Search NASA⌕ Search

SEARCH · Search NASA

Results for “Spectroscopy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,783 records · Page 99
All sourcesNASA NTRSDOE OSTI
DOE OSTI2019

Optimized Substrates and Measurement Approaches for Raman Spectroscopy of Graphene Nanoribbons

The on-surface synthesis of graphene nanoribbons (GNRs) allows for the fabrication of atomically precise narrow GNRs. Despite their exceptional properties which can be tuned by ribbon width and edge structure, significant challenges remain for GNR processing and characterization. In this work, Raman spectroscopy is used to characterize different types of GNRs on their growth substrate and track their quality upon substrate transfer. A Raman-optimized (RO) device substrate and an optimized mapping approach are presented that allow for the acquisition of high-resolution Raman spectra, achieving enhancement factors as high as 120 with respect to signals measured on standard SiO 2 /Si substrates. This approach is well suited to routinely monitor the geometry-dependent low-frequency modes of GNRs. In particular, the radial breathing-like mode (RBLM) and the shear-like mode (SLM) for 5-, 7-, and 9-atom-wide armchair GNRs (AGNRs) are tracked and their frequencies are compared with first-principles calculations.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Exciton–Polaritons in CsPbBr 3 Crystals Revealed by Optical Reflectivity in High Magnetic Fields and Two-Photon Spectroscopy

Cesium lead bromide (CsPbBr3) is a representative material of the emerging class of lead halide perovskite semiconductors that possess remarkable optoelectronic properties. Its optical properties in the vicinity of the bandgap energy are greatly contributed by excitons, which form exciton polaritons due to strong light–matter interactions. Exciton–polaritons in solution-grown CsPbBr 3 crystals are examined by means of circularly polarized reflection spectroscopy measured in high magnetic fields up to 60 T. The excited 2P exciton state is measured by two-photon absorption. Comprehensive modeling and analysis provides detailed quantitative information about the exciton–polariton parameters: exciton binding energy of 32.5 meV, oscillator strength characterized by longitudinal–transverse splitting of 5.3 meV, damping of 6.7 meV, reduced exciton mass of 0.18$m$ 0 , exciton diamagnetic shift of 1.6 μeV T -2 , and exciton Landé factor $g$ x = + 2.35. It is shown that the exciton states can be described within a hydrogen-like model with an effective dielectric constant of 8.7. From the measured exciton longitudinal–transverse splitting, Kane energy of E p = 15 eV is evaluated, which is in reasonable agreement with values of 11.8–12.5 eV derived from the carrier effective masses.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

Electronic Structure of InAs and InSb Surfaces: Density Functional Theory and Angle-Resolved Photoemission Spectroscopy

The electronic structure of surfaces plays a key role in the properties of quantum devices. However, surfaces are also the most challenging to simulate and engineer. Here, in this work, the electronic structure of InAs(001), InAs(111), and InSb(110) surfaces is studied using a combination of density functional theory (DFT) and angle-resolved photoemission spectroscopy (ARPES). Large-scale first principles simulations are enabled by using DFT calculations with a machine-learned Hubbard U correction [npj Comput. Mater. 6, 180 (2020)]. To facilitate direct comparison with ARPES results, a “bulk unfolding” scheme is implemented by projecting the calculated band structure of a supercell surface slab model onto the bulk primitive cell. For all three surfaces, a good agreement is found between DFT calculations and ARPES. For InAs(001), the simulations clarify the effect of the surface reconstruction. Different reconstructions are found to produce distinctive surface states, which may be detected by ARPES with low photon energies. For InAs(111) and InSb(110), the simulations help elucidate the effect of oxidation. Owing to larger charge transfer from As to O than from Sb to O, oxidation of InAs(111) leads to significant band bending and produces an electron pocket, whereas oxidation of InSb(110) does not. The combined theoretical and experimental results may inform the design of quantum devices based on InAs and InSb semiconductors, for example, topological qubits utilizing the Majorana zero modes.

42 ENGINEERING↗
DOE OSTI2024

An Exact Expression for Multidimensional Spectroscopy of a Spin‐Boson Hamiltonian

Multidimensional coherent spectroscopy is a powerful tool to characterize nonlinear optical response functions. Typically, multidimensional spectra are interpreted via a perturbative framework that straightforwardly provides intuition into the density matrix dynamics that give rise to specific spectral features. When the goal is to characterize system coupling to a thermal bath however, the perturbative formalism becomes unwieldy and yields less intuition. Here, an approach developed by Vagov et al. is extended to provide an exact expression for multidimensional spectra of a spin-boson Hamiltonian up to arbitrary order of electric field interaction. Furthermore, the utility of this expression is demonstrated by modeling polaron formation and coherent exciton-phonon coupling in quantum dots, which strongly agree with experiment.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Fast redox switches lead to rapid transformation of goethite in humid tropical soils: A Mössbauer spectroscopy study

Abstract Humid tropical forest soils experience frequent rainfall, which limits oxygen diffusion and creates redox heterogeneity in upland soils. In this study we gauged the effect of short‐term anoxic conditions on Fe mineralogy of relatively Fe‐ and C‐rich surface soils (C/Fe mole ratio ∼5) from a humid tropical forest in Puerto Rico. Soils subjected to 4‐d oxic/anoxic oscillation were characterized by selective chemical extractions, Mössbauer spectroscopy (MBS), and X‐ray diffraction. Chemical extraction data suggested that rapidly switching redox conditions had subtle effects on bulk Fe mineralogy. Mössbauer, on the other hand, indicated that (a) the soil Fe is a mixture of goethites of varying characteristics with minor contributions from ferrihydrite (<5%) and Fe(III)‐organic matter (OM) phases (∼10%), and (b) anoxic conditions rapidly transformed all forms of goethite to relatively stable Fe oxides. Such fast changes in goethite features could be due to rapid depletion and sorption of bio‐released structural Al or sorbed OM onto residual soil components. The rapid temporal changes in MBS parameters and corresponding pore water nominal oxidation state of C values suggest that Fe‐C transformations in these upland tropical soils are complex and intricately coupled. A comprehensive understanding of the fate of Fe, Al, and OM (Fe‐organic moieties) during redox switches and concurrent changes in pore water chemistry is critical for development of robust transport models in humid tropical soils, which are subject to episodic low‐redox events.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Surface analysis insight note: X‐ray photoelectron spectroscopy analysis of battery electrodes—Challenges with nickel–manganese–cobalt and Li examples using an Al Kα x‐ray source

X‐ray photoelectron spectroscopy (XPS) has become a highly important tool for the analysis of battery materials and components. However, both anecdotal and detailed analysis of selected parts of the literature indicate that many reports of XPS on battery electrodes have significant analysis or data flaws. In this paper, we highlight several of the common challenges that analysts face when using XPS for battery materials, pointing to recent literature that addresses many of the critical issues associated with sample preparation as well as data collection and analysis. A common error for battery materials (and other materials) involves ignoring peak overlaps and interferences. Specifically, when a “minor” peak associated with a component in relatively high concentration overlaps or contributes to the primary peak (or one recommended for quantitative analysis) from a different element in the material. Overlap issues apply to many battery electrodes composed of many elements with complex photoelectron peak structures, as well as those involving peaks with seemingly simpler spectral envelopes such as Li and F. Examples of issues associated with battery systems are highlighted by a discussion of challenges associated with XPS analysis of Li and nickel–manganese–cobalt (NMC) electrodes in battery systems. Lithium analysis has challenges associated with the preparation and an often‐unrecognized peak overlap with F. In our laboratory and in the literature, NMC electrodes are often examined and new XPS users do not always recognize interference of the Auger signal from F KLL (in or on the electrode) with Ni 2p photoelectron spectrum when generated with Al Kα X‐rays. The use of simulated spectra involving both F and NiO demonstrates the extent of F Auger contributions to the Ni 2p signal strength as a function of the F/Ni atom ratio in the material and suggests spectra information that can be used to identify how significant effects will be on the resultant spectra. Our analysis demonstrates that in many cases overlap issues are significant for real electrode materials.

25 ENERGY STORAGE↗
DOE OSTI2024

Importance of standard terminology in surface chemical analysis: ISO 18115-1:2023, general terms and terms used in spectroscopy

The International Standard ISO 18115-1 on terminology in surface chemical analysis has been revised with clarifications, modifications, and deletions to more than 70 terms and with the addition of more than 50 terms in response to trends, issues, and needs identified by the surface analysis community. This revision adds terminology and concepts associated with emerging methods such as atom probe tomography, near ambient pressure XPS, and hard X-ray photoelectron spectroscopy. It includes 25 new and revised terms to ensure that the description of resolution is consistent across all surface analysis methods. The 630 terms in the document cover words or phrases used in describing the samples, instruments, and concepts involved in surface chemical analysis. Here, the terms have been collated into subject specific sections to ensure that related terms can be found easily.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Hollow Ptychography: Toward Simultaneous 4D Scanning Transmission Electron Microscopy and Electron Energy Loss Spectroscopy

With the recent development of high-acquisition-speed pixelated detectors, 4D scanning transmission electron microscopy (4D-STEM) is becoming routinely available in high-resolution electron microscopy. 4D-STEM acts as a “universal” method that provides local information on materials that is challenging to extract from bulk techniques. It extends conventional STEM imaging to include super-resolution techniques and to provide quantitative phase-based information, such as differential phase contrast, ptychography, or Bloch wave phase retrieval. However, an important missing factor is the chemical and bonding information provided by electron energy loss spectroscopy (EELS). 4D-STEM and EELS cannot currently be acquired simultaneously due to the overlapping geometry of the detectors. Here, the feasibility of modifying the detector geometry to overcome this challenge for bulk specimens is demonstrated, and the use of a partial or defective detector for ptycholgaphic structural imaging is explored. Here, results show that structural information beyond the diffraction-limit and chemical information from the material can be extracted together, resulting in simultaneous multi-modal measurements, adding the additional dimensions of spectral information to 4D datasets.

4D-scanning transmitting electron microscopy (STEM↗
DOE OSTI2022

Effect of second Si–O vibrational overtones/combinations on quantifying water in silicate and silica minerals using infrared spectroscopy, and an experimental method for its removal

Infrared spectroscopy (IR) is the most widely used analytical tool to quantify trace water in silicate and silica minerals. A prerequisite for highly accurate IR measurements of trace water is a good understanding of the effect of the second Si–O vibrational overtones/combination bands (2nd Si–O VOCBs) on the water peaks. Silicate and silica minerals can be divided as isolated (Q 0 ), paired (Q 1 ), ring (Q 2 ), chain (Q 1 or Q 2 ), sheet (Q 3 ) and framework (Q 4 ) structures according to the polymerization of their SiO 4 tetrahedral units, and the 2nd Si–O VOCBs of these different structural types attain different vibrational features which are expected to affect the water peaks to different extents. Here, we selected olivine (Q 0 ) and α-quartz (Q 4 ) as two endmember-like structural examples, performed extensive IR measurements on both pristine and heat-treated thin sections prepared for these two minerals, and explored the vibrational features of the 2nd Si–O VOCBs. In this work, we have found that the 2nd Si–O VOCBs are well separated from the water peaks in olivine, but severely overlap with the water peaks in α-quartz, confirming the different roles that the 2nd Si–O VOCBs play in quantifying trace water in silicate and silica minerals with different structural polymerizations. To remove the influence of the 2nd Si–O VOCBs (or any other species rather than water), an experimental protocol has been successfully developed, as approved by some fundamental equations and verified by the data of α-quartz in the literature. This development should lead to significant accuracy improvement in quantifying trace amounts of water in Earth and planetary materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

High pressure raman spectroscopy and X-ray diffraction of K2Ca(CO3)2 bütschliite: multiple pressure-induced phase transitions in a double carbonate

Abstract The crystal structure and bonding environment of K 2 Ca(CO 3 ) 2 bütschliite were probed under isothermal compression via Raman spectroscopy to 95 GPa and single crystal and powder X-ray diffraction to 12 and 68 GPa, respectively. A second order Birch-Murnaghan equation of state fit to the X-ray data yields a bulk modulus, $${K}_{0}=46.9$$ K 0 = 46.9 GPa with an imposed value of $${K}_{0}^{\prime}= 4$$ K 0 ′ = 4 for the ambient pressure phase. Compression of bütschliite is highly anisotropic, with contraction along the c -axis accounting for most of the volume change. Bütschliite undergoes a phase transition to a monoclinic C 2/ m structure at around 6 GPa, mirroring polymorphism within isostructural borates. A fit to the compression data of the monoclinic phase yields $${V}_{0}=322.2$$ V 0 = 322.2 Å 3 $$,$$ , $${K}_{0}=24.8$$ K 0 = 24.8 GPa and $${K}_{0}^{\prime}=4.0$$ K 0 ′ = 4.0 using a third order fit; the ability to access different compression mechanisms gives rise to a more compressible material than the low-pressure phase. In particular, compression of the C 2/ m phase involves interlayer displacement and twisting of the [CO 3 ] units, and an increase in coordination number of the K + ion. Three more phase transitions, at ~ 28, 34, and 37 GPa occur based on the Raman spectra and powder diffraction data: these give rise to new [CO 3 ] bonding environments within the structure.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Can {sup 1}H MR Spectroscopy be Used to Assess the Success of Uterine Artery Embolisation?

PurposeAbsence of contrast on contrast enhanced MRI (CEMRI) and reduction in uterine volume at 6 months post-uterine artery embolisation (UAE) currently indicate the successful disruption of the fibroid blood supply by UAE. This study assesses whether {sup 1}H MR spectroscopy ({sup 1}H MRS) can also indicate the success of UAE.Method20 patients with symptomatic fibroids were randomised 1:1 to undergo UAE with either Gelfoam or Embospheres. CEMRI and spectra (1.5 T) were acquired pre-, 24-h and 6 months post-UAE. LCModel was used to detect significant levels of choline, creatine and lactate in fibroid spectra. Uterine volumes were measured and paired t tests (p < 0.05) assessed volume reduction over time. Qualitative assessments of CEMRI were performed.ResultsCholine was detected in 17/18 spectra pre-UAE, 12/14 at 24-h and 6/16 at 6 months post-UAE. Choline was not detected in the 7/7 spectra available for the Embospheres group at 6 months. These fibroids were non-enhancing on CEMRI and associated with a significant reduction in mean uterine volume at 6 months (mean/min/max 396.5/84.1/997.5 cm{sup 3}, p = 0.003). Choline was detected in 6/9 fibroid spectra available for the Gelfoam group at 6 months. Of these fibroids, four demonstrated persistent enhancement on CEMRI and two were non-enhancing. This group did not demonstrate significant uterine volume reduction (mean/min/max 117.2/−230.6/382.6 cm{sup 3}, p = 0.15). The negative minimum value indicates fibroid growth.ConclusionsThis study has demonstrated the potential of {sup 1}H MRS to provide an additional marker of the success of UAE.

62 RADIOLOGY AND NUCLEAR MEDICINE↗
DOE OSTI2016

Synchrotron EXAFS and XANES spectroscopy studies of transition aluminas doped with La and Cr for catalytic applications

Abstract Transition aluminas doped with Cr find widespread application in the dehydrogenation industry, while La-stabilized transition aluminas are used extensively for high temperature application as catalytic supports. In this work, a detailed synchrotron XAFS-spectroscopy studies were conducted to shed light upon the atomic mechanisms of catalysis and/or catalytic support stabilization. It has been demonstrated that in the samples of different transition aluminas doped with Cr, the atoms of chromium are mostly in the state of oxidation Cr3+ and enter nanoparticles of Cr-bearing phases (Cr2O3 in the case of gamma- and –chi-alumina. In the row “gamma – chi – theta – eta-alumina” the change of properties (in particular, of the coloration of different samples) takes place because of dramatic reduction in the average size of Cr clusters and, possibly, their appearance on the Al2O3 surface. It has been also demonstrated that the substantial change in the local coordination of the La atoms in the samples of gamma-alumina doped with La, takes place only upon heating up to 1400°C, thereby making the La-stabilized gamma-alumina a perfect catalytic support for the numerous applications, e.g. catalytic three-way conversion of automobile exhaust gases. This change manifested itself in the form of increased La-O bond lengths and the La coordination number (from 8 to 12). It has been proved that the local environment of La in this new La-bearing phase cannot be explained in terms of the LaAlO3 formation. The absence of the La atoms in the second coordination sphere favors monoatomic distribution of La atoms on grain boundaries, proving that only very small amounts of this expensive rare earth material is required to achieve full stabilization. It is inferred that the tendency of La atoms to get surrounded by oxygen atoms, and also the impossibility of going into the bulk of alumina crystal, could be a major reason of the increased thermal stability of gamma alumina doped with lanthanum.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Calibration curves for commercial copper and aluminum alloys using handheld laser-induced breakdown spectroscopy

Handheld laser-induced breakdown spectroscopy (HH LIBS) was used to study the elemental composition of four copper alloys and four aluminum alloys to produce calibration curves. The HH LIBS instrument used is a SciAps Z-500, commercially available, that contains a class-1 solid-state laser with an output wavelength of 1532 nm, a laser energy of 5 mJ/pulse, and a pulse duration of 5 ns. Test samples were solid specimens comprising of copper and aluminum alloys and data were collected from the samples’ surface at three different locations, employing a 12-point-grid pattern for each data set. All three data sets of the spectra were averaged, and the intensity, corrected by subtraction of background, was used to produce the elemental calibration curves. Calibration curves are presented for the matrix elements, copper and aluminum, as well as several minor elements. The surface damage produced by the laser was examined by microscopy. The alloys were tested in air and in a glovebox to evaluate the instrument’s ability to identify the constituents within materials under different environmental conditions. The main objective of using this HH LIBS technology is to determine its capability to fingerprint the presence of certain elements related to subpercent level within materials in real time and in-situ, as a starting point for undertaking future complex material characterization work.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Infrared spectroscopy investigation of Fe-promoted Rh catalysts supported on Titania and Ceria for CO hydrogenation

The nature of the promotional effect of Fe addition to Rh/TiO 2 and Rh/CeO 2 catalysts for CO hydrogenation was investigated using FT-IR spectroscopy in an ultrahigh vacuum compatible transmission IR cell. CO adsorption experiments on Rh and FeRh showed vibrational signatures characteristic of linear and bridge bound CO on Rh0 as well as geminal-dicarbonyl species associated with Rh + . Compared to TiO 2 , the CeO 2 -supported catalysts show increased dispersion, reflected by decreased particle size, and a lower signal for linear versus geminal-dicarbonyl bonded CO. The absorption frequencies for CO on Rh/CeO 2 are also redshifted relative to Rh/TiO 2 , which results from a weaker Rh–CO interaction, likely due to the increased reducibility of the CeO 2 support. Upon addition of Fe, a new spectral feature is observed and attributed to CO bound to Rh in close contact with Fe, likely as a surface alloy. CO hydrogenation on (Fe)Rh catalysts on both supports was also studied. Compared to bare Rh, Fe containing catalysts promote formate and methoxy species on the surface at lower temperature (180 °C), which suggests an enhancement in methanol selectivity by Fe addition. Furthermore, at higher temperatures (220 °C), the spectral features appear similar, further confirming the role of Fe as a disrupter of large Rh o crystallites and regulator of CO dissociation and CH 4 formation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2017

Photochromism of Composite Organometallic Nanostructures Based on Diarylethenes. II. Vibrational Spectroscopy and Quantum Chemistry Studies

The structure and photochromic transformations of nanostructured organometallic composites consisting of Ag nanoparticles with shells of photochromic diarylethenes (DAEs) deposited from various solutions onto the nanoparticles were studied using infrared absorption and surface enhanced Raman scattering (SERS) vibrational spectroscopy and quantum chemistry. The studied nanostructures exhibited photochromic properties manifested as reversible photoinduced changes of the relative intensities of SERS bands related to vibrations of bonds participating in the reversible photoisomerization. Spectral manifestations of chemical interaction between metal nanoparticles and DAE molecules were detected.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2017

In situ Analysis of Fireworks Using Laser-Induced Breakdown Spectroscopy and Chemometrics

Different types of fireworks are analyzed using the laser-induced breakdown spectroscopy (LIBS) technique. The system employed for spectral acquisition consists of a Nd:YAG laser (532 nm, FWHM = 4 ns) and an Andor Mechelle ME 5000 echelle spectrometer. The presence of Ba, Ca, Mg, Fe, Na, Sr, Si, and Al is identified in the LIBS spectra of different fireworks. These elements can mix easily into the surroundings and thus pollute the environment. In combination with LIBS, multivariate statistical methods, such as principal component analysis and partial least square discriminant analysis, are employed for qualitative classification, regression, and prediction purposes. These methods show good applicability for the classification and prediction of a large data set.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2017

X-Ray Photoelectron Spectroscopy of Imidazolium Zwitterionic Salts: Comparison to Acetate Analogs and the Impact of the Alkyl Chain Length on the Charge Distribution

We investigate two imidazolium zwitterionic salts, 1,3-dimethylimidazolium-2-carboxylate and 1-butyl-3-methylimidazolium-2-carboxylate, together with 1-butyl-3-methylimidazolium acetate using X-ray photoelectron spectroscopy. The electronic environment of each element for the two zwitterionic salts is analyzed. Due to the electron-withdrawing effect of the imidazoliumcation, the binding energies of Ccarboxyl 1s and O 1s for zwitterionic salts are higher than those of 1-butyl-3-methylimidazolium acetate. The impact of the alkyl chain length on the charge distribution is also illustrated. It suggests that the electron-withdrawing effect of the imidazoliumcation decreases along with the increasing of the alkyl chain length.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Transversely Excited Atmospheric CO{sub 2} Laser-Induced Plasma Spectroscopy for the Detection of Heavy Metals in Soil

A rapid detection of heavy metals in soil was presented by the metal-assisted gas plasma method using specific characteristics of a pulsed, transversely excited atmospheric (TEA) CO{sub 2} laser. The soil particles were placed in a hole made of acrylic plate. The sample was covered by a to prevent the soil particles from being blown off. The mesh also functioned to initiate a luminous plasma. When a TEA CO{sub 2} laser (1500 mJ, 200 ns) was focused on the soil sample, passing through the metal mesh, some of the laser energy was used to generate the gas plasma on the mesh surface, and the remaining laser energy was employed to ablate the soil particles. The fine, ablated soil particles moved into the gas plasma region to be dissociated and excited. Using this technique, analysis can be made with reduced sample pretreatment, and therefore a rapid analysis can be performed efficiently. The results proved that the signal to noise ratio (S/N) of the emission spectral lines is much better for the case of the present method (mesh method) compared to the case of standard laser-induced breakdown spectroscopy using the pellet method. Rapid detection of heavy metal elements in soil has been successfully carried out. The detection limits of Cu and Hg in soil were estimated to be 3 and 10 mg/kg, respectively. The present method has good potential for rapid and sensitive detection of heavy metals in soil samples.

54 ENVIRONMENTAL SCIENCES↗