Search NASA⌕ Search

SEARCH · Search NASA

Results for “atomic force microscopy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,783 records · Page 99

AFe{sub 2}O{sub 4}/(Pb{sub 0.80}Sr{sub 0.20})TiO{sub 3} (A = Mn, Ni and Co): a New Room-Temperature Magnetoelectric Multiferroic Bi-layered Composite Films

The room temperature and magnetic field-dependent dielectric, impedance and magnetoelectric (ME) coupling effect of polycrystalline AFe{sub 2}O{sub 4}/(Pb{sub 0.80}Sr{sub 0.20})TiO{sub 3} (A = Mn, Ni and Co) bi-layered composite films have been investigated. The structural and microstructural analyses using the X-ray diffraction (XRD), atomic force microscopy (AFM) and scanning electron microscopy (SEM) reveal the presence of homogenous growth of both tetragonal and spinel phases without any extra phase and diffusion in the AFO/PST20 bi-layered composite films. Our results show that all composite films exhibit ferroelectric as well as considerable magnetic, indicating magnetoelectric coupling effect. Our results show that the dielectric and impedance properties of AFO/PST20 bi-layered composite films can be manipulated by the magnetic field at room temperature, also indicating the existence of magnetoelectric coupling. The impedance (Z{sup ′} and Z{sup ″}) Nyquist plots show distinct electrical responses with the magnetic field. The maximum magnetoelectric coefficient (α) is found to be α{sub ME}∼ 239 and ∼ 195 mV/cm/Oe for the MFO/PST20 and CFO/PST20 bi-layered composite films, respectively. The above results show that the AFO/PST20 bi-layered composite films are room-temperature multiferroic material that can be potentially used in magnetoelectric devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of thermal annealing on the structural, optical and dielectrical properties of P3HT:PC{sub 70}BM nanocomposites

Highlights: • A typical structure of ITO/PEDOT: PSS/P3HT: PC{sub 70}BM/Al was fabricated. • Charge carrier diffusion and recombination have been calculated. • AFM and optical results show that thermal annealing promotes the phase separation. • The annealing process improves the transport of charges. - Abstract: The effect of thermal annealing on the optical, structural and the dielectric properties of P3HT:PC{sub 70}BM blended films were investigated. By means of atomic force microscopy, we observed the morphology evolution of the annealed P3HT:PC{sub 70}BM nanocomposites. Raman spectroscopy showed a substantial ordering in the polymer film after annealing. The absorption spectra of the annealed P3HT:PC{sub 70}BM films were improved and red shifted than un-annealed samples. The results indicate that the P3HT in the nanocomposite becomes an ordered structure with annealing. The ordered P3HT facilitates the charge transport. From the photoluminescence measurements, the formation of polymer crystallites was observed upon annealing. Thus, the device efficiency reaches 2.2% after annealing at 150 °C. Impedance spectroscopy shows the classical complex plan curves; the low frequency is related to the effective lifetime of charge carriers and the high frequency corresponds to the diffusion time of these carriers. Global mobilities are in the range 3.8–4.6 × 10{sup −3} cm{sup 2} V{sup −1} s{sup −1}.

36 MATERIALS SCIENCE↗

XPS and AFM Study of GaAs Surface Treatment

Obtaining smooth and atomically clean surfaces is an important step in the preparation of a surface for device manufacturing. In this work different processes are evaluated for cleaning a GaAs surface. A good surface cleaning treatment is that which provides a high level of uniformity and controllability of the surface. Different techniques are useful as cleaning treatments depending on the growth process to be used. The goal is to remove the oxygen and carbon contaminants and then form a thin oxide film to protect the surface, which is easy to remove later with thermal desorption mechanism like molecular beam epitaxy (MBE) with minimal impact to the surface. In this study, atomic force microscopy (AFM), x-ray photoelectron spectroscopy (XPS) and secondary ion mass spectrometry (SIMS) were used to characterize the structure of the surface, the composition, as well as detect oxygen and carbon contaminant on the GaAs surface. This study consists in two parts. The first part the surface was subjected to different chemical treatments. The chemical solutions were: (a)H{sub 2}SO{sub 4}:H{sub 2}O{sub 2}:H{sub 2}O(4:1:100), (b) HCl: H{sub 2}O(1:3), (c)NH{sub 4}OH 29%. The treatments (a) and (b) reduced the oxygen on the surface. Treatment (c) reduces carbon contamination. In the second part we made MOS devices on the surfaces treated. They were characterized by CV and IV electrical measurements. They show frequency dispersion.

36 MATERIALS SCIENCE↗

Nucleation of diindenoperylene and pentacene at thermal and hyperthermal incident kinetic energies

The authors have examined the nucleation of diindenoperylene (DIP) on SiO{sub 2} employing primarily atomic force microscopy and focusing on the effect of incident kinetic energy employing both thermal and supersonic sources. For all incident kinetic energies examined (E{sub i} = 0.09–11.3 eV), the nucleation of DIP is homogeneous and the dependence of the maximum island density on the growth rate is described by a power law. A critical nucleus of approximately two molecules is implicated by our data. A re-examination of the nucleation of pentacene on SiO{sub 2} gives the same major result that the maximum island density is determined by the growth rate, and it is independent of the incident kinetic energy. These observations are readily understood by factoring in the size of the critical nucleus in each case, and the island density, which indicates that diffusive transport of molecules to the growing islands dominate the dynamics of growth in the submonolayer regime.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effects of the lateral ordering of self-assembled SiGe nanoislands grown on strained Si{sub 1-x}Ge{sub x} buffer layers

Atomic-force microscopy, micro-Raman spectroscopy, and high resolution X-ray diffraction are applied to study the spatial ordering in single layers of SiGe nanoislands grown on a strained Si{sub 1-x}Ge{sub x} buffer sublayer. It is shown that, apart from stimulating the spatial ordering of nanoislands, the introduction of a Si{sub 1-x}Ge{sub x} sublayer leads to an enhanced role for interdiffusion processes. An unusually high increase in the volume of nanoislands in the process of the epitaxy is related to the anomalously strong diffusion from the buffer sublayer into the islands that is induced by nonuniform fields of elastic strains. The anisotropy of the islands shape and spatial ordering is discussed in terms of the anisotropy of the diffusion processes in spatially nonuniform fields of elastic strains.

36 MATERIALS SCIENCE↗

Plasticity mechanism for copper extrusion in through-silicon vias for three-dimensional interconnects

In this paper, we demonstrated the plasticity mechanism for copper (Cu) extrusion in through-silicon via structures under thermal cycling. The local plasticity was directly observed by synchrotron x-ray micro-diffraction near the top of the via with the amount increasing with the peak temperature. The Cu extrusion was confirmed by Atomic Force Microscopy (AFM) measurements and found to be consistent with the observed Cu plasticity behavior. A simple analytical model elucidated the role of plasticity during thermal cycling, and finite element analyses were carried out to confirm the plasticity mechanism as well as the effect of the via/Si interface. The model predictions were able to account for the via extrusions observed in two types of experiments, with one representing a nearly free sliding interface and the other a strongly bonded interface. Interestingly, the AFM extrusion profiles seemed to contour with the local grain structures near the top of the via, suggesting that the grain structure not only affects the yield strength of the Cu and thus its plasticity but could also be important in controlling the pop-up behavior and the statistics for a large ensemble of vias.

36 MATERIALS SCIENCE↗

Magnetization in Nanocrystalline PLD Zinc Ferrite Thin Films Deposited on Fused Quartz Substrate

The nanocrystalline zinc ferrite (ZnFe{sub 2}O{sub 4}) thin films were grown on the fused quartz substrate using pulsed laser deposition. The effects of atmospheric conditions on structural, magnetic, and morphological properties have been systematically studied using X-ray diffraction, vibrating sample magnetometry, and atomic force microscopy. The films showed textured growth of zinc ferrite for the substrate temperatures at ≥ 600 °C irrespective of the ambient environment. Interestingly, thin films of zinc ferrite showed a magnetic hysteresis loop in contrast to the paramagnetic nature of their bulk counterpart. The value of saturation magnetization (4πM{sub s}) increased from 130 to 360 G when the substrate temperature was increased from room temperature (RT) to 800 °C in the oxygen atmosphere. In the absence of oxygen pressure, the value of 4πM{sub s} is observed to be 330 G for the film deposited at RT and found to increase to a value of 670 G when the film is deposited at 400 °C and the maximum value of 2580 G is observed for the film deposited at 700 °C. However, the value of 4πM{sub s} of 800 °C dropped down to 2000 G.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Estradiol influences the mechanical properties of human fetal osteoblasts through cytoskeletal changes

Highlights: Black-Right-Pointing-Pointer Estradiol induced stiffness changes of osteoblasts were quantified using AFM. Black-Right-Pointing-Pointer Estradiol causes significant decrease in the stiffness of osteoblasts. Black-Right-Pointing-Pointer Decreased stiffness was caused by decreased density of f-actin network. Black-Right-Pointing-Pointer Stiffness changes were not associated with mineralized matrix of osteoblasts. Black-Right-Pointing-Pointer Estradiol increases inherent alkaline phosphatase activity of osteoblasts. -- Abstract: Estrogen is known to have a direct effect on bone forming osteoblasts and bone resorbing osteoclasts. The cellular and molecular effects of estrogen on osteoblasts and osteoblasts-like cells have been extensively studied. However, the effect of estrogen on the mechanical property of osteoblasts has not been studied yet. It is important since mechanical property of the mechanosensory osteoblasts could be pivotal to its functionality in bone remodeling. This is the first study aimed to assess the direct effect of estradiol on the apparent elastic modulus (E{sup Asterisk-Operator }) and corresponding cytoskeletal changes of human fetal osteoblasts (hFOB 1.19). The cells were cultured in either medium alone or medium supplemented with {beta}-estradiol and then subjected to Atomic Force Microscopy indentation (AFM) to determine E{sup Asterisk-Operator }. The underlying changes in cytoskeleton were studied by staining the cells with TRITC-Phalloidin. Following estradiol treatment, the cells were also tested for proliferation, alkaline phosphatase activity and mineralization. With estradiol treatment, E{sup Asterisk-Operator} of osteoblasts significantly decreased by 43-46%. The confocal images showed that the changes in f-actin network observed in estradiol treated cells can give rise to the changes in the stiffness of the cells. Estradiol also increases the inherent alkaline phosphatase activity of the cells. Estradiol induced stiffness changes of osteoblasts were not associated with changes in the synthesized mineralized matrix of the cells. Thus, a decrease in osteoblast stiffness with estrogen treatment was demonstrated in this study, with positive links to cytoskeletal changes. The estradiol associated changes in osteoblast mechanical properties could bear implications for bone remodeling and its mechanical integrity.

60 APPLIED LIFE SCIENCES↗

Alkyl Surface Treatments of Planar Zinc Oxide in Hybrid Organic/Inorganic Solar Cells

Hybrid organic/inorganic solar cells have not lived up to their potential because of poor interface properties. Interfacial molecular layers provide a way of adjusting these devices to improve their performance. We have studied a prototypical system involving poly(3-hexylthiophene) (P3HT) on planar zinc oxide (ZnO) films that have been modified with two types of molecules having identical 18-carbon alkyl chain termination and different surface attachments: octadecanethiol (ODT) and octadecyltriethoxysilane (OTES). We examined the functionalized surfaces using water contact angle measurements, Kelvin probe measurements, infrared absorbance spectroscopy, and atomic force microscopy. These have shown that OTES forms disordered incomplete monolayers, while ODT is prone to develop multilayered islands. Both treatments enhance polymer ordering. However, inverted solar cell devices fabricated with these treated interfaces performed very differently. ODT improves the short circuit current (J{sub SC}), open circuit voltage (V{sub OC}), and power conversion efficiency ({eta}), while these parameters all decrease in devices constructed from OTES-treated ZnO. The differences in V{sub OC} are related to modifications of the surface dipole associated with deposition of the two types of alkyl molecules, while changes in J{sub SC} are attributed to a balance between charge transfer blocking caused by the saturated hydrocarbon and the improved hole mobility in the polymer.

14 SOLAR ENERGY↗

The energetic basis for hydroxyapatite mineralization by amelogenin variants provides insights into the origin ofamelogenesis imperfecta

Small variations in the primary amino acid sequence of extracellular matrix proteins can have profound effects on the biomineralization of hard tissues. For example, a change in one amino acid within the amelogenin protein can lead to drastic changes in enamel phenotype, resulting in amelogenesis imperfecta, enamel that is defective and easily damaged. Despite the importance of these undesirable phenotypes, there is very little understanding of how single amino acid variation in amelogenins can lead to malformed enamel. Here, we aim to develop a thermodynamic understanding of how protein variants can affect steps of the biomineralization process. High-resolution, in situ atomic force microscopy (AFM) showed that altering one amino acid within the murine amelogenin sequence (natural variants T21 and P41T, and experimental variant P71T) resulted in an increase in the quantity of protein adsorbed onto hydroxyapatite (HAP) and the formation of multiple protein layers. Quantitative analysis of the equilibrium adsorbate amounts revealed that the protein variants had higher oligomer–oligomer binding energies. MMP20 enzyme degradation and HAP mineralization studies showed that the amino acid variants slowed the degradation of amelogenin by MMP20 and inhibited the growth and phase transformation of HAP. We propose that the protein variants cause malformed enamel because they bind excessively to HAP and disrupt the normal HAP growth and enzymatic degradation processes. The in situ methods applied to determine the energetics of molecular level processes are powerful tools toward understanding the mechanisms of biomineralization.

59 BASIC BIOLOGICAL SCIENCES↗

Growth and characterization of homoepitaxial β-Ga 2 O 3 layers

ß-Ga 2 O 3 is a next-generation ultra-wide bandgap semiconductor (E g = 4.8 eV to 4.9 eV) that can be homoepitaxially grown on commercial substrates, enabling next-generation power electronic devices among other important applications. Analyzing the quality of deposited homoepitaxial layers used in such devices is challenging, in part due to the large probing depth in traditional x-ray diffraction (XRD) and also due to the surface-sensitive nature of atomic force microscopy (AFM). Here, a combination of evanescent grazing-incidence skew asymmetric XRD and AFM are investigated as an approach to effectively characterize the quality of homoepitaxial ß-Ga 2 O 3 layers grown by molecular beam epitaxy at a variety of Ga/O flux ratios. Accounting for both structure and morphology, optimal films are achieved at a Ga/O ratio of ~1.15, a conclusion that would not be possible to achieve by either XRD or AFM methods alone. Finally, fabricated Schottky barrier diodes with thicker homoepitaxial layers are characterized by J-V and C-V measurements, revealing an unintentional doping density of 4.3×10 16 cm -3 - 2×10 17 cm -3 in the epilayer. These results demonstrate the importance of complementary measurement methods for improving the quality of the ß-Ga 2 O 3 homoepitaxial layers used in power electronic and other devices.

36 MATERIALS SCIENCE↗

AFM Microcantilever With a Collocated AlN Sensor-Actuator Pair: Enabling Efficient Q-Control for Dynamic Imaging

This manuscript presents a novel microcantilever with an embedded piezoelectric sensor-actuator pair for dynamic atomic force microscopy (AFM). The transducer pair is constructed from a two-layered AlN stack. Stacking the piezoelectric transducers in this manner leads to a minimal feedthrough from actuation to sense electrode, granting a high dynamic range frequency response for dynamic mode AFM. The cantilever's design allows for dual mode operation at 1 st and 2 nd resonance modes. High resolution tapping mode imaging results are reported, while the cantilever is operated at these modes. A feedback control loop is used to modify quality factor of the 1 st mode of the cantilever, using a positive position feedback (PPF) controller. Here, a faster response time is achieved by reducing the Q-factor, enabling the cantilever to track the topography at a higher scan rate. Results of bimodal AFM imaging are reported, using amplitude changes of the 1 st mode for surface topography, while material properties are encoded in phase changes of the 2 nd mode.

47 OTHER INSTRUMENTATION↗

Structure of Protein Layers in Polyelectrolyte Matrices Studied by Neutron Reflectivity

Polyelectrolyte multilayer films obtained by localized incorporation of Green Fluorescent Protein (GFP) within electrostatically assembled matrices of poly(styrene sulfonate)/poly(allylamine hydrochloride) (PSS/PAH) via spin-assisted layer-by-layer growth were discovered to be highly structured, with closely packed monomolecular layers of the protein within the bio-hybrid films. The structure of the films was evaluated in both vertical and lateral directions with neutron reflectometry, using deuterated GFP as a marker for neutron scattering contrast. Importantly, the GFP preserves its structural stability upon assembly as confirmed by circular dichroism (CD) and in situ attenuated total reflection Fourier Transform Infrared spectroscopy (ATR-FTIR). Atomic force microscopy was complimented with X-ray reflectometry to characterize the external roughness of the biohybrid films. Remarkably, films assembled with a single GFP layer confined at various distances from the substrate exhibit a strong localization of the GFP layer without intermixing into the LbL matrix. However, partial intermixing of the GFP layers with polymeric material is evidenced in multiple-GFP layer films with alternating protein-rich and protein-deficient regions. We hypothesize that the polymer-protein exchange observed in the multiple-GFP layer films suggests the existence of a critical protein concentration which can be accommodated by the multilayer matrix. Our results yield new insights into the mechanism of GFP interaction with a polyelectrolyte matrix and open opportunities for fabrication of bio-hybrid films with well-organized structure and controllable function, a crucial requirement for advanced sensing applications.

59 BASIC BIOLOGICAL SCIENCES↗

Characterization of high-{kappa} LaLuO{sub 3} thin film grown on AlGaN/GaN heterostructure by molecular beam deposition

We report the study of high-dielectric-constant (high-{kappa}) dielectric LaLuO{sub 3} (LLO) thin film that is grown on AlGaN/GaN heterostructure by molecular beam deposition (MBD). The physical properties of LLO on AlGaN/GaN heterostrucure have been investigated with atomic force microscopy, x-ray photoelectron spectroscopy, and TEM. It is revealed that the MBD-grown 16 nm-thick LLO film is polycrystalline with a thin ({approx}2 nm) amorphous transition layer at the LLO/GaN interface. The bandgap of LLO is derived as 5.3 {+-} 0.04 eV from O1s energy loss spectrum. Capacitance-voltage (C-V) characteristics of a Ni-Au/LLO/III-nitride metal-insulator-semiconductor diode exhibit small frequency dispersion (<2%) and reveal a high effective dielectric constant of {approx}28 for the LLO film. The LLO layer is shown to be effective in suppressing the reverse and forward leakage current in the MIS diode. In particular, the MIS diode forward current is reduced by 7 orders of magnitude at a forward bias of 1 V compared to a conventional Ni-Au/III-nitride Schottky diode.

36 MATERIALS SCIENCE↗

Influence of the interface on the magnetic properties of ferromagnetic ultrathin films with various adjacent copper thicknesses

The interface and magnetic properties of two series of films with Ta(5 nm)/Fe{sub 20}Ni{sub 80}Nd{sub 0.017}(3 nm)/Cu(t nm) and Ta(5 nm)/Cu(t nm)/Fe{sub 50}Co{sub 50}Gd{sub 0.07}(3 nm)/Cu(2 nm) structures have been investigated by atomic force microscopy, vibrating sample magnetometer, and ferromagnetic resonance (FMR). The roughness of all films increases with increasing copper thickness, which causes the different grain sizes in the surface of films. The coercivity of FeCo-Gd films increases with increasing thickness of inserted Cu layer while decreases with increasing thickness of Cu capping layer for FeNi-Nd films. FMR linewidth exhibits huge dependence on the thickness of inserted Cu layer for FeCo-Gd films, increasing from 2270 to 3680 Oe, which comes from the additional contribution of effect of the two-magnon scattering. And the thickness of Cu capping layer shows also an influence on FMR linewidth of FeNi-Nd films, increasing from 190 to 320 Oe, which mainly comes from intrinsic FMR linewidth and plus minor inhomogeneous broadening. All of these extrinsic linewidth broadening are related to the interface roughness.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Replicated mask surface roughness effects on EUV lithographic pattering and line edge roughness

To quantify the roughness contributions to speckle, a programmed roughness substrate was fabricated with a number of areas having different roughness magnitudes. The substrate was then multilayer coated. Atomic force microscopy (AFM) surface maps were collected before and after multilayer deposition. At-wavelength reflectance and total integrated scattering measurements were also completed. Angle resolved scattering based power spectral densities are directly compared to the AFM based power spectra. We show that AFM overpredicts the roughness in the picometer measurements range. The mask was then imaged at-wavelength for the direct characterization of the aerial image speckle using the SEMATECH Berkeley Actinic Inspection Tool (AIT). Modeling was used to test the effectiveness of the different metrologies in predicting the measured aerial-image speckle. AIT measured contrast values are 25% or more than the calculated image contrast values obtained using the measured rms roughness input. The extent to which the various metrologies can be utilized for specifying tolerable roughness limits on EUV masks is still to be determined. Further modeling and measurements are being planned.

36 MATERIALS SCIENCE↗