Search NASA⌕ Search

SEARCH · Search NASA

Results for “16A”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1988

The numerical simulation of transonic separated flow about the complete F-16A

The thin-layer, Reynolds-averaged, Navier-Stokes equations are used to simulate the transonic viscous flow about the complete F-16A fighter aircraft. These computations demonstrate how computational fluid dynamics (CFD) can be used to simulate turbulent viscous flow about realistic aircraft geometries. A zonal grid approach is used to provide adequate viscous grid clustering on all aircraft surfaces. Zonal grids extend inside the F-16A inlet and up to the compressor face while power on conditions are modeled by employing a zonal grid extending from the exhaust nozzle to the far field. A simple solution adaptive grid procedure is used on the wing surface and good agreement with experimental data is obtained. Computations for the F-16A in side slip are also presented.

Flores, Jolen↗
NASA NTRS1987

Transonic analysis of the F-16A with under-wing fuel tanks - An application of the TranAir full-potential code

Initial results obtained using the TranAir transonic full-potential code are presented for a fully configured F-16A geometry, including two 370-gal under-wing fuel tanks, at freestream Mach numbers of 0.6 and 0.9 and angle of attack of 4 deg. The geometry is modeled using surface panels, and the flow field is defined by a rectangular array of flow-field grid points. The paneled geometry is embedded within this rectangular flow field. By avoiding the use of surface-conforming flow-field grids, the modeling generality afforded by surface panels can be utilized to analyze very complex configurations in the transonic flow regime.

Madson, Michael D.↗
NASA NTRS1990

Numerical simulation of an F-16A at angle of attack

The transonic flowfield around an F-16A fighter configuration at a moderate incidence angle is simulated by solving the Navier-Stokes equations on a single-block grid. The numerical solution matches experimental freestream conditions with a mach number of 0.85, 16 degrees angle of attack, and a characteristic Reynolds number of 12.75 million. MacCormack's explicit algorithm is used in conjuction with a local time step and consecutive mesh refinement procedure to accelerate numerical convergence. The Baldwin-Lomax algebraic model provides turbulent closure. Computed surface pressure distributions and the aircraft lift coefficient compare favorably with wind tunnel data. The drag coefficient in the simulation overpredicts the experimental value by 8 percent.

Huband, G. W.↗
NASA NTRS1989

A zonal Navier-Stokes methodology for flow simulation about a complete aircraft

The thin layer, Reynolds-averaged, Navier-Stokes equations are used to simulate the transonic viscous flow about the complete F-16A fighter aircraft. These computations demonstrate how computational fluid dynamics can be used to simulate turbulent viscous flow about realistic aircraft geometries. A zonal grid approach is used to provide adequate viscous grid clustering on all aircraft surfaces. Zonal grids extend inside the F-16A inlet and up to the compressor face while power on conditions are modeled by employing a zonal grid extending from the exhaust nozzle to the far field. Computations are compared with existing experimental data and are in fair agreement. Computations for the F-16A in side slip are also presented.

Flores, Jolen↗
NASA NTRS1992

Lightweight bipolar storage battery

An apparatus [10] is disclosed for a lightweight bipolar battery of the end-plate cell stack design. Current flow through a bipolar cell stack [12] is collected by a pair of copper end-plates [16a,16b] and transferred edgewise out of the battery by a pair of lightweight, low resistance copper terminals [28a,28b]. The copper terminals parallel the surface of a corresponding copper end-plate [16a,16b] to maximize battery throughput. The bipolar cell stack [12], copper end-plates [16a,16b] and copper terminals [28a,28b] are rigidly sandwiched between a pair of nonconductive rigid end-plates [20] having a lightweight fiber honeycomb core which eliminates distortion of individual plates within the bipolar cell stack due to internal pressures. Insulating foam [30] is injected into the fiber honeycomb core to reduce heat transfer into and out of the bipolar cell stack and to maintain uniform cell performance. A sealed battery enclosure [ 22] exposes a pair of terminal ends [26a,26b] for connection with an external circuit.

Rowlette, John J.↗
NASA NTRS1989

Transonic viscous flow computations about a complete aircraft using the Navier-Stokes equations

A numerical approach for simulating the viscous transonic flow about the complete F-16A fighter aircraft is presented using the Navier-Stokes equations. This finite difference approach utilizes a body conforming zonal grid system to provide appropriate viscous clustering near all body surfaces. A comparison between computational and experimental pressure coefficients is good, and integrated quantities such as lift and drag are within 2.6 percent and 1.6 percent, respectively. The versatility of the method is demonstrated by further modeling the flow inside the inlet up to the compressor face and the exhaust nozzle plume. Results for the F-16A in sideslip are also presented and indicate the proper trends.

Chaderjian, Neal M.↗
NASA NTRS1975

Meteoritic trace elements in lunar rock 14321, 184

Measurements are given for sixteen trace elements determined by radiochemical neutron activation analysis in six samples of four components of lunar rock 14321, 184. The samples were of basalt (1B), matrix (9A), microbreccia-2 (15), and microbreccia-3 (14A, 16A, and 19A) components. The ancient meteoritic components in the samples were determined according to the ratios of siderophile elements (Ir/Au and Ge/Au) found in the samples.

Morgan, J. W.↗
NASA NTRS1981

A systematic program of cometary spectroscopy

Some early results of a systematic program of observing the spectroscopic behavior of comets as a function of heliocentric distance are presented. An ultraviolet sensitive microchannel plate intensifier spectrograph was used to record the 3000-5000A spectrum of comets brighter than magnitude 17 with a spectral resolution of 8 or 16A, followed by direct image for better interpretation of the spatial distribution of spectral features. Although the goals of the program require much more time and data, some interesting results from Comets Schwassmann-Wachmann, 1, Bradfield and Bowell were obtained.

Larson, S. M.↗
NASA NTRS1981

Reactivity of pyrylium salts toward basic reactants

The reactivity of some N-acyl and N-sulfonyl-hydrazines 2-4, 10a-10g, 12, 13, 16a, 16b and of hydrazones 18, benzyldihydrazone 21 towards pyrylium salts 1 was examined. By reaction of 2,4,6-trimethyl-pyrylium salt 1 with substituted hydrazines some pyridinium salts were obtained. Relationships between basicity and reactivity were discussed.

Neidlein, R.↗
NASA NTRS1982

Supersonic STOVL research aircraft

Two powered-lift concepts, the tandem fan and the longitudinally-arrayed ejector, are integrated with two existing fighter aircraft, the F-14A and F-16A respectively, to indicate the benefits and/or penalties involved with providing STOVL capability to CTOL aircraft. It is shown that properly designed powered-lift aircraft can achieve either comparable or superior mission performance relative to CTOL aircraft.

Wilson, S. B., III↗
NASA NTRS1984

A preliminary analysis of flight data from the AFTI/F-16 airplane

Flight test data from the AFTI/F-16 airplane are analyzed. Two flight control system modes (Independent Backup Unit and Standard Normal Mode) are considered. Estimated stability and control derivatives are compared with values from the wind tunnel and F-16A flight tests. Modeling difficulties are shown to arise due to the near-neutral static stability of the airplane and the number of coordinated control surface movements commanded in the Standard Normal Mode.

Batterson, J. G.↗
NASA NTRS1986

Application of the TranAir full-potential code to complete configurations

The TranAir computer code solves the full-potential equation for transonic flow by combining a rectangular box of flow-field grid points with networks of surface panels. Complex geometry is easily represented since surface conforming flow-field grids are not used. Application of TranAir to the F-16A is presented for free-stream Mach numbers of 0.6 and 0.90, at an angle of attack of four degrees.

Erickson, L. L.↗
NASA NTRS1987

Strake-generated vortex interactions for a fighter-like configuration

A combination of the Euler, and thin-layer Navier-Stokes equations were solved for the flowfield around a wing-strake-fuselage configuration similar to the F-16A aircraft. The flowfield was divided into multiple blocks using a zoning program, and the TNSWF solution program, based on an implicit solution algorithm, updates each subregion of the flowfield sequentially. The total grid contained approximately 300,000 grid points, and clustering was effected normal to all aircraft surfaces. The computed solutions agreed well quantitatively with wind-tunnel pressure distribution data, and they agreed well qualitatively with flow visualization from wind- and water-tunnel tests.

Reznick, Steven G.↗
NASA NTRS1987

Transonic Navier-Stokes solutions for a fighter-like configuration

The Transonic Navier-Stokes wing code is extended to a 16-zone TNS wing-fuselage code and used to solve the transonic viscous flow over a modified F-16A. The computer code, called Transonic Navier-Stokes Wing/Fuselage uses a zonal approach to solve the three-dimensional Euler and Navier-Stokes equations. With the zonal implementation, clustering suitable for viscous calculations is achieved on all solid surfaces. The transonic case has flow conditions of free-stream M = 0.9, alpha = 4.12 deg, and a Reynolds number based on root chord of 4.5 million. This case required about 3,000 iterations to reduce the L2-norm of the residual by three orders, which takes about 15 hr of cpu time on the Cray X-MP/48 processor. Pressure distributions, as well as separaton patterns, compare favorably with experiment for this transonic case.

Flores, Jolen↗
NASA NTRS1987

Simulation of transonic viscous flow over a fighter-like configuration including inlet

The simulation of transonic viscous flow over a modified F-16A including inlet is presented. A zonal approach is utilized which allows appropriate clustering suitable for viscous calculations on all solid surfaces. Computational efficiency is enhanced by solving the thin-layer Navier-Stokes equations in viscous zones adjacent to the aircraft and the Euler equations on those coarse zones away from the aircraft. The flow conditions for this transonic case are freestream Mach number of 0.9, angle of attack of 4.12 deg, and a Reynolds number (based on root chord) of 4.5 million. A total of 19 zones are utilized yielding a total of 350,000 grid points. This case required about 3000 iterations to reduce the residual by three orders, which takes about 10 hr of CPU time on the Cray X-MP/48 computer. Pressure distributions on the wing and on cross sections through the inlet region compare favorably with the experimental data for this transonic case.

Flores, Jolen↗
NASA NTRS1988

Applications of the Navier-Stokes equations to wings and complex configurations using a zonal approach

The simulation of a transonic viscous flow over a series of 3-D configurations, ranging from isolated wings to relatively complete aircraft, is presented. A fast, diagonalized Beam-Warming algorithm is used in conjunction with a zonal approach to solve the Euler/Navier-Stokes equations for these applications. The computer code, called Transonic Navier-Stokes, uses four zones for wing configurations and up to 19 zones for more complete aircraft configurations. For the inner zones adjacent to no-slip surfaces, the thin-layer Navier-Stokes equations are solved, while in the outer zones the Euler equations are solved. Numerical results are presented and compared with experiment (when available) for wing calculations and a more complete configuration based on the F-16A aircraft.

Flores, Jolen↗