Search NASA⌕ Search

SEARCH · Search NASA

Results for “Vortex flows”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,783 records · Page 99
All sourcesNASA NTRSDOE OSTI
NASA NTRS1976

Unsteady aerodynamic flow field analysis of the space shuttle configuration. Part 1: Orbiter aerodynamics

An analysis of the steady and unsteady aerodynamics of the space shuttle orbiter has been performed. It is shown that slender wing theory can be modified to account for the effect of Mach number and leading edge roundness on both attached and separated flow loads. The orbiter unsteady aerodynamics can be computed by defining two equivalent slender wings, one for attached flow loads and another for the vortex-induced loads. It is found that the orbiter is in the transonic speed region subject to vortex-shock-boundary layer interactions that cause highly nonlinear or discontinuous load changes which can endanger the structural integrity of the orbiter wing and possibly cause snap roll problems. It is presently impossible to simulate these interactions in a wind tunnel test even in the static case. Thus, a well planned combined analytic and experimental approach is needed to solve the problem.

Ericsson, L. E.↗
NASA NTRS1926

Lattice arrangements for rapid convergence

A simple, systematic, optimized vortex-lattice approach is developed for application to lifting-surface problems. It affords a significant reduction in computational costs when compared to current methods. Extensive numerical experiments have been carried out on a wide variety of configurations, including wings with camber and single or multiple flaps, as well as high-lift jetflap systems. Rapid convergence as the number of spanwise or chordwise lattices are increased is assured, along with accurate answers. The results from this model should be useful not only in preliminary aircraft design but also, for example, as input for wake vortex roll-up studies and transonic flow calculations.

Hough, G. R.↗
NASA NTRS1979

An evaluation of four single element airfoil analytic methods

A comparison of four computer codes for the analysis of two-dimensional single element airfoil sections is presented for three classes of section geometries. Two of the computer codes utilize vortex singularities methods to obtain the potential flow solution. The other two codes solve the full inviscid potential flow equation using finite differencing techniques, allowing results to be obtained for transonic flow about an airfoil including weak shocks. Each program incorporates boundary layer routines for computing the boundary layer displacement thickness and boundary layer effects on aerodynamic coefficients. Computational results are given for a symmetrical section represented by an NACA 0012 profile, a conventional section illustrated by an NACA 65A413 profile, and a supercritical type section for general aviation applications typified by a NASA LS(1)-0413 section. The four codes are compared and contrasted in the areas of method of approach, range of applicability, agreement among each other and with experiment, individual advantages and disadvantages, computer run times and memory requirements, and operational idiosyncrasies.

Freuler, R. J.↗
NASA NTRS1983

Flow visualization of the wake of a transport aircraft model with lateral-control oscillations

An exploratory flow visualization study conducted in the Langley Vortex Research Facility to investigate the effectiveness of lateral control surface oscillations as a potential method for wake vortex attenuation on a 0.03 scale model of a wide body jet transport aircraft is described. Effects of both asymmetric surface oscillation (control surfaces move as with normal lateral control inputs) and symmetric surface oscillation (control surfaces move in phase) are presented. The asymmetric case simulated a flight maneuver which was previously investigated on the transport aircraft during NASA/FAA flight tests and which resulted in substantial wake vortex attenuation. Effects on the model wake vortex systems were observed by propelling the model through a two dimensional smoke screen perpendicular to the model flight path. Results are presented as photographic time histories of the wake characteristics recorded with high speed still cameras. Effects of oscillation on the wake roll up are described in some detail, and the amount of vortex attenuation observed is discussed in comparative terms. Findings were consistent with flight test results in that only a small amount of rotation was observed in the wake for the asymmetric case. A possible aerodynamic mechanism contributing to this attenuation is suggested.

Jordan, F. L., Jr.↗
NASA NTRS1982

Advances in NASA research on nuclear-pumped lasers

NASA has been primarily interested in nuclear-pumped lasers using the He-3 or U-235F6 reaction for lasant excitation. With He-3 excitation, a large volume, multiple-path He-3-Ar nuclear laser has produced an output of 1 kilowatt. Power deposition was shown to be homogeneous over this volume. The CO laser has been pumped for the first time using the He-3 reaction, producing approximately 200 Watts. Using a boron-10 coating to excite N2, nuclear lasing has been achieved in CO2 in a transfer laser configuration. Nuclear lasing of Ar-Xe has been demonstrated using fission fragment excitation from U-235F6. Research on the gas core reactor has resulted in a steady state operational power of 30 kilowatts with flowing U-235F6 in an argon vortex.

De Young, R. J.↗
NASA NTRS1984

An analytical design procedure for the determination of effective leading edge extensions on thick delta wings

An analytical design procedure for leading edge extensions (LEE) was developed for thick delta wings. This LEE device is designed to be mounted to a wing along the pseudo-stagnation stream surface associated with the attached flow design lift coefficient of greater than zero. The intended purpose of this device is to improve the aerodynamic performance of high subsonic and low supersonic aircraft at incidences above that of attached flow design lift coefficient, by using a vortex system emanating along the leading edges of the device. The low pressure associated with these vortices would act on the LEE upper surface and the forward facing area at the wing leading edges, providing an additional lift and effective leading edge thrust recovery. The first application of this technique was to a thick, round edged, twisted and cambered wing of approximately triangular planform having a sweep of 58 deg and aspect ratio of 2.30. The panel aerodynamics and vortex lattice method with suction analogy computer codes were employed to determine the pseudo-stagnation stream surface and an optimized LEE planform shape.

Farhad Ghaffari↗
NASA NTRS1984

The structure of the vorticity field in turbulent channel flow. Part 1: Analysis of instantaneous fields and statistical correlations

An investigation into the existence of hairpin vortices in turbulent channel flow is conducted using a database generated by the large eddy simulation technique. It is shown that away from the wall the distribution of the inclination angle of vorticity vector attains its maximum at about 45 deg to the wall. Two point correlations of velocity and vorticity fluctuations strongly support a flow model consisting of vortical structures inclined at 45 deg to the wall. The instantaneous vorticity vectors plotted in planes inclined at 45 deg show that the flow contains an appreciable number of hairpins. Vortex lines are used to display the three dimensional structure of hairpins, which are shown to be generated from deformation of transverse vortex filaments.

Moin, P.↗
NASA NTRS1984

Numerical studies of motion of vortex filaments - Implementing the asymptotic analysis

A computational code is developed for the integro-differential equations governing the motion of the centerlines of vortex filaments submerged in a background potential flow. These equations, which are derived from the method of matched asymptotic analysis, include the effect of the decaying large-magnitude circumferential and axial velocity components in the vortical cores. Numerical examples are presented to assess the effect of a large axial velocity and that of nonsimilar initial profiles in the vortical cores. The initial configurations of the filaments are chosen so as to fulfill the basic assumption of the asymptotic analysis, which is that the effective vortical core size is much smaller than all the other length scales in the flowfield, e.g., the radius of curvature and the interfilament distance. The computations are continued until the basic assumption is no longer valid, that is when the merging or intersection of filaments has begun. A classification of the various types of local or global merging or intersection of filaments is made and demonstrated by numerical examples. It is then shown that the asymptotic solution not only provides the initial data but also can be used to formulate the appropriate boundary conditions for the numerical solution of a merged region.

Liu, C. H.↗
NASA NTRS1985

Low-speed stability and control wind-tunnel investigations of effects of spanwise blowing on fighter flight characteristics at high angles of attack

The effects of spanwise blowing on two configurations representative of current fighter airplanes were investigated. The two configurations differed only in wing planform, with one incorporating a trapezoidal wing and the other a 60 delta wing. Emphasis was on determining the lateral-directional characteristics, particularly in the stall/departure angle-of-attack range; however, the effects of spanwise blowing on the longitudinal aerodynamics were also determined. The-tunnel tests included measurement of static force and forced-oscillation aerodynamic data, visualization of the airflow changes created by the spanwise blowing, and free-flight model tests. The effects of blowing rate, chordwise location of the blowing ports, asymmetric blowing, and blowing on the conventional aerodynamic control characteristics were investigated. In the angle-of-attack regions in which the spanwise blowing substantially improved the wing upper-surface flow field (i.e., provided reattachment of the flow aft of the leading-edge vortex), improvements in both static and dynamic lateral-directional stability were observed. Blowing effects on stability could be proverse or adverse depending on blowing rate, blowing port loaction, and wing planform. Free-flight model tests of the trapezoidal wing confirmed the beneficial effects of spanwise blowing measured in the static and dynamic force tests.

Satran, D. R.↗
NASA NTRS1985

Flow velocity measurements by image processing of optically activated tracers

A computerized flow visualization technique capable of quantifying the flow field automatically has been developed. This technique uses afterglowing effect of optically activated phosphorescent particles to retrieve vectorial information on each trace. By using this information, in conjunction with computer image processing, the flow field of a free surface transient vortex was investigated.

Gharib, M.↗
NASA NTRS1984

Modeling techniques for transonic airfoils

In the present comparative study of computer codes for the modeling of two-dimensional, single element airfoil sections for various section geometry classes, two of the codes use vortex singularities methods to obtain the potential flow solution while the remainder solve the full inviscid potential flow equations by means of finite differencing techniques that allow results to be obtained for transonic flow about an airfoil which includes weak shocks. Computational results are presented for a symmetrical airfoil section, a conventional section, and a supercritical one. Icing condition applications of the models are noted. The model codes' range of applicability and agreement with each other and experimental results, as well as their computer run times and memory requirements, are noted.

Petrie, S. L.↗
NASA NTRS1986

Steady supersonic Navier-Stokes solutions of a 75 deg delta wing

Steady solutions about a slender sharp edged delta wing in a supersonic freestream for moderate and high angles of attack are obtained numerically by time integration of the unsteady compressible three dimensional laminar Navier-Stokes equations. The main features of the flow, including primary and secondary separation, and vortex position and strength, are adequately simulated in the numerical solutions. Improved resolution of the computational grid in the leading edge region from a previous solution had considerable effect on the accuracy of the solutions. Good agreement between numerical solutions and experimental data was obtained for two cases. A local timestepping procedure is used to speed convergence by approximately a factor of two.

Buter, T. A.↗
NASA NTRS1985

The structure of the vorticity field in turbulent channel flow. I - Analysis of instantaneous fields and statistical correlations

An investigation into the existence of hairpin vortices in turbulent channel flow is conducted using a database generated by the large eddy simulation technique. It is shown that away from the wall the distribution of the inclination angle of vorticity vector attains its maximum at about 45 deg to the wall. Two point correlations of velocity and vorticity fluctuations strongly support a flow model consisting of vortical structures inclined at 45 deg to the wall. The instantaneous vorticity vectors plotted in planes inclined at 45 deg show that the flow contains an appreciable number of hairpins. Vortex lines are used to display the three dimensional structure of hairpins, which are shown to be generated from deformation of transverse vortex filaments.

Moin, P.↗
NASA NTRS1986

Numerical studies of motion and decay of vortex filaments

A computational code is developed for the integro-differential equations governing the motion of the centerlines of vortex filaments submerged in a background potential flow. These equations, which are derived from the method of matched asymptotic analysis, include the effect of decaying large-magnitude circumferential and axial velocity components in the vortical cores. Numerical examples are presented to assess the effect of large axial velocity and of nonsimilar initial profiles in vortical cores. The initial configurations of the filaments are chosen so as to fulfill the basic assumption of asymptotic analysis, which is the effective vortical core size is much smaller than all other length scales in the flowfield, e.g., the radius of curvature and interfilament distance. The computations are continued until the basic assumption is no longer valid, that is, when the merging or intersection of filaments have begun. Various types of local or global merging or intersection of filaments are classified and demonstrated by numerical examples.

Liu, C. H.↗
NASA NTRS1987

Simultaneous measurements of the thermospheric wind profile at three separate positions in the dusk auroral oval

In the present three-dimensional wind field observations in the dusk auroral oval, the F region winds appear to be at the transition from a clockwise vortex centered at dusk to an antisunward flow at the nightside of the polar cap, while the E region winds seem to be part of a gravity wave with a wind amplitude of 125 m/sec. The wave period is found to be close to three hours, on the basis of the ratio of the magnitude of the wind component normal to the direction of wave propagation to the magnitude parallel to the direction of propagation. The observations show that significant energy resides in the divergent motions that are part of the transient response in the E region, at least in this case.

Mikkelsen, I. S.↗
NASA NTRS1990

Secondary frequencies in the wake of a circular cylinder with vortex shedding

A detailed numerical study of two-dimensional flow past a circular cylinder at moderately low Reynolds numbers was conducted using three different numerical algorithms for solving the time-dependent compressible Navier-Stokes equations. It was found that if the algorithm and associated boundary conditions were consistent and stable, then the major features of the unsteady wake were well-predicted. However, it was also found that even stable and consistent boundary conditions could introduce additional periodic phenomena reminiscent of the type seen in previous wind-tunnel experiments. However, these additional frequencies were eliminated by formulating the boundary conditions in terms of the characteristic variables. An analysis based on a simplified model provides an explanation for this behavior.

Abarbanel, Saul S.↗
NASA NTRS1990

On the Goertler instability in hypersonic flows: Sutherland law fluids and real gas effects

The Goertler vortex instability mechanism in a hypersonic boundary layer on a curved wall is investigated. The precise roles of the effects of boundary layer growth, wall cooling, and gas dissociation is clarified in the determination of stability properties. It is first assumed that the fluid is an ideal gas with viscosity given by Sutherland's law. It is shown that when the free stream Mach number M is large, the boundary layer divides into two sublayers: a wall layer of O(M sup 3/2) thickness over which the basic state temperature is O(M squared) and a temperature adjustment layer of O(1) thickness over which the basic state temperature decreases monotonically to its free stream value. Goertler vortices which have wavelengths comparable with the boundary layer thickness are referred to as wall modes. It is shown that their downstream evolution is governed by a set of parabolic partial differential equations and that they have the usual features of Goertler vortices in incompressible boundary layers. As the local wavenumber increases, the neutral Goertler number decreases and the center of vortex activity moves towards the temperature adjustment layer. Goertler vortices with wavenumbers of order one or larger must necessarily be trapped in the temperature adjustment layer and it is this mode which is most dangerous. For this mode, it was found that the leading order term in the Goertler number expansion is independent of the wavenumber and is due to the curvature of the basic state. This term is also the asymptotic limit of the neutral Goertler numbers of the wall mode. To determine the higher order corrections terms in the Goertler number expansion, two wall curvature cases are distinguished. Real gas effects were investigated by assuming that the fluid is an ideal dissociating gas. It was found that both gas dissociation and wall cooling are destabilizing for the mode trapped in the temperature adjustment layer, but for the wall mode trapped near the wall the effect of gas dissociation can be either destabilizing or stabilizing.

Fu, Yibin B.↗
NASA NTRS1991

Secondary frequencies in the wake of a circular cylinder with vortex shedding

A detailed numerical study of two-dimensional flow past a circular cylinder at moderately low Reynolds numbers was conducted using three different numerical algorithms for solving the time-dependent compressible Navier-Stokes equations. It was found that if the algorithm and associated boundary conditions were consistent and stable, then the major features of the unsteady wake were well-predicted. However, it was also found that even stable and consistent boundary conditions could introduce additional periodic phenomena reminiscent of the type seen in previous wind-tunnel experiments. However, these additional frequencies were eliminated by formulating the boundary conditions in terms of the characteristic variables. An analysis based on a simplified model provides an explanation for this behavior.

Abarbanel, Saul S.↗