Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,783 records · Page 99
All sourcesNASA NTRSDOE OSTI
DOE OSTI2015

Frequency splitter based on the directional emission from surface modes in dielectric photonic crystal structures

We demonstrate the numerical design and the experimental validation of frequency dependent directional emission from a dielectric photonic crystal structure. The wave propagates through a photonic crystal line-defect waveguide, while a surface layer at the termination of the photonic crystal enables the excitation of surface modes and a subsequent grating layer transforms the surface energy into outgoing propagating waves of the form of a directional beam. Furthermore, the angle of the beam is controlled by the frequency and the structure operates as a frequency splitter in the intermediate and far field region.

42 ENGINEERING↗
DOE OSTI2016

Electrodeposition of Fe{sub 2}O{sub 3} nanoparticles and its supercapacitive properties

Fe{sub 2}O{sub 3} metal oxide nanoparticles are synthesized by electrodeposition method on stainless steel substrate. The crystal structure and surface morphological studies of the obtained metal oxide thin film are carried out by using X-ray diffraction (XRD) technique and Scanning Electron Microscopy (SEM) respectively. The electrochemical properties of Fe{sub 2}O{sub 3} thin film like Cyclic Voltammetry (CV), Galvonostatic Charge-Discharge (GCD) and Electrochemical Impedance Spectroscopy (EIS) are studied in a bath of 0.5 M Na{sub 2}SO{sub 4} as electrolyte. The observed specific capacitance shows improved values 135 Fg{sup −1} at 5 mVs{sup −1} scan rate. The electrochemical stability of Fe{sub 2}O{sub 3} electrode is investigated using cyclic voltammetry for 1000 cycles at a scan rate 50 mVs{sup −1}. The Fe{sub 2}O{sub 3} electrode exhibits superior cycling stability with only 4-5% capacitance loss after one thousand cycles. The values of specific power and specific energy of Fe{sub 2}O{sub 3} electrode obtained from Galvonostatic charge discharge studies are 2250 W.kg{sup −1} and 63.15 Wh.kg{sup −1} respectively at current density 1 A/g. From all the electrochemical properties of Fe{sub 2}O{sub 3} electrode, it indicates that it will be promising electrode material for supercapacitor application.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Water-Oil Displacement in Shale: New Insights from a Comparative Study Integrating Imbibition Tests and Multiscale Imaging

Water-oil displacement is an important process that occurs in a shale matrix after hydraulic fracturing and in water-based enhanced oil recovery. Current understanding of this displacement process is limited because of the complicated pore structure and surface properties in shale. In this work, this process and its controlling factors are investigated through a comparative study of three shale samples that have different types of pore systems and wettability. Here, an integrated method of imbibition and multiscale imaging was applied, and a modified oleic tracer that can better represent oil flow was used in imbibition testing and micro-computed tomography (CT) imaging. Scanning electron microscope (SEM) pore characterization was then performed under high magnification with guidance from the micro-CT images showing the changes caused by oil or water imbibition. New insights were obtained on the importance of both wettability and pore size effect on oil recovery and the distribution of residual oil after water-oil displacement. Connectivity of pores with different wettability is also discussed based on 3D analysis and SEM pore characterization. Collectively, these new findings improve the understanding of the complicated process of water-oil displacement and the role of influencing factors. Important implications for improved oil recovery strategy in shale are discussed for different types of reservoir rocks. The integrated imaging and imbibition technique provides a new path for further investigation of improved oil recovery in shale.

04 OIL SHALES AND TAR SANDS↗
DOE OSTI2025

Reorganization of Water at Aqueous Aluminum Chloride (AlCl 3 ) Interfaces: Vibrational Sum Frequency Generation and Molecular Dynamics Simulations

AlCl 3 hydration states and complexation are not well understood both in solutions and at the air–aqueous interface despite their potential significance in natural waters and their industrial and energy-related applications. Here, we investigated Al 3+ and Cl – ion behaviors in an AlCl 3 aqueous bulk solution and at the air–aqueous interface using interface-selective vibrational sum frequency generation (SFG), Raman and infrared spectroscopies, molecular dynamics (MD) simulation, as well as molecular-informed reduced modeling. Our reduced modeling reveals relatively long-range effects for Al 3+ as compared to monovalent ions such as Na + indicating that the interfacial depth of trivalent ions can be significantly larger than that of monovalent ions at the air–water interface. MD simulations reveal interfacial stratification and multiple layering of the ions. Compression of the Al 3+ and Cl – distributions with increasing concentrations from 0.5 to 2.5 m is also observed in the subsurface regions. Significant SSP- and PPP-polarized SFG OH spectral intensity increases are observed from 0.5 to 1.5 m and 0.5 to 2.5 m, respectively, indicative of interfacial depth increases and a change in average orientation above 1.5 m. Extensive evaluation of SFG spectra, Fresnel-corrected using several approaches, shows the same trends. The nonmonotonic trend points to a changing structure in surface and subsurface water orientation and hydrogen bonding environment generally consistent with the MD simulation of stratification and water orientation changes. Furthermore, solvent-shared ion pairing is implicated with MD simulation radial distribution analysis and consistent with infrared spectral identification of the hexaaqua aluminum ion in the solution phase. Spectral evidence of a strong Al 3+ hydration shell and the acidic behavior of the Al 3+ ions is obvious in the Raman and infrared spectra of the bulk solution. In conclusion, we show that the MD dipole potential is directly related to the MD second-order susceptibility of the interface, χ SFG–MD (2) , both of which correlate up to ∼35 Å with the spectral observations of increasing and then saturating intensities, suggesting that both ion stratification and interfacial depth determine the water orientations at an air–water interface of 1-3 electrolyte solutions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2015

Structure of Tiopronin-Protected Silver Nanoclusters in a One-Dimensional Assembly

The preparation and characterization of all-thiol-protected noble-metal nanoclusters represent significant advancements in the field of nanomaterials. One of the emerging trends in the study of silver nanoclusters in particular, is the generation of sulfide-type silver at their surfaces as a result of surface protection by thiols. Here, X-ray absorption spectroscopy (XAS) was used to identify the structure and composition of 2 nm tiopronin-protected silver nanoclusters arranged in one-dimensional chains. Silver K-edge XAS multipath refinements and wavelet-transformed XAS analysis found that the nanoclusters comprised small metal cores surrounded by thick sulfide-type shells. Lastly, this further demonstrates that the sulfide-type shell is a prevalent surface structure throughout silver nanoclusters protected by thiols. In addition, the antibacterial activities of the nanoclusters were also examined; they were found to be active against both Gram-positive and Gram-negative bacteria, thereby shedding light on the effects of both the surface structure and the special arrangement of the nanoclusters.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2013

Mineral Association Changes the Secondary Structure and Dynamics of Murine Amelogenin

Biomineralization proteins, present during the formation of hard tissues including bones, teeth, egg shells and nacre, result in the exquisite structures and properties of the resulting materials.[1] The structure of these proteins is often implicated in the control of the mineral properties, however very little structural data is available for the bulk of these proteins due to the difficulty in determining structures of immobilized proteins. Solid-state NMR is uniquely suited to the study of the structure of proteins bound to surfaces, demonstrated with the structural and orientation insights provided for the hydroxyapatite mineralization proteins statherin and the amelogenin, LRAP.[2] While these data are some of the only structural data available for this important class of protein, the experiments are often expensive and time consuming, due to the need to prepare and measure samples with isolated spin pairs, and are limited to a size of ~60 residues. In this work, we utilized a combination of 1D and recent 2D[3] solid-state NMR techniques along with a sparsely labelled sample to characterize the structure and dynamics of potential HAP binding residues of the 180 residue enamel protein, amelogenin. Amelogenin nanospheres and mineral bound amelogenin were investigated and a shift from unstructured to β-sheet structure was observed, along with a decrease in protein flexibility. This work provides the first molecular level structure and dynamic information of full-length amelogenin on the surface of hydroxyapatite (HAP) and within nanospheres, and demonstrates the ability to evaluate structural characteristics of large biomineralization proteins bound to their physiologically relevant surface. The research was performed at the Pacific Northwest National Laboratory (PNNL), a facility operated by Battelle for the U.S. Department of Energy, with a portion of it performed at the W.R. Wiley Environmental Molecular Sciences Laboratory (EMSL), a national scientific user facility sponsored by the U.S. DOE Biological and Environmental Research program.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Demarcating the Impact of Electrolytes on High–Nickel Cathodes and Lithium–Metal Anode

The ever-growing demand for low-cost, high-energy-density lithium-ion batteries (LIBs) makes high-nickel layered oxide cathodes, especially LiNiO 2 (LNO), one of the most appealing candidates. However, poor structural and surface instability that leads to a short cycle life remains a formidable challenge. Herein, a systematic investigation of LNO performance in two different electrolytes (a conventional carbonate-based LP57 electrolyte and an ether-based localized high-concentration electrolyte (LHCE)) with different charge cut-off voltages is presented. These findings show that the cathode-electrolyte reactivity is the main factor dictating the performance degradation of LNO at high voltages rather than bulk integrity. While LHCE can provide good stability beyond 4.2 V with a robust, uniform solid–electrolyte interphase (SEI) layer on the Li-metal anode, there is no significant difference in cyclability at 4.15 V (96% capacity retention after 200 cycles) for both LP57 and LHCE. From LNO symmetric cells, carbonate-based electrolyte is found to be good for LNO stability while ether-based electrolyte is beneficial toward Li-metal anode. Furthermore, a suitable electrolyte or a low cut-off voltage is necessary to maintain a decent cycle life. Altogether, this work highlights the impact of electrolyte and cut-off voltage on LNO and Li-metal, which can help guide the development of cells based on LNO.

25 ENERGY STORAGE↗
DOE OSTI2024

Engineering Ultrathin Alloy Shell in Au@AuPd Core-Shell Nanoparticles for Efficient Plasmon-Driven Photocatalysis

Bimetallic core-shell nanoparticles (NPs) possessing a synergetic coupling of plasmonic and catalytic metals have emerged as promising prototypes for efficient plasmon-driven photocatalysis. Here, Au@AuPd core-shell NPs composed of Au core NP and ultrathin AuPd shell are introduced to acquire improved light utilization efficiency in photocatalytic selective oxidation. With systematical control of the composition of the ultrathin alloy shell, it reveals that the Au@AuPd core-shell NPs with 10 at% Pd (in the single-atom alloy regime) is an effective nanostructure capable of maximizing the quantum yield of plasmon-induced light absorption and optimizing the surface electronic structure for catalytic reactions. This controlled system provides new insights into shell engineering for enhancing photocatalytic performance via the regulation of energy funneling processes in core-shell nanocatalysts.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Transfer of Millimeter‐Scale Strained Multiferroic Epitaxial Thin Films on Rigid Substrates via an Epoxy Method Producing Magnetic Property Enhancement

The demonstration of epitaxial thin film transfer has enormous potential for thin film devices free from the traditional substrate epitaxy limitations. However, large-area continuous film transfer remains a challenge for the commonly reported polymer-based transfer methods due to bending and cracking during transfer, especially for highly strained epitaxial thin films. In this work, a new epoxy-based, rigid transfer method is used to transfer films from an SrTiO 3 (STO) growth substrate onto various new substrates, including those that will typically pose significant problems for epitaxy. An epitaxial multiferroic Bi 3 Fe 2 Mn 2 O x (BFMO) layered supercell (LSC) material is selected as the thin film for this demonstration. The results of surface and structure studies show an order of magnitude increase in the continuous area of transferred films when compared to previous transfer methods. The magnetic properties of the BFMO LSC films are shown to be enhanced by the release of strain in this method, and ferromagnetic resonance is found with an exceptionally low Gilbert damping coefficient. The large-area transfer of this highly strained complex oxide BFMO thin film presents enormous potential for the integration of many other multifunctional oxides onto new substrates for future magnetic sensors and memory devices.

bismuth oxides↗
DOE OSTI2023

Nanocone-Modified Surface Facilitates Gas Bubble Detachment for High-Rate Alkaline Water Splitting

The significant amount of gas bubbles generated during high-rate alkaline water splitting (AWS) can be detrimental to the process. The accumulation of bubbles will block the active catalytic sites and hinder the ion and electrolyte diffusion, limiting the maximum current density. Furthermore, the detachment of large bubbles can also damage the electrode's surface layer. Here, a general strategy for facilitating bubble detachment is demonstrated by modifying the nickel electrode surface with nickel nanocone nanostructures, which turns the surface into underwater superaerophobic. Simulation and experimental data show that bubbles take a considerably shorter time to detach from the nanocone-modified nickel foil than the unmodified foil. As a result, these bubbles also have a smaller detachment size and less chance for bubble coalescence. The nanocone-modified electrodes, including nickel foil, nickel foam, and 3D-printed nickel lattice, all show substantially reduced overpotentials at 1000 mA cm -2 compared to their pristine counterpart. The electrolyzer assembled with two nanocone-modified nickel lattice electrodes retains >95% of the performance after testing at ≈900 mA cm -2 for 100 h. In conclusion, the surface NC structure is also well preserved. The findings offer an exciting and simple strategy for enhancing the bubble detachment and, thus, the electrode activity for high-rate AWS.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗
DOE OSTI2021

Characterization of a Molecule Partially Confined at the Pore Mouth of a Zeotype

Abstract We investigate the interaction between a molecule and a pore mouth—a critical step in adsorption processes—by characterizing the conformation of a macrocyclic calix[4]arene‐Ti IV complex, which is grafted on the external surface of a zeotype (*‐SVY). X‐ray absorption and 13 C{ 1 H} CPMAS NMR spectroscopies independently detect a unique conformation of this complex when it is grafted at crystallographically equivalent locations that lie at the interface of 7 Å hemispherical microporous cavities and the external surface. Electronic structure calculations support the presence of this unique conformation, and suggest that it is brought about by a specific orientation of the macrocycle that maximizes non‐covalent interactions between calix[4]arene upper‐rim tert ‐butyl substituents and the microporous‐cavity walls. Our comparative study provides a rare “snapshot” of a molecule partially confined at a pore mouth, an essential intermediate for adsorption into micropores, and demonstrates how surrounding environment controls this confinement in a sensitive fashion.

Grosso‐Giordano, Nicolás A.↗
DOE OSTI2022

Superior Metal‐Organic Framework Activation with Dimethyl Ether

Abstract Metal–organic frameworks (MOFs) are demonstrated to be readily activated by treatment with the low surface tension, low boiling point solvent dimethyl ether (DME). The mildness of the method enables access to high surface areas by avoiding structural changes in the framework that often plague thermal activation methods. A distinction from previous methods is that DME activation succeeds for materials with coordinatively unsaturated sites (CUS) and non‐CUS MOFs as well. DME displaces solvent molecules occupying the pores of the MOF as well as those coordinated to metal centers; reducing evacuation temperature by using a coordinating, yet highly volatile guest enables low temperature activation with structural retention as demonstrated surface area measurements that match or exceed existing activation protocols.

Wright, Keenan R.↗
DOE OSTI2023

Thermal Stability and Outgassing Behaviors of High‐nickel Cathodes in Lithium‐ion Batteries

Abstract LiNiO 2 ‐based high‐nickel layered oxide cathodes are regarded as promising cathode materials for high‐energy‐density automotive lithium batteries. Most of the attention thus far has been paid towards addressing their surface and structural instability issues brought by the increase of Ni content (>90 %) with an aim to enhance the cycle stability. However, the poor safety performance remains an intractable problem for their commercialization in the market, yet it has not received appropriate attention. In this review, we focus on the gas generation and thermal degradation behaviors of high‐Ni cathodes, which are critical factors in determining their overall safety performance. A comprehensive overview of the mechanisms of outgassing and thermal runaway reactions is presented and analyzed from a chemistry perspective. Finally, we discuss the challenges and the insights into developing robust, safe high‐Ni cathodes.

Cui, Zehao↗
DOE OSTI2016

Atomic-scale determination of active facets on the MoVTeNb oxide M1 phase and their intrinsic catalytic activity for ethane oxidative dehydrogenation

Atomic resolution aberration-corrected HAADF-STEM imaging has been used to directly image the basal (001) plane of the catalytically relevant M1 phase in MoVTeNb complex oxides. Facets {010}, {120} and {210} are identified as the most stable lateral terminations of the crystals. For each of these surface facets the average concentration of active sites is determined directly from the images. The most stable {010} facet does not expose active sites and is therefore regarded to be inactive. As a consequence, large flattened M1 particles are concluded to have a lower activity than other morphologies. This hypothesis is validated by a statistical analysis of two samples with rod vs. plate morphology. The concentration of sites and the catalytic activity in ethane oxidative dehydrogenation correlate perfectly, demonstrating quantitatively that the differences in reactivity between MoVTeNbOx catalysts of equal crystallinity and chemical composition depend primarily on the terminating facets that constitute the elongated catalyst particles.

MoVTeNbO, Oxidative Dehydrogenation, M1 phase, STE↗
DOE OSTI2020

Enhancing Oxygen Reduction Activity of Pt-based Electrocatalysts: From Theoretical Mechanisms to Practical Methods

Pt-based electrocatalysts are considered as one of the most promising choices to facilitate the oxygen reduction reaction (ORR), and the key factor enabling their success is to reduce the required amount of platinum. Herein, we focus on illuminating both the theoretical mechanisms which enable enhanced and sustained ORR activity and the practical methods to achieve them in catalysts. The various multi-step pathways of ORR are firstly reviewed and the rate-determining steps based on the reaction intermediates and their binding energies are analyzed. We then explain the critical aspects of Pt-based electrocatalysts to tune oxygen reduction properties from the viewpoints of active sites exposure and altering the surface electronic structure, and further summarize representative research progress towards practically achieving these activity enhancements with a focus on platinum size reduction, shape control and core Pt elimination methods. Finally, we outline the remaining challenges and provide our perspectives with regard to further enhancing their activities.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Thermal Stability and Outgassing Behaviors of High–nickel Cathodes in Lithium–ion Batteries

LiNiO 2 -based high-nickel layered oxide cathodes are regarded as promising cathode materials for high-energy-density automotive lithium batteries. Most of the attention thus far has been paid towards addressing their surface and structural instability issues brought by the increase of Ni content (>90 %) with an aim to enhance the cycle stability. However, the poor safety performance remains an intractable problem for their commercialization in the market, yet it has not received appropriate attention. In this review, we focus on the gas generation and thermal degradation behaviors of high-Ni cathodes, which are critical factors in determining their overall safety performance. Furthermore, a comprehensive overview of the mechanisms of outgassing and thermal runaway reactions is presented and analyzed from a chemistry perspective. Finally, we discuss the challenges and the insights into developing robust, safe high-Ni cathodes.

25 ENERGY STORAGE↗