Search NASA⌕ Search

SEARCH · Search NASA

Results for “diffusion models”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,783 records · Page 99

The Hourly GHI, DHI and DNI: Intercomparison of the CERES-Based Data and the NSRDB Data through Comparison with the Ground-Based BSRN Data

The NASA Clouds and the Earth’s Radiant Energy System (CERES) SYN1deg(Ed4.1) provides hourly global horizontal irradiance (GHI), diffuse horizontal irradiance (DHI) and direct horizontal irradiance (DirHI) at 1-degree latitude by 1-degree longitude resolution, and the time span is from March 2000 to near present. While the GHI agrees well with the ground-based Baseline Surface Radiation Network (BSRN) data, the DHI and DirHI are, respectively, positively and negatively biased against the BSRN data, and so is the direct normal irradiance (DNI) derived simply by dividing the DirHI by the cosine of the hourly solar zenith angle (SZA). We found that the biases tend to be well-defined functions of cos(SZA) and the cloud fraction (CLFR). We thus performed a bias-correction on the hourly DHI and DNI in the latitude-cos(SZA)-CLFR phase space, and therefrom, we derived the hourly global tilted irradiance (GTI) at a number of tilt angles using the isotropic diffuse irradiance model, and the results agree well with the GTI derived from the original BSRN near-instantaneous records. Meanwhile, the National Renewable Energy Laboratory (NREL) has produced the National Solar Radiation Database (NSRDB) with finer spatiotemporal resolution using its Physical Solar Model (PSM) and surface-based measured data, model results and satellite-based data as inputs. Now the NSRDB data covers not only the United States and its neighboring regions, but Europe, Africa, Asia and Oceania. The available temporal resolutions are 5, 10, 15, 30 and 60 minutes and the spatial resolutions are 2, 4 and 10 km, depending on the selected region. In this presentation, we compare both the CERES-based and NSRDB GHI, DHI and DNI with their BSRN counterparts and show how finer spatial resolution may give us an advantage in data accuracy and usability.

Taiping Zhang↗

Prediction and measurement of thermal transport across interfaces between isotropic solids and graphitic materials.

Due to the high intrinsic thermal conductivity of carbon allotropes, there have been many attempts to incorporate such structures into existing thermal abatement technologies. In particular, carbon nanotubes (CNTs) and graphitic materials (i.e., graphite and graphene flakes or stacks) have garnered much interest due to the combination of both their thermal and mechanical properties. However, the introduction of these carbon-based nanostructures into thermal abatement technologies greatly increases the number of interfaces per unit length within the resulting composite systems. Consequently, thermal transport in these systems is governed as much by the interfaces between the constituent materials as it is by the materials themselves. This paper reports the behavior of phononic thermal transport across interfaces between isotropic thin films and graphite substrates. Elastic and inelastic diffusive transport models are formulated to aid in the prediction of conductance at a metal-graphite interface. The temperature dependence of the thermal conductance at Au-graphite interfaces is measured via transient thermoreflectance from 78 to 400 K. It is found that different substrate surface preparations prior to thin film deposition have a significant effect on the conductance of the interface between film and substrate.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Time parallelization of plasma simulations using the parareal algorithm

Simulation of fusion plasmas involve a broad range of timescales. In magnetically confined plasmas, such as in ITER, the timescale associated with the microturbulence responsible for transport and confinement timescales vary by an order of 10^6 10^9. Simulating this entire range of timescales is currently impossible, even on the most powerful supercomputers available. Space parallelization has so far been the most common approach to solve partial differential equations. Space parallelization alone has led to computational saturation for fluid codes, which means that the walltime for computaion does not linearly decrease with the increasing number of processors used. The application of the parareal algorithm to simulations of fusion plasmas ushers in a new avenue of parallelization, namely temporal parallelization. The algorithm has been successfully applied to plasma turbulence simulations, prior to which it has been applied to other relatively simpler problems. This work explores the extension of the applicability of the parareal algorithm to ITER relevant problems, starting with a diffusion-convection model.

Samaddar, D.↗

Prediction and measurement of thermal transport across interfaces between isotropic solids and graphitic materials.

Due to the high intrinsic thermal conductivity of carbon allotropes, there have been many attempts to incorporate such structures into existing thermal abatement technologies. In particular, carbon nanotubes (CNTs) and graphitic materials (i.e., graphite and graphene flakes or stacks) have garnered much interest due to the combination of both their thermal and mechanical properties. However, the introduction of these carbon-based nanostructures into thermal abatement technologies greatly increases the number of interfaces per unit length within the resulting composite systems. Consequently, thermal transport in these systems is governed as much by the interfaces between the constituent materials as it is by the materials themselves. This paper reports the behavior of phononic thermal transport across interfaces between isotropic thin films and graphite substrates. Elastic and inelastic diffusive transport models are formulated to aid in the prediction of conductance at a metal-graphite interface. The temperature dependence of the thermal conductance at Au-graphite interfaces is measured via transient thermoreflectance from 78 to 400 K. It is found that different substrate surface preparations prior to thin film deposition have a significant effect on the conductance of the interface between film and substrate.

Norris, Pamela M.↗

Methane Hydrate Formation from Enhanced Organic Carbon Burial During Glacial Lowstands: Examples from the Gulf of Mexico

Methane hydrates in fine-grained marine sediments are often found within veins and fractures occupying discrete depth intervals that are surrounded by hydrate-free sediments. As they are not connected with gas sources beneath the base of the methane hydrate stability zone (MHSZ), these isolated hydrate-bearing intervals have been interpreted as formed by in situ microbial methane. We investigate here the hypothesis that these hydrate deposits form in sediments that were deposited during glacial lowstands and contain higher amounts of labile particulate organic carbon (POC), leading to enhanced microbial methanogenesis. During Pleistocene lowstands, river loads are deposited near the steep top of the continental slope and turbidity currents transport organic-rich, fine-grained sediments to deep waters. Faster sedimentation rates during glacial periods result in better preservation of POC because of decreased exposure times to oxic conditions. The net result is that more labile POC enters the methanogenic zone and more methane is generated in these sediments. To test this hypothesis, we apply an advection-diffusion-reaction model with a time-dependent deposition of labile POC at the seafloor controlled by glacioeustatic sea level variations in the last 250 kyr. The model is run for parameters estimated at three sites drilled by the 2009 Gulf of Mexico Joint Industry Project: Walker Ridge in the Terrebonne Basin (WR313-G and WR313-H) and Green Canyon near the canyon embayment into the Sigsbee Escarpment (GC955-H). In the model, gas hydrate forms in sediments with higher labile POC content deposited during the glacial cycle between 230 and 130 kyr (marine isotope stages 6 and 7). The corresponding depth intervals in the three sites contain hydrates, as shown by high bulk electrical resistivities and resistive subvertical fracture fills. This match supports the hypothesis that enhanced POC burial during glacial lowstands can result in hydrate formation from in situ microbial methanogenesis. Our results have implications for carbon cycling during glacial/interglacial cycles and for hydrate accumulation in the MHSZ. In particular, once hydrate-bearing intervals formed during glacial periods are buried beneath the MHSZ and dissociate, gas bubbles can rise and recycle microbial methane into the MHSZ.

Malinverno, Alberto↗

Assessment of Error Sources in the Modeling of POA Irradiance Under Clear-Sky Conditions: Preprint

A new physics-based model, the Fast All-sky Radiation Model for Solar applications with Narrowband Irradiances on Tilted surfaces (FARMS-NIT), accurately computes plane-of-array (POA) irradiances in both narrow- and broad wavelength bands within the solar region. The evaluation studies suggest that the new model provides increased accuracy than a model assuming isotropic diffuse solar radiation and an empirical model linking the POA irradiances with long-term surface observations at selected locations. This study anlyzes the surface observations used by FARMS-NIT and is intended to understand the error sources under clear-sky conditions as well as their impact to the performance of FARMS-NIT.

14 SOLAR ENERGY↗

Radioactive Waste Water Treatment for Fukushima Daiichi Nuclear Power Plant - 16081

The Great East Japan Earthquake of 11 March 2011 caused serious damage to the Fukushima Daiichi Nuclear Power Station (NPS) of the Tokyo Electric Power Company, Inc.. Toshiba and Shaw/AVANTech installed a Simplified Active Water Retrieve and Recovery System (SARRY{sup TM}) to remove radioactive cesium (Cs) from the contaminated water. Toshiba, in partnership with EnergySolutions, also developed and installed the Multi Radionuclide Removal System (MRRSTM), which can remove radioactive nuclides being treated, except tritium, to a level less than the concentration limit in water. As contaminated water treatment has progressed, the composition of the contaminated water has changed. Both salinity and radioactive Cs concentration in the contaminated water have been decreasing. Thus, a new adsorbent that is suitable for the present water chemistry conditions is required. In order to provide an appropriate contaminated-water treatment system, Toshiba has been examining the removal of not only radioactive Cs but also radioactive strontium (Sr) by SARRY{sup TM}. SARRY{sup TM} has been operated for removing Cs by using a Cs adsorbent. Instead of a Cs adsorbent, a new media that has high selectivity for both Cs and Sr should be installed. This paper describes the results obtained when using the newly developed adsorbent for removing Cs and Sr at once. As the Cs and Sr adsorbent, we have selected crystalline silico-titanate (CST). The distribution coefficient (K{sub d}) of CST was determined by the batch method. The lifetime of the adsorbent was evaluated by a column examination. The selected CST had a K{sub d} value of over 10{sup 4} ml/g for both Cs and Sr. The highest-selectivity CST had a lifetime (defined as the period for the outlet concentration to decrease to one tenth of the inlet level) of more than 125000 BV (bed volume) for Cs and more than 18000 BV for Sr, when the test was conducted at 10 BV/h. Calculation code was also developed for estimating the relation between the BV and the decontamination factor (DF) using an adsorption rate model for diffusion and adsorption. The calculation results of the Cs and Sr adsorption behavior agreed well with the experimental results. To evaluate the replacement cycle of adsorption tower in actual equipment, the radiation exposure during the replacement operation and the required Cs and Sr removal performance were used as limiting conditions for the estimation. The results of the evaluation showed that the selected CST has sufficient performance for practical usage. Based on this finding, Toshiba proposed loading the CST in SARRY{sup TM}, and SARRY{sup TM} loaded with this CST started removing Cs and Sr in December 2014 resulting in decreased contaminated water. It has been continuously working since then. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Novel Photonuclear Methods to Produce an Argon-37 Standard

The mission of this research is to explore novel photonuclear-based pathways into the production of 37Ar. Above-background detection levels of 37Ar uniquely indicates the occurrence of an underground nuclear explosion, produced from fission neutrons interacting in the surrounding environment through the 40Ca(n,a)37Ar reaction. The half-life of 35 days allows on-site inspectors (OSI) adequate time following the nuclear event to detect 37Ar and verify compliance or defiance of non-proliferation treaties such as the Comprehensive Nuclear-Test-Ban Treaty (CTBT). An 37Ar standard would give OSI the ability to calibrate their detectors and measure detector efficiency allowing for the quantification of detected activity, give OSI authentic samples to test detectors in field exercises, and improve models predicting diffusion pathways of 37Ar through the underground environment.

43 PARTICLE ACCELERATORS↗

Hydroxyl radical yields in the heavy ion radiolysis of water

Scavenging experiments coupled with Monte Carlo track structure and kinetics simulations have been used to determining and understand the yields of hydroxyl radicals in the radiolysis of water with protons and carbon ions. Carbon dioxide production from aerated formic acid solutions with concentrations ranging from 10-3 to 1 mol./dm3 was used as a probe of the time dependence of the hydroxyl radical yield from about 5 ns to 1 ?s. Numerical extrapolation of the results at slightly different ion energies in combination with data from gamma radiolysis experiments allows a systematic analysis of both track average and track segment yields, with considerable track chemistry found to occur on the nanosecond to microsecond time scale. Track chemistry calculations utilizing Monte Carlo track structure simulations and nonhomogeneous independent reaction times diffusion-reaction modeling of product yields reproduce experimental observations. Subsequently, the track simulation methods were used to predict hydroxyl radical kinetics in deaerated and aerated water at neutral pH. Taken with literature data for helium ion beam studies, the results offer insight into the potential for indirect radiation induced damage to biological systems for light ions with very different track structures.

38 - RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCL↗

Isopycnal Eddy Diffusivities and Critical Layers in the Kuroshio Extension from an Eddying Ocean Model

High spatial resolution isopycnal diffusivities are estimated in the Kuroshio Extension (KE) region (28°–40°N, 120°–190°E) from a global 1/10° Parallel Ocean Program (POP) simulation. The numerical float tracks are binned using a clustering approach. The number of tracks in each bin is thus roughly the same leading to diffusivity estimates that converge better than those in bins defined by a regular geographic grid. Cross-stream diffusivities are elevated in the southern recirculation gyre region, near topographic obstacles and downstream in the KE jet, where the flow has weakened. Along-stream diffusivities, which are much larger than cross-stream diffusivities, correlate well with the magnitudes of eddy velocity. The KE jet suppresses cross-stream mixing only in some longitude ranges. This study estimates the critical layer depth both from linear local baroclinic instability analysis and from eddy phase speeds in the POP model using the Radon transform. The latter is a better predictor of large mixing length in the cross-stream direction. Critical layer theory is most applicable in the intense jet regions away from topography.

54 ENVIRONMENTAL SCIENCES↗

Simulating hindered grain boundary diffusion using the smoothed boundary method

Abstract Grain boundaries can greatly affect the transport properties of polycrystalline materials, particularly when the grain size approaches the nanoscale. While grain boundaries often enhance diffusion by providing a fast pathway for chemical transport, some material systems, such as those of solid oxide fuel cells and battery cathode particles, exhibit the opposite behavior, where grain boundaries act to hinder diffusion. To facilitate the study of systems with hindered grain boundary diffusion, we propose a model that utilizes the smoothed boundary method to simulate the dynamic concentration evolution in polycrystalline systems. The model employs domain parameters with diffuse interfaces to describe the grains, thereby enabling solutions with explicit consideration of their complex geometries. The intrinsic error arising from the diffuse interface approach employed in our proposed model is explored by comparing the results against a sharp interface model for a variety of parameter sets. Finally, two case studies are considered to demonstrate potential applications of the model. First, a nanocrystalline yttria-stabilized zirconia solid oxide fuel cell system is investigated, and the effective diffusivities are extracted from the simulation results and are compared to the values obtained through mean-field approximations. Second, the concentration evolution during lithiation of a polycrystalline battery cathode particle is simulated to demonstrate the method’s capability.

Materials Science↗

Uptake and diffusion of plasma-generated reactive nitrogen species through keratinized membrane

We propose a mathematical model for uptake and diffusion of air plasma-generated reactive nitrogen species (RNS) in a model keratinized membrane, such as a thin slice of bovine hoof or human nail material. An experimental system consisting of a surface microdischarge (SMD) in air was designed for the purpose of developing and validating a reaction-diffusion model to describe this system. Key variables such as membrane effective diffusivity, surface reaction rate coefficients, and other parameters are determined through comparison between the model predictions and experimental measurements. The model results yield spatial and temporal concentration profiles of RNS inside the keratinized membrane, leading to an improved understanding of transport and reaction of plasma generated RNS through the membrane. This work offers insights into possible mechanisms underlying plasma treatment of toenail fungus.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Simulations and Experiments Reveal Effect of Nanopores on Helium Diffusion in Quartz

The diffusion properties of noble gases in minerals are widely used to reconstruct the thermal histories of rocks. In this work, we combine density functional theory (DFT) calculations with laboratory experiments to investigate controls on helium diffusion in quartz. DFT calculations for perfect α-quartz predict substantially lower activation energies and frequency factors for helium diffusion than observed in laboratory experiments, especially in the [001] direction. These results imply that no helium could be retained in quartz at Earth surface temperatures, which conflicts with observations of partial cosmogenic 3 He retention over geologic time scales. Here, we implement a model of helium diffusion in α-quartz modulated by nanopore defects that disrupt energetically favorable diffusion pathways. In this model, we find that laboratory-determined diffusivities can be most closely reproduced when a helium atom encounters ~70 nanopore sites per million interstitial sites. The results of our model indicate that diffusion of helium in natural quartz, like other noble gases in other minerals, can be significantly modulated by extended defects.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Vertical O(sub 3) distribution as a diagnostic for eddy diffusion profile

A model study of the distribution of ozone on Mars is presented. It is showed that knowledge of the vertical ozone distribution, such as could be obtained from ultraviolet measurements from an orbiter, could be used to infer vertical transport rates at various levels in the atmosphere. The dependence of the vertical distribution of O(sub 3) on the height variation of eddy diffusion coefficient is illustrated. Ozone abundance is a valuable diagnostic for other climatological parameters. In addition, the sensitivity of O(sub 3) distribution to eddy diffusion may aid in determining the role of surface oxidation and recombination processes and lead to a better understanding of the volatiles released or adsorbed cyclically in the Martian regolith.

Tyler, A. L.↗

Modeling Radar Scatter from Icy and Young Rough Lunar Craters

For lunar orbital synthetic aperture radars, such as the Chandrayaan Mini-RF operating at S- band (13-cm) wavelength and the Lunar Reconnaissance Orbiter Mini-RF operating at S- band and X-band (3-cm) wavelengths, it is important to understand the radar backscattering characteristics of the icy and young, rough craters. Assuming a mixing model consisting of diffuse and quasi-specular scattering components, we have modeled the opposite-sense circular (OC) and same-sense circular (SC) backscattering characteristics. The specular component, consisting of only OC echoes, represents the echoes from the surface and subsurface layers that are oriented perpendicular to the radar's line-of-sight. The diffuse component, consisting of both SC and OC echoes, represents the echoes associated with either rocks or ice. Also, diffuse echoes have backscatter that is proportional to the cosine of the incidence angle. We modeled how these two (specular and diffuse) radar scattering components could be modulated by factors such as surface roughness associated with young craters. We also modeled how ice radar scattering components could be modulated by a thin regolith covering, and/or by the situation where ice occupies small patches within a larger radar pixel. We tested this modeling by examining 4 nonpolar craters and 12 polar craters using LRO Mini-RF data. Results indicate that icy and young rough craters can be distinguished based upon their SC enhancements (Alpha) and OC enhancements (Gamma). In addition, we also examined the craters that have unusual circular polarization ratios (CPRs) that likely result from a double bounce mode of scattering. Blocky fresh craters, icy craters, and craters exhibiting double bounce scattering can be separated based on the values of Alpha, Gamma, the ratio of Alpha/Gamma and the weighted sum of Alpha and Gamma.

lunar craters↗