Search NASA⌕ Search

SEARCH · Search NASA

Results for “shape”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,783 records · Page 99

A Pulse Shape Analysis Technique for the MAJORANA Experiment

In order to achieve background count rates sufficiently low as to allow the observation of rare events such as neutrinoless double beta (0 ) decay, background suppression techniques are routinely employed. In this paper we present details of a novel Pulse Shape Analysis algorithm which allows single-site events such as 0 decay to be distinguished from multi site background events. The algorithm, which is based on the event by event 2 fitting of experimental signals to a basis data set of unique single site pulse shapes, has been developed through simulation studies and tested experimentally using a Broad Energy Germanium detector. It is found experimentally that the technique is able to successfully identify and reject 99% of multi site events in the single escape peak associated with the gamma decay of 208Tl, whilst maintaining a survival probability of 98% for '0 like' double escape peak events.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Plutonium metal vs. oxide determination with the pulse-shape-discrimination-capable plastic scintillator EJ-299-33

Neutron measurements can be used to distinguish plutonium in metal or oxide form, a capability that is of great interest in nuclear nonproliferation, treaty verification, and other applications. This paper describes measurements performed on well-characterized samples of plutonium oxide and plutonium metal using the pulse-shape-discrimination-capable plastic scintillator EJ-299-33. Results are compared to those obtained with a same-sized detector cell using the liquid scintillator EJ-309. The same optimized, digital pulse shape discrimination technique is applied to both detectors and the neutron pulse height distributions are compared. Results show that the EJ-299-33 plastics can be successfully used for plutonium measurements, where the gamma ray to neutron detection ratio is much higher than for typical radioactive sources. Results also show that EJ-299-33 detectors can be used to characterize plutonium samples, specifically to discriminate between plutonium metal and oxide.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Organic liquid scintillation detector shape and volume impact on radiation portal monitors

We have developed and tested a radiation portal monitor using organic liquid scintillation detectors. In order to optimize our system designs, neutron measurements were carried out with three organic liquid scintillation detectors of different shapes and sizes, along with a 3 He radiation portal monitor (RPM) as a reference. The three liquids tested were a 7.62 cm diameter by 7.62 cm length cylindrical active volume organic liquid scintillation detector, a 12.7 cm diameter by 12.7 cm length cylindrical active volume organic liquid scintillation detector, and a 25 cm by 25 cm by 10 cm “paddle” shaped organic liquid scintillation detector. Background and Cf-252 neutron measurements were recorded to allow for a comparison of neutron intrinsic efficiencies as well as receiver operating characteristics (ROC) curves between detectors. The 12.7 cm diameter cylindrical active volume organic liquid scintillation detector exhibited the highest intrinsic neutron efficiency (54%) of all three liquid scintillators. An ROC curve analysis for a heavily moderated Cf-252 measurement showed that using the 12.7 cm diameter by 12.7 cm length cylindrical active volume Eljen EJ309 organic liquid scintillation detector would result in the fewest needed detector units in order to achieve a near 100% positive neutron alarm rate while maintaining a better than 1 in 10,000 false alarm rate on natural neutron background. As a result, a small number of organic liquid scintillation detectors could therefore be a valid alternative to 3 He in some RPM applications.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Pulse-shape discrimination and energy quenching of alpha particles in Cs 2 LiLaBr 6 :Ce 3+

Cs 2 LiLaBr 6 :Ce 3+ (CLLB) is an elpasolite scintillator that offers excellent linearity and gamma-ray energy resolution and sensitivity to thermal neutrons with the ability to perform pulse-shape discrimination (PSD) to distinguish gammas and neutrons. Our investigation of CLLB has indicated the presence of intrinsic radioactive alpha background that we have determined to be from actinium contamination of the lanthanum component. We measured the pulse shapes for gamma, thermal neutron, and alpha events and determined that PSD can be performed to separate the alpha background with a moderate figure of merit of 0.98. Here, we also measured the electron-equivalent-energy of the alpha particles in CLLB and simulated the intrinsic alpha background from 227 Ac to determine the quenching factor of the alphas.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Electroluminescence pulse shape and electron diffusion in liquid argon measured in a dual-phase TPC

Here, we report the measurement of the longitudinal diffusion constant in liquid argon with the DarkSide-50 dual-phase time projection chamber. The measurement is performed at drift electric fields of 100 V/cm, 150 V/cm, and 200 V/cm using high statistics $^{39}$Ar decays from atmospheric argon. We derive an expression to describe the pulse shape of the electroluminescence signal (S2) in dual-phase TPCs. The derived S2 pulse shape is fit to events from the uppermost portion of the TPC in order to characterize the radial dependence of the signal. The results are provided as inputs to the measurement of the longitudinal diffusion constant DL, which we find to be (4.12 $\pm$ 0.04) cm$^2$/s for a selection of 140keV electron recoil events in 200V/cm drift field and 2.8kV/cm extraction field. To study the systematics of our measurement we examine datasets of varying event energy, field strength, and detector volume yielding a weighted average value for the diffusion constant of (4.09 $\pm$ 0.09) cm$^2$ /s. The measured longitudinal diffusion constant is observed to have an energy dependence, and within the studied energy range the result is systematically lower than other results in the literature.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

A position and pulse shape discriminant p -terphenyl detector module

We present the development of a neutron detector array module made with para-terphenyl, a bright, fast, n/γ discriminating crystalline organic scintillator. The module is comprised of 2 cm × 2 cm × 2 cm p-terphenyl crystals that have been optically coupled together to create a pseudo-bar module. While only relying on two photo detectors, the module is capable of distinguishing interactions between up to eight crystals. Furthermore, the module retains the p-terphenyl’s pulse shape discrimination (PSD) capability. Together this makes the pseudo-bar module a promising position-sensitive neutron detector. Here we present characteristics of the pseudo-bar module - its timing resolution as well as its pulse shape and position discrimination capabilities, and briefly discuss future plans for utilizing an array of pseudo-bar modules in a useful neutron detector system.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Precompensation of gain nonuniformity in a Nd:glass amplifier using a programmable beam-shaping system

A programmable liquid crystal beam-shaping system was installed for a 200-mJ optical parametric chirped-pulse amplification (OPCPA) system front end and was applied to dramatically improve the beam uniformity in the subsequent amplifier. A highly nonuniform beam profile caused by gain inhomogeneity in the amplifier was pre-compensated by the beam shaping system using significantly improved open-loop and closed-loop algorithms. The details of the improved algorithms will be described. The issues of running a liquid crystal device with a high-energy, ultrashort-pulse laser, such as damage risk and temporal contrast degradation, will be addressed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

High-speed three-dimensional shape measurement using geometry-constraint-based number-theoretical phase unwrapping

In this study, we propose a high-speed three-dimensional (3-D) shape measurement technique for dynamic scenes using geometry-constraint-based number-theoretical phase unwrapping. As a classical algorithm for temporal phase unwrapping (TPU), the number-theoretical approach is suitable for the binary defocusing fringe projection system since it can retrieve an absolute phase without using low-frequency fringe patterns. However, the conventional number-theoretical TPU approach cannot provide sufficient stability to unwrap a high-frequency phase since it requires the two fringe frequencies to be coprime within the global range of the projector coordinate. In contrast, using low-frequency fringe patterns tends to make phase unwrapping more reliable, but at the expense of the measurement precision. By introducing depth constraint into the traditional number-theoretical TPU, we only need to eliminate the phase ambiguity of each pixel within a small period range defined by the depth range, which means that our method just requires the two fringe frequencies to be coprime within the local period range instead of the conventional global range. Due to the reduction of fringe order candidates and the unambiguous phase range, the reliability of phase unwrapping can be significantly improved compared with the traditional number-theoretical TPU approach even when high-frequency fringe patterns are used. The proposed method has been successfully implemented on a high-frame-rate fringe projection system, achieving high-precision, robust, and absolute 3-D shape measurement at 3333 frames per second.

42 ENGINEERING↗

Impact of nanoparticle size and shape on selective surface segregation in polymer nanocomposites

A study of the impact of the size and shape of a nanoparticle on the evolution of structure and surface segregation in polymer nanocomposite thin films is presented. This is realized by monitoring the evolution of structure with thermal annealing and equilibrium depth profile of a deuterated polystyrene/ protonated polystyrene bilayer in the presence and absence of various nanoparticles. For the three shapes examined, sheet-like graphene, cylindrical carbon nanotubes, and spherical soft nanoparticles, the presence of the nanoparticles slowed the inter-diffusion of the polymers in the thin film. The larger nanoparticles slowed the polymer motion the most, while the smaller spherical nanoparticles also significantly inhibited polymer chain diffusion. At equilibrium, the soft spherical nanoparticles, which are highly branched, segregate to the air surface, resulting in a decrease in the excess deuterated PS at the surface. The graphene sheets and single walled carbon nanotubes, on the other hand, enhanced the dPS segregation to the air surface. The graphene sheets were found to segregate to the silicon surface, due to their higher surface energy. Interpretation of these results indicates that entropic factors drive the structural development in the nanocomposite thin films containing the spherical nanoparticles, while a balance of the surface energies of the various components (i.e. enthalpy) controls the thin film structure formation in the polymer-carbon nanoparticle nanocomposites.

nanocomposite↗

A visco-plastic constitutive model for accurate densification and shape predictions in powder metallurgy hot isostatic pressing

Powder metallurgy hot isostatic pressing (PM-HIP) is an advanced manufacturing process that produces near net shape parts with high material utilization and uniform microstructures. Despite being used frequently to produce small-scale components, the application of PM-HIP to large-scale components is limited due to inadequate understanding of its complex mechanisms that cause unpredictable post-HIP shape distortions. A computational model can provide necessary information about the intermediate and final stages of the HIP process that can help understand it better and make accurate predictions. Generally, two types of computational models are employed for PM-HIP of metal powders, namely, plastic and visco-plastic models. Between these, the plastic model is preferred due to its cheaper calibration approach requiring less experimental data. However, the plastic model sometimes produces incorrect predictions when slight variations of the HIP conditions are encountered in practical situations. Therefore, this work presents a visco-plastic model that addresses these limitations of the plastic model. A novel modified calibration approach is employed for the visco-plastic model that utilizes less experimental data than existing approaches. With the new approach, the data requirement is same for both plastic and visco-plastic models. This also enables a quantitative comparison of plastic and visco-plastic models, which have been only qualitatively compared in the past. When calibrated with the same experimental data, both the models are found to produce similar results. In conclusion, the calibrated visco-plastic model is applied to several complex geometries, and the predictions are found to be in good agreement with experimental observations.

Hot isostatic pressing↗

A fast and robust computational modeling approach for density and shape predictions in powder metallurgy hot isostatic pressing

Powder metallurgy hot isostatic pressing (PM-HIP) is an advanced manufacturing process that produces near-net-shape parts with high material utilization and uniform microstructures. PM-HIP is frequently used for producing small-scale parts with complicated geometries and is potentially economical for producing large-scale parts. However, excessive post-HIP shape distortions can reduce its effectiveness and economic advantage, especially for larger parts. A PM-HIP computational model can predict and help mitigate these distortions. However, due to complex deformation mechanisms and thermo-mechanical coupling present in PM-HIP processes, these non-linear computational models sometimes become numerically unstable. The numerical instabilities in these models can lead to very slow convergence or no convergence at all, which often translates to slow and unreliable models. These limitations are more pronounced in large models with complicated geometries. Hence, in this work, an alternative modeling approach is presented that improves numerical stability and computational performance. The presented approach achieves these improvements through approximating the fully coupled thermo-mechanical PM-HIP model as a decoupled model and adding inertial damping to the model’s mechanical part. In conclusion, a comparison with the fully coupled model indicated a slight dip in prediction accuracy (<5% error) but significant improvements in numerical stability (>20 times larger time step size) and computational performance (5-10 times speed-up with less computational resource usage) when using the presented approach.

Hot isostatic pressing↗

Additive manufacturing of near-net-shape bonded magnets: Prospects and challenges

Additive manufacturing (AM) or 3D printing is well known for producing arbitrary shaped parts without any tooling required, offering a promising alternative to the conventional injection molding method to fabricate near-net-shaped magnets. In order to determine their applicability in the fabrication of Nd-Fe-B bondedmagnets, we compare two 3D printing technologies, namely binder jetting and material extrusion. Some prospects and challenges of these state-of-the-art technologies for large-scale industrial applications will be discussed.

36 MATERIALS SCIENCE↗

Shape-persistent phthalocyanine cages

Phthalocyanine (Pc), an electro-redox active moiety, has many attractive properties stemming from its large aromatic system and ability to act as a catalyst in electrochemical reactions, such as the CO 2 reduction reaction (CO 2 RR). However, due to the synthetic challenge related to geometric requirements and poor solubility (strong aggregation), discrete shape-persistent cages consisting of site-isolated, readily accessible Pc moieties have not been available. Here, we report the synthesis of Zn- and Ni-metallated Pc-based molecular cages via one-step dynamic spiroborate linkage formation in high yields. The ZnPc cage structure is unambiguously elucidated at the atomic level by single-crystal X-ray diffraction. Moreover, owing to the site-isolated redox-active metal centers, readily accessible intrinsic cavity, and shape-persistent backbone, the Ni-metallated Pc (NiPc) cage exhibits high catalytic efficiency, selectivity, and stability, superior to the non-caged control molecules in electrocatalytic CO 2 RR.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Constructing nested coordinates inside strongly shaped toroids using an action principle

A new approach for constructing polar-like boundary-conforming coordinates inside a toroid with strongly shaped cross-sections is presented. A coordinate mapping is obtained through a variational approach, which involves identifying extremal points of a proposed action in the mapping space from [0,2π] 2 ×[0,1] to a toroidal domain in $\mathbb{R}$ 3 . This approach employs an action built on the squared Jacobian and radial length. Extensive testing is conducted on general toroidal boundaries using a global Fourier–Zernike basis via action minimisation. The results demonstrate successful coordinate construction capable of accurately describing strongly shaped toroidal domains. The coordinate construction is successfully applied to the computation of three-dimensional magnetohydrodynamic equilibria in the GVEC code where the use of traditional coordinate construction by interpolation from the boundary failed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Complex Fluorine Chemical Potential Effects on the Shape and Compositional Heterogeneity of KTa 1– x Nb x O 3 Nanoparticles

When kinetic conditions dominate and dictate the growth in a nanoparticle synthesis, properties of the synthesis environment can have considerable effects on the properties of the products. Such effects were studied here, where the solution environment was changed via the addition of KF to the hydrothermal syntheses of KTa 1– x Nb x O 3 and KTaO 3 . One result demonstrated the straightforward cause-and-effect relationship between the solution and reaction kinetics: KF directly increased the solution stability of the Ta species and therefore decreased its reaction rate, resulting in a change in composition heterogeneity of Ta and Nb in the KTa 1– x Nb x O 3 particles. However, not all effects are so simple; changing the chemical potential of the solution with KF can also promote the formation of particles with anisotropic defect enhanced kinetic Wulff shapes instead of cuboidal shapes. The increased F chemical potential in the solution enabled the formation of planar defects in the bulk, which accelerated growth in-plane to form particles characterized by flat rectangular flake geometries. In this work, thermodynamic modeling with density functional theory calculations confirmed that sufficient KF concentrations can drive the formation of a defect phase K n +1 Ta n O 3 n F.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ultrafast excited-state dynamics in shape- and composition-controlled gold–silver bimetallic nanostructures

In this paper, we have examined the ultrafast dynamics of shape- and composition-controlled bimetallic Au/Ag core/shell nanostructures with transient absorption spectroscopy (TAS) as a function of Ag layer thickness (0–15 nm) and pump excitation fluence (50–500 nJ/pulse). Our synthesis approach generated both bimetallic nanocubes and nanopyramids with distinct dipolar plasmon resonances and plasmon dephasing behavior at the resonance. Lifetimes obtained from TAS at low powers (50 nJ/pulse) demonstrated minimal dependence on the Ag layer thickness, whereas at high power (500 nJ/pulse) a rise in electron–phonon coupling lifetime (τ 1 ) was observed with increasing Ag shell thickness for both nanocubes and nanopyramids. This is attributable to the stronger absorption of the 400 nm pump pulse with higher Ag content, which induced higher electron temperatures. The phonon–phonon scattering lifetime (τ 2 ) also rises with increasing Ag layer, contributed both by the increasing size of the Au/Ag nanostructures as well as by surface chemistry effects. Further, we observed that even the thinnest, 2 nm, Ag shell strongly impacts both τ 1 and τ 2 at high power despite minimal change in overall size, indicating that the nanostructure composition also strongly impacts the thermalization temperature following absorption of 400 nm light. We also observed a shape-dependent trend at high power, where τ 2 increased for the nanopyramids with increasing Ag shell thickness and nanostructure size, but bimetallic nanocubes demonstrated an unexpected decrease in τ 2 for the thickest, 15 nm, Ag shell. This was attributed to the larger number of corners and edges in the nanocubes relative to the nanopyramids.

36 MATERIALS SCIENCE↗

Temperature-Tuned Faceting and Shape Changes in Liquid Alkane Droplets

Recent extensive studies reveal that surfactant-stabilized spherical alkane emulsion droplets spontaneously adopt polyhedral shapes upon cooling below a temperature T d while remaining liquid. Further cooling induces the growth of tails and spontaneous droplet splitting. Two mechanisms were offered to account for these intriguing effects. One assigns the effects to the formation of an intradroplet frame of tubules consisting of crystalline rotator phases with cylindrically curved lattice planes. The second assigns the sphere-to-polyhedron transition to the buckling of defects in a crystalline interfacial monolayer, known to form in these systems at some T s > T d . The buckling reduces the extensional energy of the crystalline monolayer’s defects, unavoidably formed when wrapping a spherical droplet by a hexagonally packed interfacial monolayer. The tail growth, shape changes, and droplet splitting were assigned to the decrease and vanishing of surface tension, γ. Here we present temperature-dependent γ(T), optical microscopy measurements, and interfacial entropy determinations for several alkane/surfactant combinations. We demonstrate the advantages and accuracy of the in situ γ(T) measurements made simultaneously with the microscopy measurements on the same droplet. The in situ and coinciding ex situ Wilhelmy plate γ(T) measurements confirm the low interfacial tension, ≲0.1 mN/m, observed at T d . Here, our results provide strong quantitative support validating the crystalline monolayer buckling mechanism.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Minireview - Microtubules and Tubulin Oligomers: Shape Transitions and Assembly by Intrinsically Disordered Protein Tau and Cationic Biomolecules

In this minireview, which is part of a special issue in honor of Jacob N. Israelachvili’s remarkable research career on intermolecular forces and interfacial science, we present studies of structures, phase behavior, and forces in reaction mixtures of microtubules (MTs) and tubulin oligomers with either intrinsically disordered protein (IDP) Tau, cationic vesicles, or the polyamine spermine (4+). Bare MTs consist of 13 protofilaments (PFs), on average, where each PF is made of a linear stack of αβ-tubulin dimers (i.e., tubulin oligomers). We begin with a series of experiments which demonstrate the flexibility of PFs toward shape changes in response to local environmental cues. First, studies show that MT-associated protein (MAP) Tau controls the diameter of microtubules upon binding to the outer surface, implying a shape change in the cross-sectional area of PFs forming the MT perimeter. The diameter of a MT may also be controlled by the charge density of a lipid bilayer membrane that coats the outer surface. We further describe an experimental study where it is unexpectedly found that the biologically relevant polyamine spermine (+4e) is able to depolymerize taxol-stabilized microtubules with efficiency that increases with decreasing temperature. This MT destabilization drives a dynamical structural transition where inside-out curving of PFs, during the depolymerization peeling process, is followed by reassembly of ring-like curved PF building blocks into an array of helical inverted tubulin tubules. We finally turn to a very recent study on pressure–distance measurements in bundles of MTs employing the small-angle X-ray scattering (SAXS)-osmotic pressure technique, which complements the surface-forces-apparatus technique developed by Jacob N. Israelachvili. Furthermore, these latter studies are among the very few which are beginning to shed light on the precise nature of the interactions between MTs mediated by MAP Tau in 37 °C reaction mixtures containing GTP and lacking taxol.

59 BASIC BIOLOGICAL SCIENCES↗