Search NASA⌕ Search

SEARCH · Search NASA

Results for “complex oxide”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,783 records · Page 99

Solid Acid Fuel Cell Stack for APU Applications

Solid acid fuel cell technology affords the opportunity to operate at the 200-300 degree centigrade regime that would allow for more fuel flexibility, compared to polymer electrode membrane fuel cell, while avoiding the relatively more expensive and complex system components required by solid oxide fuel cell. This project addresses many factors such as MEA size scalability, fuel robustness, stability, etc., that are essential for successful commercialization of the technology.

08 HYDROGEN↗

Structure of the neutral upper atmosphere of Mars - Results from Viking 1 and Viking 2

Neutral mass spectrometers carried on the aeroshells of Viking 1 and Viking 2 indicate that carbon dioxide is the major constituent of the Martian atmosphere over the height range 120 to 200 kilometers. The atmosphere contains detectable concentrations of nitrogen, argon, carbon monoxide, molecular oxygen, atomic oxygen, and nitric oxide. The upper atmosphere exhibits a complex and variable thermal structure and is well mixed to heights in excess of 120 kilometers.

Nier, A. O.↗

Mineralogical aspects of terrestrial weathering effects in chondrites from Allan Hills, Antarctica

The work reported here represents a first attempt at comparing the mineralogical aspects of weathering effects in selected Antarctic chondrites with those present in a petrologically similar chondrite which was weathered in the Arizona desert. The methods of analysis employed include X-ray diffractometry, differential thermal analysis, and reflectance spectrophotometry. It is found that the dominant weathering products in the rocks are complex, multiple-phase, hydrous ferric oxides which formed by alteration of Ni-Fe metal and sulfide particles under the influence of liquid water. The Fe-oxide weathering products may comprise approximately 15-20 wt % of the most intensely weathered samples although the same samples contain not more than 5% goethite as the only well-crystallized hydrous ferric oxide.

Gooding, J. L.↗

Overview of 10 inch Diameter HTPB Hybrid Motor Testing with Liquid Oxygen at Stennis Space Center

To further explore the operation of hybrid rocket motors and to demonstrate the performance characteristics of the motor design Lockheed Martin funded research on a series of 10 inch diameter hybrid motors that produce less than 10 klbf sea level thrust. This test series was given the name "Hybrid Technology Test Program." These motors were fired in the existing test stand at the SSC E-3 complex Cell 1. The fuel and oxidizer for these 10 inch diameter motors are HTPB and LO2, respectively. The original goal of the testing was to verify that the predicted performance matched the actual performance of these 10 inch motors (ref. figure 1) and then confirm that the motors performed acceptably. For this element of testing horizontally fired hybrid motors will be tested using LO2 supplied from the existing facility 100 gallon LO2 tank that is pressurized with facility GN2. The thrust produced by the motor will be measured by a Lockheed Martin supplied load cell.

Knowles, Timothy E.↗

Vibrational Assignments of Six-Coordinate Ferrous Heme Nitrosyls: New Insight From Nuclear Resonance Vibrational Spectroscopy

This Communication addresses a long-standing problem: the exact vibrational assignments of the low-energy modes of the Fe-N-O subunit in six-coordinate ferrous heme nitrosyl model complexes. This problem is addressed using nuclear resonance vibrational spectroscopy (NRVS) coupled to {sup 15}N{sup 18}O isotope labeling and detailed simulations of the obtained data. Two isotope-sensitive features are identified at 437 and 563 cm{sup -1}. Normal coordinate analysis shows that the 437 cm{sup -1} mode corresponds to the Fe-NO stretch, whereas the 563 cm{sup -1} band is identified with the Fe-N-O bend. The relative NRVS intensities of these features determine the degree of vibrational mixing between the stretch and the bend. The implications of these results are discussed with respect to the trans effect of imidazole on the bound NO. In addition, a comparison to myoglobin-NO (Mb-NO) is made to determine the effect of the Mb active site pocket on the bound NO.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Direct Transformation of SiH 4 to a Molecular L(H) 2 Co=Si=Co(H) 2 L Silicide Complex

The synthesis of bimetallic molecular silicide complexes is reported, based on the use of multiple Si–H bond activations in SiH 4 at the metal centers of 14-electron LCo I fragments (L = Tp", HB(3,5-diisopropylpyrazolyl) 3 – ; [BP 2 tBu Pz], PhB(CH 2 P t Bu 2 ) 2 (pyrazolyl)). Upon exposure of (Tp"Co) 2 (μ-N 2 ) (1) to SiH 4 , a mixture of (Tp"Co) 2 (μ-H) (2) and (Tp"Co) 2 (μ-H) 2 (3) was formed and no evidence for Si–H oxidative addition products was observed. In contrast, [BP 2 tBu Pz]-supported Co complexes led to Si–H oxidative additions with the generation of silylene and silicide complexes as products. Notably, the reaction of ([BP 2 tBu Pz]Co) 2 (μ-N 2 ) (5) with SiH 4 gave the dicobalt silicide complex [BP 2 tBu Pz](H) 2 Co=Si=Co(H) 2 [BP 2 tBu Pz] (8) in high yield, representing the first direct route to a symmetrical bimetallic silicide. Here, the effect of the [BP 2 tBu Pz] ligand on Co–Si bonding in 7 and 8 was explored by analysis of solid-state molecular structures and density functional theory (DFT) investigations. Upon exposure to CO or DMAP (DMAP = 4-dimethylaminopyridine), 8 converted to the corresponding [BP 2 tBu Pz]Co(L) x adducts (L = CO, x = 2; L = DMAP, x = 1) with concomitant loss of SiH 4 , despite the lack of significant Si–H interactions in the starting complex. On heating to 60 °C, 8 underwent reaction with MeCl to produce small quantities of Me x SiH 4–x (x = 1–3), demonstrating functionalization of the μ-silicon atom in a molecular silicide to form organosilanes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Enhanced strength and ductility in a high-entropy alloy via ordered oxygen complexes

Oxygen, one of the most abundant elements on Earth, often forms an undesired interstitial impurity or ceramic phase (such as an oxide particle) in metallic materials. Even when it adds strength, oxygen doping renders metals brittle. Here, in this study, we show that oxygen can take the form of ordered oxygen complexes, a state in between oxide particles and frequently occurring random interstitials. Unlike traditional interstitial strengthening, such ordered interstitial complexes lead to unprecedented enhancement in both strength and ductility in compositionally complex solid solutions, the so-called high-entropy alloys (HEAs). The tensile strength is enhanced (by 48.5 ± 1.8 per cent) and ductility is substantially improved (by 95.2 ± 8.1 per cent) when doping a model TiZrHfNb HEA with 2.0 atomic per cent oxygen, thus breaking the long-standing strength–ductility trade-off. The oxygen complexes are ordered nanoscale regions within the HEA characterized by (O, Zr, Ti)-rich atomic complexes whose formation is promoted by the existence of chemical short-range ordering among some of the substitutional matrix elements in the HEAs. Carbon has been reported to improve strength and ductility simultaneously in face-centred cubic HEAs, by lowering the stacking fault energy and increasing the lattice friction stress. By contrast, the ordered interstitial complexes described here change the dislocation shear mode from planar slip to wavy slip, and promote double cross-slip and thus dislocation multiplication through the formation of Frank–Read sources (a mechanism explaining the generation of multiple dislocations) during deformation. This ordered interstitial complex-mediated strain-hardening mechanism should be particularly useful in Ti-, Zr- and Hf-containing alloys, in which interstitial elements are highly undesirable owing to their embrittlement effects, and in alloys where tuning the stacking fault energy and exploiting athermal transformations do not lead to property enhancement. These results provide insight into the role of interstitial solid solutions and associated ordering strengthening mechanisms in metallic materials.

Lei, Zhifeng↗

Exploring gasoline oxidation chemistry in jet stirred reactors

Recent decades have seen increasingly restrictive regulations applied to gasoline engines. Gasoline combustion chemistry must be investigated to achieve a better understanding and control of internal combustion engine efficiency and emissions. In this work, several gasoline fuels, namely the FACE (Fuel for Advanced Combustion Engines) gasolines, were selected as targets for oxidation study in jet-stirred reactors (JSR). The study is facilitated by formulating various gasoline surrogate mixtures with known hydrocarbon compositions to represent the real gasolines. Surrogates included binary mixtures of n-heptane and iso-octane, as well as more complex multi-component mixtures. Here, the oxidation characteristics of FACE gasolines and their surrogates were experimentally examined in JSR-1 and numerically simulated under the following conditions: pressure 1 bar, temperature 500–1050 K, residence time 1.0 and 2.0 s, and two equivalence ratios (Φ= 0.5 and 1.0). In the high temperature region, all real fuels and surrogates showed similar oxidation behavior, but in the low temperature region, a fuel’s octane number and composition had a significant effect on its JSR oxidation characteristics. Low octane number fuels displayed more low temperature reactivity, while fuels with similar octane number but a larger number of n-alkane components were more reactive. A gasoline surrogate kinetic model was examined with FACE gasoline experiments either measured in JSR-2, or taken from previous work under the following conditions: pressure 10 bar, temperature 530–1200 K, residence time 0.7 s, and three equivalence ratios (Φ = 0.5, 1.0 and 2.0). Comparison between FACE gasoline experimental results with surrogate model predictions showed good agreement, demonstrating considerable potential for surrogate fuel kinetic modeling in engine simulations.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Understanding Nitrate Chemistry - The Key to Safer and More Efficient TRU Waste Acceptance - 19618

Investigations into the Waste Isolation Pilot Plant (WIPP) radiological release from a transuranic (TRU) waste drum concluded that the event was initiated by a thermal runaway, principally involving interactions between the polysaccharide-based kitty litter and nitric acid, which released radiological material along with hot gases and combustible materials from the drum. In this paper, the hazards of polysaccharides present as either starch based kitty litter or cellulose rags in a TRU waste drum exposed to nitric acid (and by extension metal nitrate salts) have been evaluated, based on considerations of how complex nitrogen redox cycles carry out the aqueous phase oxidation of alcohols and related organic functional groups. These exothermic reactions, coupled with a positive feedback loop inherent to nitrogen redox chemistry, can initiate an autocatalytic thermal runaway and explosive gas generation, which poses the most significant risk under ambient conditions where acidic solution may be present (in small quantities as free liquid or sorbed within a solid matrix). Nitric acid is an extremely potent oxidant but is itself remarkably inert, rarely interacting directly with oxidizable substrates and instead exerting its vast potential energy through lower oxidation state reactants such as nitrogen dioxide and nitrous acid that are generated from its slow self-decomposition. Nitrous acid is the reactant that carries out substrate oxidation, and systems that are not pre-loaded with nitrous acid will experience an induction period before significant reactivity commences. Under oxidizing fuel-lean conditions, nitrogen dioxide may induce autocatalytic nitrous acid formation, which may supplement additional side-reactions, potentially leading to thermal runaway. Therefore, the system is most vulnerable at the end of an induction period. Metal nitrate salts promote this ambient temperature solution chemistry (cf. traditional oxidizer properties of metal nitrate salts, which operate in the solid state at elevated temperatures) by releasing nitric acid into the system via hydrolysis. Unlike simple alcohols with a single hydroxyl functional group, the chemistry of polymeric carbohydrates (polysaccharides) such as starches and cellulose is more diverse. Therefore, the oxidation of the simple monomeric carbohydrate glucose is first examined to provide insight into the analogous reactivity with polysaccharides. Although less reactive than alcohols by virtue of extensive hydrogen bonding, carbohydrates are oxidized by nitric acid through the same fundamental mechanisms, complicated by a variety of competing side reactions including acid-catalyzed hydrolytic depolymerization to more reactive (ultimately monomeric) units, as well as other degradation reactions promoted by radical mechanisms. For this reason, polysaccharides such as starches that are more susceptible to hydrolysis are more reactive than cellulose, with the attendant microbial population in starch based kitty litter adding a special aspect of reactivity. From this safety evaluation, a bounding latency period has been developed beyond which a stored TRU waste drum that contains polysaccharides (starch based kitty litter excluded) commingled with nitric acid and/or metal nitrate salts may no longer present a hazard under ambient conditions, based on a compilation of induction periods and reaction times involving nitric acid with various oxidizable substrates under a variety of conditions from synthetic procedures, tests, and adverse incident scenarios. By obviating the need for costly treatment options or characterization, a better understanding of nitrate redox chemistry and the hazards it presents with polysaccharide oxidation thus provides a more efficient means to safely dispose of TRU waste generated within the Department of Energy (DOE) complex. (author)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

High manganese redox variability and manganate predominance in temperate soil profiles as determined by X-ray absorption spectroscopy

Manganese speciation is a key to understanding the fate of contaminants, nutrients, and organic matter in soils. To date, quantification of Mn species in bulk soils has been performed mainly by sequential extraction methods and rarely supported by spectroscopic analysis. In order to obtain quantitative information on the Mn species inventory of soils, we investigated 46 soil horizons (<2-mm fraction, 45.1–2,280 mg/kg Mn) of nine typical Central European soils (Cambisols, Chernozems, Luvisols, Podzol, Stagnosol) by chemical Mn analyses and Mn K-edge X-ray absorption spectroscopy, and related speciation results to major soil properties. Amounts of Mn 2+ , Mn 3+ , and Mn 4+ and the average oxidation state of Mn were evaluated by linear combination fitting (LCF) of X-ray absorption near edge structure (XANES) spectra. Additionally, we used extended X-ray absorption fine structure (EXAFS) spectroscopy to identify and quantify major Mn species. For this, EXAFS spectra of 20 organic and mineral soil samples from five soils (Cambisols, Chernozem, Luvisol) were analyzed by LCF and shell fitting. XANES analyses revealed a high Mn redox variability in organic surface layers, with Mn 2+ being most abundant (≤100%, $\overline{x}$ = 54%), followed by Mn 3+ (≤80%, $\overline{x}$ = 32%) and Mn 4+ (≤55%, $\overline{x}$ = 14%). Mineral soil horizons contained significantly less Mn 2+ (≤56%, $\overline{x}$ = 23%), about equal quantities of Mn 3+ (≤68%, $\overline{x}$ = 31%), and were enriched in Mn 4+ (≤89%, $\overline{x}$ = 46%). EXAFS analyses implied the presence of six major Mn species groups: manganates, organically complexed Mn, Mn(III) oxyhydroxides, silicate-bound Mn, Mn oxides without tunnel- or layer structure, and physisorbed Mn. In litter horizons, Mn was mainly present in organic complexes (58–91%, $\overline{x}$ = 78%) and as physisorbed Mn (≤15%), but individual horizons also comprised manganates, Mn(III) oxyhydroxides, and silicate-bound Mn. Manganates, likely mixtures of phyllomanganates with hexagonal layer symmetry and tectomanganates, dominated in all mineral soil horizons (37–94%, $\overline{x}$ = 67%). Correlation analysis showed that manganates dissolve completely during dithionite-citrate and acid ammonium oxalate extractions, and suggested that Mn 4+ -rich manganates preferentially form under less acidic soil conditions, partly by oxidation of organically complexed Mn(II), and that they are enriched in the soil clay fraction. Mineral soil horizons also contained minor quantities of organically complexed Mn (≤39%, $\overline{x}$ = 11%), silicate-bound Mn (≤30%, $\overline{x}$ = 8%), Mn(III) oxyhydroxides (≤37%, $\overline{x}$ = 7%), Mn oxides without tunnel- or layer structure (≤18%, $\overline{x}$ = 5%), and physisorbed Mn (≤14%, $\overline{x}$ <1%). The detection of Mn(III) oxyhydroxides such as feitknechtite (β-MnOOH) or groutite (α-MnOOH) as well as the spinel hausmannite (Mn 3 O 4 ) in acidic soils is remarkable, since their formation is normally linked to neutral or alkaline pH conditions. Minor contributions of silicate-bound Mn indicate the release of Mn from primary minerals already at early stages of soil formation, and low concentrations of physisorbed Mn suggest that exchangeable Mn is rapidly converted into manganates in oxic soils. In conclusion, the predominance of manganates in mineral soils has far-reaching implications for the functioning of soils and biogeochemical element cycles, as these minerals play an important role in metal binding, plant nutrition, and redox-related processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Importance of Electron Correlation on the Geometry and Electronic Structure of [2Fe–2S] Systems: A Benchmark Study of the [Fe 2 S 2 (SCH 3 ) 4 ] 2–,3–,4– , [Fe 2 S 2 (SCys) 4 ] 2– , [Fe 2 S 2 (S- p -tol) 4 ] 2– , and [Fe 2 S 2 (S- o -xyl) 4 ] 2– Complexes

Iron–sulfur clusters are crucial for biological electron transport and catalysis. Obtaining accurate geometries, energetics, manifolds of their excited electronic states, and reduction energies is important to understand their role in these processes. Here, using a [2Fe–2S] model complex with Fe II and Fe III oxidation states, which leads to different charges, i.e., [Fe 2 S 2 (SMe) 4 ] 2–,3–,4– , we benchmarked a variety of computational methodologies ranging from density functional theory (DFT) to post-Hartree–Fock methods, including complete active space self-consistent field (CASSCF), multireference configuration interaction, the second-order N-electron valence state perturbation theory (NEVPT2), and the linearized integrand approximation of adiabatic connection (AC0) approaches. Additionally, we studied three experimentally well-characterized complexes, [Fe 2 S 2 (SCys) 4 ] 2– , [Fe 2 S 2 (S-o-tol) 4 ] 2– , and [Fe 2 S 2 (S-o-xyl) 4 ] 2– , via DFT methods. We conclude that the dynamic electron correlation is important for accurately predicting the geometry of these complexes. Broken symmetry (BS) DFT correctly predicts experimental geometries of low-spin multiplicity, while CASSCF does not. However, BS-DFT significantly overestimates the difference between the low- and high-spin electronic states for a given oxidation state. At the same time, CASSCF underestimates it but provides relative energies closer to the reference NEVPT2 results. Finally, AC0 provides energetics of NEVPT2 quality with the additional advantage of being able to use large CASSCF sizes. NEVPT2 gives the best estimates of the Fe III /Fe III → Fe II /Fe III (4.27 eV) and Fe II /F III → Fe II /F II (7.72 eV) reduction energies. The results provide insight into the electronic structure of these complexes and assist in the understanding of their physical properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Solid oxide fuel cell electrolytes produced by a combination of suspension plasma spray and very low pressure plasma spray.

Plasma spray coating techniques allow unique control of electrolyte microstructures and properties as well as facilitating deposition on complex surfaces. This can enable significantly improved solid oxide fuel cells (SOFCs), including non-planar designs. SOFCs are promising because they directly convert the oxidization of fuel into electrical energy. However, electrolytes deposited using conventional plasma spray are porous and often greater than 50 microns thick. One solution to form dense, thin electrolytes of ideal composition for SOFCs is to combine suspension plasma spray (SPS) with very low pressure plasma spray (VLPPS). Increased compositional control is achieved due to dissolved dopant compounds in the suspension that are incorporated into the coating during plasma spraying. Thus, it is possible to change the chemistry of the feed stock during deposition. In the work reported, suspensions of sub-micron diameter 8 mol.% Y2O3-ZrO2 (YSZ) powders were sprayed on NiO-YSZ anodes at Sandia National Laboratories (SNL) Thermal Spray Research Laboratory (TSRL). These coatings were compared to the same suspensions doped with scandium nitrate at 3 to 8 mol%. The pressure in the chamber was 2.4 torr and the plasma was formed from a combination of argon and hydrogen gases. The resultant electrolytes were well adhered to the anode substrates and were approximately 10 microns thick. The microstructure of the resultant electrolytes will be reported as well as the electrolyte performance as part of a SOFC system via potentiodynamic testing and impedance spectroscopy.

08 HYDROGEN↗

In Situ Oxidation Studies of High-Entropy Alloy Nanoparticles

Although high-entropy alloys (HEAs) have shown tremendous potential for elevated temperature, anticorrosion, and catalysis applications, little is known on how HEA materials behave under complex service environments. Herein, we studied the high-temperature oxidation behavior of Fe 0.28 Co 0.21 Ni 0.20 Cu 0.08 Pt 0.23 HEA nanoparticles (NPs) in an atmospheric pressure dry air environment by in situ gas-cell transmission electron microscopy. It is found that the oxidation of HEA NPs is governed by Kirkendall effects with logarithmic oxidation rates rather than parabolic as predicted by Wagner's theory. Further, the HEA NPs are found to oxidize at a significantly slower rate compared to monometallic NPs. The outward diffusion of transition metals and formation of disordered oxide layer are observed in real time and confirmed through analytical energy dispersive spectroscopy, and electron energy loss spectroscopy characterizations. Localized ordered lattices are identified in the oxide, suggesting the formation of Fe 2 O 3 , CoO, NiO, and CuO crystallites in an overall disordered matrix. Hybrid Monte Carlo and molecular dynamics simulations based on first-principles energies and forces support these findings and show that the oxidation drives surface segregation of Fe, Co, Ni, and Cu, while Pt stays in the core region. The present work offers key insights into how HEA NPs behave under high-temperature oxidizing environment and sheds light on future design of highly stable alloys under complex service conditions.

36 MATERIALS SCIENCE↗

Note on Graphite Oxidation by Oxygen and Moisture

Simplified equations of graphite oxidation are reviewed for semi-infinite slab, finite slab, and cylinder geometries, using the principal assumptions of linearized oxidation kinetics and quasi-steady state oxidation profile. All equations are coupled to a general surface mass transfer boundary condition. The equations include those for oxidant concentration distribution, surface oxidation rate, burnoff profile, and oxidation efficiency. This review also covers some areas that may not be well recognized. The key role of the effective diffusivity is highlighted, with a brief review of measured values. The temperature-dependence of the surface oxidation rate is shown to be more complex than usually shown for the diffusion-affected zone. Assumption of linear kinetics permits ready estimation of equilibration time for development of the quasi-steady burnoff profile. In addition, approximations for the time-steady hydrogen concentration profiles are developed for the case of oxidation by H2O. All cited methods can be readily evaluated by spreadsheet calculation.

08 HYDROGEN↗

Modeling the degradation of Portland cement pastes by biogenic organic acids

Reactive transport models can be used to assess the long-term performance of cement-based materials subjected to biodegradation. A bioleaching test (with Aspergillus niger fungi) applied to ordinary Portland cement pastes during 15 months is modeled with HYTEC. Modeling indicates that the biogenic organic acids (acetic, butyric, lactic and oxalic) strongly accelerate hydrate dissolution by acidic hydrolysis whilst their complexation of aluminum has an effect on the secondary gel stability only. The deepest degradation front corresponds to portlandite dissolution and decalcification of calcium silicate hydrates. A complex pattern of sulfate phases dissolution and precipitation takes place in an intermediate zone. The outermost degraded zone consists of alumina and silica gels. The modeling accurateness of calcium leaching, pH evolution and degradation thickness is consistently enhanced whilst considering increase of diffusivity in the degraded zones. Precipitation of calcium oxalate is predicted by modeling but was hindered in the bioleaching reactor.

36 MATERIALS SCIENCE↗

Mononuclear gallium complexes with the redox-active dmp-bian ligand (dmp-bian is 1,2-bis[(2,6-dimethylphenyl)imino]acenaphthene): synthesis and reactions with alkynes

The direct reduction of 1,2-bis[(2,6-dimethylphenyl)imino]acenaphthene (dmp-bian (1)) with gallium metal in toluene affords the solvent-free bis-ligand complex [(dmp-bian){sub 2}Ga] (2), in which two diimine ligands are in different oxidation states (radical-anionic and dianionic). The addition of phenylacethylene to the Ga–N–C moiety of the dianionic ligand of compound 2 gives the complex [(dmp-bian)Ga(HC=CPh)(dmp-bian)] (3), in which new Ga–C and C–C bonds are formed. The reaction of 2 with hex-1-yne produces the gallium dialkynyl complex [(dmp-bian)Ga(C≡C–Bu){sub 2}] (4), with the metal atom bonded to the dmp-bian radical anion. Paramagnetic compounds 2–4 were characterized by ESR spectroscopy and X-ray diffraction. The known compound dmp-bian was structurally characterized for the first time.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Probing the Framework Metal Dependent Properties of Actinide-Centered Polyoxoalkoxide Sandwich-Type Complexes

Development of a simple and scalable synthesis of (TBA) 3 [W 5 O 18 MoNO] provides for the formation of the mixed-metal lacunary polyoxoalkoxide, (TBA) 2 [W 4 O 13 (OMe) 4 MoNO][Na(MeOH)]. This complex was used to synthesize a series of polyoxoalkoxide sandwich-type complexes with the general formula (TBA) 2 [M{W 4 O 13 (OMe) 4 MoNO} 2 ], where M = Zr(IV), Hf(IV), Th(IV), U(IV), and Np(IV). Compared to the analogous all-molybdenum complexes, the series have drastically different optical and redox properties. The results indicate that framework metal substitution acts as a tool for “orbital engineering”, with Density Functional Theory (DFT) calculations revealing that the major consequence of incorporation of tungsten into the complexes is localization of LUMO and LUMO+1 on the molybdenum centers remaining in the molecule. The change in the distribution of the frontier orbitals translates to discrepancies in the electronic properties of the series. Given the rarity of polyoxometalate complexes featuring a U(V) ion, one electron oxidation of (TBA) 2 [U(IV){W 4 O 13 (OMe) 4 MoNO} 2 ] was pursued. Isolation of the corresponding U(V) centered sandwich-type complex is reported, only the second example of U(V)-polyoxometalate complex described to date.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Supercritical Water Oxidation (SCWO) for the treatment of spacecraft waste.

Supercritical water oxidation (SCWO) is a powerful waste treatment that has been considered as a substitute or complement to other potential spacecraft waste handling methods including jettisoning, compacted sealed storage, drying, and others. Combustible trash and garbage is mixed with water and then heated and pressurized above the critical point of water (705 °F and 218 atmospheres). The waste is nearly all oxidized to produce carbon dioxide, water and nitrogen. NOx is not formed. The combustion energy can be used to heat the input stream. SCWO is relatively complex, expensive, and hazardous compared to other methods. Oxidation of compounds containing chlorine and sulfur produces hydrochloric and sulfuric acid which can cause corrosion in the reactor. Neutralizing these acids produces salts which can precipitate and cause clogging. The major engineering challenges to implementing SCWO are chemical corrosion and fouling due to the deposition of salts. SCWO was first proposed for general waste treatment and for spacecraft in the 1980’s and extensive research has been carried out.

Harry W Jones↗