SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The Single Event Effect (SEE) responses of two FireWire serial buses based on the IEEE 1394 standard were tested with heavy ions and protons. A unique approach to testing and categorizing the SEEs is presented.
Explore the source record for details and available documents.
Among other challenges from NASA's X2000 Technology Development Program, affordability and miniaturizaton are prominent criteria, which 1) preclude the traditional solutions for mission reliability that rely on customer-built hardware and extensive component/subsystem replication, and 2) call for commercial-of-the-shelf (COTS) based approaches incorporating novel, practical fault tolerance techniques.
This innovation is designed to prevent a single end system communication node from negatively influencing the whole system s behavior so that the network system can still operate if an end node is faulty. Placing a hub (star) in the middle of the system prevents propagation of critical control information that other end systems would react to, like block reset messages.
The high-performance, scalability and miniaturization requirements together with the power, mass and cost constraints mandate the use of commercial-off-the-shelf (COTS) components and standards in the X2000 avionics system architecture for deep-space missions. In this paper, we report our experiences and findings on the design of an IEEE 1394 compliant fault-tolerant COTS-based bus architecture. While the COTS standard IEEE 1394 adequately supports power management, high performance and scalability, its topological criteria impose restrictions on fault tolerance realization. To circumvent the difficulties, we derive a "stack-tree" topology that not only complies with the IEEE 1394 standard but also facilitates fault tolerance realization in a spaceborne system with limited dedicated resource redundancies. Moreover, by exploiting pertinent standard features of the 1394 interface which are not purposely designed for fault tolerance, we devise a comprehensive set of fault detection mechanisms to support the fault-tolerant bus architecture.
In this paper, we report our experiences and findings on the design of a fault-tolerant bus architecture comprised of two COTS buses, the IEEE 1394 and the 12C. This fault-tolerant bus is the backbone system bus for the avionics architecture of the X2000 program at the Jet Propulsion Laboratory. COTS buses are attractive because of the availability of low cost commercial products. However, they are not specifically designed for highly reliable applications such as long-life deep-space missions. The X2000 design team has devised a multi-level fault tolerance approach to compensate for this shortcoming of COTS buses. First, the approach enhances the fault tolerance capabilities of the IEEE 1394 and 12 C buses by adding a layer of fault handling hardware and software. Second, algorithms are developed to enable the IEEE 1394 and the 12 C buses assist each other to isolate and recovery from faults. Third, the set of IEEE 1394 and 12 C buses is duplicated to further enhance system reliability. The X2000 design team has paid special attention to guarantee that all fault tolerance provisions will not cause the bus design to deviate from the commercial standard specifications. Otherwise, the economic attractiveness of using COTS will be diminished. The hardware and software design of the X2000 fault-tolerant bus are being implemented and flight hardware will be delivered to the ST4 and Europa Orbiter missions.
A multiplexer/demultiplexer system has been developed to enable the transmission, over a single channel, of four data streams generated by a variety of sources at different (including variable) bit rates. In the original intended application, replicas of this multiplexer/demultiplexer system would be incorporated into the spacecraft-to-ground communication systems of the space shuttles. The multiplexer of each system would be installed in the spacecraft, where it would acquire and process data from such sources as commercial digital camcorders, video tape recorders, and the spacecraft telemetry system. The demultiplexer of each system would be installed in a ground station. Purely terrestrial systems of similar design could be attractive for use in situations in which there are requirements to transmit multiple streams of high-quality video data and possibly other data over single channels. The figure is a block diagram of the multiplexer as configured to process data received via three fiber-optic channels like those of the International Space Station and one electrical-cable channel that conforms to the Institute of Electrical and Electronic Engineers (IEEE) 1394 standard. (This standard consists of specifications of a high-speed serial data interface, the physical layer of which includes a cable known in the art as "FireWire." An IEEE 1394 interface can also transfer power between the components to which it is connected.) The fiber-optic channels carry packet and/or bit-stream signals that conform to the standards of the Consultative Committee for Space Data Systems (CCSDS). The IEEE 1394 interface accepts an isochronous signal like that from a digital camcorder or a video tape recorder. The processing of the four input data streams to combine them into one output stream is governed by a statistical multiplexing algorithm that features a flow-control capability and makes it possible to utilize the transmission channel with nearly 100-percent efficiency. This algorithm allocates the available bandwidth of the transmission channel to the data streams according to a combination of data rates and preassigned priorities. Incoming data streams that demand too much bandwidth are blocked. Bandwidth not needed for a transmission of a given data stream is allocated to other streams as available. Priority is given to the IEEE 1394 stream. In addition to the four incoming data streams, the multiplexer transmits data on the status of the system. An operator can monitor and control the multiplexer via displays and controls on the multiplexer housing. The output of the multiplexer is connected via a coaxial cable with an impedance of 50 Ohms to an interface circuit compatible with the space-shuttle high-speed digital downlink, which operates at a rate of 48 Mb/s.
Using COTS products, standards and intellectual properties (IPs) for all the system and component interfaces is a crucial step toward significant reduction of both system cost and development cost as the COTS interfaces enable other COTS products and IPs to be readily accommodated by the target system architecture. With respect to the long-term survivable systems for deep-space missions, the major challenge for us is, under stringent power and mass constraints, to achieve ultra-high reliability of the system comprising COTS products and standards that are not developed for mission-critical applications. The spirit of our solution is to exploit the pertinent standard features of a COTS product to circumvent its shortcomings, though these standard features may not be originally designed for highly reliable systems. In this paper, we discuss our experiences and findings on the design of an IEEE 1394 compliant fault-tolerant COTS-based bus architecture. We first derive and qualitatively analyze a -'stacktree topology" that not only complies with IEEE 1394 but also enables the implementation of a fault-tolerant bus architecture without node redundancy. We then present a quantitative evaluation that demonstrates significant reliability improvement from the COTS-based fault tolerance.
In this paper, we report our experiences and findings on the design of fault-tolerant bus architecture comprised of two COT buses, the IEEE 1394 and the I***Sup 2***C.
Forests-based measures such as afforestation/reforestation (A/R) and reducing deforestation (RDF) are considered promising options to mitigate climate change, yet their mitigation potentials are limited by economic and biophysical factors that are largely uncertain. The range of mitigation potential estimates from integrated assessment models raises concerns about the capacity of land systems to provide realistic, cost-effective and permanent land-based mitigation. We use the Global Change Analysis Model to quantify the economic mitigation potential of forests-based measures by simulating a climate policy including a tax on greenhouse gas emissions from agriculture, forestry, and other land uses. In addition, we assess how constraining unused arable land (UAL) availability, forestland expansion rates, and global bioenergy demand may influence the forests-based mitigation potential by simulating scenarios with alternative combinations of constraints. Results show that the average forests-based mitigation potential in 2020–2050 increases from 738 MtCO 2 .yr -1 through a forestland increase of 86 Mha in the fully constrained scenario to 1394 MtCO 2 .yr -1 through a forestland increase of 146 Mha when all constraints are relaxed. Regional potentials in terms of A/R and RDF differ strongly between scenarios: unconstrained forest expansion rates mostly increase A/R potentials in northern regions (e.g., +120 MtCO 2 .yr -1 in North America); while unconstrained UAL conversion and low bioenergy demand mostly increase RDF potentials in tropical regions (e.g., +76 and +68 MtCO 2 .yr -1 in Southeast Asia, respectively). This study shows that forests-based mitigation is limited by many factors that constrain the rates of land use change across regions. These factors, often overlooked in modelling exercises, should be carefully addressed for understanding the role of forests in global climate mitigation and defining pledges towards the Paris Agreement.
Analysis of a spectrum of zeta Ori extending from 922 to 1453 A with approximately 0.8 A resolution recorded at rocket altitudes. All lines used in existing models of stellar atmospheres appear in the recorded spectrum with the exception of those masked by telluric N2 or strong P Cygni-type profiles and by an O V line at 1371.29 A. Fifteen multiplets of subordinate lines have been reliably identified, indicating an approximate range of excitation from 0 to 50 eV. Transitions in C III (1176 A), N III (991 A), N V (1239, 1243 A), O VI (1032, 1038 A), Si IV (1394, 1403 A), S IV (1063, 1074 A), and S VI (933, 944 A) have been observed as P Cygni-type profiles presumably arising in a circumstellar envelope. The degree of ionization, transitions present, and mean radial velocities are all consistent with viewing the envelope as a hot (about 100,000 K), rarefied plasma in which collisional ionization is important. Interstellar lines in C I (1277, 1280 A), C II (1036, 1334 A), N I (1134-1135 A), N I (1200-1201 A), N II (1084-1086 A), O I (1302, 1305 A), Si II (1190, 1193 A), Si II (1260 A), and Si II (1304 A) have been definitely identified. Other transitions in Ar II, S I, C I, and Fe II are tentatively identified. The equivalent width of the L alpha line is found to be 10.4 plus or minus 1.6 A, corresponding to a columnar density of 2.0 plus or minus 0.7 x 10 to the 20th per cu cm.
An experimental solar heating and cooling system model has been built and operated, combining elements that are programmable (e.g., heating and cooling load of a building and collected solar energy) with experimental equipment. The experimental system model was based on the loads and components used in the Solar Building Test Facility (SBTF), which includes a 1394 sq m solar collector field at NASA Langley. These tests covered 5 continuous days under summer conditions. For the system model up to 55 percent of the simulated collected solar energy was used for the building load. This amount of solar energy supplied 35 percent of the building cooling load. Heat loss was significant. If tank heat loss were eliminated, which would make it similar to the actual SBTF, 75 percent of the collected solar energy would be used. This amount would supply approximately 50 percent of the building cooling load. A higher fraction of solar energy is possible with a more performance-optimized system.
An experimental solar heating and cooling system model has been built and operated, combining elements that are programmable - heating and/or cooling load of a building, collected solar energy - with experimental equipment. The system model was based on the loads and components used in the Solar Building Test Facility (SBTF) which includes a 1394 square meter solar collector field, at NASA-Langley. Operations covered 5 continuous days under summer conditions. For the system model, up to 55% of the simulated collected solar energy was used for the building load. This amount constituted 35% of the building cooling load. Heat loss was significant. If tank heat loss were eliminated, 75% of the collected solar energy would be used. This amount would supply approximately 50% of the building cooling load.
The IUE satellite spectra of some planetary nebulae show features due to silicon and magnesium: Si III wavelengths 1883, 1892; Si IV wavelengths 1394, 1403; Mg II wavelengths 2796, 2804 and Mg V wavelengths 2784, 2929. With the aid of modeling techniques, the corresponding elemental abundances are found. In addition to previous observations of NGC 7662 and IC 418, data were found for NGC 2440, Hu 1-2, IC 2003 and IC 2165. Silicon appears depleted by up to an order of magnitude relative to the sun. Large variations of magnesium abundance are found, which are likely to reflect differing degrees of depletion due to grain formation.
Eighteen plasma sprayed coating systems, nine based on the NiCoCrAly chemistry and nine based on the CoCrAly composition, were evaluated to identify coating systems which provide equivalent or superior life to that shown by the electron beam physical vapor deposited NiCoCrAly and CoCrAly coatings respectively. NiCoCrAly type coatings were examined on a single crystal alloy and the CoCrAly based coatings were optimized on the B1900+ Hf alloy. Cyclic burner rig oxidation and hot corrosion and tensile ductility tests used to evaluate the various coating candidates. For the single crystal alloy, a low pressure chamber plasma sprayed NiCoCrAly + Si coating exhibited a 2x oxidation life improvement at 1394 K (2050 F) over the vapor deposited NiCoCrAly material while showing equivalent tensile ductility. A silicon modified low pressure chamber plasma sprayed CoCrAly coating was found to be more durable than the baseline vapor deposited CoCrAly coating on the B1900+ Hf alloy.
Low-resolution ultraviolet International Ultraviolet Explorer spectra of the southern white dwarf LB 3303 show the presence of the wavelength 1400 absorption feature reported by Greenstein in the spectrum of 40 Eri B. The equivalent width is 5.7 A, and the measured wavelength is 1394 A. A comparison of the ultraviolet fluxes with model atmospheres confirms that LB 3303 has an effective temperature near 16,000 K, as found earlier from visual wavelength data. There are still problems with the identification of this line. The star is not hot enough to explain the presence of Si IV, and the agreement with the spectrum of the H2 molecule is not convincing.
Theoretical models for the ionization of trace elements in a strong stellar wind by a compact binary X-ray source and for the resulting orbital phase dependence of the emergent soft X-ray spectra and the profiles of ultraviolet resonance lines are presented. Model results agree qualitatively with the X-ray and ultraviolet spectra of the system 4U 0900-40/HD 77581 and explain the suppression of the absorption profiles of the Si IV upsilon 1394 and C IV upsilon 1548 lines when the X-ray sources is in front of the star. The model predicts that the absorption profiles of the N V upsilon 1239 and O VI upsilon 1032 lines will be enhanced rather than suppressed during this orbital phase. We predict phase-dependent linear polarization in the resonance lines profiles. Future observations of these phase dependent effects in early-type binary X-ray systems may be used to investigate the dynamics of stellar winds and their interactions with the X-ray source.
Theoretical models for the ionization of trace elements in a strong stellar wind by a compact binary X-ray source and for the resulting orbital phase dependence of the emergent soft X-ray spectra and the profiles of ultraviolet resonance lines are presented. Model results agree qualitatively with the X-ray and ultraviolet spectra of the system 4U 0900-40/HD 77581 and explain the suppression of the absorption profiles of the Si IV upsilon 1394 and C IV upsilon 1548 lines when the X-ray sources are in front of the star. The model predicts that the absorption profiles of the N V upsilon 1239 and O VI upsilon 1032 lines will be enhanced rather than suppresed during this orbital phase.Phase-dependent linear polarization in the resonance lines profiles is predicted. Future observations of these phase dependent effects in early-type binary X-ray systems may be used to investigate the dynamics of stellar winds and their interactions with the X-ray source.