Search NASA⌕ Search

SEARCH · Search NASA

Results for “conditional shift”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,783 records · Page 99

A COMPARISON OF GALAXY COUNTING TECHNIQUES IN SPECTROSCOPICALLY UNDERSAMPLED REGIONS

Accurate measures of galactic overdensities are invaluable for precision cosmology. Obtaining these measurements is complicated when members of one’s galaxy sample lack radial depths, most commonly derived via spectroscopic redshifts. In this paper, we utilize the Sloan Digital Sky Survey’s Main Galaxy Sample to compare seven methods of counting galaxies in cells when many of those galaxies lack redshifts. These methods fall into three categories: assigning galaxies discrete redshifts, scaling the numbers counted using regions’ spectroscopic completeness properties, and employing probabilistic techniques. We split spectroscopically undersampled regions into three types—those inside the spectroscopic footprint, those outside but adjacent to it, and those distant from it. Through Monte Carlo simulations, we demonstrate that the preferred counting techniques are a function of region type, cell size, and redshift. We conclude by reporting optimal counting strategies under a variety of conditions.

79 ASTRONOMY AND ASTROPHYSICS↗

K{sub α} x-ray imaging of laser-irradiated, limited-mass zirconium foils

X-ray fluorescence measurements to determine the effect of target heating on imaging efficiency, at a photon energy of 15.7 keV corresponding to the K{sub α} line of zirconium, have been carried out using limited-mass foils irradiated by the Texas Petawatt Laser. Zirconium foils that ranged in volume from 3000 × 3000 × 21 μm{sup 3} to 150 × 150 × 6 μm{sup 3} were irradiated with 100 J, 8 ps-long pulses and a mean intensity of 4 × 10{sup 19} W/cm{sup 2}. The K{sub α} emission was measured simultaneously using a highly ordered pyrolytic graphite crystal spectrometer and a curved quartz imaging crystal. The measured ratio of the integrated image signal to the integrated spectral signal was, within the experimental error, constant, indicating that the imaging efficiency's dependence on temperature is weak throughout the probed range. Based on our experience of target heating under similar conditions, we estimate a temperature of ∼200 eV for the smallest targets. The successful imaging of K{sub α} emission for temperatures this high represents an important proof of concept for Zr K{sub α} imaging. At these temperatures, the imaging of K{sub α} emission from lower-Z materials (such as Cu) is limited by temperature-dependent shifts in the K{sub α} emission energy.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Comparison of spontaneous emission in trapped-ion multiqubit gates at high magnetic fields

Penning traps have been used for performing quantum simulations and sensing with hundreds of ions and provide a promising route toward scaling up trapped ion quantum platforms because of the ability to trap and control hundreds or thousands of ions in two- and three-dimensional crystals. In both Penning traps and the more common RF Paul traps, lasers are often used to drive multi-qubit entangling operations. A leading source of decoherence in these operations is off resonant spontaneous emission. While many trapped ion quantum computers or simulators utilize clock qubits, other systems, especially those with high magnetic fields such as Penning traps, rely on Zeeman qubits, which require a more complex calculation of this decoherence. We therefore examine theoretically the impacts of spontaneous emission on quantum gates performed with trapped-ion ground state Zeeman qubits in a high magnetic field. In particular, we consider two types of gates—light-shift ($\hat{σ}^z_i$ $\hat{σ}^z_j$) gates and Mølmer-Sørensen ($\hat{σ}^x_i$ $\hat{σ}^x_j$) gates—obtained with laser beams directed approximately perpendicular to the magnetic field (the quantization axis) and compare the decoherence errors in each. Within each gate type, we also compare different operating points with regards to the detunings, polarizations, and required intensity of the laser beams used to drive the gates. Here, we show that both gates can have similar performance at their optimal operating conditions at high magnetic fields and examine the experimental feasibility of various operating points. By examining the magnetic field dependence of each gate, we demonstrate that, when the P state fine structure splitting is large compared to the Zeeman splittings, the theoretical performance of the Mølmer-Sørensen gate is significantly better than that of the light-shift gate. Additionally, for the light-shift gate, we make an approximate comparison between the fidelities that can be achieved at high fields with the fidelities of state-of-the-art two-qubit trapped ion quantum gates. We show that, with regards to spontaneous emission, the achievable fidelity of the current NIST configuration is about an order of magnitude below that of the best low-field gates, but we also discuss several alternative configurations with potential error rates that are comparable with those for state-of-the art trapped ion gates.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Synthesis of silica supported AuCu nanoparticle catalysts and the effects of pretreatment conditions for the CO oxidation reaction

The reaction of CH{sub 3}CHCl{sub 2} over the nearly-stoichiometric {alpha}-Cr{sub 2}O{sub 3} (10{bar 1} > 2) surface produces an ethylidene intermediate that yields primarily gas phase CH{sub 2} {double_bond} CH{sub 2} and surface chlorine adatoms; however, trace amounts of HC {triple_bond} CH, CH{sub 3}CH{sub 3}, H{sub 2} and CH{sub 3}CH {double_bond} CHCH{sub 3} are also observed. A rate-limiting intramolecular isomerization (2,1-hydrogen shift) in the surface ethylidene species produces gas phase CH{sub 2} {double_bond} CH{sub 2}. The chlorine freed from the dissociation of CH{sub 3}CHCl{sub 2} binds at the five-coordinate surface Cr{sup 3+} sites on the stoichiometric surface, completing the octahedral coordination sphere, and inhibits the surface chemistry by simple site blocking. No surface carbon deposition is observed from the thermal reaction of 1,1-dichloroethane under the conditions of this study, demonstrating that the ethylidene intermediate is not a primary coke forming intermediate over (10{bar 1} > 2) facets of {alpha}-Cr{sub 2}O{sub 3} under the conditions of this study.

01 COAL, LIGNITE, AND PEAT↗

Toward an international practical pressure scale: A proposal for an IPPS ruby gauge (IPPS-Ruby2020)

At the 26 th AIRAPT conference in 2017, a task group was formed to work on an International Practical Pressure Scale (IPPS). This report summarizes the activities of the task group toward an IPPS ruby gauge. We have selected three different approaches to establishing the relation between pressure ( P ) and ruby R1-line shift ( Δλ ) with three groups of optimal reference materials for applying these approaches. Using a polynomial form of the second order, the recommended ruby gauge (referred as Ruby2020) is expressed by: P [ G P a ] = 1.87 ( ± 0.01 ) × 10 3 Δ λ λ 0 1 + 5.63 ( ± 0.03 ) Δ λ λ 0 , where λ 0 is the wavelength of the R1-line near 694.25 nm at ambient condition. In June of 2020, the Executive Committee of AIRAPT endorsed the proposed Ruby2020. Finally, we encourage high-pressure practitioners to utilize Ruby2020 within its applicable pressure range (up to 150 GPa), so that pressure data can be directly compared across laboratories and amended consistently as better scales emerge in the future.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

IMPROVED CAPABILITIES FOR SITING WIND FARMS AND MITIGATING IMPACTS ON RADAR OBSERVATIONS

The development of efficient wind energy production involves challenges in technology and interoperability with other systems critical to the national mission. Wind turbines impact radar measurements as a result of their large reflectivity cross section as well as through the Doppler phase shift of their rotating blades. Wind farms can interfere with operational radar in multiple contexts, with degradation impacts on: weather detection such as tornado location, wind shear, and precipitation monitoring; tracking of airplanes where air traffic control software can lose the tracks of aircraft; and in identification of other low flying targets where a wind farm located close to a border might create a dead zone for detecting intruding objects. Objects in the path of an electromagnetic wave affect its propagation characteristics. This includes actual blockage of wave propagation by large individual objects and interference in wave continuity due to diffraction of the beam by individual or multiple objects. As an evolving industry, and the fastest growing segment of the energy sector, wind power is poised to make significant contributions in future energy generation requirements. The ability to develop comprehensive strategies for designing wind turbine locations that are mutually beneficial to both the wind industry that is dependent on production, and radar sites which the nation relies on, is critical to establishing reliable and secure wind energy. The mission needs of the Department of Homeland Security (DHS), Department of Defense (DOD), Federal Aviation Administration (FAA), and National Oceanographic and Atmospheric Administration (NOAA) dictate that the nation's radar systems remain uninhibited, to the maximum extent possible, by man-made obstructions; however, wind turbines can and do impact the surveillance footprint for monitoring airspace both for national defense as well as critical weather conditions which can impact life and property. As a result, a number of potential wind power locations have been contested on the basis of radar line of site. Radar line of site is dependent on local topography, and varies with atmospheric refractive index which is affected by weather and geographic conditions.

17 WIND ENERGY↗

Investigations of degradation and encapsulation of plastic scintillator

Studies have revealed that plastic scintillators such as polyvinyl toluene and polystyrene can undergo environmentally related material damage (“fogging”) that adversely affects detection performance under certain conditions and histories. A significant decrease in sensitivity has been seen in some gamma-ray detectors as they age as a result of this damage. Performance degradation due to such damage is characterized by a signal change from the detector, which shifts to lower energy, and ultimately a reduction in the ability to detect gamma radiation. This degradation is due to the permeation of water into the plastic, which can then cause temporary fogging and permanent damage to the material. As an example, a 1-mm thick barrier of high-density polyethylene with an area of 1 m 2 would allow 5 g per year of water transmission at 100% relative humidity. Thus, significant amounts of water can penetrate plastics over time and provide the potential for damage to the plastic. Such damage to plastic scintillator can cause problems for radiation detection applications in uncontrolled environments. Mitigation approaches that have been proposed to prevent damage to plastic scintillator include encapsulation of the plastic scintillator to prevent water intrusion that leads to damage during cold cycles. It is concluded that an encapsulation material with a moisture vapor transmission rate on the order of 10 -4 g∙m -2 ∙d -1 or better is needed for protecting large pieces of plastic scintillator from fogging over years of use. This article presents information on testing of bare and encapsulated plastic scintillator samples and on diagnostic approaches to measure the nature and progression of the fogging condition. It is shown that several encapsulation approaches fail to prevent water intrusion, while a couple methods can successfully encapsulate plastic and prevent water from penetrating the plastic and producing fogging.

36 MATERIALS SCIENCE↗

Raman spectroscopy of neutron irradiated silicon carbide: Correlation among Raman spectra, swelling, and irradiation temperature

The effects of neutron irradiation on microstructural evolution and the resultant changes in physical and mechanical properties are of critical importance for the development of silicon carbide (SiC) materials for nuclear applications. This study neutron–irradiated β–SiC under a wide range of conditions at temperatures between 235 and 750°C and neutron doses of 0.01–11.8 displacements per atom, and then evaluated the effects on the SiC structure using Raman spectroscopy. The SiC optical phonon lines were shifted to lower wavenumbers by irradiation. Correlations were found among the wavenumber of the longitudinal optical phonon line, irradiation–induced swelling, and irradiation temperature. The peak shift also correlated indirectly with decreasing thermal conductivity of irradiated SiC. The irradiation–induced peak shift is explained by combinations of lattice strain, reduction of the elastic modulus, and other factors including decreasing coherent domain size. Lastly, these findings bridge irradiation–induced microstructural changes and property changes and illustrate how Raman spectroscopy is a useful tool for nondestructively assessing irradiated SiC materials for nuclear applications.

36 MATERIALS SCIENCE↗

The Effects of Aerosols on Intense Convective Precipitation in the Northeastern U.S.

A fully coupled meteorology-chemistry-aerosol mesoscale model (WRF-Chem) is used to assess the effects of aerosols on intense convective precipitation over the northeastern United States. Numerical experiments are performed for three intense convective storm days and for two scenarios representing “typical” and “low” aerosol conditions. The results of the simulations suggest that increasing concentrations of aerosols can lead to either enhancement or suppression of precipitation. Quantification of the aerosol effect is sensitive to the metric used due to a shift of rainfall accumulation distribution when realistic aerosol concentrations are included in the simulations. Maximum rainfall accumulation amounts and areas with rainfall accumulations exceeding specified thresholds provide robust metrics of the aerosol effect on convective precipitation. Storms developing over areas with medium to low aerosol concentrations showed a suppression effect on rainfall independent of the meteorologic environment. Storms developing in areas of relatively high particulate concentrations showed enhancement of rainfall when there were simultaneous high values of CAPE, relative humidity and wind shear. In these cases, elevated aerosol concentrations resulted in stronger updrafts and downdrafts and more coherent organization of convection. For the extreme case, maximum rainfall accumulation differences exceeded 40 mm. The modeling results suggest that areas of the northeastern U.S. urban corridor that are close or downwind of intense sources of aerosols, could be more favorable for rainfall enhancement due to aerosols for the aerosol concentrations typical of this area.

54 ENVIRONMENTAL SCIENCES↗

Numerical solution of linear and nonlinear hyperbolic telegraph type equations with variable coefficients using shifted Jacobi collocation method

The telegraph equation is one of the important equations of mathematical physics. In this work, a spectral collocation scheme is proposed for the numerical solutions of one- and two-dimensional linear telegraph equations and telegraph equations with nonlinear forcing term. The homogeneous initial and boundary conditions are satisfied exactly by expanding the unknown variable using polynomial bases of functions which are built upon the Jacobi polynomials. The suggested scheme is successfully developed for the aforementioned problem with nonhomogeneous data. Extensive numerical experiments are presented to verify the efficiency of the proposed scheme.

97 MATHEMATICS AND COMPUTING↗

Contrasting diversity patterns of soil mites and nematodes in secondary succession

Soil biodiversity has been recognized as a key feature of ecosystem functioning and stability. However, soil biodiversity is strongly impaired by agriculture and relatively little is known on how and at what spatial and temporal scales soil biodiversity is restored after the human disturbances have come to an end. Here, a multi-scale approach was used to compare diversity patterns of soil mites and nematodes at four stages (early, mid, late, reference site) along a secondary succession chronosequence from abandoned arable land to heath land. In each field four soil samples were taken during four successive seasons. We determined soil diversity within samples ({alpha}-diversity), between samples ({beta}-diversity) and within field sites ({gamma}-diversity). The patterns of {alpha}- and {gamma}-diversity developed similarly along the chronosequence for oribatid mites, but not for nematodes. Nematode {alpha}-diversity was highest in mid- and late-successional sites, while {gamma}-diversity was constant along the chronosequence. Oribatid mite {beta}-diversity was initially high, but decreased thereafter, whereas nematode {beta}-diversity increased when succession proceeded; indicating that patterns of within-site heterogeneity diverged for oribatid mites and nematodes. The spatio-temporal diversity patterns after land abandonment suggest that oribatid mite community development depends predominantly on colonization of new taxa, whereas nematode community development depends on shifts in dominance patterns. This would imply that at old fields diversity patterns of oribatid mites are mainly controlled by dispersal, whereas diversity patterns of nematodes are mainly controlled by changing abiotic or biotic soil conditions. Our study shows that the restoration of soil biodiversity along secondary successional gradients can be both scale- and phylum-dependent.

54 ENVIRONMENTAL SCIENCES↗

Temperature measurement through detailed balance in X-ray Thomson scattering

The plasma conditions in isochorically heated beryllium are measured by x-ray Thomson scattering in the collective regime with a Cl Ly-{alpha} x-ray source at 2.96 keV. In addition to the down-shifted plasmon shape which provides electron density and temperature information, an up-shifted plasmon signal is observed allowing a model independent determination of the plasma temperature from the detailed balance relation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Ball-milled CuPc/TiO{sub 2} hybrid nanocomposite and its photocatalytic degradation of aqueous Rhodamine B

Graphical abstract: This work reports on the synthesis of hybrid composites of titanium dioxide and copper phthalocyanine via ball-milling assisted process in combination with mechanical mixing process. Their structural properties and photocatalytic degradation of aqueous RhB were investigated. The significant enhancement of the photocatalytic performance of the composite may be related to the charge recombination suppression guiding to the increase of free functional radicals participated in degradation process. Highlights: ► CuPc/TiO{sub 2} nanocomposite was synthesized by ball-milling assisted process and mechanical mixing method. ► Ball milling process can reduce CuPc size and assist the formation of well-dispersed composite. ► Loaded CuPc has inconsiderable influence on basic crystal structure of TiO{sub 2} matrix. ► The optical absorption properties of TiO{sub 2} in UV and visible light is improved with the existence of CuPc. ► CuPc/TiO{sub 2} nanocomposite can efficiently heighten the catalytic performance of TiO{sub 2} in the photodegradation of RhB. -- Abstract: Hybrid composites of titanium dioxide and copper phthalocyanine were synthesized by ball-milling assisted process in combination with mechanically stirring method. Structural properties of as-synthesized composites were characterized by X-ray diffraction (XRD), X-ray absorption fine structure (XANES) and scanning electron microscope (SEM). The optical absorbance of as-prepared composites and their photocatalytic activities were investigated by UV–vis spectroscopy. XRD and XANES results confirm that CuPc/TiO{sub 2} nanocomposite is still in the same structure of TiO{sub 2} and CuPc. SEM result reveals that the decreasing particle size of ball-milled CuPc has good dispersion on the surface of TiO{sub 2}. Absorptivity in UV region of the composites is heightened and shifted to visible light due to strong absorbance in blue-green spectrum of CuPc. The photocatalytic degradation of Rhodamine B dye solution using as-synthesized composites was investigated under ultraviolet irradiation. The optimized condition for RhB photodegradation was obtained for 1 wt.% CuPc/TiO{sub 2} nanocomposite with efficiency of 87.5% and reaction rate of 0.15 min{sup −1}. The significant improvement in photocatalytic activity of the hybrid composite may be associated to the enhancement of optical absorption and the inhibition of electron–hole recombination caused by the presence of CuPc in TiO{sub 2} matrix.

36 MATERIALS SCIENCE↗

Ternary Phosphides Ba M 2 P 2 : Tailoring Crystal and Electronic Structures Enables Highly Efficient HER Electrocatalysis

Binary transition metal phosphides and their solid solutions have emerged as promising hydrogen evolution reaction (HER) catalysts. Although many research endeavors have adopted strategies to vary compositions to optimize catalytic performance, they mainly focus on binary structures, which represent only a small fraction of the abundant phase space of structure types among transition metal phosphides. Here, the largely unexplored class of ternary and multinary ordered phosphides in catalysis comprises two or more metals with quite different chemical nature, concealing the structure–property relationships essential for advancing catalyst design. Here, we explored phosphides crystallizing in one of the most abundant ordered intermetallic structure types, —the ThCr 2 Si 2 type, —where square nets of 3d transition metal M and P atoms are separated by layers of electropositive Ba cations. Four ternary BaM 2 P 2 (M = Fe, Fe/Cu, Fe/Ni, Ni) catalysts were synthesized and characterized. BaNi 2 P 2 showed high HER activity in acidic electrolyte, which required an overpotential, η 10 , of only 62 mV to drive current density j = –10 mA/cm 2 and high stability with a potential drop rate of 0.25 mV/h. BaNi 2 P 2 outperformed other Ni-based catalysts, such as Ni 2 P and Ni 5 P 4 . Notably, at current densities above –170 mA/cm 2 , BaNi 2 P 2 outperformed the standard Pt electrode measured under identical conditions. Electronic structure analysis revealed a volcano-type activity trend among the four BaM 2 P 2 catalysts based on their d-band center positions, highlighting the role of electropositive Ba cations in shifting the Ni-3d orbitals into an optimal position.

BaNi2P2↗

Effects of Global and Regional Dust Storms on the Martian Hot O Corona and Photochemical Loss

Here, we examine for the first time the effects of both global and regional dust storms on the formation of the Martian hot O corona and associated photochemical loss of O. Our study is conducted by utilizing our integrated model framework, which couples our Martian hot O corona model with a multifluid magnetohydrodynamic model for Mars for the dusty and clear atmospheric condition cases. We present our results with the most up-to-date cross sections for the O( 3 P )-CO 2 collisions. The main effect of dust storms on the ionosphere is the upward shift of the ionosphere on the dayside, which results in an increase in production of hot O at all altitudes above the ionospheric peak. However, the dust-induced inflation of the neutral upper atmosphere results in an enhancement in collisional loss of hot O and thus effectively suppresses the hot O density, reducing the global photochemical loss rate by ~28% for the global dust storm scenario. The relative density structure of the hot O corona does not show any significant changes, while its magnitude decreases at all altitudes.

79 ASTRONOMY AND ASTROPHYSICS↗

Cobalt promotion of the InO x –TiO 2 heterojunction for dual photothermal reduction of CO 2

A series of cobalt-promoted indium–titanium composite oxides was synthesized using a microemulsion method. Their functional properties were investigated for the photothermal reduction of carbon dioxide. In this series, the indium content varied between 2.5 and 20%, while the cobalt percentage was kept constant at 4% throughout the series. In all cases, carbon monoxide formation occurred selectively through the reverse water gas shift reaction. The sample with 2.5% In maximized the synergistic use of the two energy sources, while the sample with 10% In showed the highest catalytic activity under both thermal and dual photo-thermo conditions. A physicochemical characterization was performed for all samples. The use of microscopy and X-ray absorption spectroscopy demonstrated that sub-nanometric indium entities, in combination with atomically dispersed cobalt oxide entities, achieved a balance between high thermal activity and significant synergy between light and heat in a catalytic process. The system with 10% indium is thus able to improve the thermal catalytic process through the use of light, providing an intensification procedure for the classic process.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Probing ultrafast shock-induced chemistry in liquids using broad-band mid-infrared absorption spectroscopy

We probe shock-induced chemistry in two organic liquids by measuring broadband, midinfrared absorption in the 800–1400 cm –1 frequency range. To test this new method and understand the signatures of chemical reactions in time resolved vibrational spectra, we compared liquid benzene shocked to unreactive conditions (shocked to a pressure of 18 GPa for a duration of 300 ps) to nitromethane under reactive conditions (25 GPa). We see clear signatures of shock-induced chemistry that are distinguishable from the pressure- and temperature-induced changes in vibrational mode shapes. While shocked benzene shows primarily a broadening and shifting of the vibrational modes, the nitromethane vibrational modes vanish once the shock wave enters the liquid and simultaneously, a spectrally broad feature appears that we interpret as the infrared spectrum of the complex mixture of product and intermediate species. To further interpret these measurements, we compare them to reactive quantum molecular dynamics simulations, which gives qualitatively consistent results. As a result, this work demonstrates a promising method for time resolving shock-induced chemistry, illustrating that chemical reactions produce distinct changes in the vibrational spectra.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗