Search NASA⌕ Search

SEARCH · Search NASA

Results for “density estimation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,783 records · Page 99

Extrusion Parameters for Foaming of a β-Glucan Concentrate

Plastics is a group of materials commonly encountered on a daily basis by many people. They have enabled rapid, low-cost manufacturing of products with complicated geometries and have contributed to the weight reduction of heavy components, especially when produced into a foamed structure. Despite the many advantages of plastics, some drawbacks such as the often fossil-based raw-material and the extensive littering of the material in nature, where it is not degraded for a very long time, needs to be dealt with. One way to address at least one of the issues could be to use polymers from nature instead of fossil-based ones. Here, a β-glucan concentrate originating from barley was investigated. The concentrate was processed into a foam by hot-melt extrusion, and the processing window was established. The effect of different blowing agents was also investigated. Water or a combination of water and sodium bicarbonate were used as blowing agents, the latter apparently giving a more uniform pore structure. The porous structure of the foamed materials was characterized mainly by using a combination of confocal laser scanning microscope and image analysis. The density of the samples was estimated and found to be in a similar range as some polyurethane foams. A set of 3D parameters were also quantified on two selected samples using X-ray microtomography in combination with image analysis, where it was indicated that the porous structure had a pre-determined direction, which followed the direction of the extrusion process.

36 MATERIALS SCIENCE↗

Nanostructural Characterization of the Fe{sub 3}O{sub 4}/ZnO Magnetic Nanocomposite as an Application in Medicine

In the present work, we synthesize Fe{sub 3}O{sub 4}/ZnO nanocomposite by sol-gel method using iron nitrate, ethylene glycol, zinc acetate dehydrate, and ammonium carbonate as precursors. Amorphous matrix and crystalline grains were formed in composite as well. The nanostructural properties of the nanocomposite were characterized by X-ray diffraction (XRD), Fourier transform infrared (FTIR), X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), transmission electron microscopy (TEM), vibrating sample magnetometer (VSM), and colloidal stability was checked out by Zeta potential. The biological effects of Fe{sub 3}O{sub 4}/ZnO nanocomposite were investigated by microculture tetrazolium test (MTT) against MCF-7 breast cancer cells as usage in medicine. Crystallite size, lattice strain, and dislocation density of the nanoparticles were estimated with Williamson-Hall method. The obtained results show that the highest death rate of Michigan Cancer Foundation-7 (MCF-7) cancer cells was for Fe{sub 3}O{sub 4}/ZnO nanocomposite with the molar ratio is 1:10 in the lower concentration (49 μ g/ml). Therefore, these nanocomposites due to their small size, colloidal stability, magnetic properties, and nontoxicity can be a good candidate as option in medicine application.

60 APPLIED LIFE SCIENCES↗

Correlation Between Structural Parameters and Mechanical Properties of Al5083 Sheets Processed by ECAR

In the paper, structural parameters and mechanical properties of Al5083 alloy sheet during equal channel angular rolling (ECAR) process and their relationship are studied. In order to evaluate the effect of ECAR process, Al5083 strips were subjected to the ECAR process for 1, 2, and 3 passes through the die channel angles 110°, 120°, and 130° at two routes. The effect of the process on the microstructural evolution of samples was investigated by means of x-ray diffraction and EBSD techniques. X-ray pattern has been analyzed using Rietveld method to compute structural parameters, including microstrain, average crystallite size, and dislocation density. The results showed that the dislocation density and microstrain were increased, and crystallite size was decreased during ECAR process. It was found that the behavior of variations in mechanical properties was in accordance with the dislocation density changes. This paper revealed that the increase in the strength of ECARed samples could be attributed to reduction in high-angle grain boundaries and the increase in dislocation density. Moreover, the yield strength estimated from Taylor equation was found in accordance very well with the experimentally measured yield strength of the samples.

36 MATERIALS SCIENCE↗

Plastic deformation in nanoindentation of tantalum: A new mechanism for prismatic loop formation

Here, the mechanisms of deformation under a nanoindentation in tantalum, chosen as a model body-centered cubic (bcc) metal, are identified and quantified. Molecular dynamics (MD) simulations and indentation experiments are conducted for [1 0 0], [1 1 0] and [1 1 1] normals to surface orientations. The simulated plastic deformation proceeds by the formation of nanotwins, which rapidly evolve into shear dislocation loops. It is shown through a dislocation analysis that an elementary twin (three layers) is energetically favorable for a diameter below ~7 nm, at which point a shear loop comprising a perfect dislocation is formed. MD simulations show that shear loops expand into the material by the advancement of their edge components. Simultaneously with this advancement, screw components of the loop cross-slip and generate a cylindrical surface. When opposite segments approach, they eventually cancel by virtue of the attraction between them, forming a quasi-circular prismatic loop composed of edge dislocation segments. This “lasso”-like mechanism by which a shear loop transitions to a prismatic loop is identified for both [0 0 1] and [1 1 1] indentations. The prismatic loops advance into the material along $\langle$1 1 1$\rangle$ directions, transporting material away from the nucleation site. Analytical calculations supplement MD and experimental observations, and provide a framework for the improved understanding of the evolution of plastic deformation under a nanoindenter. Dislocation densities under the indenter are estimated experimentally (~1.2 × 10 15 m -2 ), by MD (~7 × 10 15 m -2 ) and through an analytical calculation (2.6–19 × 10 15 m -2 ). Considering the assumptions and simplifications, this agreement is considered satisfactory. MD simulations also show expected changes in pile-up symmetry after unloading, compatible with crystal plasticity.

36 MATERIALS SCIENCE↗

Predicting the proximity to macroscopic failure using local strain populations from dynamic in situ X-ray tomography triaxial compression experiments on rocks

Predicting the proximity of large-scale dynamic failure is a critical concern in the engineering and geophysical sciences. Here we use evolving contractive, dilatational, and shear strain deformation preceding failure in dynamic X-ray tomography experiments to examine which strain components best predict the proximity to failure. We develop machine learning models to predict the proximity to failure using time series of three-dimensional local incremental strain tensor fields acquired in rock deformation experiments under stress conditions of the upper crust. Three-dimensional scans acquired in situ throughout triaxial compression experiments provide a distribution of density contrasts from which we estimate the three-dimensional incremental strain that accumulates between each scan acquisition. Training machine learning models on multiple experiments of six rock types provides suites of feature importance that indicate the predictive power of each feature. Comparing the average importance of groups of features that include information about each strain component quantifies the ability of the contractive, dilatational and shear strain to predict the proximity of macroscopic failure. A total of 24 models of four machine learning algorithms with six rock types indicate that 1) the dilatational strain provides the best predictive power of the strain components, and 2) the intermediate values (25th-75th percentile) of the strain population provide the best predictive power of the statistics of the strain populations. In addition, the success of the predictions of models trained on one rock type and tested on other rock types quantifies the similarities and differences of the precursory strain accumulation process in the six rock types. These similarities suggest the potential existence of a unified theory of brittle rock deformation for a range of rock types.

58 GEOSCIENCES↗

Demonstration of space-resolved x-ray Thomson scattering capability for warm dense matter experiments on the Z accelerator

Experiments on the Sandia Z pulsed-power accelerator demonstrated the ability to produce warm dense matter (WDM) states with unprecedented uniformity, duration, and size, which are ideal for investigations of fundamental WDM properties. For the first time, space-resolved x-ray Thomson scattering (XRTS) spectra from shocked carbon foams were recorded on Z. The large (> 20 MA) electrical current produced by Z was used to launch Al flyer plates up to 25 km/s. The impact of the flyer plate on a CH 2 foam target produced a shocked state with an estimated pressure of 0.75 Mbar, density of 0.52 g/cm 3 , and temperature of 4.3 eV. Both unshocked and shocked portions of the foam target were probed with 6.2 keV x-rays produced by focusing the Z-Beamlet laser onto a nearby Mn foil. The data is composed of three spatially distinct spectra that were simultaneously captured with a single spectrometer with high spectral (4.8 eV) and spatial (190 μm) resolutions. Furthermore, these spectra provide detailed information on three target locations: the laser spot, the unshocked foam, and the shocked foam.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Hydrodynamic and magnetohydrodynamic simulations of wire turbulence

In this paper, we report on simulations of laboratory experiments in which magnetized supersonic flows are driven through a wire mesh. The goal of the study was to investigate the ability of such a configuration to generate supersonic, MHD turbulence. We first report on the morphological structures that develop in both magnetized and non-magnetized cases. We then analyze the flow using a variety of statistical measures, including power spectra and probability distribution functions of the density. Using these results we estimate the sonic mach number in the flows downstream of the wire mesh. Finally, we find the initially hypersonic (M s = 20) planar shock through the wire mesh does lead to downstream turbulent conditions. However, in both magnetized and non-magnetized cases, the resultant turbulence was marginally supersonic to transonic (M s ~1), and highly anisotropic in structure.

(Magnetohydrodynamics) MHD↗

Inference of reaction rate parameters based on summary statistics from experiments

Here, we present the results of an application of Bayesian inference and maximum entropy methods for the estimation of the joint probability density for the Arrhenius rate para meters of the rate coefficient of the H 2 /O 2 -mechanism chain branching reaction H + O 2 → OH + O. Available published data is in the form of summary statistics in terms of nominal values and error bars of the rate coefficient of this reaction at a number of temperature values obtained from shock-tube experiments. Our approach relies on generating data, in this case OH concentration profiles, consistent with the given summary statistics, using Approximate Bayesian Computation methods and a Markov Chain Monte Carlo procedure. The approach permits the forward propagation of parametric uncertainty through the computational model in a manner that is consistent with the published statistics. A consensus joint posterior on the parameters is obtained by pooling the posterior parameter densities given each consistent data set. To expedite this process, we construct efficient surrogates for the OH concentration using a combination of Pad'e and polynomial approximants. These surrogate models adequately represent forward model observables and their dependence on input parameters and are computationally efficient to allow their use in the Bayesian inference procedure. We also utilize Gauss-Hermite quadrature with Gaussian proposal probability density functions for moment computation resulting in orders of magnitude speedup in data likelihood evaluation. Despite the strong non-linearity in the model, the consistent data sets all res ult in nearly Gaussian conditional parameter probability density functions. The technique also accounts for nuisance parameters in the form of Arrhenius parameters of other rate coefficients with prescribed uncertainty. The resulting pooled parameter probability density function is propagated through stoichiometric hydrogen-air auto-ignition computations to illustrate the need to account for correlation among the Arrhenius rate parameters of one reaction and across rate parameters of different reactions.

97 MATHEMATICS AND COMPUTING↗

Revealing cyclic hardening mechanism of a TRIP steel by real-time in situ neutron diffraction

Real-time in situ neutron diffraction was performed on a transformation-induced plasticity (TRIP) steel under cyclic loading at room temperature. By Rietveld refinement and single peak analysis, the volume fraction and average stress estimates as well as dislocation density of individual phases (austenite and martensite phase) were derived. The results reveal that the volume fraction of martensite phase, instead of individual phase strengthening, should be accounted for the remarkable secondary cyclic hardening.

Austenitic steels↗

Physical Properties of Candidate X-ray Detector Material Rb 4 Ag 2 BiBr 9

Recently, metal halide perovskites have emerged as promising semiconductor candidates for sensitive X-ray photon detection due to their suitable band gap energies, excellent charge transport properties, and low material cost afforded by their low-temperature solution-processing preparation. Furthermore, we report an improved methodology for single crystal growth and thermal and electrical properties of a two-dimensional (2D) layered halide material Rb 4 Ag 2 BiBr 9 , which has been identified as a potential candidate for X-ray radiation detection applications. The measured heat capacity for Rb 4 Ag 2 BiBr 9 implies that there are no structural phase transitions upon cooling. Temperature dependence of thermal transport measurements further suggests remarkably low thermal conductivities of Rb 4 Ag 2 BiBr 9 that are comparable to the lowest reported in literature. The bulk crystal resistivity is determined to be 2.59 × 10 9 Ω·cm from the current–voltage (I–V) curve. Density of trap states is estimated to be ~10 10 cm –3 using the space-charge-limited-current measurements. The fabricated Rb 4 Ag 2 BiBr 9 -based X-ray detector shows good operational stability with no apparent current drift, which may be ascribed to the 2D crystal structure of Rb 4 Ag 2 BiBr 9 . Finally, by varying the X-ray tube current to change the corresponding dose rate, the Rb4Ag2BiBr9 X-ray detector sensitivity is determined to be 222.03 μC Gy –1 cm –2 (at an electric field of E = 24 V/mm).

36 MATERIALS SCIENCE↗

Predictive Design of Hybrid Improper Ferroelectric Double Perovskite Oxides

The computational design of suitable multiferroic double perovskite oxides requires finding materials that exhibit sizable polarization, magnetization, and coupling between them. Oxides with the chemical formula of AA'BB'O 6 with building blocks of ABO 3 single perovskite oxides in centrosymmetric Pnma symmetry are strong candidates that have been reported to satisfy such criteria. The system lowers to noncentrosymmetric, polar P2 1 symmetry if A/A' layered and B/B' rocksalt cation orderings are imposed. A detailed compositional search over a variety of chemical spaces followed by evaluating their polarization may lead to the identification of more of these compounds with ferroelectric ordering. The standard density functional theory practices to estimate polarization within the Berry phase formalism require the systems to be perfectly insulating. The number of compounds that can be evaluated using this method is therefore limited. In this work, we introduce a predictive learning strategy based on importance sampling to build a series of machine learning models using results from first-principles simulations to predict polarization and the corresponding switching barrier. The geometry-driven features related to charge states and cationic radii play key roles in predicting the switching barrier with complementary contributions from the key structural mode-based order parameters. These modes become important to draw reasonable predictions of polarization components from machine learning models. In conclusion, our predictive models identify candidates with high polarizations and low switching barriers from a pool of double perovskite oxides, suitable for future investigation for their potential applications in spintronic devices.

36 MATERIALS SCIENCE↗

Control of asymmetric strain relaxation in InGaAs grown by molecular-beam epitaxy

InGaAs strain relaxation is studied by an in situ multibeam optical stress sensor (MOSS). Strain relaxation during growth of InGaAs on GaAs occurs at different thicknesses and rates along the directions perpendicular to its misfit dislocations, [110] and [110]. We show the asymmetry of relaxation between these directions in real time by aligning the MOSS laser array along [110] and [110]. This asymmetric relaxation data from the MOSS correlates with both x-ray diffraction relaxation analysis and an estimation of the misfit dislocation density from transmission electron microscopy images. Lowering the V/III ratio or raising the growth temperature lowers the thickness of the onset of dislocation formation, changes the relaxation rate, lowers the final relaxation during 2 {mu}m of growth, and shifts the initial direction of relaxation from [110] to [110]. We identify two phases of relaxation that occur at different growth thicknesses. Lowering the V/III ratio changes the relative contribution of each of these phases to the total relaxation of the epilayer.

36 MATERIALS SCIENCE↗

Direct measurement of energetic electron flow in Q-shu University experiment with steady-state spherical tokamak

In magnetized plasmas, the presence of a significant number of energetic electrons has been observed but quantitative characteristics of these electrons are proving difficult to investigate. A Langmuir probe offers a means to provide quantitative measurement of these energetic electrons that takes into account electron emissions (secondary electron emission and electron reflection) from the probe tips and sheath expansion around the probe tips caused by a considerable negative potential. In this paper, these effects are experimentally confirmed and an analytical means to measure energetic electron characteristics are proposed. An analysis of plasmas produced by a high frequency wave is then applied leading to the successful detection of an asymmetric flow of energetic electrons. The estimated electron temperature and current density were approximately 4-5 keV and 2-3 kA/m{sup 2}.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Adjustment of threshold voltage in AlN/AlGaN/GaN high-electron mobility transistors by plasma oxidation and Al{sub 2}O{sub 3} atomic layer deposition overgrowth

We discuss possibilities of adjustment of a threshold voltage V{sub T} in normally off GaN high-electron mobility transistors (HEMTs) without compromising a maximal drain current I{sub DSmax}. Techniques of a low power plasma or thermal oxidation of 2-nm thick AlN cap over 3-nm thick AlGaN barrier are developed and calibrated for a thorough oxidation of the cap with a minimal density of surface donors at the inherent oxide-semiconductor interface. It has been shown that while a thermal oxidation technique leads to the channel and/or interface degradation, low density of surface donors and scalability of V{sub T} with additionally overgrown Al{sub 2}O{sub 3} may be obtained for plasma oxidized HEMTs. With 10-nm thick Al{sub 2}O{sub 3} deposited at 100 °C by atomic-layer deposition, we obtained V{sub T} of 1.6 V and I{sub DSmax} of 0.48 A/mm at a gate voltage of V{sub GS} = 8 V. Density of surface donors was estimated to be about 1.2 × 10{sup 13} cm{sup −2}, leaving most of the negative polarization charge at the semiconductor surface uncompensated. Further reduction of surface donors may be needed for even higher V{sub T}.

36 MATERIALS SCIENCE↗

Quantum chi-squared and goodness of fit testing

A quantum mechanical hypothesis test is presented for the hypothesis that a certain setup produces a given quantum state. Although the classical and the quantum problems are very much related to each other, the quantum problem is much richer due to the additional optimization over the measurement basis. A goodness of fit test for i.i.d quantum states is developed and a max-min characterization for the optimal measurement is introduced. We find the quantum measurement which leads both to the maximal Pitman and Bahadur efficiencies, and determine the associated divergence rates. We discuss the relationship of the quantum goodness of fit test to the problem of estimating multiple parameters from a density matrix. These problems are found to be closely related and we show that the largest error of an optimal strategy, determined by the smallest eigenvalue of the Fisher information matrix, is given by the divergence rate of the goodness of fit test.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Atomic layer deposition of crystalline SrHfO{sub 3} directly on Ge (001) for high-k dielectric applications

The current work explores the crystalline perovskite oxide, strontium hafnate, as a potential high-k gate dielectric for Ge-based transistors. SrHfO{sub 3} (SHO) is grown directly on Ge by atomic layer deposition and becomes crystalline with epitaxial registry after post-deposition vacuum annealing at ∼700 °C for 5 min. The 2 × 1 reconstructed, clean Ge (001) surface is a necessary template to achieve crystalline films upon annealing. The SHO films exhibit excellent crystallinity, as shown by x-ray diffraction and transmission electron microscopy. The SHO films have favorable electronic properties for consideration as a high-k gate dielectric on Ge, with satisfactory band offsets (>2 eV), low leakage current (<10{sup −5} A/cm{sup 2} at an applied field of 1 MV/cm) at an equivalent oxide thickness of 1 nm, and a reasonable dielectric constant (k ∼ 18). The interface trap density (D{sub it}) is estimated to be as low as ∼2 × 10{sup 12 }cm{sup −2 }eV{sup −1} under the current growth and anneal conditions. Some interfacial reaction is observed between SHO and Ge at temperatures above ∼650 °C, which may contribute to increased D{sub it} value. This study confirms the potential for crystalline oxides grown directly on Ge by atomic layer deposition for advanced electronic applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetooptical study of Zeeman effect in Mn modulation-doped InAs/InGaAs/InAlAs quantum well structures

We report on a magneto-photoluminescence (PL) study of Zeeman effect in Mn modulation-doped InAs/InGaAs/InAlAs quantum wells (QW). Two PL lines corresponding to the radiative recombination of photoelectrons with free and bound-on-Mn holes have been observed. In the presence of a magnetic field applied in the Faraday geometry, both lines split into two circularly polarized components. While temperature and magnetic field dependence of the splitting are well described by the Brillouin function, providing an evidence for exchange interaction with spin polarized manganese ions, the value of the splitting exceeds by two orders of magnitude the value of the giant Zeeman splitting estimated for the average Mn density in QW obtained by the secondary ion mass spectroscopy.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗