Search NASA⌕ Search

SEARCH · Search NASA

Results for “observable behavior”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,783 records · Page 99

Quantitative determination of zero-gravity effects on electronic materials processing germanium crystal growth with simultaneous interface demarcation. Experiment MA-060

Experiment MA-060 was designed to establish the crystal growth and segregation characteristics of a melt in a directional solidification configuration under near zero-g conditions. The interface demarcation technique was incorporated into the experiment since it constitutes a unique tool for recording the morphology of the growth rate throughout solidification, and for establishing an absolute time reference framework for all stages of the solidification process. An extensive study was performed of the germanium crystals grown during the Apollo-Soyuz Test Project mission. It was found that single crystal growth was achieved and that the interface demarcation functioned successfully. There was no indication that convection driven by thermal or surface tension gradients was present in the melt. The gallium segregation, in the absence of gravity, was found to be fundamentally different in its initial and its subsequent stages from that of the ground-based tests. None of the existing theoretical models for growth and segregation can account for the observed segregation behavior in the absence of gravity.

Gatos, H. C.↗

Ames T-3 fire test facility - Aircraft crash fire simulation

There is a need to characterize the thermal response of materials exposed to aircraft fuel fires. Large scale open fire tests are costly and pollute the local environment. This paper describes the construction and operation of a subscale fire test that simulates the heat flux levels and thermochemistry of typical open pool fires. It has been termed the Ames T-3 Test and has been used extensively by NASA since 1969 to observe the behavior of materials exposed to JP-4 fuel fires.

Fish, R. H.↗

Transfer of polarized radiation in self-absorbed synchrotron sources. I - Results for a homogeneous source

The solution to the equation of transfer of polarized radiation in a steady-state homogeneous rarefied medium is applied to self-absorbed synchrotron sources. Relativistic electrons (independent of the presence of any cold plasma) can quite easily produce in such sources significant Faraday rotation and/or conversion of linear to circular polarization. Structural inhomogeneities do not obviate the importance of these phenomena in compact nonthermal sources. Contrary to the calculation of Pacholczyk and Swihart (1975), the circular polarization for a homogeneous source changes sign just below the self-absorption turnover as the source becomes opaque, even when polarization conversion dominates; however, for a physically realistic source, structural inhomogeneity may alter this behavior. The observational evidence bearing upon these effects is reviewed.

Jones, T. W.↗

Icy craters on the Galilean satellites

The high degree of echo depolarization observed for linearly polarized incident waves in the case of radar observations of Europa, Ganymede, and Callisto is consistent with a rough, icy surface. Measurements with circularly polarized waves, however, conducted in 1976 suggest that the types of surface irregularities found on the Galilean satellites must be very different from those on the moon and the inner planets. A description is presented of an investigation in which geometrical optics and the Stokes-vector formalism are employed to examine several possible configurations which could cause the circular polarization transmitted to exceed unity. On the basis of the obtained results it appears that a model which postulates that significant parts of the surfaces of the three satellites are covered with an icy layer at least several kilometers thick and saturated with hemispherical craters can explain nearly all the observed radar behavior.

Ostro, S. J.↗

Evaluation of display and control concepts for a terminal configured vehicle in final approach in a windshear environment

A revised treatment of nonrandom inputs was incorporated in the model. Response behavior was observed for two display configurations (a pictorial EADI presentation and a flight-director configuration requiring use of a panel-mounted airspeed indicator), two control configurations (attitude and velocity control wheel steering), and two shear environments, each of which contained a head-to-tail shear and a vertical component. In general, performance trends predicted by the model were confirmed experimentally. Experimental and analytical results both indicated superiority to the EADI display with respect to regulation of height and airspeed errors. Velocity steering allowed tighter regulation of height errors, but control parameters had little influence on airspeed regulation. Model analysis indicated that display-related differences could be ascribed to differences in the quality of speed-related information provided by the two displays.

Levison, W. H.↗

Investigations of lubricant rheology as applied to elastohydrodynamic lubrication

Measurements of lubricant shear rheological behavior in the amorphous solid region and near the liquid-solid transition are reported. Elastic, plastic and viscous behavior was observed. A shear rheological model based on primary laboratory data is proposed for concentrated contact lubrication. The model is a Maxwell model modified with a limiting shear stress. Three material properties are required: low shear stress viscosity, limiting elastic shear modulus, and the limiting shear stress the material can withstand. All three are functions of temperature and pressure. In applying the model to EHD contacts the predicted response possesses the characteristics expected from several experiments reported in the literature.

Bair, S.↗

Local precision nets for monitoring movements of faults and large engineering structures

Along Bocono Fault were installed local high precision geodetic nets to observe the possible horizontal crustal deformations and movements. In the fault area there are few big structures which are also included in the mentioned investigation. In the near future, measurements shall be extended to other sites of Bocono Fault and also to the El Pilar Fault. In the same way and by similar methods high precision geodetic nets are applied in Venezuela to observe the behavior of big structures, as bridges and large dams and of earth surface deformations due to industrial activities.

Henneberg, H. G.↗

T700 power turbine rotor multiplane/multispeed balancing demonstration

Research was conducted to demonstrate the ability of influence coefficient based multispeed balancing to control rotor vibration through bending criticals. Rotor dynamic analyses were conducted of the General Electric T700 power turbine rotor. The information was used to generate expected rotor behavior for optimal considerations in designing a balance rig and a balance technique. The rotor was successfully balanced 9500 rpm. Uncontrollable coupling behavior prevented observations through the 16,000 rpm service speed. The balance technique is practical and with additional refinement it can meet production standards.

Burgess, G.↗

Surface temperatures and glassy state investigations in tribology, part 2

Measurements of lubricant shear rheological behavior in the amorphous solid region and near the liquid solid transition are reported. Elastic, plastic and viscous behavior was observed. The maximum yield shear stress (limiting shear stress) is a function of temperature and pressure and is believed to be the property which determines the maximum traction in elastohydrodynamic contacts such as traction drives. A shear rheological model based on primary laboratory data is proposed for concentrated contact lubrication. The model is Maxwell model modified with a limiting shear stress. Three material properties are required: low shear stress viscosity, limiting elastic shear modulus, and the limiting shear stress the material can withstand. All three are functions of temperature and pressure.

Bair, S. S.↗

Design, fabrication, and initial test of a fixture for reducing the natural frequency of the Mod-O wind turbine tower

It was desired to observe the behavior of a two bladed wind turbine where the tower first bending natural frequency is less than twice the rotor speed. The system then passes through resonance when accelerating to operating speed. The frequency of the original Mod-O tower was reduced by placing it on a spring fixture. The fixture is adjustable to provide a range of tower bending frequencies. Fixture design details are given and behavior during initial operation is described.

Winemiller, J. R.↗

Fractographic analysis of gaseous hydrogen induced cracking in 18Ni maraging steel

Electron microscope fractographic analysis supplemented an extensive study of the kinetics of gaseous hydrogen assisted cracking in 18Ni maraging steel. Temperature determined the crack path morphology in each steel which, in turn, was directly related to the temperature dependence of the crack growth rate. Crack growth in the low temperature regime proceeded along prior austenite grain boundaries. Increasing the temperature above a critical value produced a continuously increasing proportion of transgranular quasi-cleavage associated with lath martensite boundaries. The amount of transgranular cracking was qualitatively correlated with the degree of temperature-induced deviation from Arrhenius behavior. Fractographic observations are interpreted in terms of hypothesized mechanisms for gaseous hydrogen embrittlement. It is concluded that hydrogen segregation to prior austenite and lath martensite boundaries must be considered as a significant factor in developing mechanisms for gaseous embrittlement of high strength steels.

Gangloff, R. P.↗

Shear strength measurements of lubricants at high pressure

Measurements of lubricant shear rheological behavior in the amorphous solid region and near the liquid-solid transition are reported on three lubricants under pressure. Elastic, plastic and viscous behavior was observed. The maximum yield shear stress (limiting shear stress) is a function of temperature and pressure and is believed to be the property which determines the maximum traction in elastohydrodynamic contacts such as traction drives.

Bair, S.↗

Altitude characteristics of selected air quality analyzers

The effects of altitude (pressure) on the operation and sensitivity of various air quality analyzers frequently flown on aircraft were analyzed. Two ozone analyzers were studied at altitudes from 600 to 7500 m and a nitrogen oxides chemiluminescence detector and a sulfur dioxide flame photometric detector were studied at altitudes from 600 to 3000 m. Calibration curves for altitude corrections to the sensitivity of the instruments are presented along with discussion of observed instrument behavior.

White, J. H.↗

Simultaneous ultraviolet, optical, and X-ray observations of the X-ray source Vela X-1 /HD 77581/

UV spectra (obtained by the IUE) of HD 77581, associated with the binary X-ray source Vela X-1, show a spectrum typical of an early B-type supergiant. However, the P Cygni profiles of strong resonance lines show substantial variations with orbital phase. These variations can be ascribed to the changing ionization state in the stellar wind caused by the X-ray emitting companion. X-ray and spectroscopic and photometric optical observations, simultaneous with the IUE observations, indicate behavior consistent with previous epochs.

Dupree, A. K.↗

Investigation of a method for repairing the hot gas system branch 2 of the Symphonie-Satellite MV2 in orbit

The failure of all engines on the Symphonie MV2 satellite is attributed to blockage of the oxidizer branch caused by metal salts precipitating and forming a gel which constricts the narrow passage. Laboratory tests and other simulations conducted to observe the behavior of artificially produced jellies on a vacuum show that a removal or at least a reduction of the blockage in the oxidizer branch is possible by evacuation. The greatest blockage appears to occur in the filter. This fact restricts the capability to perform repairs in orbit because the filter installed ahead of the valve cannot by subjected to a vacuum.

Braun, H.↗

Two-dimensiosnal electron beam charging model for polymer films

A two dimensional model was developed to describe the charging of thin polymer films exposed to a uniform mon-energetic electron beam. The study was motivated by observed anomalous behavior of geosynchronous satellites which was attributed to electrical discharges associated with the differential charging of satellite surfaces of magnetospheric electrons. Electric fields both internal and external to the irradiated specimen were calculated at steady state in order to identify regions of high electrical stress. Particular emphasis was placed on evaluating the charging characteristics near the material's edge. The model was used to identify and quantify the effects of some of the experimental parameters notably: beam energy; beam angle of incidence; beam current density; material thickness; and material width. Simulations of the following situations were also conducted: positive or negative precharging over part of the surface; a central gap in the material; and a discontinuity in the material's thickness.

Reeves, R. D.↗

Venus nighttime hydrogen bulge

The concentration of atomic hydrogen in the Venus thermosphere near 165 km altitude and approximately 18 deg north latitude has been derived from Pioneer Venus in situ measurements of H(+), O(+), O and CO2 concentrations, under the assumption of chemical equilibrium. Altitude profiles of derived H concentration suggest that chemical equilibrium prevails to an altitude of at least 200 km on the dayside and to 165 km on the nightside. Measurements below these limits were made by the ion and neutral mass spectrometers on the orbiter spacecraft between December 1978 and July 1979, while periapsis traversed a complete diurnal cycle. The hydrogen concentration is found to rise sharply at both terminators from a dayside value of approximately 50,000/cu cm, and to exhibit an asymmetric nightside distribution with a peak density in the predawn sector approximately 400 times greater than the dayside value. Analysis suggests that wind-induced diffusion, combined with exospheric return flow, can account for the observed hydrogen behavior. The large day-night temperature contrast enhances advective transport, which produces the large H concentration diurnal variation; the shift of the H concentration nighttime maximum toward dawn is caused by atmospheric superrotation.

Brinton, H. C.↗

Quantitative determination of zero-gravity effects on electronic materials processing germanium crystal growth with simultaneous interface demarcation experiment MA-060, section 5

The crystal growth and segregation characteristics of a melt in a directional solidification configuration under near zero g conditions were investigated. The germanium (doped with gallium) system was selected because it was extensively studied on Earth and because it lends itself to a very detailed macroscopic and microscopic characterization. An extensive study was performed of the germanium crystals grown during the Apollo-Soyuz Test Project mission. It was found that single crystal growth was achieved and that the interface demarcation functioned successfully. On the basis of the results obtained to date, there is no indication that convection driven by thermal or surface tension gradients was present in the melt. The gallium segregation, in the absence of gravity, was found to be fundamentally different in its initial and its subsequent stages from that of the ground based tests. None of the existing theoretical models for growth and segregation can account for the observed segregation behavior in the absence of gravity.

Gatos, H. C.↗