Search NASA⌕ Search

SEARCH · Search NASA

Results for “Solar Arrays”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,783 records · Page 99

Investigation of test methods, material properties and processes for solar cell encapsulants

Low cost encapsulation materials for the Flat Plate Solar Array Program (FSA) are investigated. The goal of the program is to identify, test, evaluate and recommend encapsulation materials and processes for the fabrication of cost effective and long life solar modules. Accelerated aging techniques for module component lifetime studies, investigation of candidate outer cover films and continued evaluation of soil repellant coatings are also included.

Willis, P. B.↗

Solar cell degradation in proton radiation orbits

Significant discrepancies have been observed between predicted and actual in-orbit silicon solar array degradation in orbits other than LEO (low Earth orbits) and GEO (geosynchronous orbit). These discrepancies have been diagnosed to arise probably from a combination of a lack of appropriate solar cell test data and from inadequacies in the models that relate the unidirectional and mono-energetic proton test data to the omnidirectional flux-energy spectra actually found in orbit. Relative damage coefficients and solar cell power outputs were discussed, and also were presented in graph form. Silicon and gallium arsenide solar cells were considered.

Rauschenbach, H. S.↗

Atomic oxygen effects on LDEF experiment AO171

The Solar Array Materials Passive Long Duration Exposure Facility (LDEF) Experiment (SAMPLE), AO171, contained in total approximately 100 materials and materials processes with a 300 specimen complement. With the exception of experiment solar cell and solar cell modules, all test specimens were weighed before flight, thus allowing an accurate determination of mass loss as a result of space exposure. Since almost all of the test specimens were thermal vacuum baked before flight, the mass loss sustained can be attributed principally to atomic oxygen attack. The atomic oxygen effects observed and measured in five classes of materials is documented. The atomic oxygen reactivity values generated for these materials are compared to those values derived for the same materials from exposures on short term shuttle flights. An assessment of the utility of predicting long term atomic oxygen effects from short term exposures is given. This experiment was located on Row 8 position A which allowed all experiment materials to be exposed to an atomic oxygen fluence of 6.93 x 10(exp 21) atoms/cm(sup 2) as a result of being positioned 38 degrees off the RAM direction.

Whitaker, Ann F.↗

An overview of the Solar, Anomalous, and Magnetospheric Particle Explorer (SAMPEX) mission

The scientific objective of the NASA Small-class Explorer Mission SAMPEX is summarized. A brief history of the Small Explorer program is provided along with a description of the SAMPEX project development and structure. The spacecraft and scientific instrument configuration is presented. The orbit of SAMPEX has an altitude of 520 by 670 km and an 82 deg inclination. Maximum possible power is provided by articulated solar arrays that point continuously toward the sun. Highly sensitive science instruments point generally toward the local zenith, especially over the terrestrial poles, in order to measure optimally the galactic and solar cosmic ray flux. Energetic magnetospheric particle precipitation is monitored at lower geomagnetic latitudes. The spacecraft uses several innovative approaches including an optical fiber bus, powerful onboard computers, and large solid state memories (instead of tape recorders). Spacecraft communication and data acquisition are discussed, and the space- and ground-segment data flows are summarized. A mission lifetime of 3 years is sought with the goal of extending data acquisition over an even longer portion of the 11-year solar activity cycle.

Baker, Daniel N.↗

Recent Progress on the Stretched Lens Array (SLA)

At the last Space Photovoltaic Research and Technology Conference, SPRAT XVII, held during the fateful week of 9/11/01, our team presented a paper on the early developments related to the new Stretched Lens Array (SLA), including its evolution from the successful SCARLET array on the NASA/JPL Deep Space 1 spacecraft. Within the past two years, the SLA team has made significant progress in the SLA technology, including the successful fabrication and testing of a complete four-panel prototype solar array wing (Fig. 1). The prototype wing verified the mechanical and structural design of the rigid-panel SLA approach, including multiple successful demonstrations of automatic wing deployment. One panel in the prototype wing included four fully functional photovoltaic receivers, employing triple-junction solar cells.

O'Neill, Markl↗

Maturing Rational Design Methodologies and Industry Consensus Engineering Standards: Critical Fastened Joints - Solar PV Industry

Critical structural joints can be seen throughout a solar array and are called upon to secure modules and keep racking assembled and able to resist large demands from winds and snow loads. In the relatively new and fast-growing solar PV industry, the important role these hardware assemblies (e.g. clips, clamps, bolts, nuts, washers) play is not well understood by product designers. Failures with critical structural joints are surprisingly common and point to the need for maturing the engineering and assembly of these joints. The wide variety of design concepts (Figure 2&2) demonstrate interesting and innovative ideas but are lacking the basics of fastener engineering seen in matured industries (e.g. transportation, buildings). Complicating the maturing process for critical structural joints is that they are one component in rack supporting structures that exhibits a systems behavior; each component will affect the other and play a key role in maintaining structural integrity. When wind loads the surface of a module, the underlying racking members deflect and twist which in turn imparts forces back into the joints and into the mounted modules. Often, these supporting rack structures exhibit high deflections and low natural frequencies which amplify the demands placed into the joints even in moderate winds. Current engineering practices and associated structural conventions view solar racking support structures as they would a high mass building that exhibit more static behaviors in wind events. Solar structures are unique from high mass buildings and require the development of solar specific industry engineering consensus standards.

14 SOLAR ENERGY↗

Computer program for design and performance analysis of navigation-aid power systems

The paper examines the requirements, design rationale, operation, and verification of a computer program designated as design synthesis/performance analysis (DSPA) computer program, which is capable of performing all the calculations necessary to understand the overall characteristics of solar array/battery power systems for navigation-aid applications. Despite the uncertainties in the erratic solar array degradation data and the potential impact on actual battery behavior, verification of the DSPA is considered successful. The program is shown to have the capability of simulating the performance of solar array/battery navigation-aid power systems. It can also be used to synthesize power system designs and provide essential design and cost data.

Weiner, H.↗

The application of solar thermoelectric generators in near-sun missions

Future planetary near-sun missions, such as those studied for low-altitude Mercury Orbiters, introduce challenges in the selection of appropriate power sources. Study results have shown that conventional silicon solar array technology is not adequate to produce power because of expected temperatures which range from -90 C to +285 C in about 40 to 50 minutes for 16 sun eclipses/day. The solar thermoelectric generator (STG), which requires relatively high temperatures, is being considered as a replacement power source. The complete STG consists of a solar concentrator and multiple thermopiles, each containing numerous thermocouples and thermal insulation material. Articulation of the STG design configurations is required at 0.45 AU to acquire maximum incident radiation and at 0.3 AU to reduce the higher incident radiation. STG thermal input to the spacecraft as it orbits Mercury (including sun eclipses) is insignificant.

Raag, V.↗

Large area silicon sheet by EFG

Work carried out on the JPL Flat Plate Solar Array Project, for the purpose of developing a method for silicon ribbon production by Edge-defined Film-fed Growth (EEG) for use as low-cost substrate material in terrestrial solar cell manufacture, is described. A multiple ribbon furnace unit that is designed to operate on a continuous basis for periods of at least one week, with melt replenishment and automatic ribbon width control, and to produce silicon sheet at a rate of one square meter per hour, was constructed. Program milestones set for single ribbon furnace operation to demonstrate basic EEG system capabilities with respect to growth speed, thickness and cell performance were achieved for 10 cm wide ribbon: steady-state growth at 4 cm/min and 200 micron thickness over periods of an hour and longer was made routine, and a small area cell efficiency of 13+% demonstrated. Large area cells of average efficiency of 10 to 11%, with peak values of 11 to 12% were also achieved. The integration of these individual performance levels into multiple ribbon furnace operation was not accomplished.

Kalejs, J. P.↗

Cell technology: Advanced silicon sheet

The Flat-plate Solar Array (FSA)-sponsored Fourth Silicon Stress/Strain Workshop reviewed, coordinated, and assessed the progress in understanding and controlling stress and strain during the crystal growth of silicon ribbons. dislocation electrical activity and limits on solar cell efficiency, and on studying the effects of dopants on EFG characteristics. Work on silicon for high-efficiency solar cells, stress-strain relationships in silicon ribbon, and high temperature deformation of dendritic web ribbon was also discussed.

Morrison, Andrew D.↗

Enabling bold mission initiatives - NASA space power technology

The critical technology requirements of space power for future NASA missions such as humans on Mars and the lunar base mission are reviewed, and ongoing research and technology efforts are discussed. Activities of the new Civil Space Technology Initiative will focus on photovoltaic and solar dynamic conversion system technologies with relevant electrical and thermal energy storage devices. Advanced solar array systems with specific powers of 300 W/kg are projected. The electrochemical energy storage goal is to improve the energy density by a factor of five up to 100 W h/kg, and the solar dynamic technology goal is to develop power systems with a specific power of 20 W/kg.

Gabris, Edward A.↗

A free-flying power plant for a manned space station

The 0.1 Hz fundamental structural frequency anticipated for the large solar array panels required to power manned space stations is close to the attitude control system bandwidth, and within the bandwidth of crew motion disturbances. Attention is presently given to a detachment of the solar panel system to create a free-flying powerplant for the space station, and to the control system that will maintain its attitude and position relative to the space station by means of thrusters that are supplied with space station state data by a laser/optical sensor system. Power transmission alternatives for this free-flying power system are discussed.

Paluszek, M.↗

The SAMPIE flight experimental final technical requirements document

The Solar Array Module Plasma Interactions Experiment (SAMPIE) is a shuttle based flight experiment scheduled for launch in early 1994. SAMPIE will investigate plasma interactions of high voltage space power systems in low earth orbit. Solar cell modules, representing several technologies, will be biased through a series of high voltages to characterize both arcing and plasma current collection. Other solar modules, specially modified in accordance with current theories of arcing and breakdown, will demonstrate the possibility of arc suppression. Finally, several test modules will be included to study the basic nature of these interactions. The science and technology goals for the project are defined in the Technical Requirements Document (TRD) which is presented here in its final form. The experiment is being developed at NASA LeRC in Cleveland, Ohio, and is sponsored by the NASA Office of Aeronautics and Space Technology (OAST).

Hillard, G. Barry↗

Development of a solar-cell dust opacity measurement instrument for Mars Pathfinder

The atmosphere of Mars has a considerable load of suspended dust. Over time, this dust is deposited out of the atmosphere. The mechanism and the temporal and geographical variation of this deposition are not well characterized. Measurements of settling rates and dust properties are of considerable scientific interest. Atmospheric dust affects the atmospheric solar absorption and thus the heat balance of Mars, as well as serving as nucleation sites for water and CO2 frost. Knowledge of dust properties is of critical interest to design and prediction of the lifetime and power output of solar arrays, and also to design of mechanical mechanisms and radiators. An instrument has been designed and fabricated to measure the dust accumulation during the course of the Mars Pathfinder rover mission. The solar-cell coverglass transmission experiment will measure the change in optical opacity of a transparent coverglass as dust settles on the surface, and a quartz crystal monitor will measure the mass deposited.

Geoffrey A. Landis↗

SPATIALLY AND SPECTRALLY RESOLVED OBSERVATIONS OF A ZEBRA PATTERN IN A SOLAR DECIMETRIC RADIO BURST

We present the first interferometric observation of a zebra-pattern radio burst with simultaneous high spectral ({approx}1 MHz) and high time (20 ms) resolution. The Frequency-Agile Solar Radiotelescope Subsystem Testbed (FST) and the Owens Valley Solar Array (OVSA) were used in parallel to observe the X1.5 flare on 2006 December 14. By using OVSA to calibrate the FST, the source position of the zebra pattern can be located on the solar disk. With the help of multi-wavelength observations and a nonlinear force-free field extrapolation, the zebra source is explored in relation to the magnetic field configuration. New constraints are placed on the source size and position as a function of frequency and time. We conclude that the zebra burst is consistent with a double-plasma resonance model in which the radio emission occurs in resonance layers where the upper-hybrid frequency is harmonically related to the electron cyclotron frequency in a coronal magnetic loop.

79 ASTRONOMY AND ASTROPHYSICS↗

Solar drum positioner mechanisms

The need for additional power on spinning satellites required development of deployable solar arrays activated, as on a 3-axis vehicle, after separation from a booster or shuttle orbiter. Mechanisms were developed for telescopically extending a secondary 36.3 kg (80 lb.), 2.13 m (84 in.) diameter spinning solar drum for a distance of 2.0 m (80 in.) or more along the spin axis. After extension, the system has the capability of dynamically controlling the drum tilt angle about the spin axis to provide precision in-orbit balancing of the spacecraft. This approach was selected for the SBS, ANIK C, ANIK D, WESTAR B and PALAPA B satellites. It was successfully demonstrated during the in orbit deployment of the aft solar panels of the SBS F-3 and F-1 satellites, subsequent to the November 1980 and September 1981 launches.

Briggs, L. W.↗

Technology and the Hubble Space Telescope

The components of the Hubble Space Telescope which is a 13.1 m long, 4.27 m in diameter, and weighs 11,000 kg are described. The telescope will be placed in a 600-km circular orbit of 28.5 deg inclination and it has an expected service life of 15 years. The optical telescope assembly contains the hyperbolic Ritchey-Chretin type primary and secondary mirrors and the optical control system. The telescope is to have a field of view of 28 arcmin in diameter. The use of the fine guidance sensors for pointing stability is examined. The optical and scientific system of the telescope are contained in the support system module. A wide-field/planetary camera, ESA-furnished faint object camera, the high-speed photometer, faint-object spectrograph, high resolution spectrograph, and ESA-furnished solar arrays are located on the telescope. The maintenance and refurbishment of the telescope are discussed. The precise lambda/20 optics, stringent cleanliness, and stable pointing of the telescope produce good image quality for astronomical and solar system science studies.

Mitchell, R. E.↗

LEO effects on candidate solar cell cover materials

The Long Duration Exposure Facility (LDEF) test samples discussed within are part of the Solar Array Materials Passive (SAMPLE) LDEF experiment, which included contributions from NASA and Jet Propulsion Lab (JPL). Only the JPL portion is described in this paper. The JPL test plate contains 30 individual thin silicon solar cell/cover samples. It was the intent of the experiment to evaluate the stability and protective capability of various cover materials such as conventional fused silica and potential alternative materials such as Teflon, silicone RTV's, glass resins, polyimides, and a copolymer encapsulate. Examination of the recovered experiment shows extensive physical changes have occurred. Approximately 150 micrometeoroid/debris impact were noted, some directly on the solar cells. Of particular interest are the results of ultraviolet and atomic oxygen interactions with the various cover materials. Initial results show that the fused silica cover is the most stable and protective, with performance of other materials varying widely. Electrical measurements of the cell/cover samples are presented as part of the evaluation of cover materials to protect cells in low earth orbit environments.

Stella, Paul M.↗