Search NASA⌕ Search

SEARCH · Search NASA

Results for “mixed methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,783 records · Page 99

Optical and electrical studies of cerium mixed oxides

The fast development in nanotechnology makes enthusiastic interest in developing nanomaterials having tailor made properties. Cerium mixed oxide materials have received great attention due to their UV absorption property, high reactivity, stability at high temperature, good electrical property etc and these materials find wide applications in solid oxide fuel cells, solar control films, cosmetics, display units, gas sensors etc. In this study cerium mixed oxide compounds were prepared by co-precipitation method. All the samples were doped with Zn (II) and Fe (II). Preliminary characterizations such as XRD, SEM / EDS, TEM were done. UV - Vis, Diffuse reflectance, PL, FT-IR, Raman and ac conductivity studies of the samples were performed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

ASTROPHYSICAL FLUID DYNAMICS VIA DIRECT STATISTICAL SIMULATION

In this paper, we introduce the concept of direct statistical simulation for astrophysical flows. This technique may be appropriate for problems in astrophysical fluids where the instantaneous dynamics of the flows are of secondary importance to their statistical properties. We give examples of such problems including mixing and transport in planets, stars, and disks. The method is described for a general set of evolution equations, before we consider the specific case of a spectral method optimized for problems on a spherical surface. The method is illustrated for the simplest non-trivial example of hydrodynamics and magnetohydrodynamics on a rotating spherical surface. We then discuss possible extensions of the method both in terms of computational methods and the range of astrophysical problems that are of interest.

79 ASTRONOMY AND ASTROPHYSICS↗

Synthesis of Monodisperse FeCo Nanoparticles by Reductive Salt-Matrix Annealing

We report here a novel synthetic method to prepare monodisperse air-stable FeCo nanoparticles. CoFe2O4 nanoparticles with different sizes were first synthesized by a chemical solution method. The as-synthesized CoFe2O4 nanoparticles were then mixed with ball-milled NaCl powders and heated to 400–500oC in forming gas (Ar 93% + H2 7%). The salt powder worked as a separating medium that prevents the CoFe2O4 nanoparticles from agglomerating during the heat treatment while the forming gas reduces the CoFe2O4 nanoparticles to FeCo nanoparticles. Monodisperse FeCo nanoparticles were recovered by dissolving the NaCl in water and subsequently washing with ethanol and acetone. Structural analyses confirmed that FeCo nanoparticles retained the same size as their oxide precursors. The size of the FeCo nanoparticles can be well tuned by controlling the size of the CoFe2O4 nanoparticles. The saturation magnetization of FeCo nanoparticles is size dependent and increases with size.

agglomerating↗

Long-exposure NuSTAR constraints on decaying dark matter in the Galactic halo

Here, we present two complementary NuSTAR x-ray searches for keV-scale dark matter decaying to monoenergetic photons in the Milky Way halo. In the first, we utilize the known intensity pattern of unfocused stray light across the detector planes—the dominant source of photons from diffuse sources—to separate astrophysical emission from internal instrument backgrounds using ~7- Ms/detector deep blank-sky exposures. In the second, we present an updated parametric model of the full NuSTAR instrument background, allowing us to leverage the statistical power of an independent ~20-Ms/detector stacked exposures spread across the sky. Finding no evidence of anomalous x-ray lines using either method, we set limits on the active-sterile mixing angle sin 2 ⁡(2⁢θ) for sterile-neutrino masses 6–40 keV. The first key result is that we strongly disfavor a ~7-keV sterile neutrino decaying into a 3.5-keV photon. The second is that we derive leading limits on sterile neutrinos with masses ~15–18 keV and ~25–40 keV, reaching or extending below the big bang nucleosynthesis limit. In combination with previous results, the parameter space for the neutrino minimal standard model is now nearly closed.

79 ASTRONOMY AND ASTROPHYSICS↗

Sigma and pion decays of mixed heavy hybrids

We estimate the relative branching ratio of {sigma} to 2{pi} for the decay of the {Psi}{sup '}(2S), which we have found to be a mixed charm and hybrid charmonium meson. The external field method and correlators from a previous calculation are used to estimate these decays. We find the {sigma} to 2{pi} branching ratio for {Psi}{sup '}(2S) to the J/{Psi}(1S) decay to be 0.98, in agreement with an experiment at IHEP-BES.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Load Shedding for Voltage Regulation With Probabilistic Agent Compliance

With the increased observability and controllability of distribution systems, the share of behind-the-meter systems is trending upwards rapidly. As a consequence, the impact of human behaviors on system performance can no longer be ignored and should be reflected in the energy management system models. In this paper, we discuss the problem of distribution system voltage control by active power curtailment where the agent compliance of the load curtailment signal is probabilistic. We discuss the modeling of the optimal voltage control problem with probabilistic agent compliance as a chance-constrained optimization problem, its tractable safe approximation using convex restriction, and a scenario-based mixed-integer reformulation as well as the associated solution method based on augmented Lagrangian method. The numerical simulation on IEEE test system validates the effectiveness of the proposed approach in obtaining high-quality feasible load curtailment signal with low computational cost, which makes it a viable tool for real time decision making.

augmented Lagrangian method↗

Adaptive Load Shedding as Part of Primary Frequency Response To Support Networked Microgrid Operations

Global changes in the deployment of distributed energy resources, control and communications technologies, business models, and regulatory policy are increasing the operational options for future distribution systems. One such option is the coordinated operation of distributed resources to form microgrids and networks of microgrids to support traditional bulk power systems during normal operations and critical end-use loads during outages. While individual standalone microgrids have been extensively studied and deployed, the coordinated operation of networked microgrids is operationally more challenging due to the dynamic boundaries and changing mix of generation resources. Here, this paper presents a method of using a distributed control architecture to support primary frequency response in networked microgrids operations. The support of primary frequency response is accomplished using the Open Field Message Bus reference architecture and Grid Friendly Appliance controllers.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

A Scale-Adaptive Turbulent Kinetic Energy Closure for the Dry Convective Boundary Layer

Abstract A pragmatic scale-adaptive turbulent kinetic energy (TKE) closure is proposed to simulate the dry convective boundary layer for a variety of horizontal grid resolutions: from 50 m, typical of large-eddy simulation models that use three-dimensional turbulence parameterizations/closures, up to 100 km, typical of climate models that use one-dimensional turbulence and convection parameterizations/closures. Since parameterizations/closures using the TKE approach have been frequently used in these two asymptotic limits, a simple method is proposed to merge them with a mixing-length-scale formulation for intermediate resolutions. This new scale-adaptive mixing length naturally increases with increasing grid length until it saturates as the grid length reaches mesoscale-model resolution. The results obtained using this new approach for dry convective boundary layers are promising. The mean vertical profiles of potential temperature and heat flux remain in good agreement for different resolutions. A continuous transition (in terms of resolution) across the gray zone is illustrated through the partitioning between the model-resolved and the subgrid-scale transports as well as by documenting the transition of the subgrid-scale TKE source/sink terms. In summary, a natural and continuous transition across resolutions (from 50 m to 100 km) is obtained, for dry convection, using exactly the same atmospheric model for all resolutions with a simple scale-adaptive mixing-length formulation.

Kurowski, Marcin J.↗

Discovering The Folding Rules That Proteins Obey FY08 LDRD Final Report

This project’s objective was to study protein folding using a combination of experimental, theoretical and simulation methods. Our study was enabled by a robust microfluidic mixing devices and by long time simulations on supercomputers. The project partially funded research for 7 published articles and we anticipate one more publication for which some of the data was taken using LDRD funds. The publications describe development of new instrumentation for studies of protein folding (2, 3, 4, 5, 6) and new measurements of protein folding kinetics (1, 4, 5, 8) that contribute to furthering of our understanding of the complex folding phenomena. The LDRD project also supported Dr. Bakajin’s work on a review article (7).

59 BASIC BIOLOGICAL SCIENCES↗

Hybrid Gama Emission Tomography (HGET): FY16 Annual Report

Current International Atomic Energy Agency (IAEA) methodologies for the verification of fresh low-enriched uranium (LEU) and mixed oxide (MOX) fuel assemblies are volume-averaging methods that lack sensitivity to individual pins. Further, as fresh fuel assemblies become more and more complex (e.g., heavy gadolinium loading, high degrees of axial and radial variation in fissile concentration), the accuracy of current IAEA instruments degrades and measurement time increases. Particularly in light of the fact that no special tooling is required to remove individual pins from modern fuel assemblies, the IAEA needs new capabilities for the verification of unirradiated (i.e., fresh LEU and MOX) assemblies to ensure that fissile material has not been diverted. Passive gamma emission tomography has demonstrated potential to provide pin-level verification of spent fuel, but gamma-ray emission rates from unirradiated fuel emissions are significantly lower, precluding purely passive tomography methods. The work presented here introduces the concept of Hybrid Gamma Emission Tomography (HGET) for verification of unirradiated fuels, in which a neutron source is used to actively interrogate the fuel assembly and the resulting gamma-ray emissions are imaged using tomographic methods to provide pin-level verification of fissile material concentration.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Characterizing the Turbulent Structure of the Convective Boundary Layer Using ARM/ASR Observations and LES Model Output

This project used high-resolution observations and output from large-eddy simulation models to characterize turbulent motions within the planetary boundary layer. As part of this research, we (a) continued development of techniques to derive profiles of temperature and humidity from ground-based instruments, (b) characterized the higher order moments of water vapor at a tropical location, (c) evaluated the time-of-day dependent turbulent mixing within the boundary layer, (d) developed an improved method to derive turbulent quantities at the top of the boundary layer from profiles of temperature, humidity, and wind, (e) organized and conducted a large field campaign to study the interactions between the land surface and atmosphere, and (f) developed improved ways to determine the depth of the boundary layer.

54 ENVIRONMENTAL SCIENCES↗

Investigation of Rare Earth Element Extraction from North Dakota Coal-Related Feedstocks (Phase 2 Final Technical Report)

There were four major goals of this project: i) identify promising lignite or lignite-related feedstocks with total rare earth element content above 300 parts per million (ppm), ii) evaluate at the lab and bench-scale the extractability of the REE from the material, iii) determine the processing required to generate REE concentrates in excess of 2 wt%, iv) evaluate the economic feasibility of the process and develop a pathway for commercialization. In the Phase 1 study, work was primarily focused upon resource evaluation and labscale extractability of the REE, with a preliminary techno-economic assessment (TEA) conducted, whereas in the Phase 2 work, the extraction process was conducted at the bench scale, a method for cost-effective generation of higher purity mixed REE concentrates (up to 65%) was developed, and a refined TEA on the bench-scale data for a 1,000 kg coal processing test was conducted.

01 COAL, LIGNITE, AND PEAT↗

Understanding Mechanisms of Selective Crystal Nucleation and Growth Using In Situ Electron Microscopy

Separation processes are essential for purifying and isolating critical materials, but are challenging due to the natural tendency of systems to mix. This project explores far-from-equilibrium separation methods using external electric and magnetic fields to drive selective nucleation and crystal growth. Using in situ electrochemical transmission electron microscopy (TEM), we observed ion transport and crystallization behavior under applied electric fields. We found that ions migrate toward the working electrode, where nucleation preferentially occurs. These findings advance our understanding of non-equilibrium separation mechanisms and support the development of efficient, sustainable methods for extracting critical materials from unconventional domestic sources.

36 MATERIALS SCIENCE↗

Bayesian Fit to NOvA Data Subsamples for Three Flavor Oscillation Analysis

NOvA (NuMI Off-Axis $\nu_e$ Appearance) is a long baseline neutrino experiment designed to measure the oscillation of muon neutrinos to electron neutrinos over a distance of 810 km. NOvA uses a near and far detector to observe $\nu_\mu$ disappearance and $\nu_e$ appearance of neutrinos produced by the NuMI beam at Fermilab. NOvA uses a Bayesian analysis framework in addition to its Frequentist method to measure neutrino oscillation parameters such as the mixing angles, mass ordering, and CP-violating phase. We report preliminary results of Bayesian fits to representative NOvA datasets. Comparison of fits to $\nu_\mu$ disappearance and $\nu_e$ appearance enables a cross-check of NOvA results with reactor $\bar{\nu_e}$ disappearance measurements. NOvA also searches for violation of Lorentz invariance by analyzing fits of forward horn current (FHC) versus reverse horn current (RHC) samples. The results validate and advance NOvA's contributions to precision measurements of neutrino properties.

Zhao, Larry [Fermilab]↗

Enrichment of By-Product Materials from Steel Pickling Acid Regeneration Plants (TRP 9942)

A new process for manufacturing an enriched, iron-based product (strontium hexaferrite) in existing steel pickling acid regeneration facilities was evaluated. Process enhancements and equipment additions were made to an existing acid regeneration plant to develop and demonstrate (via pilot scale testing and partial-capacity production trials) the viability of a patented method to produce strontium-based compounds that, when mixed with steel pickling acid and roasted, would result in a strontium hexaferrite powder precursor which could then be subjected to further heat treatment in an atmosphere that promotes rapid, relatively low-temperature formation of discrete strontium hexaferrite magnetic domains yielding an enriched iron-based product, strontium hexaferrite, that can be used in manufacturing hard ferrite magnets.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Strategic Offering for Wind Power Producers Considering Energy and Flexible Ramping Products

The increasing deployments of renewable generation methods, such as wind, affects the flexibility of electric power system operating due to their inherent variability and uncertainty. To mitigate this, power systems need flexible resources. This paper investigates the potential for wind power to provide flexible ramping products in the real-time market, an additional value stream to the energy it provides. The proposed model for wind power’s strategic offering is formulated as a bi-level optimization problem with wind profit maximization at the upper level and the independent system operator’s economic dispatch—considering both the energy balance and the flexible ramping requirement to counter uncertainty—at the lower level. This bi-level model is converted to a mathematical program with equilibrium constraints (MPEC) by recasting the lower level problem with its Karush–Kuhn–Tucker optimality conditions. Then, through strong duality theory and the big-M method, the MPEC model is converted to a mixed-integer linear programming model. The opportunity cost and the price for wind power-providing ramping products are analyzed. Numerical examples based on a 5-bus network are presented to verify the proposed model and concept.

17 WIND ENERGY↗

Space shuttle booster multi-engine base flow analysis

A comprehensive review of currently available techniques pertinent to several prominent aspects of the base thermal problem of the space shuttle booster is given along with a brief review of experimental results. A tractable engineering analysis, capable of predicting the power-on base pressure, base heating, and other base thermal environmental conditions, such as base gas temperature, is presented and used for an analysis of various space shuttle booster configurations. The analysis consists of a rational combination of theoretical treatments of the prominent flow interaction phenomena in the base region. These theories consider jet mixing, plume flow, axisymmetric flow effects, base injection, recirculating flow dynamics, and various modes of heat transfer. Such effects as initial boundary layer expansion at the nozzle lip, reattachment, recompression, choked vent flow, and nonisoenergetic mixing processes are included in the analysis. A unified method was developed and programmed to numerically obtain compatible solutions for the various flow field components in both flight and ground test conditions. Preliminary prediction for a 12-engine space shuttle booster base thermal environment was obtained for a typical trajectory history. Theoretical predictions were also obtained for some clustered-engine experimental conditions. Results indicate good agreement between the data and theoretical predicitons.

Tang, H. H.↗

On the geometric analysis and adjustment of optical satellite observations

Satellite geodesy methods were catagorized into three divisions: geometric, dynamic, and mixed. These catagories furnish the basis for distinction between geometric and dynamic satellite geodesy. The dual adjustment, geometric analysis, and Cartesian coodinate determination are examined for two observing stations. Similar illustrations are given when more than two observing stations are used.

Tsimis, E.↗