Search NASA⌕ Search

SEARCH · Search NASA

Results for “Understanding”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,783 records · Page 99
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Understanding the Benefit of Hybrid Electrolytes towards Vanadium Dissolution Suppression and Improved Capacity Retention in Zinc‐Aqueous Batteries Using NaV 3 O 8 Cathodes

Vanadate cathodes used in aqueous Zn-ion batteries with ZnSO 4 are hindered by capacity loss from V dissolution into the electrolyte. However, studies pinpointing the onset of dissolution as a function of electrochemical redox state and quantifying the amount of associated active material are lacking. To prevent dissolution of the NaV 3 O 8 active material, Na + ions are introduced into the electrolyte. Specifically, a hybrid ZnSO 4 + Na 2 SO 4 electrolyte is investigated in concert with NaV 3 O 8 (NVO) cathodes of varied crystallinity to determine the resulting impacts on cathode dissolution and functional electrochemistry. The use of Na + -containing hybrid electrolyte shows no significant change in Zn 2+ diffusion coefficients yet improved capacity retention. Time-resolved quantitative optical emission spectroscopy demonstrates the suppression of V dissolution with the hybrid electrolyte in both pristine and cycled electrodes. Operando synchrotron X-ray diffraction and absorption provide mechanistic insights. Hydrated NVO with wider interplanar spacing exhibits much higher H + /Zn 2+ capacity, while the Na 2 SO 4 mitigates the formation of irreversible side products. Furthermore, this study demonstrates that the use of hybrid electrolytes and control of crystallite size in the parent material can significantly improve electrochemical behavior of layered V-based cathodes in Zn-ion batteries, providing a general strategy toward safe and resilient aqueous battery systems.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Impacts of feedstock properties on the process economics of fast-pyrolysis biorefineries

Feedstock properties are an important factor affecting process yields and economics of fast pyrolysis biorefineries. Here, this study develops a fast pyrolysis process model sensitive to feedstock properties based on the experimental results. 64 simulations are run to evaluate the impacts of carbon, ash and moisture content in biomass feedstocks on process yields and energy consumptions. An economic analysis is conducted for each run to quantify process economics under different feedstock properties. With biomass feedstocks of 48% carbon and 15% moisture, Minimum Fuel Selling Price (MFSP) increases from 0.97/L to 1.06/L when ash content increases from 1% to 7%, due to reduced hydrocarbon yields. With biomass feedstocks of 48% carbon and 3% ash content, MFSP increases from 1.03/L to 1.08/L when feedstock moisture increases from 15% to 45% as a consequence of increased energy demand for feedstock drying. Finally, the impact of feedstock ash content decreases gradually as ash content increases. Feedstock carbon content has less significant impacts on process economics in this study.

09 BIOMASS FUELS↗
DOE OSTI2020

Understanding the Deactivation of Ag–ZrO 2 /SiO 2 Catalysts for the Single-step Conversion of Ethanol to Butenes

Ag–ZrO 2 /SBA-16 has recently been found to be efficient for catalyzing the single-step conversion of ethanol to butene (1- and 2-butene mixtures) in the presence of H 2 . The reaction proceeds via a cascading sequence of reactions over mixed metal and Lewis sites, with the catalyst composition tuned to selectively favor butene formation. However, the catalyst slowly deactivates when evaluated over long reaction times. Here, we evaluated the lifetime of the Ag–ZrO 2 /SBA-16 catalyst system for ethanol-to-butene conversion at 325 °C for up to 800 hours on stream. Several characterization techniques were used to elucidate the mechanism(s) by which catalyst deactivation occurs. Coke deposition, Ag particle sintering, and Ag 0 -to-Ag + oxidation state change were identified to be the major causes of catalyst deactivation. Coke deposits cover primarily Lewis acid sites which are responsible for aldol condensation, Meerwein-Ponndorf-Verley (MPV) reduction, and dehydration reactions. Ag particle sintering and Ag oxidation state change leads to a reduction in the number of metallic Ag sites responsible for the dehydrogenation/hydrogenation steps. The fresh catalyst likely experiences hydrothermal sintering in the early stage of reaction and permanently loses some active Lewis acid sites before reaching a new structural steady state. The deactivation of Lewis acid sites leads to a decrease in overall ethanol conversion, whereas the deactivation of the metallic Ag sites decreases the butene selectivity. For catalyst regeneration, oxidative calcination (at 500 °C) followed by reduction (at 325 °C) successfully removes all the coke species on the catalyst surface and restores the metallic Ag particles of the 4Ag–4ZrO 2 /SBA-16 catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Understanding Support Effects of ZnO-Promoted Co Catalysts for Syngas Conversion to Alcohols Using Atomic Layer Deposition

Co 2 C, an emerging catalyst for the conversion of syngas to oxygenates, shows support-sensitive behavior that has not yet been fully explained. In this work, we characterize Co catalysts modified with ZnO atomic layer deposition on SiO 2 , carbon, CeO 2 , and Al 2 O 3 supports. We find that under syngas conditions, ZnO-promoted Co transforms into Co 2 C on SiO 2 , carbon, and CeO 2 , but not on Al 2 O 3 . Moreover, the support affects the extent of carburization: while the SiO 2 -supported catalyst carburizes completely, carbon- and CeO 2 -supported catalysts show incomplete conversion of Co to Co 2 C. These three catalysts also exhibit different oxygenate selectivities. In contrast, the modified Al 2 O 3 -supported catalyst retains the Fischer-Tropsch catalytic properties of metallic Co. By depositing increasing amounts of Al 2 O 3 by ALD on the SiO 2 support, decreasing Co 2 C formation and oxygenate selectivity occurs. In-situ XANES reveals that Al 2 O 3 prevents Co 2 C formation by enabling the ZnO to restructure into ZnAl 2 O 4 during reduction. Thus, in addition to modifying the active catalyst phase, the promoter can also strongly interact with the support, significantly impacting catalyst performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Understanding Brønsted-Acid Catalyzed Monomolecular Reactions of Alkanes in Zeolite Pores by Combining Insights from Experiment and Theory

The front cover artwork is provided by Bell and co-workers. The image shows a butane molecule adsorbed at a Brønsted acid site inside the pores of zeolite H-MFI, surrounded by the products of monomolecular cracking and dehydrogenation reactions catalyzed by these sites. Read the full text of the Minireview at 10.1002/cphc.201701084.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Understanding the Photocatalytic Properties of Pt/CeO x /TiO 2 : Structural Effects on Electronic and Optical Properties

Ceria-titania interfaces play a crucial role in different chemical processes but are especially promising for the photocatalytic splitting of water using light in the visible wavelength region when Pt is added to the system. Yet, the complexity of this hierarchical structure hampers the study of the origin of its outstanding properties. In this article, the structural, electronic and optoelectronic properties of CeO 2 /TiO 2 systems containing 1D, 2D, and 3D particles of ceria are analyzed by means of density functional calculations. Adsorption sites and vacancy effects have been studied to model Pt adsorption. Density of states calculations and absorption spectra simulations explain the behavior of these systems. Conclusively, these models are used for the screening of other metals that can be combined with this heterostructure to possibly find more efficient water splitting photocatalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Understanding the Electronic and Structural Effects in ORR Intermediate Binding on Anion‐Substituted Zirconia Surfaces

Abstract For oxygen reduction reaction (ORR), the surface adsorption energies of O and OH* intermediates are key descriptors for catalytic activity. In this work, we investigate anion‐substituted zirconia catalyst surfaces and determine that adsorption energies of O and OH* intermediates is governed by both structural and electronic effects. When the adsorption energies are not influenced by the structural effects of the catalyst surface, they exhibit a linear correlation with integrated crystal orbital Hamiltonian population (ICOHP) of the adsorbate‐surface bond. The influence of structural effects, due to the re‐optimisation slab geometry after adsorption of intermediate species, leads to stronger adsorption of intermediates. Our calculations show that there is a change in the bond order to accommodate the incoming adsorbate species which leads to stronger adsorption when both structural and electronic effects influence the adsorption phenomena. The insights into the catalyst‐adsorbate interactions can guide the design of future ORR catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2017

Understanding the Changes to Biomass Surface Characteristics after Ammonia and Organosolv Pretreatments by Using Time-of-Flight Secondary-Ion Mass Spectrometry (TOF-SIMS)

Surface characteristic changes to poplar after ammonia and organosolv pretreatments were investigated by means of time-of-flight secondary-ion mass spectrometry (TOF-SIMS) analysis. Whereas normalized total polysaccharides and lignin contents on the surface differed from bulk chemical compositions, the surface cellulose ions detected by TOF-SIMS showed the same value trend as the cellulose content in the biomass. In addition, the lignin syringyl/guaiacyl ratio according to TOF-SIMS results showed the same trend as the ratio measured by means of NMR spectroscopic analysis, even though the ratio scales for each method were different. A similar correlation was determined between the surface cellulose and glucose release after enzymatic hydrolysis. Lastly, these results demonstrate that surface characterization using TOF-SIMS can provide important information about the effects of pretreatment on biomass properties and its hydrolysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2016

Understanding the interactions of CO 2 with doped and undoped SrTiO 3

SrTiO 3 and doped SrTiO 3 have a wide range of applications in different fields. For example, Rh-doped SrTiO 3 has been shown to have photocatalytic activity for both hydrogen production and CO 2 conversion. In this study, both undoped and Rh-doped SrTiO 3 were synthesized by hydrothermal and polymerizable complex methods. Different characterizations techniques including X-ray photoelectron spectroscopy (XPS), XRD, Raman, and UV/Vis spectroscopy were utilized to establish correlations between the preparation methods and the electronic/structural properties of Rh-doped SrTiO 3 . The presence of dopants and oxygen vacancies substantially influenced the CO 2 interactions with the surface, as revealed by the in situ infrared spectroscopic study. As a result, the presence of distinctly different adsorption sites was correlated to oxygen vacancies and oxidation states of Ti and Rh.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Understanding the Oxygen Reduction Reaction Activity and Oxidative Stability of Pt Supported on Nb-Doped TiO 2

Commercial fuel cell electrocatalyst degradation results from carbon electrocatalyst support oxidation at high operating potential transients. Guided by density functional theory (DFT) calculations, Nb-doped TiO 2 (NTO) was synthesized, which exhibits a unique combination of high surface area, high electrical conductivity, and high porosity. Here, this catalyst retained 78 % of its initial electrochemically active surface area compared with 57.6 % retained by Pt/C following the DOE/FCCJ protocol for accelerated stability test. Strong metal–support interactions, which were predicted by DFT calculations and confirmed experimentally by X-ray photoelectron spectroscopy and kinetics measurements, resulted in 21 % higher oxygen reduction reaction mass activity (at 0.9 V vs. reversible hydrogen electrode) on Pt/NTO compared with commercial Pt/C. The ex situ activity and durability of Pt/NTO translated to a fuel cell. The rise in electrode ohmic resistance and non-electrode concentration overpotential indicate that improving the conductivity of NTO and optimizing the catalyst ink formulation are critical next steps in the development of Pt/NTO-catalyzed proton exchange membrane fuel cells.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2025

When can we detect lianas from space? Toward a mechanistic understanding of liana‐infested forest optics

Abstract Lianas, woody vines acting as structural parasites of trees, have profound effects on the composition and structure of tropical forests, impacting tree growth, mortality, and forest succession. Remote sensing could offer a powerful tool for quantifying the scale of liana infestation, provided the availability of robust detection methods. We analyze the consistency and global geographic specificity of spectral signals—reflectance across wavelengths—from liana‐infested tree crowns and forest stands, examining the underlying mechanisms of these signals. We compiled a uniquely comprehensive database, including leaf reflectance spectra from 5424 leaves, fine‐scale airborne reflectance data from 999 liana‐infested canopies, and coarse‐scale satellite reflectance data covering 775 ha of liana‐infested forest stands. To unravel the mechanisms of the liana spectral signal, we applied mechanistic radiative transfer models across scales, establishing a synthesis of the relative importance of different mechanisms, which we corroborate with field data on liana leaf chemistry and canopy structure. We find a consistent liana spectral signal at canopy and stand scales across globally distributed sites. This signature mainly arises at the canopy level due to direct effects of more horizontal leaf angles, resulting in a larger projected leaf area, and indirect effects from increased light scattering in the near and short‐wave infrared regions, linked to lianas' less costly leaf construction compared with trees on average. The existence of a consistent global spectral signal for lianas suggests that large‐scale quantification of liana infestation is feasible. However, because the traits responsible for the liana canopy‐reflectance signal are not exclusive to lianas, accurate large‐scale detection requires rigorously validated remote sensing methods. Our models highlight challenges in automated detection, such as potential misidentification due to leaf phenology, tree life history, topography, and climate, especially where the scale of liana infestation is less than a single remote sensing pixel. The observed cross‐site patterns also prompt ecological questions about lianas' adaptive similarities in optical traits across environments, indicating possible convergent evolution due to shared constraints on leaf biochemical and structural traits.

Environmental Sciences & Ecology↗
DOE OSTI2024

Understanding Europium and Terbium Speciation and Ion Pairing in Carbonate Complexes Using Advanced Spectroscopy Techniques

Lanthanide (Ln) elements are critical materials that are typically extracted/mined together. Their separation by solvent extraction from acidic media is well known; however, there are few studies in basic media with carbonate anions. We investigated the complexation of Eu(III) and Tb(III) carbonates as solids and solutions in alkaline K2CO3, wherein we sought to access a Tb(IV) carbonate complex through ozonolysis. L3-edge XANES of Eu and Tb carbonate solids, colorless solutions, and a red-hued Tb solution (obtained by ozonolysis) all showed Ln(III) cations. The absence of evidence for a Tb(IV) complex was confirmed through XAS and EPR analyses, despite the solution exhibiting a deep red color. For solids and solutions, EXAFS results indicate molecular Ln(III)-carbonato anions. In terms of the Eu(III) carbonate coordination number, the coordination does not change upon dissolution of the solid sample. Furthermore, EXAFS for the solutions revealed evidence for the association of potassium cations with the Ln(III)-carbonato anions. Furthermore, this direct observation of contact ion pairing by EXAFS at room temperature is rare. The insights into Ln(III) carbonate complexation and solution speciation afforded by XANES-EXAFS, FT-IR, and EPR provides perspectives that serve as benchmarks for future computational and experimental efforts focused on caustic-side solvent extraction of Ln(III) ions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Understanding large‐scale, complex, human–environmental processes: a framework for social–ecological observatories

There is a growing consensus that transdisciplinary environmental networks are required to generate knowledge of the dynamics of coupled human–natural systems ( CHAN s) and to assess societal and policy consequences of complex environmental issues. Few of the existing large environmental observatory networks collect much, if any, data on the CHAN s coupling mechanisms, reaffirming the need to develop observing approaches and structures that address the interoperability of the diverse data being obtained from these systems. We review the characteristics of existing environmental observatories and similar initiatives used to monitor CHAN s, and identify opportunities for interoperability among them. From a synthesis of the characteristics of environmental networks representing a wide spectrum of research approaches and applications, a conceptual framework of a typical Social–Ecological Observatory ( SEO ) is presented to support long‐term, multi‐scaled CHAN s observations through a common set of principles for organizing the observatories. Finally, we identify three areas of emphasis where progress is needed to support the use and application of SEO s.

Bourgeron, Patrick↗
DOE OSTI2020

Understanding Life History Diversity of a Wild Steelhead Population and Managing for Resiliency

Abstract Diversity in steelhead Oncorhynchus mykiss (anadromous Rainbow Trout) is often characterized by varying time spent in freshwater and saltwater environments. However, ontogenetic shifts are not often highlighted as an important diversity characteristic in salmonids. Larger water bodies can play a key role in population stability by buffering limited resources in smaller tributary systems. Based on freshwater and saltwater ages of adult steelhead in Fish Creek, Idaho, there were 12 different life history trajectories observed. Juvenile abundance varied from 12,083 (SE = 1,225.7) to 62,463 (SE = 1,753.8), with ages ranging from young of the year (age 0) to 4 years. Adult abundance fluctuated from 17 (SE < 0.1) to 499 (SE = 67.1), and total age of adults varied from 3 to 7 years. Diversity was most evident in juvenile movement and rearing strategies. We observed four types of movement and rearing pathways in which juveniles either directly migrated to the ocean from Fish Creek or resided for up to three winters in main-stem river habitat in the Clearwater River basin prior to ocean migration. Most juveniles emigrated in the fall at age 2, and most ocean-emigrating smolts were age 3. Subsequently, most juveniles resided for at least one additional winter period before ocean migration. Juvenile diversity was also reflected in adult ages; the mean proportion that spent 3 years in freshwater was 0.55 (SE = 0.03), and the mean proportion that spent 2 years in freshwater was 0.41 (SE = 0.03). Adult sex ratio was female biased (mean ± SE = 0.66 ± 0.02), with a higher proportion of females (0.89 ± 0.03) than males (0.65 ± 0.05) residing in the ocean for at least 2 years. Density-dependent mechanisms were evident in juvenile rearing habitat in Fish Creek for cohorts of high female abundance. Population productivity potentials can be met when tributary and main-stem rearing habitat can be utilized, and this will be essential in attaining recovery goals.

Dobos, Marika E.↗
DOE OSTI2018

Potentials with small-angle neutron scattering technique for understanding structure-property relation of 3D-printed materials: SANS Investigation of 3D-Printed Materials

Carbon fiber (CF)-embedded acrylonitrile butadiene styrene polymer composites printed on the large-scale printer at Oak Ridge National Laboratory were investigated by small-angle neutron scattering to correlate the microstructure of the composites with their mechanical strength. The microstructure of the polymer domains and the alignment of CF were characterized across the interfaces among layers of the hot-melt extruded material and were compared with CF-free ABS. The small-angle neutron scattering data show that the CF-containing material displays strong anisotropic scatterings indicating molecular alignment along the printing direction that is not present in the CF-free ABS. Scattering data analysis across the interfacial layer revealed enhanced molecular alignment along the printing direction near the boundaries and inhomogeneous size distribution of polymer domains upon the addition of CF. We attribute the compromised strength across interfacial layers from CF-containing material to this inhomogeneous size distribution which inhibits effective lateral interaction between layers.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Understanding the effects of backbone chemistry and anion type on the structure and thermal behaviors of imidazolium polyimide‐ionenes

Abstract Advancements in the performance and properties of ionenes can be achieved via rational molecular design strategies which combine structural elements of ionic liquids (ILs) and high‐performance polymers. The use of imidazole‐amine molecules with asymmetric reactivity has enabled the synthesis of new bis(imidazole) diimide monomers which are then polymerized via the Menshutkin reaction, followed by anion exchange to various molecular species well known in the IL literature. In this work, three types of imidazolium polyimide‐ionene backbones were synthesized starting from 1‐(3‐aminopropyl)imidazole and pyromellitic dianhydride (PMDA) or 4,4′‐(hexafluoroisopropylidene)diphthalic anhydride (6FDA) or from 1‐(4‐aminophenyl)imidazole and 6FDA, with these monomers then reacted with para ‐dichloroxylene. The Cl − anions on the resultant ionenes were then exchanged with one of six molecular anions yielding a total of 18 distinct polymer compositions. The functional groups present within the cationic backbone as well as the anion type were observed to strongly influence both the thermal and organizational properties of these new ionenes. © 2019 Society of Chemical Industry

O'Harra, Kathryn E.↗