Search NASA⌕ Search

SEARCH · Search NASA

Results for “VAPOR PHASE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,783 records · Page 99

Model-informed, Adaptive Physical Vapor Deposition to Fabricate Hierarchical Binary-alloy Thin-films

Designing next generation thin films, tailor-made for specific applications, relies on the availability of robust processing-structure-property relationships. Traditional structure zone diagrams are limited to low-dimensional mappings, with machine-learning methods only recently attempting to relate multiple processing parameters to the final microstructure. Despite this progress, structure-processing relationships are unknown for processing conditions that vary during thin-film deposition, limiting the range of microstructures and properties achievable. In this project, we employed a phase-field computational model combined with a genetic algorithm (GA) to identify and design time-dependent processing protocols that achieve tailor-made microstructures. We simulate the physical vapor deposition of a binary-alloy thin film by employing a phase-field model, where deposition rates and diffusivities are controlled via the genetic algorithm. Our GA-guided protocols achieve targeted microstructures with lateral and vertical concentration modulations, as well as more complex, hierarchical microstructures previously not described in simple structure zone diagrams. Our algorithm provides insight to experimentalists looking for additional avenues to design novel thin-film microstructures.

36 MATERIALS SCIENCE↗

Numerical Investigation of Fuel Property Effects on Mixed-Mode Combustion in a Spark-Ignition Engine

In this research, lean mixed-mode combustion is numerically investigated using computational fluid dynamics (CFD) in a spark-ignition engine. A new E30 fuel surrogate is developed using a neural network model with matched octane numbers. A skeletal mechanism is also developed by automated mechanism reduction and by incorporating a NO x submechanism. A hybrid approach that couples the G-equation model and the well-stirred reactor model is employed for turbulent combustion modeling. The developed CFD model is shown to well predict pressure and apparent heat release rate (AHRR) traces compared with experiment. Two types of combustion cycles (deflagration-only and mixed-mode cycles) are observed. The mixed-mode cycles feature early flame propagation and subsequent end-gas auto-ignition, leading to two distinctive AHRR peaks. The validated CFD model is then employed to investigate the effects of NO x chemistry. The NO x chemistry is found to promote auto-ignition through the residual gas, while the deflagration phase remains largely unaffected. Sensitivity analysis is finally performed to understand effects of fuel properties, including heat of vaporization (HoV) and laminar flame speed (S L ). An increased HoV tends to suppress auto-ignition through charge cooling, while the impact of HoV on flame propagation is insignificant. In contrast, an increased S L is found to significantly promote both flame propagation and end-gas auto-ignition. The promoting effect of S L on auto-ignition is not a direct chemical effect; it is rather caused by an advancement of the combustion phasing, which increases compression heating of the end-gas.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Quantum oscillation and nontrivial transport in the Dirac semimetal Cd{sub 3}As{sub 2} nanodevice

Here, we report on the Shubnikov-de Haas oscillation in high-quality Cd{sub 3}As{sub 2} nanowires grown by a chemical vapor deposition approach. The dominant transport of topological Dirac fermions is evident by the nontrivial Berry phase in the Landau Fan diagram. The quantum oscillations rise at a small field of 2 T and preserves up to 100 K, revealing a sizeable Landau level gap and a device mobility of 2138 cm{sup 2 }V{sup −1 }s{sup −1}. The angle-variable oscillations indicate the isotropy of the bulk Dirac transport. The large estimated mean free path makes the Cd{sub 3}As{sub 2} nanowire a promising platform for the one-dimensional transport of Dirac semimetals.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

IR and SFG vibrational spectroscopy of the water bend in the bulk liquid and at the liquid-vapor interface, respectively

Vibrational spectroscopy of the water bending mode has been investigated experimentally to study the structure of water in condensed phases. In the present work, we calculate the theoretical infrared (IR) and sum-frequency generation (SFG) spectra of the HOH bend in liquid water and at the water liquid/vapor interface using a mixed quantum/classical approach. Classical molecular dynamics simulation is performed by using a recently developed water model that explicitly includes three-body interactions and yields a better description of the water surface. Ab-initio-based transition frequency, dipole, polarizability, and intermolecular coupling maps are developed for the spectral calculations. The calculated IR and SFG spectra show good agreement with the experimental measurements. In the theoretical imaginary part of the SFG susceptibility for the water liquid/vapor interface, we find two features: a negative band centered at 1615 cm{sup −1} and a positive band centered at 1670 cm{sup −1}. We analyze this spectrum in terms of the contributions from molecules in different hydrogen-bond classes to the SFG spectral density and also compare to SFG results for the OH stretch. SFG of the water bending mode provides a complementary picture of the heterogeneous hydrogen-bond configurations at the water surface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Influence of the Distributed Phase of Gas Bubbles on a Pulsed Electrical Discharge in Water

The development of a pulsed electrical discharge in water with vapor–air microbubbles, the volume distribution of which in water is close to uniform, has been studied experimentally. The presence of volumetric microbubbles with an average diameter of ~50 μm and a bulk gas content of no more than 1% does not change the thermal mechanism of the development of the discharge in water with a conductivity of ~300 μS/cm at overvoltages of 1–1.5, the minimum breakdown voltage being ~9 kV. Under these conditions, the determining role is played by the surface bubbles, which change the observed mechanism of the discharge development. The discharge is initiated in the surface bubbles simultaneously on both electrodes. The growth of the cathode channel at a velocity of ~60 m/s leads to the closure of the 1-cm-long gap during a time of ~160 μs.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Property Measurements of LiF-NaF-KF Molten Salts Doped with Corrosion Products and Oxygen

Measurements of thermophysical properties of molten salts are needed for modeling and simulation activities that support the development of molten salt reactor (MSR) technologies. Properties of interest including transition temperatures, phase behavior, heat capacity, density, volumetric thermal expansion, surface tension, viscosity, thermal diffusivity, thermal conductivity, and vapor pressure are being performed at Argonne. Results of these property measurements are suitable for use in evaluating reactor performance during startup and the early operating life of the reactor. Ingressions of oxygen and moisture into the fuel salt are expected to occur at different times during the operating life of the reactor due to system leaks, maintenance, and refueling activities. The presence of these environmental contaminants induces corrosion of structural materials. The introduction of corrosion-derived species, oxygen and moisture is expected to affect the physical and chemical properties of the salt and operation of the reactor. Previous work performed at Argonne evaluated the effects of fission product dopants on the thermal properties of eutectic LiF-NaF-KF (FLiNaK). Properties of FLiNaK are commonly used to represent those of fluoride-bearing fuel salts. Metallic corrosion products such as chromium and nickel ions together with dissolved oxygen are expected to affect system redox differently than the accumulation of fission products. Work summarized in this report was performed to measure the effects of corrosion products and dissolved oxygen on the phase transitions, and specific heat capacity of FLiNaK. Thermophysical property measurements were made using four salts that were prepared by doping aliquots of a eutectic mixture of FLiNaK with surrogate corrosion products. Controlled additions of CrF 3 and NiF 2 were used as surrogates for corrosion product contamination anticipated during extended reactor operations in which fuel salt is in contact with steel reactor components. Controlled additions of UF 4 from two sources containing known amounts of UO 2 at different concentrations were used to represent oxygen contamination. The phase transitions and specific heat capacities of the four salts were measured by using differential scanning calorimetry. Measurements were made at temperatures spanning the range of 500−900 °C, which is the expected operating range of MSRs. Measured property values were compared to values measured previously with eutectic FLiNaK without dopants. Differences between property values measured for the doped and non-doped salts were compared with the uncertainties of the measurements to determine the significance of the effect of corrosion products and oxygen on salt properties.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Near-infrared spectroscopic investigation of water in supercritical CO2 and the effect of CaCl2

Near-infrared (NIR) spectroscopy was applied to investigate the dissolution and chemical interaction of water dissolved into supercritical carbon dioxide (scCO2) and the influence of CaCl2 in the co-existing aqueous phase at fo empe e : 40 50 75 nd 100 C at 90 atm. Consistent with the trend of the vapor pressure of water, the solubility of pure water in scCO2 inc e ed f om 40 °C (0.32 mole%) o 100 °C (1.61 mole%). The presence of CaCl2 negatively affects the solubility of water in scCO2: at a given temperature and pressure the solubility of water decreased as the concentration of CaCl2 in the aqueous phase increased, following the trend of the activity of water. A 40 °C, the water concentration in scCO2 in contact with saturated CaCl2 aqueous solution was only 0.16 mole%, a drop of more than 50% as compared to pure water while that a 100 °C was 1.12 mole%, a drop of over 30% as compared to pure water, under otherwise the same conditions. Analysis of the spectral profiles suggested that water dissolved into scCO2 exists in the monomeric form under the evaluated temperature and pressure conditions, for both neat water and CaCl2 solutions. However, its rotational degrees of freedom decrease at lower temperatures due to higher fluid densities, leading to formation of weak H2O:CO2 Lewis acid-base complexes. Similarly, the nearly invariant spectral profiles of dissolved water in the presence and absence of saturated CaCl2 under the same experimental conditions was taken as evidence that CaCl2 dissolution in scCO2 was limited as the dissolved Ca2+/CaCl2 would likely be highly hydrated and would alter the overall spectra of waters in the scCO2 phase.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Switchable system for high-salinity brine desalination and fractional precipitation

A saline feed stream flows into a liquid-liquid extraction system; and a volatile organic solvent flows through a main compressor. The compressed volatile organic solvent then flows through a solvent regenerator, which can be a heat exchanger or a combination of a vaporization device and a condenser, to cool the volatile organic solvent. The cooled volatile organic solvent in liquid phase then flows into the liquid-liquid extraction system, where the saline feed stream contacts the volatile organic solvent to selectively extract water from the saline feed stream into the volatile organic solvent, producing a concentrated brine and an organic-rich mixture of water and the volatile organic solvent. The organic-rich mixture flows from the liquid-liquid extraction system into the solvent regenerator, where the organic-rich mixture is heated to produce an organic-rich vapor and desalinated water; and the organic-rich vapor is recycled as volatile organic solvent back into the liquid-liquid extraction system.

Wilson, Aaron D.↗

Using Downwelling Far- and Thermal-Infrared Hyperspectral Radiance for Cloud Phase Classification in the Antarctic

The cloud phase is one of the most important parameters of clouds. In this paper, we propose a method for cloud phase classification that synergistically utilizes the far- and thermal-infrared bands based on the Atmospheric Emitted Radiance Interferometer (AERI) at the Atmospheric Radiation Measurement West Antarctic Radiation Experiment (AWARE) observatory in 2016. The possible features in the far- and thermal-infrared bands are analyzed based on the differences in the simulated cloud brightness temperature (BT) spectra with different cloud phases. Using the support vector machine (SVM) algorithm, four features are determined to identify the cloud phase, which include the BT at 900 cm -1 , the slope of the fitted function of BT in the 900–1000 cm -1 interval, the BT difference (BTD) between 512 cm -1 and 726 cm -1 , and the BTD between 550 cm -1 and 726 cm -1 . Here, the performance of the proposed method is evaluated with Shupe’s and Turner’s method. The monthly average accuracy of the proposed method, the method without the two far-infrared features, and Turner’s method are about 76%, 36%, and 49%, respectively, which infer the good performance of the proposed method and also indicate that the far-infrared band features can effectively enhance cloud phase classification. It is notable that, compared to Shupe’s method, the accuracy for the proposed method is only 61% during the Antarctic summer, which results from the definitions of cloud phase and radiative effect. In addition, the accuracy is only 44% for Turner’s method in seasons with a low frequency of mixed clouds due to the significant effect of water vapor.

54 ENVIRONMENTAL SCIENCES↗

Green-emitting cubic GaN/In 0.16 Ga 0.84 N/GaN quantum well with 32% internal quantum efficiency at room temperature

Structural and optical properties of a green-emitting cubic (i.e., zinc blende) GaN/In 0.16 Ga 0.84 N/GaN single quantum well structure are reported. The active layer is grown on a phase-pure (i.e., 100%) cubic GaN enabled on a 1 × 1 cm 2 U-grooved silicon (100) through aspect ratio phase trapping. Energy dispersive x-ray spectroscopy combined with room temperature cathodoluminescence reveals 522 nm green light emission at room temperature with only 16.0% ± 1.6% of indium content, which is ~30% less than the amount of indium needed in a traditional green-emitting hexagonal (i.e., wurtzite) well. Temperature-dependent behavior of the green emission, such as activation energy, s-shaped peak energy shift, and linewidth, is reported. Cathodoluminescence at 8 and 300 K reveals an internal quantum efficiency of 32.0% ± 0.6%, which is higher than any reported value for cubic wells. Altogether, phase-pure cubic active layers on phase transition cubic GaN are shown to be promising for green and longer wavelength emitters.

42 ENGINEERING↗

Characterizing Airborne Phthalate Concentrations and Dynamics in a Normally Occupied Residence

Phthalate esters, commonly used as plasticizers, can be found indoors in the gas phase, in airborne particulate matter, in dust, and on surfaces. The dynamic behavior of phthalates indoors is not fully understood. In this study, time-resolved measurements of airborne phthalate concentrations and associated gas-particle partitioning data were acquired in a normally occupied residence. The vapor pressure and associated gas-particle partitioning of measured phthalates influenced their airborne dynamic behavior. Concentrations of higher vapor pressure phthalates correlated well with indoor temperature, with little discernible influence from direct occupant activity. Conversely, occupant-related behaviors substantially influenced the concentrations and dynamic behavior of a lower vapor pressure compound, diethylhexyl phthalate (DEHP), mainly through production of particulate matter during cooking events. The proportion of airborne DEHP in the particle phase was experimentally observed to increase under higher particle mass concentrations and lower indoor temperatures in correspondence with theory. Experimental observations indicate that indoor surfaces of the residence are large reservoirs of phthalates. The results also indicate that two key factors influenced by human behavior-temperature and particle mass concentration-cause short-term changes in airborne phthalate concentrations.

54 ENVIRONMENTAL SCIENCES↗

Contracting cardiomyocytes in hydrophobic room-temperature ionic liquid

Highlights: Black-Right-Pointing-Pointer Biocompatible room-temperature ionic liquid was applied on beating cardiomyocyte. Black-Right-Pointing-Pointer The lifetime of beating cardiomyocytes was depended on anion functional group. Black-Right-Pointing-Pointer A longer lifetime was recorded for no functional group on alkyl chain on their anion. Black-Right-Pointing-Pointer Amino group on alkyl chain and fluorine in anion induced fatal condition changes. Black-Right-Pointing-Pointer We reported liquid electrolyte interface to stimulate cardiomyocytes. -- Abstract: Room-temperature ionic liquids (RTILs) are drawing attention as a new class of nonaqueous solvents to replace organic and aqueous solvents for chemical processes in the liquid phase at room temperature. The RTILs are notable for their characteristics of nonvolatility, extremely low vapor pressure, electric conductivity, and incombustibility. These distinguished properties of RTILs have brought attention to them in applications with biological cells and tissue in vacuum environment for scanning electron microscopy, and in microfluidic devices for micro-total analysis system (micro-TAS). Habitable RTILs could increase capability of nonaqueous micro-TAS for living cells. Some RTILs seemed to have the capability to replace water in biological applications. However, these RTILs had been applied to just supplemental additives for biocompatible test, to fixed cells as a substitute for an aqueous solution, and to simple molecules. None of RTILs in which directly soaks a living cell culture. Therefore, we demonstrated the design of RTILs for a living cell culture and a liquid electrolyte to stimulate contracting cardiomyocytes using the RTILs. We assessed the effect of RTILs on the cardiomyocytes using the beating lifetime to compare the applicability of RTILs for biological applications. Frequent spontaneous contractions of cardiomyocytes were confirmed in amino acid anion RTILs [P{sub 8,8,8,8}][Leu] and [P{sub 8,8,8,8}][Ala], phosphoric acid derivatives [P{sub 8,8,8,8}][MeO(H)PO{sub 2}], and [P{sub 8,8,8,8}][C{sub 7}CO{sub 2}]. The anion type of RTILs had influence on applicable characteristics for the contracting cardiomyocyte. This result suggested the possibility for biocompatible design of hydrophobic group RTILs to achieve biological applications with living cells.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mass-transport properties of electrosprayed Pt/C catalyst layers for polymer-electrolyte fuel cells

Mass-transport properties of electrosprayed catalyst-layers based on Pt/C and ionomer (Nafion) are investigated with hydrogen limiting-current technique, water-vapor-uptake, scanning transmission microscopy (STEM), single-cell testing, and impedance spectroscopy. The hydrogen limiting-current technique provides the transport resistance of the layers ( R CL m t ), which demonstrates to be lower in electrosprayed layers compared with conventional layers, especially at very low platinum loadings (0.025 mg Pt ·cm -2 ) and low cell temperature, denoting superior mass-transport properties. Images of the distribution of Pt, F, and C elements reveal the ionomer preferentially interacting with the Pt nanoparticles. Water-vapor-uptake experiments show larger vapor absorption for electrosprayed than conventional catalyst layers. Such large water-vapor uptake capability is combined with superhydrophobicity, ie. very low interaction with water in liquid phase (wettability). Both apparently contradictory properties result from a particular configuration of the amphiphilic ionomer in the electrosprayed layers, and provide ideal conditions for high mass transport and ionic conductivity in a catalyst layer. Electrosprayed layers as cathode catalyst layers reflect peak response at a loading of 0.17 mg Pt ·cm -2 (18 μm layer thickness when using Pt/C 20 wt% catalyst) where they provide minimal mass-transport and polarization resistances.

08 HYDROGEN↗

Solvent Processing and Ionic Liquid-Enabled Long-Range Vertical Ordering in Block Copolymer Films with Enhanced Film Stability

Rapid and reliable processing methods for forming ordered block copolymer (BCP) materials with low defect density in a thin film geometry are required for many nanotechnology applications. Vertically aligned BCP structures, in particular, have applications ranging from nanolithography for electronics and photonics to nanoporous membranes for water remediation and novel batteries for flexible electronics. However, the attainment of nearly complete vertical orientational order of the BCP ordered phase remains challenging. Solvent-based techniques, such as direct immersion annealing (DIA) and solvent vapor annealing (SVA), have immense potential for these applications of BCP films, as it allows for tuning of their thermodynamic, structural, and chain mobility driven kinetic properties. We first demonstrate that DIA, using a judicious choice of binary solvent mixtures along with a relatively hydrophobic ionic liquid (IL), induces the rapid vertical ordering in polystyrene-b-polymethylmethacrylate (PS-PMMA) block copolymer in lamellar films. The IL establishes synergy to the binary solvent mixture of toluene and heptane to 1 create a near-neutral solvent environment for attaining the vertical microstructure of the BCP. Next, we show that IL can suppress the de-wetting of the PS-PMMA films to achieve long-range order using SVA in cylindrical films for long annealing times. Both vertical and horizontal morphology is attained in these films by selecting different solvent environments. Furthermore, attaining enhanced vertical and horizontal BCP structure with long-range defect-free order by tuning solvent quality and using additives like IL can render them useful for many nanotech applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fundamental Equation of State for Deuterium

World utilization of deuterium is anticipated to increase with the rise of fusion-energy machines such as ITER and NIF. We present a new fundamental equation of state for the thermodynamic properties of fluid deuterium. Differences between thermodynamic properties of orthodeuterium, normal deuterium, and paradeuterium are described. Separate ideal-gas functions were fitted for these separable forms together with a single real-fluid residual function. The equation of state is valid from the melting line to a maximum pressure of 2000 MPa and an upper temperature limit of 600 K, corresponding to available experimental measurements. The uncertainty in predicted density is 0.5% over the valid temperature range and pressures up to 300 MPa. The uncertainties of vapor pressures and saturated liquid densities are 2% and 3%, respectively, while speed-of-sound values are accurate to within 1% in the liquid phase.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Experimental implementation of a nonlinear beamsplitter based on a phase-sensitive parametric amplifier

Beamsplitters have played an important role in quantum optics experiments. They are often used to split and combine two beams, especially in the construct of an interferometer. In this letter, we experimentally implement a nonlinear beamsplitter using a phase-sensitive parametric amplifier, which is based on four-wave mixing in hot rubidium vapor. Here we show that, despite the different frequencies of the two input beams, the output ports of the nonlinear beamsplitter exhibit interference phenomena. We make measurements of the interference fringe visibility and study how various parameters, such as the intensity gain of the amplifier, the intensity ratio of the two input beams, and the one and two photon detunings, affect the behavior of the nonlinear beamsplitter. It may find potential applications in quantum metrology and quantum information processing.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Photoassisted physical vapor epitaxial growth of semiconductors: a review of light-induced modifications to growth processes

Herein, we review the remarkable range of modifications to materials properties associated with photoexcitation of the growth surface during physical vapor epitaxy of semiconductors. We concentrate on mechanisms producing measureable, utilizable changes in crystalline perfection, phase, composition, doping, and defect distribution. We outline the relevant physics of different mechanisms, concentrating on those yielding effects orthogonal to the primary growth variables of temperature and atomic or molecular fluxes and document the phenomenological effects reported. Based on experimental observations from a range of semiconductor systems and growth conditions, the primary effects include enhanced anion desorption, molecular dissociation, increased doping efficiency, modification to defect populations and improvements to the crystalline quality of epilayers grown at low temperatures. Future research directions and technological applications are also discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Intensification of the East Asian summer monsoon lifecycle based on observation and CMIP6

Long-term changes in the East Asian summer monsoon (EASM) lifecycle since 1979 are analyzed based on observational datasets and historical simulations of the Coupled Model Intercomparison Project Phase 6 (CMIP6). According to the observation, the active and break phases of EASM have intensified resulting in a shorter but stronger rainy season, followed by a longer dry spell. This intensification in the active-phase precipitation is accompanied by increased lower tropospheric southwesterly wind and subsequent convergence of water vapor flux. These changes are accompanied by the widely reported westward extension of the North Pacific Subtropical High, which has been associated with the warming climate. CMIP6 models generally underestimated the observed intensification of the EASM lifecycle and the monsoon precipitation. However, some of the models did simulate the intensified EASM lifecycle similar to that observed. The result highlights the reasonable performance on EASM shown in some CMIP6 models and those simulations lend support to a dynamically-driven intensification of the EASM lifecycle in the warmer climate.

54 ENVIRONMENTAL SCIENCES↗