Search NASA⌕ Search

SEARCH · Search NASA

Results for “condition based monitoring”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,783 records · Page 99

A metabolic cage for the hindlimb suspended rat

Hindlimb suspension has been successfully used to simulate the effects of microgravity in rats. The cage and suspension system developed by E. R. Holton is designed to produce a headward shift of fluid and unload the hindlimbs in rodents, causing changes in bone and muscle similar to those in animals and humans exposed to spaceflight. While the Holton suspension system simulates many of the conditions observed in the spaceflight animal, it does not provide for the collection of urine and feces needed to monitor some metabolic activities. As a result, only limited information has been gathered on the nutritional status, and the gastrointestinal and renal function of animals using that model. Although commercial metabolic cages are available, they are usually cylindrical and require a centrally located suspension system and thus, do not readily permit movement of the rats. The limited floor space of commercial cages may affect comparisons with studies using the Holton model which has more than twice the living space of most commercially available cages. To take advantage of the extra living space and extensive data base that has been developed with the Holton model, Holton's cage was modified to make urine and fecal collections possible.

Evans, J.↗

Wildlife Densities and Habitat Use Across Temporal and Spatial Scales on the Mid-Atlantic Outer Continental Shelf. Final Report to the Department of Energy EERE Wind & Water Power Technologies Office

The Mid-Atlantic Baseline Studies Project helped address environmental barriers to offshore wind energy development in the mid-Atlantic region by providing regulators, developers, and other stakeholders with comprehensive baseline ecological data and analyses. Project funders and collaborators from a range of academic institutions, non-governmental organizations, federal agencies, foundations, and private companies came together to study bird, sea turtle, and marine mammal distributions, densities, and movements on the mid-Atlantic Outer Continental Shelf between 2012 and 2014. Specific project activities and goals included the following: (1) Conduct standardized surveys to quantify bird, sea turtle, and marine mammal densities seasonally and annually throughout the study region and identify important habitat use or aggregation areas. (2) Develop statistical models to help understand the drivers of wildlife distribution and abundance patterns. (3) Use individual tracking data for several focal bird species to provide information on population connectivity and individual movements that is complementary to survey data. (4) Identify species that are likely to be exposed to offshore wind energy development activities in the mid-Atlantic study area. (5) Develop U.S.-based technological resources and assessment methods for future monitoring efforts, including a comparison of high resolution digital video aerial surveys to boat-based surveys. (6) Help meet data needs associated with National Environmental Policy Act (NEPA), Marine Mammal Protection Act, and Endangered Species Act requirements, by contributing several years of data and analysis towards future Environmental Impact Statements. This report consists of six parts: Project overview (executive summary and Chapters 1-2); Examining wildlife distributions and relative abundance from a digital video aerial survey platform (Chapters 3-6); Examining wildlife distributions and abundance using boat-based surveys (Chapters 7-12); Integrating data across survey platforms (Chapters 13-19); Individual movements and habitat use for focal bird species (Chapters 20-25); and Nocturnal avian migration monitoring (Chapters 26-27). Boat-based and digital video aerial surveys each had specific advantages and disadvantages, but were largely complementary (Chapters 1, 5, 13-14). Digital aerial surveys were particularly useful for covering offshore areas at broad scales, where general distributions of taxonomic groups were a priority; boat surveys could provide more detailed data on species identities and behaviors, but were more limited in geographic scope due to their slower survey pace. The mid-Atlantic study area was important for wintering and breeding taxa, and its location also made it a key migratory corridor. There was considerable variation in species composition and spatial patterns by season, largely driven by dynamic environmental conditions (Chapters 12, 15, and 20-22). Habitat gradients in nearshore waters, however, were reliable influences on productivity and patterns of species distributions and abundance. Areas within about 30-40 km of the coast offshore of the mouths of Chesapeake and Delaware Bays, as well as to the south of Delaware Bay along the coast, were consistent hotspots of abundance and species diversity, regardless of survey methodology or analytical approach (Chapters 2, 12, 17). Inter-annual variation was substantial, and the importance of certain environmental variables in predicting animal distributions indicates that these species may well respond to future environmental shifts brought about by anthropogenic effects and climatic change. This study is an important first step, however, towards understanding how bird, marine mammal, and sea turtle populations in the mid-Atlantic may be exposed to offshore wind energy development and other anthropogenic activities. The results of this study provide insight to help address environmental permitting requirements for current and future offshore development projects, and serve as a starting point for more site-specific studies, risk analyses, and evaluation of potential measures to avoid and minimize those risks.

17 WIND ENERGY↗

DOE Bioenergy Technologies Office (BETO) 2023 Project Peer Review: WBS 2.4.1.100 Bench Scale Research & Development

Bench Scale Integration develops and optimizes fermentation processes to produce bio-based fuels and chemicals for commercial scale-up. The project uses fermentation science to achieve high titers and production rates by, for example, manipulating how the microorganisms are fed biomass sugars and nutrients, modifying fermentation conditions (pH, temperature, aeration) or developing online control strategies for better fermentation operations and high titer, rates, and yield (TRY). For this period of performance, we continued our development of a commercial-ready 2,3-butanediol (BDO) fermentation from biomass sugars utilizing NREL's proprietary Zymomonas mobilis microorganism. The engineered Z. mobilis can use all the main sugars in corn stover biomass, which are glucose, xylose, and arabinose. BDO is a versatile, low-carbon chemical which can be catalytically upgraded to a variety of hydrocarbon fuels and chemicals. The project had three goals during this review period; evaluate the technical feasibility of using whole slurry pretreated corn stover to achieve the techno-economic analysis (TEA) performance goals, continue optimizing a liquor-based fed-batch fermentation process for high titer, and develop strategies to enable scale-up. After evaluating different iterations of a whole slurry fermentation that did not meet the TEA goals, a Go/No-Go decision was made to pivot to liquor-only with new TEA performance targets, the main one being 140 g/L titer. We successfully met this goal, producing 141 g/L BDO at 1 g/L-hr productivity and 84% process yield. This titer and productivity attracted industrial interest to scale the fermentation resulting in a Technology Commercialization Fund project award in 2022. We used an NREL developed near-infra red (NIR) spectroscopy method for rapid analysis which allowed for changes to aeration levels and sugar feeding during the fermentation to maximize BDO production. The NIR analysis can be done using a hand-held spectrometer, essentially taking the analysis on to the plant floor during scale-up and preliminary work shows the feasibility of using an online probe for continuous monitoring and control. The other scale-up tool is mapping oxygen transfer coefficient (kLa) and oxygen transfer rate (OTR) in various vessels to find conditions that match the optimized 500 mL vessels. Showing a correlation to the mapping work, which is done with water and a dissolved oxygen probe, can reduce the risk of failed fermentations during scale-up. Our end-of-project goal is to meet the design target BDO titer (140-150 g/L) from DMR corn stover liquor at 1000L or larger scale to demonstrate BDO process design case and transfer the technology to industrial fermentation stakeholders for commercialization.

2 3-butanediol↗

Calculation of neutron and gamma fluxes in support to the interpretation of measuring devices irradiated in the core periphery of the OSIRIS Material Testing Reactor

Technological irradiations carried out in material testing reactors (MTRs) are used to study the behavior of materials under irradiation conditions required by different types of nuclear power plants (NPPs). For MTRs, specific instrumentation is required for the experiment monitoring and for the characterization of irradiation conditions, in particular the flux of neutrons and photons. To measure neutron and photon flux in experimental locations, different sensors can be used, such as SPNDs (self-powered neutron detectors), SPGDs (self-powered gamma detectors) and ionization chambers. These sensors involve interactions producing ultimately a measurable electric current. Various sensors have been recently tested in the core periphery of the OSIRIS reactor (located at the CEA-Saclay center) in order to qualify their responses to the neutron and the photon flux. One of the key input data for this qualification is to have a relevant evaluation of neutron and gamma fluxes at the irradiation location. The objective of this work is to evaluate the neutron and the gamma flux in the core periphery of the OSIRIS reactor. With this intention, specific neutron-photonic three-dimensional calculations have been performed and are mainly based on the TRIPOLI-4{sup R} three-dimensional continuous-energy Monte Carlo code, developed by CEA (Saclay Center) and extensively validated against reactor dosimetry benchmarks. In the case of the OSIRIS reactor, TRIPOLI-4{sup R} code has been validated against experimental results based on neutron flux and nuclear heating measurements performed in ex-core and in-core experiments. In this work, simultaneous contribution of neutrons and gamma photons in the core periphery is considered using neutron-photon coupled transport calculations. Contributions of prompt and decay photons have been taken into account for the gamma flux calculation. Specific depletion codes are used upstream to provide the decay-gamma sources required by TRIPOLI-4 calculations. In this paper, the neutron-photonic calculation scheme used for the neutron-gamma flux evaluation in the OSIRIS core periphery will be first detailed. Then, a comparison of calculated and measured values of neutron and gamma fluxes will be introduced. (author)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Solving k –SAT problems with generalized quantum measurement

We generalize the projection–based quantum measurement–driven k –SAT algorithm of Benjamin, Zhao, and Fitzsimons to arbitrary strength quantum measurements, including the limit of continuous monitoring. In doing so, we clarify that this algorithm is a particular case of the measurement–driven quantum control strategy elsewhere referred to as “Zeno dragging”. We argue that the algorithm is most efficient with finite time and measurement resources in the continuum limit, where measurements have an infinitesimal strength and duration. Moreover, for solvable k -SAT problems, the dynamics generated by the algorithm converge deterministically towards target dynamics in the long–time (Zeno) limit, implying that the algorithm can successfully operate autonomously via Lindblad dissipation, without detection. We subsequently study both the conditional and unconditional dynamics of the algorithm implemented via generalized measurements, quantifying the advantages of detection for heralding errors. These strategies are investigated first in a computationally–trivial 2-qubit 2-SAT problem to build intuition, and then we consider the scaling of the algorithm on 3-SAT problems encoded with 4–10 qubits. We numerically investigate the scaling of 3-SAT with respect to algorithmic runtime and find that the optimized time to solution scales with qubit number n as λ n , where λ is slightly larger than $\sqrt{2}$ for unconditional dynamics and less than $\sqrt{2}$ for conditional dynamics. We assess the implications for using this analog measurement–driven approach to quantum computing in practice.

quantum information↗

Conceptual Design Report for the Xe-6/7/8 Experiment in the NE Flux Trap

X energy, LLC has initiated conceptual design of a high-temperature, pebble-bed reactor and requested that Idaho National Laboratory evaluate the feasibility of irradiating several fuel pebbles in the Advanced Test Reactor. The proposed fuel for the X energy reactor utilizes the same tristructural-isotropic coated fuel particles as are used in the Department of Energy-sponsored Advanced Gas Reactor (AGR) fuel tests, which have been irradiated in the ATR since 2006. The X energy test has been denoted XE 6/7/8 based on nomenclature from the AGR fuel-test series. Three tests will be combined into one test train: XE 6 constitutes the fuel qualification test, whose aim is to demonstrate fuel performance at the upper end of prototypical reactor conditions; XE 7 is designated a “margin test,” and its purpose is to demonstrate fuel integrity at conditions substantially beyond reactor operating conditions; and XE 8 incorporates designed-to-fail particles in order to release fission products and help validate fission product release codes. The XE series of experiments would consist of multiple separate capsules that would be irradiated simultaneously. Each capsule would have its own inert sweep-gas atmosphere with individual on line temperature monitoring. The sweep-gas effluent from each capsule would also have online fission product monitoring to track performance of the fuel in each individual capsule during irradiation.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Local Radiation Shielding Design Methodology

The NSLS-II accelerators are housed within a radiation enclosure of normal concrete (and in some places high density concrete) that has been designed to reduce the radiation generated from an assumed operational beam loss or bulk shielding current (BCS) from each accelerator. The beam loss model used to estimate the thickness of this bulk shielding, assumed a beam energy at the expected operating energy and a current loss based on reasonable assumptions for the fraction of the expected operating current. The thickness of the shield was determined to be the amount required to reduce the radiation outside the shield to a maximum dose rate of <0.5mrem/hr. for occupied areas for these normal operational losses. These assumed beam losses and the bulk shielding thicknesses required are given in reference. Abnormal operating conditions generating higher than normal beam losses must also be considered, and additional engineering controls will be required depending on the magnitude of the radiation levels generated during the abnormal condition. Additional local shielding subject to configuration control may be utilized to reduce radiation levels associated with these abnormal loss conditions. Interlocked area radiation monitors are another means to prevent continued operation with higher than an acceptable level. The NSLS-II Shielding Policy requires that an engineered system be utilized to mitigate an abnormal condition producing radiation levels greater than 100 mR/h, and that two systems are required if the projected radiation levels during a fault condition are > 2000 mR/h. It is intended that shielding limits the dose rate to < 0.5 mR/h in occupied areas for normal operational losses, and the combination of administrative and engineered controls for abnormal losses will maintain radiation exposure to trained personnel working at the NSLS-II facility to as low as reasonably achievable. It is anticipated that all individual exposures will be well within the planned administrative control level of 100mrem/year.

36 MATERIALS SCIENCE↗

Task 12 PV Sustainability - Human Health Risk Assessment Methods for PV, Part 3: Module Disposal Risks

End-of-life management is important for addressing large future photovoltaic (PV) waste volumes and conserving raw materials for use in new PV modules. In regions without regulatory mandates for PV recycling, end-of-life PV modules can be disposed in accordance with general waste laws. Given the use of various metals as raw materials in semiconductor compounds and electrical contacts in commercial PV modules, some stakeholders have raised concerns regarding potential environmental impacts if PV modules are subject to improper disposal instead of being recycled or disposed in sanitary landfills, as is required in most world regions. To evaluate these concerns, screening-level risk assessment methods are developed herein that evaluate potential human health risks from groundwater and surface (air, soil, surface water) exposure pathways. The methods estimate potential impacts from disposal of end-of-life (EOL) PV modules in non-sanitary landfills under the following worst-case conditions: no leachate collection or groundwater monitoring, no liner for preventing leachate migration, uncovered waste, and lack of stormwater management. Examining worst-case conditions allows the exploration of maximum potential risk to attempt to ensure disposal does not increase health risk above regulatory thresholds. Specifically, this report presents an analysis of potential human health risks associated with non-sanitary landfill disposal for three PV technologies, focusing on release of the highest-prioritized chemical element for each: lead (Pb) in crystalline-silicon (c-Si) PV modules, cadmium (Cd) in thin film cadmium telluride (CdTe) PV modules, and selenium (Se) in thin film copper indium selenide (CIS) PV modules. The prioritization of these chemical elements for analysis is based on stakeholder interest. Because the methodology is chemical-specific, the risk assessment results for these chemicals cannot be directly generalized to other chemicals, although the risk assessment methodology can be applied to other chemicals. If the chemicals chosen are indeed the ones presenting greatest risk, then the results herein should represent the upper bound of health risk from exposure to a single constituent.

14 SOLAR ENERGY↗

Shared Knowledge for Decision-making on Environment and Health Issues in the Arctic

This paper will describe a remote sensing and GIs-based system to bring indigenous traditional knowledge together with contemporary scientific knowledge to address impacts resulting from changes in climate, environment, weather and pollution in the Arctic. As scientists and policy-makers from both indigenous and non-indigenous communities continue to build closer partnerships to address common sustainability issues such as the health impacts of climate change and anthropogenic activities, it becomes increasingly important to create shared information management systems which integrate all relevant factors for optimal information sharing and decision-making. This system is being designed to bring together remotely sensed, indigenous and other data and observations for analysis, measuring, and monitoring parameters of interest (e.g., snow cover, rainfall, temperature, ice conditions, vegetation, infrastructure, fires). A description of the system and its components as well as a preliminary application of the system in the Arctic will be presented.

Maynard, Nancy G.↗

NASA’s Student Airborne Science Activation for Minority Serving Institutions: Inaugural Program, Educational Outcomes, and Lessons Learned

The NASA Student Airborne Science Activation (SaSa) for Minority Serving Institutions (MSIs) held its inaugural summer research program for early career undergraduates interested in the Geosciences. SaSa is a NASA Science Activation funded 8-week summer internship program. Twenty-four first- and second-year undergraduates from MSIs across the U.S. participated in the summer program - June 6 to July 29, 2022. Students had the opportunity to gain hands-on research experience in all components of an airborne science campaign including flying on-board a NASA research aircraft to collect atmospheric measurements. Students conducted independent research projects related to the atmosphere, ocean, and geosciences that feed into NASA’s broader Earth Science Division’s and Decadal Survey goals using air quality, meteorological, and oceanic measurements from surface, airborne, and satellite-based observations. The program split its time between partner institution, University of Maryland Baltimore County and NASA’s Wallops Flight Facility in Wallops Island, Virginia. Students also made site visits at partner institutions, including: Hampton University, University of Maryland Eastern Shore, Morgan State University, Howard University, and Coppin State University and attended lectures from visiting faculty and NASA Subject Matter Experts. Students were guided on their research projects by near-peer graduate mentors, SaSa program leadership, co-Is at partner institutions, and NASA scientists to address two major research themes: 1) how human-caused air pollution has human and environmental implications, and 2) how large-scale meteorological factors influence local weather conditions. Students sorted into research groups, based on sub-discipline areas in the Geosciences, including: “Clouds, Aerosols and Radiation”, “Meteorology and Planetary Boundary Layer”, “Air Quality: Particle Pollution and Trace Gases”, and “Air-Water-Land Interface”. Their research was presented as 3-minute lightning talks and in-person poster presentations at a close-out event at NASA Goddard Space Flight Center in Greenbelt, Maryland. The students’ inter- and trans-disciplinary research experiences centered in the use of multiple ground, airborne, and satellite remote sensing NASA Earth Science Division assets. Providing a unique experience aligned to recognize the societal benefits that NASA contributes in the areas of resource management, air quality monitoring and policy decisions, energy and weather predictions, and research on the Earth’s climate. The SaSa program aims to increase the number of students from MSIs that identify as underrepresented or underserved individuals in the Geosciences discipline, Earth System Science graduate programs, and the NASA workforce. A summary of the summer research program, educational, scientific, and programmatic outcomes, as well as lessons learned will be presented.

NASA↗

Neural Network Atmospheric Correction of Remote Sensing Imagery Over Water Using a Synthetic Dataset

Remote sensing atmospheric correction methods have primarily focused on imagery over land. However, accurate correction over water is important for monitoring and research of aquatic environments. More research in this area is ongoing, though one of the biggest challenges is enough quality data to develop and validate correction methods. This is especially true for neural network (NN) -based models which have shown promise in this area given enough quality data. To address this deficiency of data, we are leveraging a synthetic dataset produced by a model called SWIPE that uses radiative transfer modeling to simulate the atmospheric effects on water-leaving (WL) reflectance to estimate top-of-atmosphere (TOA) reflectance. This allows us to produce almost unlimited pairs of WL reflectance and corresponding TOA reflectance for model training across a variety of atmospheric conditions. We use two approaches for our atmospheric correction model. One uses a conditional variational autoencoder (VAE) to estimate a single WL reflectance value from a single TOA reflectance value. The second is based on a UNET architecture and estimates an array of WL reflectance values from an array of TOA reflectance values. The goal of the second method is to capture atmospheric effects that occur spatially between values within the array as compared to the first method.

deep learning↗

Long-Term Health Risk Quantification

Astronauts face hazards during spaceflight, including space radiation exposure, isolation and confinement, traveling far distances from Earth, reduced gravity levels, and closed and hostile environments. These hazards drive the definition of human health and performance risks associated with spaceflight. NASA’s Human System Risk Board maintains the human spaceflight risk posture for in-mission risks, as well as post-flight, Long-Term Health (LTH)risks potentially occurring later in the astronaut’s life. LTH risk encompasses the timeframe from immediately post-flight, through the rest of an astronaut’s career, through retirement, and until death. Possible LTH risk outcomes include the time and interventions needed for the astronaut to return to preflight physiological states after experiencing spaceflight hazards and recovery from any in-mission medical events that persist into the post-flight timeframe. It includes chronic complications that may arise due to experiencing in-flight medical conditions or injuries and medical conditions that occur later in life with a higher probability of occurrence or with more severity because of their spaceflight exposure. Finally, LTH risk outcomes can also include a reduction in life expectancy due to spaceflight exposures. There have been 144 medical conditions identified by NASA’s Lifetime Surveillance of Astronaut Health team to be associated with LTH risk. Epidemiological studies have been performed for some of these conditions to determine if astronauts suffer from an increased prevalence or severity of the condition due to their spaceflight experience compared to a comparable cohort .Differences in astronaut mortality or morbidity due to spaceflight experience were not detected in several of these studies. There were two cases where a modest increase in the incidence rate of astronaut LTH outcomes was detected. The first suggested an increase in the incidence of melanoma cases in astronauts, where the number of cases in astronauts were similar to the elevated number of cases observed in airplane pilots. The second provided some evidence of elevated numbers of cardiovascular disease events in astronauts compared to an appropriate healthy comparator cohort, which may warrant additional investigation. The lack of detection of LTH risk outcomes should not ease concerns about astronaut LTH. The studies highlighted here constitute only a small portion of the potential LTH conditions that could occur. Once epidemiological studies are performed on all conditions, significant findings may be detected. The analysis of astronaut LTH also suffers from limited numbers of data points because of the limited numbers of astronauts overall and the even fewer who have reached an age where LTH outcomes may begin to manifest. As shuttle and ISS astronauts begin to age and increase the feasibility of analysis, LTH outcomes may be detected. An application of risk quantification is the use of risk metrics within trade studies for resource prioritization and decision making. Trade studies regarding countermeasures to LTH risk outcomes would benefit from a quantification of LTH risk. NASA has ground-based processes in place such as astronaut screening and access to continuous medical monitoring and care during and after their astronaut career which are the main methods for mitigating LTH risk. In-mission countermeasures, such as acceptable levels of medical care and available countermeasures to counter spaceflight related physiological decrements, can mitigate a poor health and performance status immediately post-flight. Identifying appropriate risk metrics, obtaining valid quantities for them, and tying them to LTH countermeasures are necessary steps for realizing their use in trade studies. This presentation will highlight the challenges associated with the identification, quantification, and utilization of LTH risk metrics

Beth Lewandowski↗

Prognostics and Health Monitoring: Application to Electric Vehicles

As more and more electric vehicles emerge in our daily operation progressively, a very critical challenge lies in the prediction of remaining driving-time distance (for cars) or flying time-distance (for aircraft). This information is important, particularly in the case of unmanned vehicles, because such vehicles can become self-aware, autonomously compute its own capabilities, and identify how to best plan and successfully complete vehicular missions safely. In case of electric aircrafts, computing remaining flying time is also safety-critical, since an aircraft that runs out of power (battery charge) while in the air will eventually lose control leading to catastrophe. In order to tackle and solve the prediction problem, it is essential to have awareness of the current state and health of the system, especially since it is necessary to perform condition-based predictions. To be able to predict the future state of the system, it is also required to possess knowledge of the current and future operations of the vehicle.

Electric Vehicles↗

Local Radiation Shielding Design Methodology

The NSLS-II accelerators are housed within a radiation enclosure of normal concrete (and in some places high density concrete) that has been designed to reduce the radiation generated from an assumed operational beam loss or bulk shielding current (BCS) from each accelerator. The beam loss model used to estimate the thickness of this bulk shielding, assumed a beam energy at the expected operating energy and a current loss based on reasonable assumptions for the fraction of the expected operating current. The thickness of the shield was determined to be the amount required to reduce the radiation outside the shield to a maximum dose rate of <0.5mrem/hr. for occupied areas for these normal operational losses. These assumed beam losses and the bulk shielding thicknesses required are given in reference [1]. Abnormal operating conditions generating higher than normal beam losses must also be considered, and additional engineering controls will be required depending on the magnitude of the radiation levels generated during the abnormal condition. Additional local shielding subject to configuration control may be utilized to reduce radiation levels associated with these abnormal loss conditions. Interlocked area radiation monitors are another means to prevent continued operation with higher than an acceptable level. The NSLS-II Shielding Policy requires that an engineered system be utilized to mitigate an abnormal condition producing radiation levels greater than 100 mR/h, and that two systems are required if the projected radiation levels during a fault condition are > 2000 mR/h. It is intended that shielding limits the dose rate to < 0.5 mR/h in occupied areas for normal operational losses, and the combination of administrative and engineered controls for abnormal losses will maintain radiation exposure to trained personnel working at the NSLS-II facility to as low as reasonably achievable. It is anticipated that all individual exposures will be well within the planned administrative control level of 100mrem/year. This technical note presents the method used to identify these potential high beam loss locations, evaluate the potential radiation risk these losses create outside the enclosure shield and the design process that specifies the required local radiation shielding needed to reduce this risk below the maximum dose rate of the bulk shield design, listed above. If shielding can’t be adequately provided or if other fault initiated losses could occur, then the necessary engineering controls will be indicated that will limit the energy, current or duration of the beam transport that constitute this high beam loss risk.

36 MATERIALS SCIENCE↗

Improving the Freight Productivity of a Heavy-Duty, Battery Electric Truck by Intelligent Energy Management

This project aimed to enhance the range and reduce the operating costs of battery electric Class 8 trucks traveling over 250 miles daily. This was achieved through the development and implementation of an intelligent-Energy Management System (i-EMS) that leverages vehicle and operations data, physics-aware machine learning algorithms, and vehicle-to-cloud (V2C) connectivity. The project hypothesized that advanced machine learning algorithms and real-time data analytics could significantly improve the energy efficiency and range of these trucks. Key objectives included developing a physics-aware machine learning algorithm, implementing an i-EMS with V2C connectivity and physics-aware spatial data analytics (PSDA), and validating the system’s effectiveness with fleet partners HEB Companies and Murphy Logistics. Extensive data collection from vehicle operations, including vehicle characteristics, road conditions, and payload, was conducted. A machine learning algorithm was developed to predict energy consumption and enable proactive decision-making. The i-EMS was implemented on two Volvo VNR BEVs, with operators receiving charging and routing recommendations. Charging stations were installed at depot locations in Texas and Minnesota, with an additional on-route charger in Minnesota. Significant findings included a 14% range improvement for Murphy Logistics on a highway-driving eco-route and a 22% range improvement for HEB Companies on a city-driving eco-route. The i-EMS utilized rule-based methods and physics-based algorithms to predict and reduce energy consumption, with real-time monitoring and analysis through V2C connectivity enabling proactive decision-making. The project demonstrated the feasibility and economic viability of battery electric Class 8 trucks for long-haul operations, showcasing the potential of physics-aware machine learning in optimizing energy management. The successful implementation of the i-EMS in real-world scenarios validates its practical application and effectiveness, paving the way for the widespread adoption of battery electric vehicles in the freight transportation industry.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Application of Colorimetric Solid Phase Extraction (C-SPE) to Monitoring Nickel(II) and Lead(II) in Spacecraft Water Supplies

Archived water samples collected on the International Space Station (ISS) and returned to Earth for analysis have, in a few instances, contained trace levels of heavy metals. Building on our previous advances using Colorimetric Solid Phase Extraction (C-SPE) as a biocide monitoring technique, we are devising methods for the low level monitoring of nickel(II), lead(II) and other heavy metals. C-SPE is a sorption-spectrophotometric platform based on the extraction of analytes onto a membrane impregnated with a colorimetric reagent that are then quantified on the surface of the membrane using a diffuse reflectance spectrophotometer. Along these lines, we have determined nickel(II) via complexation with dimethylglyoxime (DMG) and begun to examine the analysis of lead(II) by its reaction with 2,5- dimercapto-1,3,4-thiadiazole (DMTD) and 4-(2- pyridylazo)-resorcinol (PAR). These developments are also extending a new variant of C-SPE in which immobilized reagents are being incorporated into this methodology in order to optimize sample reaction conditions and to introduce the colorimetric reagent. This paper describes the status of our development of these two new methods.

Diaz, Neil C.↗

Citizen Science: Potential New Opportunity for Consent-Based Siting Processes - 16608

Citizen science is a global phenomenon, as millions of volunteers are collecting, analyzing, and sharing data that contribute to scientific knowledge. Recognizing its potential, the U.S. 2013 Open Government National Action Plan encouraged Federal agencies to harness American ingenuity toward helping address a broad range of scientific and societal challenges, specifically invoking crowd-sourcing and citizen science. The October 2015 Plan reinforced this charge, calling on agencies to increase public participation through both means. Thus, citizen science opportunities are actively being sought across a wide range of Federal programs. Meanwhile, all nations with commercial nuclear reactors face the challenge of managing the spent nuclear fuel and high-level radioactive waste produced. Consent-based siting of facilities to manage these materials is considered an essential aspect of this shared challenge. A variety of other agency programs have illustrated the role citizens can play in strengthening engagement, empowerment, and scientific research. With these same themes important to planning for nuclear waste management, citizen science could represent a potential new opportunity for this national effort. Online resources were investigated to understand the nature and range of citizen science projects and seek insights for possible new applications. Results show that volunteers are contributing to research in areas from archaeology to zoology, and extending from the ocean floor to outer space. A large number of the collaborations involve characterizing local environmental conditions and monitoring changes over time. This paper highlights insights from several projects that illustrate the contributions citizen scientists can make to advance scientific knowledge and assist national and international programs. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Development and Validation of a Lifecycle-based Prognostics Architecture with Test Bed Validation

On-line monitoring and tracking of nuclear plant system and component degradation is being investigated as a method for improving the safety, reliability, and maintainability of aging nuclear power plants. Accurate prediction of the current degradation state of system components and structures is important for accurate estimates of their remaining useful life (RUL). The correct quantification and propagation of both the measurement uncertainty and model uncertainty is necessary for quantifying the uncertainty of the RUL prediction. This research project developed and validated methods to perform RUL estimation throughout the lifecycle of plant components. Prognostic methods should seamlessly operate from beginning of component life (BOL) to end of component life (EOL). We term this "Lifecycle Prognostics." When a component is put into use, the only information available may be past failure times of similar components used in similar conditions, and the predicted failure distribution can be estimated with reliability methods such as Weibull Analysis (Type I Prognostics). As the component operates, it begins to degrade and consume its available life. This life consumption may be a function of system stresses, and the failure distribution should be updated to account for the system operational stress levels (Type II Prognostics). When degradation becomes apparent, this information can be used to again improve the RUL estimate (Type III Prognostics). This research focused on developing prognostics algorithms for the three types of prognostics, developing uncertainty quantification methods for each of the algorithms, and, most importantly, developing a framework using Bayesian methods to transition between prognostic model types and update failure distribution estimates as new information becomes available. The developed methods were then validated on a range of accelerated degradation test beds. The ultimate goal of prognostics is to provide an accurate assessment for RUL predictions, with as little uncertainty as possible. From a reliability and maintenance standpoint, there would be improved safety by avoiding all failures. Calculated risk would decrease, saving money by avoiding unnecessary maintenance. One major bottleneck for data-driven prognostics is the availability of run-to-failure degradation data. Without enough degradation data leading to failure, prognostic models can yield RUL distributions with large uncertainty or mathematically unsound predictions. To address these issues a "Lifecycle Prognostics" method was developed to create RUL distributions from Beginning of Life (BOL) to End of Life (EOL). This employs established Type I, II, and III prognostic methods, and Bayesian transitioning between each Type. Bayesian methods, as opposed to classical frequency statistics, show how an expected value, a priori, changes with new data to form a posterior distribution. For example, when you purchase a component you have a prior belief, or estimation, of how long it will operate before failing. As you operate it, you may collect information related to its condition that will allow you to update your estimated failure time. Bayesian methods are best used when limited data are available. The use of a prior also means that information is conserved when new data are available. The weightings of the prior belief and information contained in the sampled data are dependent on the variance (uncertainty) of the prior, the variance (uncertainty) of the data, and the amount of measured data (number of samples). If the variance of the prior is small compared to the uncertainty of the data, the prior will be weighed more heavily. However, as more data are collected, the data will be weighted more heavily and will eventually swamp out the prior in calculating the posterior distribution of model parameters. Fundamentally Bayesian analysis updates a prior belief with new data to get a posterior belief. The general approach to applying the Bayesian method to lifecycle prognostics consisted of identifying the prior, which is the RUL estimate and uncertainty from the previous prognostics type, and combining it with observational data related to the newer prognostics type. The resulting lifecycle prognostics algorithm uses all available information throughout the component lifecycle.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗