU for ROXs 42B b. We also present similar observations for 10 other candidates that show that they are unassociated field stars, as well as multicolor JHK'L' near-infrared photometry for our new PMCs and for five previously identified substellar or planetary-mass companions. The near-infrared photometry for our sample of eight known and new companions generally parallels the properties of free-floating, low-mass brown dwarfs in these star-forming regions. However, five of the seven objects with M < 30 M {sub Jup} are redder in K' – L' than the distribution of young free-floating counterparts of similar J – K' color. We speculate that this distinction could indicate a structural difference in circumplanetary disks, perhaps tied to higher disk mass since at least two of the objects in our sample are known to be accreting more vigorously than typical free-floating counterparts.

79 ASTRONOMY AND ASTROPHYSICS↗

Direct-methods structure determination of a trypanosome RNA-editing substrate fragment with translational pseudosymmetry

Using direct methods starting from random phases, the crystal structure of a 32-base-pair RNA (675 non-H RNA atoms in the asymmetric unit) was determined using only the native diffraction data (resolution limit 1.05 Å) and the computer program SIR 2014. The almost three helical turns of the RNA in the asymmetric unit introduced partial or imperfect translational pseudosymmetry (TPS) that modulated the intensities when averaged by the l Miller indices but still escaped automated detection. Almost six times as many random phase sets had to be tested on average to reach a correct structure compared with a similar-sized RNA hairpin (27 nucleotides, 580 non-H RNA atoms) without TPS. Lastly, more sensitive methods are needed for the automated detection of partial TPS.

59 BASIC BIOLOGICAL SCIENCES↗

Semiglobal Safety-Filtered Extremum Seeking With Unknown CBFs

We introduce a safe extremum-seeking (Safe ES) algorithm which achieves the minimization of an unknown objective function while ensuring that an unknown, yet measured, control barrier function (CBF) remains above an arbitrarily small negative value for all time. In other words, “practical safety” is maintained during the entire period of convergence to the constrained extremum. Our design is based on quadratic program (QP) CBF style filters for safety, which is applied in an average and estimated sense. Using nonsmooth analysis tools, we guarantee semiglobal practical asymptotic (SPA) stability of the global constrained optimum, practical convergence to the safe set if starting in a condition violating the CBF, and practical safety for all time—semiglobally—if starting in safe set. The safety result of the paper is analogous with modern notions of SPA stability, guaranteeing that, for any small violation of safety, there exist design coefficients which guarantee that such a small violation is not exceeded. The paper outlines a set of sufficient conditions on the barrier and objective functions, and by way of a Lyapunov argument, we demonstrate that nonconvex constrained optimization problems can be solved. We present these results in the setting of a static map and a dynamical system. A simulation example illustrates the results.

97 MATHEMATICS AND COMPUTING↗

Uncertainty quantification of US Southwest climate from IPCC projections.

The Intergovernmental Panel on Climate Change (IPCC) Fourth Assessment Report (AR4) made extensive use of coordinated simulations by 18 international modeling groups using a variety of coupled general circulation models (GCMs) with different numerics, algorithms, resolutions, physics models, and parameterizations. These simulations span the 20th century and provide forecasts for various carbon emissions scenarios in the 21st century. All the output from this panoply of models is made available to researchers on an archive maintained by the Program for Climate Model Diagnosis and Intercomparison (PCMDI) at LLNL. I have downloaded this data and completed the first steps toward a statistical analysis of these ensembles for the US Southwest. This constitutes the final report for a late start LDRD project. Complete analysis will be the subject of a forthcoming report.

54 ENVIRONMENTAL SCIENCES↗