Search NASA⌕ Search

SEARCH · Search NASA

Results for “structure changes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,783 records · Page 99

Correlative acoustic time-of-flight spectroscopy and X-ray imaging to investigate gas-induced delamination in lithium-ion pouch cells during thermal runaway

It remains difficult to detect internal mechanical deformation and gas-induced degradation in lithium-ion batteries, especially outside specialized diagnostics laboratories. In this work, we demonstrate that electrochemical acoustic time-of-flight (EA-ToF) spectroscopy can be used as an insightful and field-deployable diagnostic/prognostic technique to sense the onset of failure. A 210 mAh commercial lithium-ion cell undergoing thermal abuse testing is probed with in situ and operando EA-ToF spectroscopy, together with simultaneous fractional thermal runaway calorimetry (FTRC) and synchrotron X-ray imaging. The combination of X-ray imaging and EA-ToF analysis provides new understanding into the through-plane mechanical deformation in lithium-ion batteries through direct visualisation and the acoustic ToF response. Internal structural changes, such as gas-induced delamination, are identified using EA-ToF spectroscopy due to variations in the attenuation and signal peak shifts. This is corroborated using X-ray imaging, demonstrating EA-ToF spectroscopy as a promising technique for detecting onset of battery failure.

25 ENERGY STORAGE↗

Precipitation of ALn(CO{sub 3}){sub 2},xH{sub 2}O and Dy{sub 2}(CO{sub 3}){sub 3},xH{sub 2}O compounds from aqueous solutions for A{sup +}=Li{sup +},Na{sup +},K{sup +},Cs{sup +},NH{sub 4}{sup +} and Ln{sup 3+}=La{sup 3+},Nd{sup 3+},Eu{sup 3+},Dy{sup 3+}

Double carbonates of lanthanide (Ln) and alkaline or ammonium (A) ions, noted ALn(CO{sub 3}){sub 2},xH{sub 2}O, were precipitated from concentrated A{sub 2}CO{sub 3} aqueous solutions at room temperature and atmospheric pressure. Twelve hydrated compounds out of the twenty targeted ones have been obtained: Li(NdorEu)(CO{sub 3}){sub 2}, NaLa(CO{sub 3}){sub 2}, KNd(CO{sub 3}){sub 2},xH{sub 2}O, Cs(LaorNd)(CO{sub 3}){sub 2}, NH{sub 4}(Nd,EuorDy)(CO{sub 3}){sub 2}, Dy{sub 2}(CO{sub 3}){sub 3} from concentrated A{sub 2}CO{sub 3} solutions and Na(Nd,EuorDy)(CO{sub 3}){sub 2} from concentrated AHCO{sub 3} solutions. Although the trivalent lanthanide ions are often considered as analogs in solution, differences in their precipitation behaviour was observed, which is believed to have a kinetic origin in relation to the small differences in their ionic radii. The solid compounds were characterised by elemental analyses, thermogravimetry (TG), X-ray diffraction (XRD) and scanning electron microscope-energy dispersive spectroscopy (SEM-EDS). The powder diffraction patterns of nine solids were fitted using the tetragonal P4/mmmLaue class: LiNd(CO{sub 3}){sub 2},xH{sub 2}O: a=(12.16{+-}0.02)A, c=(9.21{+-}0.02)A, LiEu(CO{sub 3}){sub 2},3H{sub 2}O: a=(12.201{+-}0.007)A, c=(9.23{+-}0.01)A, KNd(CO{sub 3}){sub 2},xH{sub 2}O: a=(13.28{+-}0.04)A, c=(10.00{+-}0.04)A, CsLa(CO{sub 3}){sub 2},xH{sub 2}O: a=(10.82{+-}0.02)A, c=(8.18{+-}0.02)A, CsNd(CO{sub 3}){sub 2},xH{sub 2}O: a=(10.81{+-}0.07)A, c=(8.16{+-}0.07)A for NaLn(CO{sub 3}){sub 2},xH{sub 2}O: a=(11.10+1.75r{sub Ln{sup 3}{sup +}})A and c=(8.60+1.13r{sub Ln{sup 3+}})A, where r{sub Ln{sup 3+}} is the ionic radius of Ln{sup 3+} for a coordination number of 8 (r{sub La{sup 3+}}=1.16A, r{sub Nd{sup 3+}}=1.12A, r{sub Eu{sup 3+}}=1.07A and r{sub Dy{sup 3+}}=1.03A). It is proposed that all the NaLn(CO{sub 3}){sub 2},xH{sub 2}O compounds are of very similar structure, as evidenced by their XRD patterns and by the linear variations of the lattice parameters with r{sub Ln{sup 3+}}. The small differences in the lattice parameters can induce large modification of the precipitation pathways. Conversely, structural changes were evidenced within the A{sup +} series for ANd(CO{sub 3}){sub 2},xH{sub 2}O. Dy{sub 2}(CO{sub 3}){sub 3},xH{sub 2}O was also obtained as a by-product. Its lattice parameters are in good agreement with Eu{sub 2}(CO{sub 3}){sub 3},3H{sub 2}O ones. - Linear relationships between the ionic radii of the lanthanides and the unit cell parameters of the corresponding NaLn(CO{sub 3}){sub 2},xH{sub 2}O compounds, extracted from three different studies (our experimental data (black) are compared with those of Mochizuki et al. (red) and Runde et al. (blue))

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural and electronic phase transitions in Sr{sub 1-x}Ce{sub x}MnO{sub 3} perovskites

The structures of eight members of the series Sr{sub 1-x}Ce{sub x}MnO{sub 3} with 0.075{<=}x{<=}0.4 have been established using synchrotron X-ray powder diffraction. These exhibit the sequence of structures (cubic)/(Pm3-barm) {yields}{sup x{approx}}{sup 0.08}(tetragonal)/(I4/mcm) {yields}{sup x{approx}}{sup 0.35}(orthorhombic)/(Imma) with increasing Ce content. Unusual peak broadening due to domain wall scattering is observed near the composition-induced first-order cubic-tetragonal transition. The temperature dependence of the structures for three examples x=0.1, 0.2 and 0.35 is described. For the x=0.1 and 0.35 samples evidence for a first-order loss of the orbital ordering associated with a cooperative Jahn-Teller distortion is presented. The onset of the orbitally disordered state is accompanied by a discontinuous reduction in cell volume. - Graphical abstract: The presence of small amounts of trivalent Mn in the series Sr{sub 1-x}Ce{sub x}MnO{sub 3} has a dramatic effect on the structure, with the structure changing from cubic to tetragonal and finally orthorhombic. The orbital ordering present at room temperature is lost upon heating.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis and characterization of MnPS{sub 3} for hydrogen sorption

Single phase MnPS{sub 3} powder was prepared by solid state reaction between Mn, S and P carried out at 650 deg. C in evacuated silica tube. The structure, morphology and sorption characteristics of the prepared solid were investigated. The results revealed that the obtained MnPS{sub 3} compound was capable of adsorbing 3.5 wt% hydrogen at -193 deg. C and a pressure of 30 bar. Little amount of hydrogen (0.07 wt%) was adsorbed at room temperature. The hydrogen adsorption/desorption cycles at various temperatures did not result in irreversible chemical structural changes of the MnPS{sub 3} compound, but the microstructure after hydrogen cycling diminished and became finer. - Graphical abstract: Atomic building of MPS{sub 3}

36 MATERIALS SCIENCE↗

Anisotropic compression of a synthetic potassium aluminogermanate zeolite with gismondine topology

Compression behavior of a potassium aluminogermanate with a gismondine framework topology (K-AlGe-GIS) was studied using in-situ high-pressure synchrotron X-ray powder diffraction. In contrast to the potassium gallosilicate analogue (K-GaSi-GIS), no elastic anomaly due to pressure-induced hydration and/or cation relocation was observed in K-AlGe-GIS. The Birch-Murnaghan fit to the pressure-volume data results in a bulk modulus of B{sub 0} = 31(1) GPa. The derived linear-axial compressibilities (i.e., {beta}{sub a} = 0.0065(5) GPa{sup -1}, {beta}{sub b} = 0.0196(4) GPa{sup -1}, {beta}{sub c} = 0.0081(7) GPa{sup -1}) indicate that the b-axis, normal to the 8-ring channels, is about three times more compressible than the a and c axes, parallel to the elliptical 8-ring channels. As a consequence a gradual flattening of the so-called 'double crankshaft' structural building units of the gismondine framework is observed. In K-AlGe-GIS, this flattening occurs almost linear with pressure, whereas it is nonlinear in the GaSi-analogue due to structural changes of the water-cation assembly under hydrostatic pressures.

43 PARTICLE ACCELERATORS↗

Mid-infrared spectroscopic study of crystallization of cubic spinel phase from metakaolin

The structural changes during thermal conversion of metakaolinite into cubic spinel phase that was in literature considered as Al-Si spinel or {gamma}-Al{sub 2}O{sub 3} were investigated by mid-infrared spectroscopy (FT-IR) and differential scanning calorimetry (DSC) using medium ordered kaolin with high content of kaolinite. Spectrum features were studied in the mid-infrared region from 4000 to 400 cm{sup -1} as function of fractional conversion that resulted from DSC experiments. The increasing contends of Al-O bonds in the octahedral position (AlO{sub 6}) was observed during thermal transformation. The high ratio of antisymmetric stretching of {identical_to}Si-O-Al= and {identical_to}Si-O-Si{identical_to} bands and bands belonging to stretching of =Al-O bonds in the (AlO{sub 4}) tetrahedra and (AlO{sub 6}) octahedra decreases exponentially with fractional conversion. The antisymmetric stretching band of {identical_to}Si-O-Si{identical_to} bond in the (SiO{sub 4}) tetrahedra becomes more expressive due to formation of amorphous SiO{sub 2} phase. - Graphical abstract: The thermal conversion of metakaolinite into spinel phase was investigated by mid-infrared spectroscopy to found relationship between bands features and fractional convesrion. Highlights: > Formation of spinel phase from metakaolinite was studied by FT-IR. > Relationship between spectrum features and fractional conversion was investigated. > Intensity ratios of (AlO{sub 4}) and (AlO{sub 6}) decreases exponentially. > Antisymmetric stretching of (SiO{sub 4}) becomes more expressive during transformation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structures and self-activating photoluminescent properties of Sr{sub 3-x}A{sub x}GaO{sub 4}F (A=Ba, Ca) materials

The synthesis, structures and photoluminescent properties of mixed oxyfluorides of the type Sr{sub 3-x}A{sub x}GaO{sub 4}F are compared to Sr{sub 3-x}A{sub x}AlO{sub 4}F (A=Ca, Ba) materials. In these compounds the F{sup -} and O{sup 2-} ions are ordered and located on two distinct crystallographic sites. When substituting Sr{sup 2+} by Ba{sup 2+} and Ca{sup 2+}, we find in Sr{sub 3-x}A{sub x}GaO{sub 4}F materials an ordering of the alkaline earth cations over the two crystallographic sites. The amount of Ba{sup 2+} ions that can be substituted into Sr{sub 3-x}A{sub x}GaO{sub 4}F is x{<=}1.2, which is slightly more than can be incorporated into the previously reported Al-analog Sr{sub 3-x}A{sub x}AlO{sub 4}F (x=1.0). Conversely, the amount of Ca{sup 2+} ions that can be substituted into Sr{sub 3-x}Ca{sub x}GaO{sub 4}F (x=0.3) is significantly less than in Sr{sub 3-x}Ca{sub x}AlO{sub 4}F (x=1.0). A post-synthesis reduction step causes these materials to exhibit self-activating broad band photoluminescence where the emitted colors vary with the amount of ions substituted into the host lattice. - Graphical abstract: TOC Statement The structures of the self-activating phosphors Sr{sub 3-x}A{sub x}MO{sub 4}F (A=Ba, Ca and M=Al, Ga) can be rationalized as alternating layers of bond compression and elongation, which impact the photoluminescence. Highlights: Black-Right-Pointing-Pointer Comparison of the structural changes in Sr{sub 3-x}A{sub x}AlO{sub 4}F and Sr{sub 3-x}A{sub x}GaO{sub 4}F (A=Ba, Ca) and its influence on the photoluminescence of these self-activating phosphors. Black-Right-Pointing-Pointer Analysis of the Global Instability Index of the Sr{sub 3-x}A{sub x}AlO{sub 4}F and Sr{sub 3-x}A{sub x}GaO{sub 4}F (A=Ba, Ca). Black-Right-Pointing-Pointer Comparison of the photoluminescence between the self-activating phosphors Sr{sub 3-x}A{sub x}AlO{sub 4}F and Sr{sub 3-x}A{sub x}GaO{sub 4}F (A=Ba, Ca).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Preparation and thermal stability of the spindle α-Fe{sub 2}O{sub 3}@SiO{sub 2} core–shell nanoparticles

The spindle α-Fe{sub 2}O{sub 3}@SiO{sub 2} core–shell nanoparticles (NPs) are prepared via hydrothermal synthesis and modified Stöber method. During these processes, shell thicknesses could be easily adjusted by the amount of tetraethylorthosilicate (TEOS), and the formation of core-free SiO{sub 2} could be effectively avoided. The structures and compositions of α-Fe{sub 2}O{sub 3}@SiO{sub 2} NPs are investigated by transmission electron microscope (TEM), X-ray powder diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and ultraviolet–visible (UV–vis) absorption spectroscopy. These results reveal that the α-Fe{sub 2}O{sub 3}@SiO{sub 2} NPs with certain sizes are monodisperse and homogeneous. To estimate the thermal stability, the α-Fe{sub 2}O{sub 3}, α-Fe{sub 2}O{sub 3}@SiO{sub 2} and SiO{sub 2} NPs are annealed at 600, 800 and 1000 °C for 1 h under air atmosphere, respectively. Furthermore, the stabilities of these NPs are confirmed by thermal analysis methods. The structure and shape stabilities of these as-prepared α-Fe{sub 2}O{sub 3}@SiO{sub 2} NPs are investigated by XRD and scanning electron microscope (SEM). -- Graphical abstract: Schematic of preparation of the monodisperse spindle α-Fe{sub 2}O{sub 3}@SiO{sub 2} nanoparticles (NPs). Highlights: • The spindle α-Fe{sub 2}O{sub 3}@SiO{sub 2} nanoparticles (NPs) are successfully prepared by hydrothermal synthesis and modified Stöber method. • Optical properties are estimated and calculated by UV vis absorption spectrum. • Thermal stability of the α-Fe{sub 2}O{sub 3}, α-Fe{sub 2}O{sub 3}@SiO{sub 2} and SiO{sub 2} NPs are compared and analyzed by the SEM technique. • The structural changes of α-Fe{sub 2}O{sub 3}@SiO{sub 2} NPs are measured by XRD measurement.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Phase transformations and selective growth in YMnO{sub 3} films

An irreversible phase transformation from amorphous to crystalline orthorhombic YMnO{sub 3} (o-YMO) phase takes place in Y–Mn–O films deposited by pulsed-injection metal organic chemical vapor deposition (MOCVD) on Si(100) substrate. This phase transformation was studied through ex-situ and in-situ thermal annealings and the corresponding structural changes were analyzed by X-ray diffraction, scanning electron microscopy, transmission electron microscopy and Raman spectroscopy. It was shown that it takes place at an almost constant temperature (∼700 °C) and in a short period of time (∼min) and that the o-YMO phase thus obtained is stable at least up to 900 °C. We also demonstrate that the selective growth of amorphous, orthorhombic or hexagonal films is made possible by adapting the MOCVD temperature according to the temperature stability region of the different phases. - Graphical abstract: Temperature-dependent Raman spectra of an amorphous as-deposited Y–Mn–O film in the temperature range RT – 900 °C. The red spectrum marks the crystallization of the amorphous phase into the o-YMnO{sub 3} phase. - Highlights: • Phase transformations and selective growth in YMnO{sub 3}/Si(100) MOCVD films are studied. • Transformation from amorphous to crystalline orthorhombic YMnO{sub 3} occurs. • It takes place at an almost constant temperature (∼700 °C). • The orthorhombic YMnO{sub 3} phase thus obtained is stable at least up to 900 °C. • A selective growth is made possible by adapting the MOCVD temperature.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Phase transformations during HLnTiO{sub 4} (Ln=La, Nd) thermolysis and photocatalytic activity of obtained compounds

Layered HLnTiO{sub 4} (Ln=La, Nd) compounds belonging to Ruddlesden–Popper phases were found to form partially hydrated compounds Ln{sub 2}Ti{sub 2}O{sub 7}·xH{sub 2}O during thermal dehydration as well as defect oxides Ln{sub 2}□Ti{sub 2}O{sub 7} as final products. Further heating of metastable defect Ln{sub 2}□Ti{sub 2}O{sub 7} substances leads to the formation of pyrochlore-type oxides Ln{sub 2}Ti{sub 2}O{sub 7} {sub (p)}, with subsequent transformation under higher temperatures to stable layered 110-type perovskites Ln{sub 2}Ti{sub 2}O{sub 7}. The occurring structure transformations lead to an increase of photocatalytic activity in the order of HLnTiO{sub 4}<Ln{sub 2}Ti{sub 2}O{sub 7}·yH{sub 2}O<Ln{sub 2}□Ti{sub 2}O{sub 7}<Ln{sub 2}Ti{sub 2}O{sub 7} {sub (p)}<Ln{sub 2}Ti{sub 2}O{sub 7} in the reaction of hydrogen evolution from aqueous isopropanol solution. - Graphical abstract: Layered HLnTiO{sub 4} (Ln=La, Nd) compounds form partially hydrated Ln{sub 2}Ti{sub 2}O{sub 7}·xH{sub 2}O compounds during thermal dehydration, further heating results to the formation to defect oxides Ln{sub 2}□Ti{sub 2}O{sub 7}, pyrochlor-type oxides Ln{sub 2}Ti{sub 2}O{sub 7} {sub (p)}, with subsequent transformation to layered 110-type perovskites Ln{sub 2}Ti{sub 2}O{sub 7}. Structure transformations lead to an increase of photocatalytic activity in the order of HLnTiO{sub 4}<Ln{sub 2}Ti{sub 2}O{sub 7}·yH{sub 2}O<Ln{sub 2}□Ti{sub 2}O{sub 7}<Ln{sub 2}Ti{sub 2}O{sub 7} {sub (p)}<Ln{sub 2}Ti{sub 2}O{sub 7}. - Highlights: • We studied dehydration and further thermolysis of HLnTiO{sub 4} (Ln=La, Nd) compounds. • XRD, STA and solid state IR studies were carried out. • A new series of metastable Ln{sub 2}Ti{sub 2}O{sub 7}·yH{sub 2}O compounds was obtained. • We examined the photocatalytic activity of all obtained compounds. The hydrogen evolution rate increased in the course of the structure changes during thermolysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Probing the limit of magnesium uptake by β-tricalcium phosphate in biphasic mixtures formed from calcium deficient apatites

A series of magnesium doped non-stoichiometric calcium deficient apatites were synthesized through an aqueous precipitation route. The resultant structural changes during heat treatment were investigated by X-ray diffraction, Raman and FT-IR spectroscopy and Rietveld refinement. The results confirmed the formation of biphasic mixtures comprising Ca{sub 10}(PO{sub 4}){sub 6}(OH){sub 2} and β-Ca{sub 3}(PO{sub 4}){sub 2} after heat treatment at 1000 °C with the preferential occupancy of Mg{sup 2+} at the crystal lattice of β-Ca{sub 3}(PO{sub 4}){sub 2}. The concentration of Mg{sup 2+} uptake in β-Ca{sub 3}(PO{sub 4}){sub 2} is limited till reaching the stoichiometric ratio of (Ca+Mg)/P=1.67 and beyond this stoichiometric value [(Ca+Mg)/P>1.67], Mg{sup 2+} precipitates as Mg(OH){sub 2} and thereafter gets converted to MgO during heat treatment. Any kind of Mg{sup 2+} uptake in the crystal lattice of Ca{sub 10}(PO{sub 4}){sub 6}(OH){sub 2} is discarded from the investigation. - Highlights: • Aqueous co-precipitation of calcium deficient apatites with excess magnesium (Mg{sup 2+}) additions. • Heat treatments beyond 800 °C results in the formation of biphasic apatite mixtures. • Mg{sup 2+} gets accommodated at the β-Ca{sub 3}(PO{sub 4}){sub 2} lattice of biphasic mixtures. • Mg{sup 2+} additions exceeding stoichiometric value (Ca/P>1.67) results in its formation as MgO. • Mg{sup 2+} occupancy at β-Ca{sub 3}(PO{sub 4}){sub 2} lattice delays its allotropic conversion α-Ca{sub 3}(PO{sub 4}){sub 2} till 1350 °C.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

External anion effect on the synthesis of new MOFs based on formate and a twisted divergent ligands

New copper(II) metal–organic compounds with the formulae [Cu{sub 3}Cl(HCO{sub 2}){sub 5}(SCS){sub 3}(H{sub 2}O){sub 2}]·8H{sub 2}O·EtOH (1) and [Cu{sub 3}(HCO{sub 2}){sub 4}(SCS){sub 4}(H{sub 2}O){sub 2}](NO{sub 3}){sub 2}·9H{sub 2}O (2) (SCS=bis(4-pyridylthio)methane) have been synthesized after a careful study of the reaction of the SCS ligand with copper(II) formate. The compounds were obtained in the presence of sodium chloride and nitrate salts under microwave irradiation. The influence of the anion at different metal/anion ratios on the final architecture has been studied. The new chloride-MOF 1 has been characterized by electron paramagnetic resonance (EPR), magnetic properties and single crystal X-ray diffraction studies. The thermal stability and topological analysis have also been investigated. - Highlights: • Microwave synthesis of coordination polymers. • Anion-derived structural changes. • Influence of anions at different metal/anion ratios on the final architectures. • EPR and magnetic characterization of a MOF compound.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The structural response of gadolinium phosphate to pressure

Accurate elastic constants for gadolinium phosphate (GdPO{sub 4}) have been measured by single-crystal high-pressure diffraction methods. The bulk modulus of GdPO{sub 4} determined under hydrostatic conditions, 128.1(8) GPa (K′=5.8(2)), is markedly different from that obtained with GdPO{sub 4} under non-hydrostatic conditions (160(2) GPa), which indicates the importance of shear stresses on the elastic response of this phosphate. High pressure Raman and diffraction analysis indicate that the PO{sub 4} tetrahedra behave as rigid units in response to pressure and that contraction of the GdPO{sub 4} structure is facilitated by bending/twisting of the Gd–O–P links that result in increased distortion in the GdO{sub 9} polyhedra. - Graphical abstract: A high-pressure single crystal diffraction study of GdPO{sub 4} with the monazite structure is presented. The elastic behaviour of rare-earth phosphates are believed to be sensitive to shear forces. The bulk modulus of GdPO{sub 4} measured under hydrostatic conditions is 128.1(8) GPa. Compression of the structure is facilitated by bending/twisting of the Gd−O−P links that result in increased distortion in the GdO{sub 9} polyhedra. Display Omitted - Highlights: • The elastic responses of rare-earth phosphates are sensitive to shear forces. • The bulk modulus of GdPO{sub 4} measured under hydrostatic conditions is 128.1(8) GPa. • Twisting of the inter-polyhedral links allows compression of the GdPO{sub 4} structure. • Changes to the GdO{sub 9} polyhedra occur in response to pressure (<7.0 GPa).

36 MATERIALS SCIENCE↗

Structure evolution upon chemical and physical pressure in (Sr{sub 1−x}Ba{sub x}){sub 2}FeSbO{sub 6}

Here we demonstrate the gradual structural transformation from the monoclinic I2/m to tetragonal I4/m, cubic Fm-3m and hexagonal P6{sub 3}/mmc structure upon the isovalent larger-for-smaller A-site cation substitution in the B-site ordered double-perovskite system (Sr{sub 1−x}Ba{sub x}){sub 2}FeSbO{sub 6}. This is the same transformation sequence previously observed up to Fm-3m upon heating the parent Sr{sub 2}FeSbO{sub 6} phase to high temperatures. High-pressure treatment, on the other hand, transforms the hexagonal P6{sub 3}/mmc structure of the other end member Ba{sub 2}FeSbO{sub 6} back to the cubic Fm-3m structure. Hence we may conclude that chemical pressure, physical pressure and decreasing temperature all work towards the same direction in the (Sr{sub 1−x}Ba{sub x}){sub 2}FeSbO{sub 6} system. Also shown is that with increasing Ba-for-Sr substitution level, i.e. with decreasing chemical pressure effect, the degree-of-order among the B-site cations, Fe and Sb, decreases. - Graphical abstract: In the (Sr{sub 1−x}Ba{sub x}){sub 2}FeSbO{sub 6} double-perovskite system the gradual structural transformation from the monoclinic I2/m to tetragonal I4/m, cubic Fm-3m and hexagonal P6{sub 3}/mmc structure is seen upon the isovalent larger-for-smaller A-site cation substitution. High-pressure treatment under 4 GPa extends stability of the cubic Fm-3m structure within a wider substitution range of x. - Highlights: • Gradual structural transitions upon A-cation substitution in (Sr{sub 1−x}Ba{sub x}){sub 2}FeSbO{sub 6.} • With increasing x structure changes from I2/m to I4/m, Fm-3m and P6{sub 3}/mmc. • Degree of B-site order decreases with increasing x and A-site cation radius. • High-pressure treatment extends cubic Fm-3m phase stability for wider x range. • High-pressure treatment affects bond lengths mostly around the A-cation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of neodymium doping on structure, electrical and optical properties of nanocrystalline ZnO

In this paper, we report effect of Nd doping on structure, electrical and optical properties of nanocrystalline ZnO prepared through a modified ceramic route. The X-ray diffraction and transmission electron microscopy studies reveal that annealed samples are single phase, pure nanocrystalline ZnO. The optical band gap for different compositions, estimated from ultraviolet-visible spectroscopy study, shows a little increasing tendency while doped with Nd for the samples annealed at lower temperature. The dc electrical conductivity of the samples decreases with the increase in Nd concentration. The ac electrical measurements prove the hopping conduction as the dominant mechanism. The results are being explained on the basis of band structural change due to Nd doping in the host lattice and by Correlated Barrier Hopping model. - Highlights: Black-Right-Pointing-Pointer Particle size increases when it is doped (from XRD). Black-Right-Pointing-Pointer XRD peak shifted to lower angle when doped. Black-Right-Pointing-Pointer The dc conductivity decreases with the increase of Nd dopant concentrations. Black-Right-Pointing-Pointer The temperature dependent ac conductivity follows the universal power law.

36 MATERIALS SCIENCE↗

Structural characteristics and elevated temperature mechanical properties of AJ62 Mg alloy

Structure and mechanical properties of the novel casting AJ62 (Mg–6Al–2Sr) alloy developed for elevated temperature applications were studied. The AJ62 alloy was compared to commercial casting AZ91 (Mg–9Al–1Zn) and WE43 (Mg–4Y–3RE) alloys. The structure was examined by scanning electron microscopy, x-ray diffraction and energy dispersive spectrometry. Mechanical properties were characterized by Viskers hardness measurements in the as-cast state and after a long-term heat treatment at 250 °C/150 hours. Compressive mechanical tests were also carried out both at room and elevated temperatures. Compressive creep tests were conducted at a temperature of 250 °C and compressive stresses of 60, 100 and 140 MPa. The structure of the AJ62 alloy consisted of primary α-Mg dendrites and interdendritic nework of the Al{sub 4}Sr and massive Al{sub 3}Mg{sub 13}Sr phases. By increasing the cooling rate during solidification from 10 and 120 K/s the average dendrite arm thickness decreased from 18 to 5 μm and the total volume fraction of the interdendritic phases from 20% to 30%. Both factors slightly increased hardness and compressive strength. The room temperature compressive strength and hardness of the alloy solidified at 30 K/s were 298 MPa and 50 HV 5, i.e. similar to those of the as-cast WE43 alloy and lower than those of the AZ91 alloy. At 250 °C the compressive strength of the AJ62 alloy decreased by 50 MPa, whereas those of the AZ91 and WE43 alloys by 100 and 20 MPa, respectively. The creep rate of the AJ62 alloy was higher than that of the WE43 alloy, but significantly lower in comparison with the AZ91 alloy. Different thermal stabilities of the alloys were discussed and related to structural changes during elevated temperature expositions. - Highlights: • Small effect of cooling rate on the compressive strength and hardness of AJ 62 • A bit lower compressive strength of AJ 62 compared to AZ91 at room temperature • Higher resistance of the AJ 62 alloy to the creep process in compression compared to AZ91 • Excellent thermal stability and creep resistance of the alloy WE 43 • Improved thermal stability and creep resistance in order WE43 > AJ62 >> AZ91.

36 MATERIALS SCIENCE↗

Dual-phase glassy/nanoscale icosahedral phase materials in Cu–Zr–Ti–Pd system alloys

The present work is devoted to an investigation of the formation kinetics, stability and homogeneity area of the nanoscale icosahedral phase formed on heating in the dual-phase glassy/quasicrystalline phase Cu–Zr–Ti–Pd alloys. The data obtained indicate that the Cu–Zr–Ti–Pd icosahedral phase is not a Cu-rich part of the compositional homogeneity area of the Zr–Cu–Pd one. Moreover, Ti, as well as Pd, is found to be an important element stabilizing quasicrystalline phase in the Cu–Zr–Ti–Pd alloys. The formation criteria for Cu- and Zr/Hf-based icosahedral phases are discussed based on the quasilattice constant to average atomic diameter ratio. Deviation from a certain ratio leads to destabilization of the icosahedral phase. By using the isothermal calorimetry traces transformation kinetics above and below the glass-transition region was analyzed. Some difference in the transformation kinetics above and below the glass-transition region allows us to suggest that possible structure changes occur upon glass-transition. - Highlights: • Formation kinetics, stability and homogeneity area of nanoscale icosahedral phase • Cu–Zr–Ti–Pd icosahedral phase is not a Cu-rich part of Zr–Cu–Pd one. • Ti, as well as Pd, is an important element stabilizing quasicrystalline phase. • Difference in transformation kinetics above and below glass-transition region.

36 MATERIALS SCIENCE↗

Annealing effects on the structural and magnetic properties of off-stoichiometric Fe-Mn-Ga ferromagnetic shape memory alloys

Annealing plays an important role in modifying structures and properties of ferromagnetic shape memory alloys (FSMAs). The annealing effect on the structures and magnetic properties of off-stoichiometric Fe 45 Mn 26 Ga 29 FSMA has been investigated at different elevated temperatures. Rietveld refinements of neutron diffraction patterns display that the formation of the γ phase in Fe 45 Mn 26 Ga 29 annealed at 1073 K increases the martensitic transformation temperature and reduces the thermal hysteresis in comparison to the homogenized sample. The phase segregation of a Fe-rich cubic phase and a Ga-rich cubic phase occurs at the annealing temperature of 773 K. The atomic occupancies of the alloys are determined thanks to the neutron's capability of differentiating transition metals. The annealing effects at different temperatures introduce a different magnetic characteristic that is associated with distinctive structural changes in the crystal.

36 MATERIALS SCIENCE↗