Search NASA⌕ Search

SEARCH · Search NASA

Results for “phase separation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,783 records · Page 99

Dry etching characteristics of amorphous As{sub 2}S{sub 3} film in CHF{sub 3} plasma

The authors describe the dry etching characteristics of amorphous As{sub 2}S{sub 3} films in CHF{sub 3} plasma and the development of an optimized fabrication process for compact waveguides. The observed etching behavior is due to the relative densities of fluorine atoms, polymer precursors, and ions in the plasma which are controlled by the process parameters. In particular, the flow rate of the CHF{sub 3} gas has a significant influence on the etched profile and surface roughness as well as the etch rate of the As{sub 2}S{sub 3}. The profile evolves from isotropic to vertical with the flow rate due to passivation by increasing polymer deposition on the sidewalls. Such passivation also helps achieve smooth sidewalls because it inhibits differential etching between the phases in the inherently phase-separated As{sub 2}S{sub 3} film, which otherwise results in a grainy and rough etched surface. At the highest flow rate, however, excessive polymer deposition occurs and this results in positive-sloped sidewall and grassy etched surface due to micromasking.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Silicon nanocluster-sensitized emission from erbium: The role of stress in the formation of silicon nanoclusters

Erbium-doped silicon-rich silicon oxide films deposited by plasma enhanced chemical vapor deposition suffer from compressive stress as deposited, which converts to a large tensile stress on annealing due to the release of hydrogen. Although the cracking that results from this stress can be avoided by patterning the films into ridges, significant stress remains along the ridge axis. Measurements of erbium photoluminescence sensitized by silicon nanoclusters in stressed and relaxed films suggest an important role for internal film stresses in promoting the phase separation of excess silicon into nanoclusters, which has previously been thought of as a thermally driven process.

36 MATERIALS SCIENCE↗

Effects of capping on GaN quantum dots deposited on Al{sub 0.5}Ga{sub 0.5}N by molecular beam epitaxy

The impact of the capping process on the structural and morphological properties of GaN quantum dots (QDs) grown on fully relaxed Al{sub 0.5}Ga{sub 0.5}N templates was studied by transmission electron microscopy. A morphological transition between the surface QDs, which have a pyramidal shape, and the buried ones, which have a truncated pyramid shape, is evidenced. This shape evolution is accompanied by a volume change: buried QDs are bigger than surface ones. Furthermore a phase separation into Al{sub 0.5}Ga{sub 0.5}N barriers was observed in the close vicinity of buried QDs. As a result, the buried QDs were found to be connected with the nearest neighbors by thin Ga-rich zones, whereas Al-rich zones are situated above the QDs.

36 MATERIALS SCIENCE↗

Ion Beam Synthesis of Transition Metal Nanoclusters in Silicon

The synthesis of materials combining ferromagnetism and semiconducting properties is of great interest for the development of devices for future electronics. Possible implementations of adding the spin degree of freedom to conventional semiconductors are the formation of diluted magnetic semiconductors (DMS's) and the synthesis of magnetic clusters embedded in semiconducting matrices. Despite the technological importance of Si, the former research has mostly been focused on II-VI, III-V and other compound semiconductors. Beside various layer deposition techniques, ion implantation in combination with subsequent thermal treatment is an excellent way to introduce the necessary high concentration of foreign atoms into the substrate. Especially the formation of magnetic clusters in semiconductors or DMS layers is of interest because they offer the possibility to achieve Curie temperatures above room temperature, which is a drawback of common DMS structures. In the present paper we have studied the formation of MnAs and MnSb nanoclusters in Si by co-implantation of Mn, As and Sb in combination with subsequent thermal annealing. In certain windows of the implantation and annealing parameters both Mn and As or Mn and Sb rich crystalline nanoclusters are formed that are partly phase-separated. The influence of the formation parameters on size, size distribution and composition of the nanocrystals as well as the role of atom diffusion are discussed. Results of magnetic analyses are presented as well.

36 MATERIALS SCIENCE↗

Hybridization and Modification of the Ni/C{sub 60} Composites

Hybridization and thermal evolution of the Ni+C{sub 60} composites, deposited on Si(001) at room temperature, were studied using Scanning Electron Microscopy, {mu}-Raman spectroscopy and Rutherford Backscattering. As-deposited, the hybrid films exhibited a granular nano-structure with Ni nano-particles encapsulated in C{sub 60} polymerized rinds. The Ni and C (C{sub 60}) distributions in a top layer were found homogeneous with a stable Ni/C (C{sub 60}) ratio; in the larger depth the distributions were inhomogeneous and their ratio dramatically varied. At elevated temperatures, all structural parameters were changed. In the subsurface layer Ni- and C (C{sub 60})-rich zones were formed (due to the induced phase separation), C{sub 60}-molecules decayed and their fragments were transformed into amorphous carbon (a-C). The free volume distribution of the stressed hybrid matter was analyzed by the Hg marker that (in a form of vapors) in-diffused in to the samples. The RBS analysis showed that the Hg distribution of the as-deposited films followed the character of distribution of the C (C{sub 60}) component. At elevated temperatures, however, the Hg profiles decreased dramatically (especially in the subsurface layer) suggesting a significant drop-off of the free volume concentration due to the formation of the spatially compact a-C clusters.

36 MATERIALS SCIENCE↗

Solution-processable polymer solar cells from a poly(3-hexylthiophene)/[6,6]-phenyl C{sub 61}-butyric acidmethyl ester concentration graded bilayers

Polymer photovoltaic (PV) device prepared with a vertical phase separation has intensified the research on the effectiveness of the concentration graded active layer. In this paper, a polymer PV device with a poly(3-hexylthiophene)/[6,6]-phenyl C{sub 61}-butyric acidmethyl ester (P3HT/PCBM) bilayers active film with a concentration gradient has been fabricated via solution process. The concentration variation has been confirmed by the Auger spectroscopy. The devices showed an enhanced photocurrent density and power conversion efficiency compared to those of the bulk heterojunction PV prepared under the same fabrication condition.

36 MATERIALS SCIENCE↗

Electron spin resonance study of proton-irradiation-induced defects in graphite

Electron spin resonance measurements of proton-irradiated graphite have revealed detailed nature of proton-irradiation-induced defects. Our results indicate that proton-irradiation creates confined defect regions of a metallic island surrounded by an insulating magnetic region which ''isolates'' the metallic island inside from the metallic graphite background outside. We have thus come up with a picture of phase separation in proton-irradiated graphite comprising three regions of distinct electrical and magnetic properties.

36 MATERIALS SCIENCE↗

Tunable self-organization of nanocomposite multilayers

In this letter we report the controlled growth and microstructural evolution of self-assembled nanocomposite multilayers that are induced by surface ion-impingement. The nanoscale structures together with chemical composition, especially at the growing front, have been investigated with high-resolution transmission electron microscopy. Concurrent ion impingement of growing films produces an amorphous capping layer 3 nm in thickness where spatially modulated phase separation is initiated. It is shown that the modulation of multilayers as controlled by the self-organization of nanocrystallites below the capping layer, can be tuned through the entire film.

36 MATERIALS SCIENCE↗

Effects of Active Layer Thickness and Thermal Annealing on Polythiophene: Fullerene Bulk Heterojunction Photovoltaic Devices

The effect of thermal annealing on photovoltaic devices comprising poly(3-hexylthiophene):[6,6]-phenyl C61 butyric acid methyl ester (P3HT:PCBM) with thicknesses up to 1200 nm was investigated. Without thermal annealing, the efficiency of the as-prepared devices decreased with increasing active layer thickness, reflecting largely a reduction in the short-circuit current density and an inverse photocurrent spectral response. Thermal annealing of the full devices was found to substantially recover thick-film device efficiencies while reducing the thin-film device efficiencies. The profound variations in photovoltaic characteristics were interpreted in terms of vertical phase separation in the P3HT:PCBM blend film and Li+ diffusion from the LiF/Al contact.

Zeng, L↗

Amorphous copper tungsten oxide with tunable band gaps

We report on the synthesis of amorphous copper tungsten oxide thin films with tunable band gaps. The thin films are synthesized by the magnetron cosputtering method. We find that due to the amorphous nature, the Cu-to-W ratio in the films can be varied without the limit of the solubility (or phase separation) under appropriate conditions. As a result, the band gap and conductivity type of the films can be tuned by controlling the film composition. Unfortunately, the amorphous copper tungsten oxides are not stable in aqueous solution and are not suitable for the application of photoelectrochemical splitting of water. Nonetheless, it provides an alternative approach to search for transition metal oxides with tunable band gaps.

36 MATERIALS SCIENCE↗

Stress-induced Sn Nanowires from Si-Sn Nanocomposite Coatings

The growth of stress-induced tin (Sn) whiskers has been considered responsible for the failure of many electronic devices and many approaches have been developed to mitigate their growth. In this report, however, we describe a simple approach based on the same mechanism to promote the growth of Sn nanowires. The thermal expansion induced stress was utilized as the driving force to initiate the growth of Sn nanowires from Si-Sn phase-separated nanocomposite coatings. The nanostructure of the Si-Sn matrix was the key to controlling the shape and diameter of Sn nanowires. This approach provides additional flexibility for making desirable metallic nanowires with controlled dimensions.

36 MATERIALS SCIENCE↗

Effect of annealing and Nd concentration on the photoluminescence of Nd{sup 3+} ions coupled with silicon nanoparticles

We report on the microstructure and photoluminescence (PL) properties of Nd-doped SiO{sub 2} thin films containing silicon nanoparticles (Si-np) as a function of the annealing temperature and the Nd concentration. The thin films, which were grown on Si substrates by reactive magnetron co-sputtering, contain the same Si excess. Fourier transform infrared (FTIR) spectra show that a phase separation occurs during the annealing due to the agglomeration of the Si excess resulting in the formation of Si-np. Besides, after annealing, the films exhibit PL from excitonic states confined in Si-np. We showed that the intensity of the PL of Nd{sup 3+} ions that occurs at {approx}0.92, 1.06, and 1.4 {mu}m is maximal at low Nd concentration and while well-passivated Si-np are formed. FTIR and x-ray measurements showed that the increase in the Nd incorporation has detrimental effects on the PL of Nd{sup 3+} because of the formation of Nd{sub 2}O{sub 3} nanocrystals and inherent disorder in the SiO{sub 2} host matrix. PL excitation measurements demonstrate that the PL of Nd{sup 3+} ions is nonresonant and follows the excitation of Si-np giving new evidence of the energy transfer from Si-np toward the rare earth ions.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Investigation of emitting centers in SiO{sub 2} codoped with silicon nanoclusters and Er{sup 3+} ions by cathodoluminescence technique

This study reports on the investigation and characterization of the different emitting centers within SiO{sub 2} codoped by Er{sup 3+} ions and silicon-excess. Erbium doped silicon-rich silicon oxide (SRSO:Er) thin films, fabricated by magnetron cosputtering at 500 deg. C, were analyzed by means of cathodoluminescence. The CL spectra of SRSO, Er-doped SiO{sub 2} and SRSO:Er were recorded and compared for various annealing temperatures. It was found that some specific optically-active point-defects called silicon-oxygen-deficient centers (SiODCs) are present in all kinds of samples. In the layers containing some excess Si, the phase separation between Si nanoclusters (Si-ncs) and SiO{sub 2} is observed when the annealing temperature reaches and exceeds 900 deg. C. The formation of Si-nc increases with annealing at the expense of SiODCs that was assumed to act as seeds for the growth of Si-nc. For SRSO:Er samples, the contribution of SiODCs overlaps that due to Er{sup 3+} transitions in the visible range. The emissions from SiODCs are drastically reduced when an SRSO sample is doped with Er ions, whereas the Er emissions in the visible range start to be distinctly observed. We propose a scenario of energy transfer from SiODCs toward the Er ions, especially as the emissions from the Si-based entities (SiODCs, Si-nc) and from some transitions of Er ions are located in a same visible broad range.

36 MATERIALS SCIENCE↗

Enhancement of local electrical conductivities in SiC by femtosecond laser modification

Enhancement of local electric conductivities induced by femtosecond laser modification in silicon carbide was studied. Current-voltage (I-V) characteristics of the laser-modified regions were measured between the ion-implanted metal contacts. Interestingly, the resistance sharply decreased in the fluence range from 5.0 to 6.7 J/cm{sup 2}. The resistance at the irradiation fluence of 53 J/cm{sup 2} decreased by more than six orders of magnitude compared with the nonirradiated one. From the I-V characteristics and the scanning electron microscope observations, we conclude that the phase separation associate with the formation of classical laser induced periodic structure causes the drastic increase in electric conductivity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Atomistic simulations of Au-silica nanocomposite film growth

The growth of Au-silica nanocomposite film is simulated in the framework of kinetic three dimensional lattice Monte Carlo simulations considering the basic phenomena in the deposition process. In case of co-sputter deposition, the growth kinetics of nanoparticles has been studied taking into consideration the effect of the energetic sputtered species reaching the surface of the film during deposition. Formation of Au nanorod like structures are predicted under certain growth conditions particularly when surface diffusion assisted phase separation plays the dominant role and bulk kinetics is frozen. The observed dependence of the Au nanoparticle size on Au/silica ratio is in agreement with the experimental results.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Fabrication Of Buried Self-Organized Stripes In The Ni/C{sub 60} Composite

A periodic array of striped nanoscopic domains, embedded in the epitaxially grown Ni layer, was formed after thermal annealing of the Ni/Ni+C{sub 60}/C{sub 60}/Ni thin multilayer sequence deposited on the MgO(001) monocrystal. The composite was annealed in 100 deg. C/1 hr increments in the range of 200-600 deg. C, and the structural evolution of the composite was analyzed mainly by Rutherford Backscattering and Scanning Electron Microscopy. The periodic system of the stripes was revealed after annealing at 600 deg. C. The possible mechanism of the domain formation is suggested as follows: temperatures below 500 deg. C incite diffusion (and consecutive disintegration) of the C{sub 60} molecules; temperatures above 500 deg. C induce forceful intermixing of the upper Ni/Ni+C{sub 60}/C{sub 60} layers; due to the pronounced immiscibility of the Ni and C (C{sub 60}) components the process of the phase separation is triggered. In the confined crystalline matrix of the buffer Ni layer the separation proceeds coordinately according to the Ni lattice template - the stripe domains are formed in a direction parallel to the main crystallographic orientation (001) of the Ni epilayer.

36 MATERIALS SCIENCE↗

Surface Detection in a STXM Microscope

We have modified scanning transmission x-ray microscopes (STXM) at the Canadian Light Source and the Advanced Light Source with total electron yield (TEY) detection (TEY-STXM). This provides improved surface-sensitive detection, simultaneous with existing bulk-sensitive transmission detection in the STXM microscopes. We have explored sample-current and channeltron-based electron yield detection. Both approaches provide improved surface sensitive imaging and spectroscopy, although channeltron-based detection is superior. TEY-STXM provides surface sensitive imaging of ultrathin films such as phase-separated Langmuir-Blodgett monolayer films, as well as differentiation of surface and bulk oxides of patterned metallic thin films. This paper will outline the experimental challenges of this method and the opportunities for correlative surface and bulk measurements of complex samples.

07 ISOTOPE AND RADIATION SOURCES↗

On the solubility of yttrium in RuO{sub 2}

We have investigated the solubility of Y in rutile RuO{sub 2} using experimental and theoretical methods. Nanostructured Ru-Y-O thin films were synthesized via combinatorial reactive sputtering with an O/metal ratio of 2.6 and a Y content of 0.3 to 12.6 at. %. A solubility limit of 1.7 at. % was identified using x-ray photoelectron spectroscopy and x-ray diffraction. Based on ab initio and thermodynamic modeling, the solubility of Y can be understood. Smaller Y amounts are incorporated into the lattice, forming a metastable film, with local structural deformations due to size effects. As the Y content is increased, extensive local structural deformations are observed, but phase separation does not occur due to kinetic limitations. Nanostructured RuO{sub 2} alloyed with Y might lead to enhanced phonon scattering and quantum confinement effects, which in turn improve the thermoelectric efficiency.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗