Search NASA⌕ Search

SEARCH · Search NASA

Results for “X ray diffraction analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,783 records · Page 99

The “quiet Goldschmidt”—a mechanochemical, thermoanalytical, and spectroscopic study of selected steps of the aluminothermic reaction

The Goldschmidt reaction (2Al+α-Fe{sub 2}O{sub 3}) was investigated both under mechanical and thermal activation by employing a combination of analytical methods such as ESR and Mössbauer spectroscopy, magnetic susceptibility, X-ray powder diffraction, and thermal analysis (TA). Both the mechanical treatment and the TA runs under air caused the reaction conditions of “quiet redox reactions” due to a retarding effect and enabled a reaction study in a “slow motion mode”. This allowed to establish distinct partial steps of the integral reaction process depending on the intensity of the mechanical impact, the educt composition, the gas phase composition, and, finally, the thermal excitation in the TA runs. Particular attention was payed to the role of the gas phase and to the reaction of aluminum with differently activated oxygen species. The phlegmatizing effect was traced back to the formation of Al{sub 2}O{sub 3} coverages of the Al particles. - Highlights: • The usually extremely violent Goldschmidt reaction was studied in a “slow motion mode”. • Both the mechanochemical and the thermal treatment caused a phlegmatizing effect on the reaction. • Early reaction stages were sensitively indicated by ESR and magnetic measurements. • Intermediates and final products were characterized by XRD and Mössbauer data. • Differently activated oxygen species react with aluminum to form an oxide coverage retarding the vigorous reaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Heteropolytungstate nanoparticles: Microemulsion-mediated preparation and investigation of their catalytic activity in the epoxidation of olefins

Highlights: • Keggin type Q{sub 3}PW{sub 12}O{sub 40} nanoparticles were synthesized by using microemulsion system. • The nanoparticles have uniform size of about 25 nm and spherical morphologies. • The prepared nanoparticles act as reusable catalyst in the epoxidation of olefins with H{sub 2}O{sub 2}. - Abstract: Keggin type Q{sub 3}PW{sub 12}O{sub 40} nanoparticles (Q = cetyltrimethylammonium cation) were synthesized in water-in-oil (w/o) microemulsion consisted of water/cetyltrimethylammonium bromide/n-butanol/isooctane. Reaction of Na{sub 2}WO{sub 4}, Na{sub 2}HPO{sub 4} and hydrochloric acid within water containing nanoreactors of reverse micelles resulted in the preparation of Q{sub 3}PW{sub 12}O{sub 40} nanoparticles. The resultant nanoparticles were analyzed by physicochemical methods such as FT-IR spectroscopy, X-ray diffraction, energy-dispersive X-ray analysis, thermogravimetric analyses (TGA-DTA), scanning and transmission electron microscopy and atomic force microscopy which show nearly uniform spherical nanoparticles with size of about 15 nm. Finally, catalytic activity of the Q{sub 3}PW{sub 12}O{sub 40} nanoparticles was examined in the epoxidation of olefins with H{sub 2}O{sub 2}. The prepared nanoparticles acted as recoverable and reusable catalyst in the epoxidation of olefins with H{sub 2}O{sub 2}.

36 MATERIALS SCIENCE↗

Preparation, Characterization and Release Properties of Nanostructured Polystyrene Microparticles Containing Different Silicates

Nanostructured polystyrene microparticles containing different silicates as nanosized filler were successfully prepared using an emulsification/solvent evaporation method. X-ray diffraction showed that all hybrid systems were in an intercalated morphology. The microparticles display regular geometry, improved thermal resistance and release behavior dependent upon the silicate type in the hybrid, as demonstrated by preliminary investigations performed using benzophenone as model penetrant.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Morphological and electrical properties of epoxy-based composites reinforced with exfoliated graphite

An experimental study has been carried out to prepare and characterize epoxy/amine-based composites filled with different percentages of partially exfoliated graphite (i.e. pEG) particles having an exfoliation degree of 56% in order to analyze the effect of the filler amounts on the electrical properties of the resulting nanocomposites. Moreover, in order to fully investigate the direct relationship between the physical properties of the employed filler and the results of the electrical characterization, a structural and morphological characterization of the pEG samples is carried out by means of various type of analysis such as X-ray diffraction patterns, micro-Raman and Scanning Electron Microscopy (SEM) images. The DC electrical characterization reveals a percolation thresholds (EPT) that falls in the range [2–3] wt% and an electrical conductivity of about 0.66 S/m at the highest filler loading (6.5 wt%). From the analysis of the percolative curve it is possible to derive the percolation law parameters and in particular the critical exponent t, whose value (i.e. 1.2) reflects an effective 2D organization of the percolating structure consistent with the type of filler used (2-dimensional). Finally, an extensive analysis concerning the electrical properties in the frequency domain has been carried out in order to evaluate the effectiveness of pEG-loaded composites in terms of electromagnetic interference compatibility (EMC) and their applicability as radar absorbers materials (RAMs).

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Structural investigation of tetraperoxo complexes of Mo(VI) and W(VI)

The family of very unstable tetraperoxo compounds has been prepared from aqueous solutions containing H{sub 2}O{sub 2} and salts of Mo(VI) or W(VI). The crystal structures of Na{sub 2}[Mo(O{sub 2}){sub 4}].4H{sub 2}O and Na{sub 2}[W(O{sub 2}){sub 4}].4H{sub 2}O have been determined from single-crystal data, while the crystal structures of Rb{sub 2}[Mo(O{sub 2}){sub 4}], Cs{sub 2}[Mo(O{sub 2}){sub 4}], Rb{sub 2}[W(O{sub 2}){sub 4}] and Cs{sub 2}[W(O{sub 2}){sub 4}] have been determined from powder X-ray diffraction data. The compounds were also characterised by IR spectroscopy and the number of peroxo groups was determined by titration methods. By means of the density functional theory (DFT) method, the geometry and stability of tetraperoxo complexes have been studied. Even though in all tetraperoxo complexes the central atom Mo(VI), W(VI) or V(V) is surrounded by four peroxo groups and the geometry of the [Me(O{sub 2}){sub 4}]{sup n-} anion is essentially the same, the investigated compounds differ in stability and colour and crystallise in different crystallographic systems. - Graphical abstract: The family of tetraperoxo compounds of Mo(VI) or W(VI) have been obtained. Its crystal structures from single-crystal and from powder X-ray diffraction data have been determined. The compounds were characterised by IR spectroscopy and analytical methods. By means of the density functional theory (DFT) method, the geometry and stability of tetraperoxo complexes have been studied.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Determination of the solubility of tin indium oxide using in situ and ex x-ray diffraction

A novel approach to determine the thermodynamic solubility of tin in indium oxide via the exsolution from tin overdoped nano-ITO powders is presented. High-energy, in situ and ex situ synchrotron X-ray diffraction was utilized to study the solubility limit at temperatures ranging from 900 C to 1375 C. The tin exsolution from overdoped nanopowders and the formation of In{sub 4}Sn{sub 3}O{sub 12} were observed in situ during the first 4-48 h of high-temperature treatment. Samples annealed between 900 C and 1175 C were also studied ex situ with heat treatments for up to 2060 h. Structural results obtained from Rietveld analysis include compositional phase analysis, atomic positions, and lattice parameters. The tin solubility in In{sub 2}O{sub 3} was determined using the phase analysis compositions from X-ray diffraction and the elemental compositions obtained from X-ray fluorescence. Experimental complications that can lead to incorrect tin solubility values in the literature are discussed.

36 MATERIALS SCIENCE↗

Grating-based holographic diffraction methods for X-rays and neutrons: phase object approximation and dynamical theory

A method dubbed grating-based holography was recently used to determine the structure of colloidal fluids in the rectangular grooves of a diffraction grating from X-ray scattering measurements. Similar grating-based measurements have also been recently made with neutrons using a technique called spin-echo small-angle neutron scattering. The analysis of the X-ray diffraction data was done using an approximation that treats the X-ray phase change caused by the colloidal structure as a small perturbation to the overall phase pattern generated by the grating. In this paper, the adequacy of this weak phase approximation is explored for both X-ray and neutron grating holography. Additionally, it is found that there are several approximations hidden within the weak phase approximation that can lead to incorrect conclusions from experiments. In particular, the phase contrast for the empty grating is a critical parameter. Finally, while the approximation is found to be perfectly adequate for X-ray grating holography experiments performed to date, it cannot be applied to similar neutron experiments because the latter technique requires much deeper grating channels.

36 MATERIALS SCIENCE↗

Magnetic and charge transport properties of the Na-based Os oxide pyrochlore

The Na-based osmium oxide pyrochlore was synthesized for the first time by an ion-exchange method using KOs{sub 2}O{sub 6} as a host. The composition was identified as Na{sub 1.4}Os{sub 2}O{sub 6}.H{sub 2}O by electron probe micro-analysis, thermogravimetric analysis, and structural analysis using synchrotron X-ray diffraction. Na{sub 1.4}Os{sub 2}O{sub 6}.H{sub 2}O crystallizes in a regular pyrochlore structure with some defects (space group: Fd-3m, a=10.16851(1) A). Electrical resistivity, heat capacity, and magnetization measurements clearly showed absence of superconductivity down to 2 K, being in large contrast to what was found for the beta-type pyrochlore superconductor AOs{sub 2}O{sub 6} (A=Cs, Rb, and K). The Sommerfeld coefficient is 22 mJ K{sup -2} mol{sup -1}, being the smallest among AOs{sub 2}O{sub 6}. A magnetic anomaly at {approx}57 K and associated magneto-resistance (+3.7% at 2 K in 70 kOe) were found. - Graphical abstract: Crystal structure of the Na-based Os oxide pyrochlore Na{sub 1.4}Os{sub 2}O{sub 6}.H{sub 2}O.

36 MATERIALS SCIENCE↗

One-pot template-free synthesis of mesoporous boehmite core-shell and hollow spheres by a simple solvothermal route

Uniform-sized and monodispersed boehmite core-shell and hollow spheres have been successfully synthesized using a template-free solvothermal route. The experimental parameters such as reaction duration, the trisodium citrate amounts and solvents are shown to play important roles in the formation of the AlOOH core-shell and hollow spheres. X-ray diffraction, Fourier transform IR, thermal gravimetric analysis, N{sub 2} adsorption/desorption, scanning electron microscopy, transmission electron microscopy, and high-resolution TEM were used to characterize the products. The results show that the prepared polycrystalline hollow spheres are composed of well-aligned AlOOH nanowires and have an orthorhombic structure. Finally, a dissolution-renucleation mechanism was proposed for the formation of boehmite hollow structures.

36 MATERIALS SCIENCE↗

Materials corrosion of high temperature alloys immersed in 600°C binary nitrate salt

Thirteen high temperature alloys were immersion tested in a 60/40 binary nitrate salt. Samples were interval tested up to 3000 hours at 600ÀC with air as the ullage gas. Chemical analysis of the molten salt indicated lower nitrite concentrations present in the salt, as predicted by the equilibrium equation. Corrosion rates were generally low for all alloys. Corrosion products were identified using x-ray diffraction and electron microprobe analysis. Fe-Cr based alloys tended to form mixtures of sodium and iron oxides, while Fe-Ni/Cr alloys had similar corrosion products plus oxides of nickel and chromium. Nickel based alloys primarily formed NiO, with chromium oxides near the oxide/base alloy interface. In625 exhibited similar corrosion performance in relation to previous tests, lending confidence in comparisons between past and present experiments. HA230 exhibited internal oxidation that consisted of a nickel/chromium oxide. Alloys with significant aluminum alloying tended to exhibit superior performance, due formation of a thin alumina layer. Soluble corrosion products of chromium, molybdenum, and tungsten were also formed and are thought to be a significant factor in alloy performance.

Kruizenga, Alan Michael↗

Neutron and X-ray diffraction studies on the high temperature phase of Mn{sub 3}(VO{sub 4}){sub 2}, the new isostructural compound NaMn{sub 4}(VO{sub 4}){sub 3} and their mixed crystals Na{sub x}Mn{sub 4.5-x/2}(VO{sub 4}){sub 3} (0{<=}x{<=}1)

This paper presents a detailed structure analysis (combined Rietveld analysis of X-ray and neutron powder diffraction data as well as quantum mechanical calculations) of the high temperature phase of Mn{sub 3}(VO{sub 4}){sub 2} (space group I4 Macron 2d). Special attention is directed to the analysis of the local coordination around Mn{sup 2+} ions or vacancies within a stella quadrangula configuration of anions. Furthermore, the new compound NaMn{sub 4}(VO{sub 4}){sub 3} is described as well as a range of mixed crystals between NaMn{sub 4}(VO{sub 4}){sub 3} and Mn{sub 3}(VO{sub 4}){sub 2} (described by the formula Na{sub x}Mn{sub 4.5-x/2}(VO{sub 4}){sub 3}, 0{<=}x{<=}1) which were synthesized by a solid state route. All compounds were shown to be isostructural to the high temperature phase Mn{sub 3}(VO{sub 4}){sub 2}. - Graphical abstract: The crystal structure of the new compound NaMn{sub 4}(VO{sub 4}){sub 3}. Highlights: Black-Right-Pointing-Pointer We present neutron and X-ray diffraction studies on high temperature-Mn{sub 3}(VO{sub 4}){sub 2}. Black-Right-Pointing-Pointer Structural details of partly filled stellae quadrangulae positions are discussed. Black-Right-Pointing-Pointer Refined structural parameters and theoretical calculations are compared. Black-Right-Pointing-Pointer We investigate the mixed crystal system Mn{sub 3}(VO{sub 4}){sub 2}-NaMn{sub 4}(VO{sub 4}){sub 3}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mechanosynthesis and magnetic properties of nanocrystalline LaFeO{sub 3} using different iron oxides

The synthesis of the orthoferrite LaFeO{sub 3} using high-energy ball-milling of La{sub 2}O{sub 3} and Fe{sub 3}O{sub 4} or {alpha}-Fe{sub 2}O{sub 3} oxides and subsequent thermal treatments of resulting powders was studied. The phase evolution during the mechanical treatment was analyzed by X-ray diffraction (XRD), differential thermal analysis (DTA) and scanning electron microscopy (SEM). Also, magnetic properties of the obtained materials were measured at room temperature by vibrating sample magnetometry (VSM). From 30 min of mechanochemical activation the gradual disappearance of reactants and the formation of LaFeO{sub 3} were observed. For both reactive mixtures the reaction was completed after 3 h of milling. Magnetic hysteresis loops of these mechanoactivated samples showed a significant ferromagnetic component in LaFeO{sub 3}. This behavior was interpreted on the basis of a spin-canting effect induced by the mechanochemical treatment. Thermal treatments allowed the relaxation of the distorted structure, resulting in the formation of the conventional antiferromagnetic LaFeO{sub 3} phase.

36 MATERIALS SCIENCE↗

Solvothermal syntheses and structures of indium(III)-binaphthalenyl dicarboxylate complexes with yellow/blue luminescence

Two novel In(III) complexes, [In(bna)(Hbna)]{sub n} (1) and [In{sub 2}(bna){sub 2}(mu{sub 2}-OH){sub 2}]{sub n}.4nH{sub 2}O (2) (H{sub 2}bna=2,2'-dihydroxy-1,1'-binaphthyl-3,3'-dicarboxylate acid), have been reported. Complex 1 adopts a 2D layer structure, where each layer composed from homochiral ligands is chiral while the ligands in two neighboring layers are enantiomer. Complex 2 is constructed by individual -In-O-In- chains, which are further connected by bna{sup 2-} into a 3D honeycomb framework. As a derivative of H{sub 2}bna ligand, dmbna (3) was recrystallized for structurally comparison with 1-2 (dmbna=dimethyl 2,2'-dihydroxy-1,1'-binaphthyl-3,3'-dicarboxylate). X-ray powder diffractions (XRD) and thermogravimetric analyses (TGA) for 1-2 show that they are highly thermally stable in the solid state. Complexes 1 and 2 exhibit the intense yellow luminescence at 573 nm and blue luminescence at 459 nm at room temperature, respectively. And an astonishing blue shift of 105 nm is observed for complex 1 when it is measured at 10 K. - Graphical abstract: Two indium(III)-bna compounds were solvothermally synthesized. 1 adopts an unprecedented 2D chiral layer. 2 is constructed by -In-O-In- chains, which are further connected by bna{sup 2-} into a 3D honeycomb framework.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Solvothermal synthesis, crystal structure, and second-order nonlinear optical properties of a new noncentrosymmetric gallium-organic framework material, [N(C{sub 3}H{sub 7}){sub 4}]{sub 3}Ga{sub 3}[C{sub 6}H{sub 3}(CO{sub 2}){sub 3}]{sub 4}

A novel noncentrosymmetric (NCS) gallium-organic framework material, [N(C{sub 3}H{sub 7}){sub 4}]{sub 3}Ga{sub 3}[C{sub 6}H{sub 3}(CO{sub 2}){sub 3}]{sub 4} (CAUMOF-11) has been synthesized by a solvothermal reaction using Ga(NO{sub 3}){sub 3}{center_dot}xH{sub 2}O, 1,3,5-C{sub 6}H{sub 3}(CO{sub 2}H){sub 3}, N(C{sub 3}H{sub 7}){sub 4}Cl, HNO{sub 3}, and HCON(CH{sub 3}){sub 2} at 180 Degree-Sign C. The structure of the reported material has been determined by single-crystal X-ray diffraction. CAUMOF-11 has an anionic three-dimensional framework with aligned four-coordinate GaO{sub 4} tetrahedra and 1,3,5-benzenetricarboxylate groups. Tetrapropylammonim cations reside within the channel and maintain the charge balance. Detailed structural analyses with full characterization including infrared spectroscopy, thermogravimetric analysis, elemental analysis, ion-exchange reactions, topotactic decomposition, and gas adsorption experiments are reported. Powder second-harmonic generating (SHG) measurements on CAUMOF-11, using 1064 nm radiation, exhibit SHG efficiency of 15 times that of {alpha}-SiO{sub 2} and the material is phase-matchable (type-1). - Graphical Abstract: Second-order nonlinear optical measurements on CAUMOF-11 reveal that the material is phase-matchable (type-1) with SHG efficiency of 15 times that of {alpha}-SiO{sub 2}. Highlights: Black-Right-Pointing-Pointer A new NCS Ga-organic framework was solvothermally synthesized. Black-Right-Pointing-Pointer CAUMOF-11 exhibits SHG efficiency of 15 times that of {alpha}-SiO{sub 2}. Black-Right-Pointing-Pointer Thermal decomposition of CAUMOF-11 crystal maintains the original morphology.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

LUNUS, Version 0.1a

LUNUS software for generating 3D maps of diffuse scattering from macromolecular X-ray crystallography diffraction images. A set of tools needed for advanced refinement of crystal structures and crystallographic charge density models. Includes tools for processing X--ray diffraction images, charge density maps, and structure factors for analysis of diffuse X-ray scattering and charge density variations in crystallography. Specific methods include: elementary algebraic operations on images and 3D lattices; fourier transform of images and 3D lattices; image processing to measure diffuse intensity; crystallographic refinement; and 3D integration of diffuse intensity.

Wall, Michael↗

LUNUS, Version 0.1a

LUNUS software for generating 3D maps of diffuse scattering from macromolecular X-ray crystallography diffraction images. A set of tools needed for advanced refinement of crystal structures and crystallographic charge density models. Includes tools for processing X--ray diffraction images, charge density maps, and structure factors for analysis of diffuse X-ray scattering and charge density variations in crystallography. Specific methods include: elementary algebraic operations on images and 3D lattices; fourier transform of images and 3D lattices; image processing to measure diffuse intensity; crystallographic refinement; and 3D integration of diffuse intensity.

Wall, Michael↗

Synthesis and crystal structure determination of yttrium ultraphosphate YP{sub 5}O{sub 14}

The crystal structure of monoclinic YP{sub 5}O{sub 14} (space group C2/c, a=12.919(2) A, b=12.796(4) A, c=12.457(2) A, {beta}=91.30(1){sup o}, Z=8) has been refined from single-crystal X-ray diffraction data. Full-matrix least-squares refinement on F{sup 2} using 2249 independent reflections for 183 refinable parameters results in a final R value of 0.027 ({omega}R=0.069). The structure is isotypic with HoP{sub 5}O{sub 14}. This structure is built up from infinite layers of PO{sub 4} tetrahedra linked through isolated YO{sub 8} polyhedra. The three-dimensional cohesion of the framework results from Y-O-P bridges. This crystal structure refinement leads to the calculated X-ray diffraction powder pattern of this monoclinic polymorph, which has been the starting point of a thorough study of the solid-state synthesis of this ultraphosphate. This investigation further leads to a better outstanding of features observed during the synthesis of powdered samples. The thermal behavior of this ultraphosphate has been studied by DTA and TGA analyses. The infrared and Raman spectroscopic characterizations have been carried out on polycrystalline samples. The luminescence properties of the Eu{sup 3+} ion incorporated in the monoclinic C2/c polymorph of YP{sub 5}O{sub 14} as local structural probe show that in YP{sub 5}O{sub 14}: 5% Eu{sup 3+} sample, the Eu{sup 3+} ions are distributed over the two Y{sup 3+} crystallographic sites of C{sub 2} symmetry of this structure. - Graphical Abstract: The crystal structure of the monoclinic C2/c polymorph of YP{sub 5}O{sub 14} has been refined from single-crystal X-ray diffraction data. The luminescence properties of the Eu{sup 3+} ion incorporated in this matrix as local structural probe show that the Eu{sup 3+} ions are distributed over the two Y{sup 3+} crystallographic sites of C{sub 2} symmetry of this structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural, thermal and spectroscopic properties of highly Er3+-doped novel oxyfluoride glasses for photonic application

Graphical abstract: - Highlights: • Er{sup 3+}-doped novel oxyfluoride glasses have been prepared by melt quenching technique. • Structural, thermal and spectroscopic properties have been carried out. • SALSFEr glasses exhibit intense green and weak red emissions at 365 nm excitation. • Major laser transition for Er{sup 3+} ion in SALSFEr glasses is {sup 4}I{sub 13/2} → {sup 4}I{sub 15/2} (1.53 μm). • These results suggest the possibility of using SALSFEr glasses as photonic devices. - Abstract: The Er{sup 3+}-doped novel oxyfluoride glasses of composition (43 − x)SiO{sub 2}–10Al{sub 2}O{sub 3}–24LiF–23SrF{sub 2}–xEr{sub 2}O{sub 3}, where x = 1.0, 2.0, 4.0 and 6.0 mol%, have been prepared by conventional melt quenching technique and are characterized through X-ray diffraction (XRD), differential thermal analysis (DTA), Raman, Fourier transform infrared (FT-IR) analysis, optical absorption spectra, visible (vis) and near-infrared (NIR) emission spectra measurements. Judd–Ofelt (JO) intensity parameters (Ω{sub λ}, λ = 2, 4 and 6) have been derived from the absorption spectrum of 1.0 mol% Er{sub 2}O{sub 3} doped glass and are in turn used to calculate radiative properties for the important luminescent levels of Er{sup 3+} ions. The studied glasses show intense green and weak red visible emissions under 365 nm excitation. The decrease in visible emission intensities with concentration of Er{sup 3+} ions has been explained due to energy transfer processes between Er{sup 3+} ions. Upon excitation at 980 nm laser diode, an intense 1.53 μm NIR emission has been observed with the maximum full width at half maximum (FWHM) for Er{sup 3+}-doped oxyfluoride glasses. The higher Er{sup 3+} ion doping capability and relatively high gain and broad emission at 1.5 μm are the most notable features of these glasses to realize efficient short-length optical amplifiers.

36 MATERIALS SCIENCE↗