Search NASA⌕ Search

SEARCH · Search NASA

Results for “174 A B”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Advanced Test Reactor Neutron Dosimetry Report – 174 A & B

Results of neutron dosimetry measurements in ATR for cycle 174 A B are presented. Cobalt and nickel wires were installed in numerous irradiation locations for the duration of the cycle. The specific activity of these wire segments can be used in conjunction with the presented cycle history information to determine the thermal- and fast-neutron fluence rates for each irradiation position during the cycle using the referenced standard test methods.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Microwave and infrared simulations of an intense convective system and comparison with aircraft observations

A three-dimensional cloud model, radiative transfer model-based simulation system is tested and validated against the aircraft-based radiance observations of an intense convective system in southeastern Virginia on 29 June 1986 during the Cooperative Huntsville Meteorological Experiment. NASA's ER-2, a high-altitude research aircraft with a complement of radiometers operating at 11-micrometer infrared channel and 18-, 37-, 92-, and 183-GHz microwave channels provided data for this study. The cloud model successfully simulated the cloud system with regard to aircraft- and radar-observed cloud-top heights and diameters and with regard to radar-observed reflectivity structure. For the simulation time found to correspond best with the aircraft- and radar-observed structure, brightness temperatures T(sub b) are simulated and compared with observations for all the microwave frequencies along with the 11-micrometer infrared channel. Radiance calculations at the various frequencies correspond well with the aircraft observations in the areas of deep convection. The clustering of 37-147-GHz T(sub b) observations and the isolation of the 18-GHz values over the convective cores are well simulated by the model. The radiative transfer model, in general, is able to simulate the observations reasonably well from 18 GHz through 174 GHz within all convective areas of the cloud system. When the aircraft-observed 18- and 37-GHz, and 90- and 174-GHz T(sub b) are plotted against each other, the relationships have a gradual difference in the slope due to the differences in the ice particle size in the convective and more stratiform areas of the cloud. The model is able to capture these differences observed by the aircraft. Brightness temperature-rain rate relationships compare reasonably well with the aircraft observations in terms of the slope of the relationship. The model calculations are also extended to select high-frequency channels at 220, 340, and 400 GHz to simulate the Millimeter-wave Imaging Radiometer aircraft instrument to be flown in the near future. All three of these frequencies are able to discriminate the convective and anvil portions of the system, providing useful information similar to that from the frequencies below 183 GHz but with potentially enhanced spatial resolution from a satellite platform. In thin clouds, the dominant effect of water vapor is seen at 174, 340, and 400 GHz. In thick cloudy areas, the scattering effect is dominant at 90 and 220 GHz, while the overlaying water vapor can attenuate at 174, 340, and 400 GHz. All frequencies (90-400 GHz) show strong signatures in the core.

Prasad, N.↗

Genome‐wide association studies on resistance to powdery mildew in cultivated emmer wheat

Abstract Powdery mildew, caused by the fungal pathogenBlumeria graminis(DC.) E. O. Speer f. sp.triticiEm. Marchal (Bgt), is a constant threat to global wheat (Triticum aestivumL.) production. Although ∼100 powdery mildew (Pm) resistance genes and alleles have been identified in wheat and its relatives, more is needed to minimizeBgt’s fast evolving virulence. In tetraploid wheat (Triticum turgidumL.), wild emmer wheat [T. turgidumssp.dicoccoides(Körn. ex Asch. & Graebn.) Thell.] accessions from Israel have contributed manyPmresistance genes. However, the diverse genetic reservoirs of cultivated emmer wheat [T. turgidumssp.dicoccum(Schrank ex Schübl.) Thell.] have not been fully exploited. In the present study, we evaluated a diverse panel of 174 cultivated emmer accessions for their reaction toBgtisolateOKS(14)‐B‐3‐1and found that 66% of accessions, particularly those of Ethiopian (30.5%) and Indian (6.3%) origins, exhibited high resistance. To determine the genetic basis ofBgtresistance in the panel, genome‐wide association studies were performed using 46,383 single nucleotide polymorphisms (SNPs) from genotype‐by‐sequencing and 4331 SNPs from the 9K SNP Infinium array. Twenty‐five significant SNP markers were identified to be associated withBgtresistance, of which 21 SNPs are likely novel loci, whereas four possibly represent emmer derivedPm4a,Pm5a,PmG16, andPm64. Most novel loci exhibited minor effects, whereas three novel loci on chromosome arms 2AS, 3BS, and 5AL had major effect on the phenotypic variance. This study demonstrates cultivated emmer as a rich source of powdery mildew resistance, and the resistant accessions and novel loci found herein can be utilized in wheat breeding programs to enhanceBgtresistance in wheat.

Genetics & Heredity↗

A 0.18 micrometer CMOS Thermopile Readout ASIC Immune to 50 MRAD Total Ionizing Dose (SI) and Single Event Latchup to 174MeV-cm(exp 2)/mg

Radiation hardened by design (RHBD) techniques allow commercial CMOS circuits to operate in high total ionizing dose and particle fluence environments. Our radiation hard multi-channel digitizer (MCD) ASIC (Figure 1) is a versatile analog system on a chip (SoC) fabricated in 180nm CMOS. It provides 18 chopper stabilized amplifier channels, a 16- bit sigma-delta analog-digital converter (SDADC) and an on-chip controller. The MCD was evaluated at Goddard Space Flight Center and Texas A&M University's radiation effects facilities and found to be immune to single event latchup (SEL) and total ionizing dose (TID) at 174 MeV-cm(exp 2)/mg and 50 Mrad (Si) respectively.

radiation hardened by design↗

Thermal Radiometer Signal Processing Using Radiation Hard CMOS Application Specific Integrated Circuits for Use in Harsh Planetary Environments

Thermal radiometers such as proposed for the Europa Clipper flyby mission require low noise signal processing for thermal imaging with immunity to Total Ionizing Dose (TID) and Single Event Latchup (SEL). Described is a second generation Multi- Channel Digitizer (MCD2G) Application Specific Integrated Circuit (ASIC) that accurately digitizes up to 40 thermopile pixels with greater than 50 Mrad (Si) immunity TID and 174 MeV-sq cm/mg SEL. The MCD2G ASIC uses Radiation Hardened By Design (RHBD) techniques with a 180 nm CMOS process node.

Focal Plane Assembly↗

Plant biomass fermentation by the extreme thermophile Caldicellulosiruptor bescii for co-production of green hydrogen and acetone: Technoeconomic analysis

A variety of chemical and biological processes have been proposed for conversion of sustainable low-cost feedstocks into industrial products. Here, a biorefinery concept is formulated, modeled, and analyzed in which a naturally (hemi)cellulolytic and extremely thermophilic bacterium, Caldicellulosiruptor bescii, is metabolically engineered to convert the carbohydrate content of lignocellulosic biomasses (i.e., soybean hulls, transgenic poplar) into green hydrogen and acetone. Experimental validation of C. bescii fermentative performance demonstrated 82% carbohydrate solubilization of soybean hulls and 55% for transgenic poplar. A detailed technical design, including equipment specifications, provides the basis for an economic analysis that establishes metabolic engineering targets. This robust industrial process leveraging metabolically engineered C. bescii yields 206 kg acetone and 25 kg H 2 per metric ton of soybean hull, or 174 kg acetone and 21 kg H 2 per metric ton transgenic poplar. Beyond this specific case, the model demonstrates industrial feasibility and economic advantages of thermophilic fermentation.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Phenotypic characterization of xpr, a global regulator of extracellular virulence factors in Staphylococcus aureus

We recently described a Tn551 insertion in the chromosome of Staphylococcus aureus S6C that resulted in drastically reduced expression of extracellular lipase (M. S. Smeltzer, S. R. Gill, and J. J. Iandolo, J. Bacteriol. 174:4000-4006, 1992). The insertion was localized to a chromosomal site (designated omega 1058) distinct from the lipase structural gene (geh) and the accessory gene regulator (agr), both of which were structurally intact in the lipase-negative (Lip-) mutants. In this report, we describe a phenotypic comparison between strains S6C, a hyperproducer of enterotoxin B; KSI9051, a derivative of S6C carrying the Tn551 insertion at omega 1058; ISP546, an 8325-4 strain that carries a Tn551 insertion in the agr locus; and ISP479C, the parent strain of ISP546 cured of the Tn551 delivery plasmid pI258repA36. Compared with their respective parent strains, ISP546 and KSI9051 produced greatly reduced amounts of lipase, alpha-toxin, delta-toxin, protease, and nuclease. KSI9051 also produced reduced amounts of staphylococcal enterotoxin B. Coagulase production was increased in ISP546 but not in KSI9051. Using a mouse model, we also demonstrated that ISP546 and KSI9051 were far less virulent than ISP479C and S6C. We have designated the genetic element defined by the Tn551 insertion at omega 1058 xpr to denote its role as a regulator of extracellular protein synthesis. We conclude that xpr and agr are similar and possibly interactive regulatory genes that play an important role in pathogenesis of staphylococcal disease.

NASA Discipline Cell Biology↗

Molecular Cage Reports on Its Contents: Spectroscopic Signatures of Cryo-Cooled K + - and Ba 2+ -Benzocryptand Complexes

UV photofragment spectroscopy and IR–UV double resonance methods are used to determine the structure and spectroscopic responses of a three-dimensional [2.2.2]-benzocryptand cage to the incorporation of a single K + or Ba 2+ imbedded inside it (labeled as K + -BzCrypt, Ba 2+ -BzCrypt). We studied the isolated ion-cryptand complex under cryo-cooled conditions, brought into the gas phase by nano-electrospray ionization. Incorporation of a phenyl ring in place of the central ethyl group in one of the three N-CH 2 -CH 2 -O-CH 2 -CH 2 -O-CH 2 -CH 2 -N chains provides a UV chromophore whose S 0 –S 1 transition we probe. K + -BzCrypt and Ba 2+ -BzCrypt have their S 0 –S 1 origin transitions at 35,925 and 36,446 cm –1 , respectively, blue-shifted by 174 and 695 cm –1 from that of 1,2-dimethoxybenzene. These origins are used to excite a single conformation of each complex selectively and record their IR spectra using IR–UV dip spectroscopy. The alkyl CH stretch region (2800–3000 cm –1 ) is surprisingly sensitive to the presence and nature of the encapsulated ion. We carried out an exhaustive conformational search of cage conformations for K + -BzCrypt and Ba 2+ -BzCrypt, identifying two conformations (A and B) that lie below all others in energy. Here, we extend our local mode anharmonic model of the CH stretch region to these strongly bound ion-cage complexes to predict conformation-specific alkyl CH stretch spectra, obtaining quantitative agreement with experiment for conformer A, the gas-phase global minimum. The large electrostatic effect of the charge on the O- and N-lone pairs affects the local mode frequencies of the CH 2 groups adjacent to these atoms. The localized CH 2 scissors modes are pushed up in frequency by the adjacent O/N-atoms so that their overtones have little effect on the alkyl CH stretch region. However, the localized CH 2 wags are nearly degenerate and strongly coupled to one another, producing an array of delocalized wag normal modes, whose highest frequency members reach up above 1400 cm –1 . As such, their overtones mix significantly with the CH stretch modes, most notably involving the CH 2 symmetric stretch fundamentals of the central ethyl groups in the all-alkyl chains and the CH stretches adjacent to the N-atoms and antiperiplanar to the nitrogen lone pair.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

pCAM precursor produced from electroextraction technology and its application in synthesis of NMC 811 cathode material

The synthesis and characterization of LiNi 0.8 Co 0.1 Mn 0.1 O 2 (LNMC811) cathodes produced from recycled hydroxide precursors obtained from spent lithium-ion batteries is evaluated. Two precursor batches (Sample 1 and Sample 2) are prepared using modified recycling processes to examine how residual impurities and processing conditions influence the properties of the regenerated materials. Structural and compositional characterization by X-ray diffraction, ICP and SEM shows that the recycled precursors exhibit layered hydroxide structures containing both α Ni(OH) 2 and β Ni(OH) 2 phases. Trace impurities including sodium, boron, and aluminum are detected and partially mitigated during processing, with boron found to play a beneficial role in electrochemical behavior. Following lithiation with lithium carbonate and lithium hydroxide at 800 °C under an oxygen rich atmosphere, the resulting LNMC811 materials show electrochemical performance comparable to conventionally synthesized cathodes. Sample 2, which contains higher boron levels and improved cation ordering, delivers an initial discharge capacity of 174 mAh g -1 and retains more than 93 percent of its capacity after 50 cycles. The stable cycling behavior and structural integrity of these materials demonstrate that recycled precursors can be converted into high performance layered cathodes and support recycling as a practical and sustainable route for lithium-ion battery manufacturing.

25 ENERGY STORAGE↗

Laboratory and astronomical measurement of the millimeter wave spectrum of the ethynyl radical CCH

The N = 0 yields 1 and 1 yields 2 rotational transitions of CCH at 87 and 174 GHz, respectively, have been detected in a laboratory glow discharge in a mixture of He and C2H2. The spectroscopic constants of CCH derived from measurements of the hfs of the transitions agree well with those derived from astronomical observations, confirming the astronomical detection of CCH. As the CCH lines in the Orion Nebula are narrower than the laboratory lines but less certain in rest frequency owing to uncertainty in the radial velocity, the most accurate values for the spectroscopic constants of CCH are obtained from a simultaneous fit of both the laboratory and astronomical data. For the rotation, centrifugal distortion, spin-rotation, and hyperfine constants, respectively, the values found are within 0.006 of 43674.534 MHz, within 0.0008 of 0.1071 MHz, within 0.004 of -62.606 MHz, b = within 0.019 MHz of 40.426, and c is within 0.026 of 12.254 MHz.

Gottlieb, C. A.↗

Search for rare alpha and double beta decays of Yb isotopes to excited levels of daughter nuclei

A search for alpha and double beta decays of ytterbium isotopes was performed with an ultra low-background high purity germanium detector at Gran Sasso Underground Laboratory (Italy). A 194.7 g Yb 2 (C 2 O 4 ) 3 powder sample was measured for 11.3 days with a total Yb exposure of 1.25 kg×day. Half-life limits for α-decay modes of 168 Yb, 170 Yb, 171 Yb, 172 Yb, 173 Yb, 174 Yb and 176 Yb into the first excited states have been obtained between 6 × 10 14 years and 2 × 10 16 years. These are the first experimental constraints of these decay modes. Double electron capture of 168 Yb and double beta decay of 176 Yb into the first excited 2 + and 0 + states could be excluded with limits between 1 × 10 14 years to 8 × 10 16 years. This improves the experimental information on some of the decay modes compared to previous constraints.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

A spaceborne receiver for measuring electromagnetic field intensity

Description of a very accurately controlled receiver for monitoring the electromagnetic radiations in both existing and projected space communication bands. Based on analysis of the existing and projected space communication bands, 108 to 174 MHz, 240 to 478 MHz, and 1535 to 1665 MHz were covered. The receiver achieves accurate control via a digitally tuned synthesizer and a wide range of digital control including frequency band coverage and gain control selection. Digital memory was provided to store 16 separate digital command instructions which can be programmed via a command data link. The receiver provides for transmission to the ground of both a predetection signal and signals in digital format, which in turn, were provided by sampling and analog-to-digital conversions.

Reich, B. W.↗

Bridging knowledge gaps in liquid- and vapor-fed CO 2 electrolysis through active electrode area

Increased use of gas diffusion electrodes for CO 2 electroreduction widens the experimental phase space that was previously inaccessible using foil electrodes, raising fundamental questions over the impacts of key variables that translate between liquid- and vapor-fed CO 2 electrolysis systems. This work focuses on studying the interplay of current-potential profiles and electrochemically active surface area (ECSA) by implementing a Cu nanoflower catalyst morphology. The results show decreased overpotentials as much as 460 and 174 mV for foil and gas diffusion electrodes, respectively, while maintaining or improving multi-carbon product current density. Furthermore, these overpotential shifts and product activities normalized by ECSA lead to current-potential relationships akin to those of the Tafel description, which are found through a continuum model to be useful for describing the roughness dependence for both liquid- and vapor-fed systems. This analysis establishes a holistic approach for establishing catalyst design criteria to improve materials development for CO 2 .

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Increasing the census of ultracool dwarfs in wide binary and multiple systems using Dark Energy Survey DR1 and Gaia DR2 data

ABSTRACT We present the discovery of 255 binary and 6 multiple system candidates with wide (> 5 arcsec) separation composed by ultracool dwarfs (UCDs) companions to stars, plus nine double ultracool dwarf systems. These systems were selected based on common distance criteria. About 90 per cent of the total sample has proper motions available and 73 per cent of the systems also satisfy a common proper motion criterion. The sample of ultracool candidates was taken from the Dark Energy Survey (DES) and the candidate stellar primaries are from Gaia DR2 and DES data. We compute chance alignment probabilities in order to assess the physical nature of each pair. We find that 174 candidate pairs with Gaia DR2 primaries and 81 pairs with a DES star as a primary have chance alignment probabilities $\lt 5{{\ \rm per\ cent}}$. Only nine candidate systems composed of two UCDs were identified. The sample of candidate multiple systems is made up of five triple systems and one quadruple system. The majority of the UCDs found in binaries and multiples are of early L type and the typical wide binary fraction over the L spectral types is $2\!-\!4{{\ \rm per\ cent}}$. Our sample of candidate wide binaries with UCDs as secondaries constitutes a substantial increase over the known number of such systems, which are very useful to constrain the formation and evolution of UCDs.

79 ASTRONOMY AND ASTROPHYSICS↗

Isomeric and beta-decay spectroscopy of 173,174 Ho

β-decay spectroscopy of 173,174 Ho (Z = 67, N = 106,107) was conducted at Radioactive Isotope Beam Factory at RIKEN by using in-flight fission of a 345-MeV/u 238 U primary beam. A previously unreported isomeric state at 405 keV with half-life of 3.7(12) μs and a spin and parity of (3/2 + ) is identified in 173 Ho. Moreover, a new state with a spin and parity of 9 - was discovered in 174 Er. The experimental log ft values of 5.84(20) and 5.25(18) suggest an allowed-hindered β decay from the ground state of 174 Ho to the K π = 8 - isomeric state in 174 Er. Configuration-constrained potential energy surface (PES) calculations were performed and the predictions are in reasonable agreement with the experimental results.

150 ≤ A ≤ 189↗

Benefit Assessment of the Precision Departure Release Capability Concept

A Precision Departure Release Capability concept is being evaluated by both the National Aeronautics and Space Administration and the Federal Aviation Administration as part of a larger goal of improving throughput, efficiency and capacity in integrated departure, arrival and surface operations. The concept is believed to have the potential of increasing flight efficiency and throughput by avoiding missing assigned slots and minimizing speed increase or path stretch to recover the slot. The main thrust of the paper is determining the impact of early and late departures from the departure runway when an aircraft has a slot assigned either at a meter fix or at the arrival airport. Results reported in the paper are for two scenarios. The first scenario considers flights out of Dallas/Fort Worth destined for Hartsfield-Jackson International Airport in Atlanta flying through the Meridian meter-fix in the Memphis Center with miles-in-trail constraints. The second scenario considers flights destined to George Bush Intercontinental/Houston Airport with specified airport arrival rate constraint. Results show that delay reduction can be achieved by allowing reasonable speed changes in scheduling. It was determined that the traffic volume between Dallas/Fort Worth and Atlanta via the Meridian fix is low and the departures times are spread enough that large departure schedule uncertainty can be tolerated. Flights can depart early or late within 90 minutes without accruing much more delay due to miles-in-trail constraint at the Meridian fix. In the Houston scenario, 808 arrivals from 174 airports were considered. Results show that delay experienced by the 16 Dallas/Fort Worth departures is higher if initial schedules of the remaining 792 flights are kept unaltered while they are rescheduled. Analysis shows that the probability of getting the initially assigned slot back after perturbation and rescheduling decreases with increasing standard deviation of the departure delay distributions. Results show that most Houston arrivals can be expected to be on time based on the assumed zero-mean Normal departure delay distributions achievable by Precision Departure Release Capability. In the current system, airport-departure delay, which is the sum of gate-departure delay and taxi-out delay, is observed at the airports. This delay acts as a bias, which can be reduced by Precision Departure Release Capability.

Palopo, Kee↗

Ticosonde CFH at Costa Rica: A Seasonal Climatology of Tropical UT-LS Water Vapor and Inter-Comparisons with MLS and CALIPSO

Balloon sonde measurements of tropical water vapor using the Cryogenic Frostpoint Hygrometer were initiated in Costa Rica in July 2005 and have continued to the present day. Over the nine years through July 2014, the Ticosonde program has launched 174 CFH payloads, representing the longest-running and most extensive single-site balloon dataset for tropical water vapor. In this presentation we present a seasonal climatology for water vapor and ozone at Costa Rica and examine the frequency of upper tropospheric supersaturation with comparisons to cloud fraction and cloud ice water content observations from the Cloud Aerosol Lidar with Orthogonal Polarization (CALIOP) on the CALIPSO mission. We then make a critical comparison of these data to water vapor measurements from the MLS instrument on board Aura in light of recently published work for other sites. Finally, we examine time series of 2-km altitude averages in the upper troposphere-lower stratosphere at Costa Rica in light of anomalies and trends seen in various large-scale indices of tropical water vapor.

water vapor↗

Nuclear Safety [Vol. 35, No. 1, January-June 1994]

Nuclear Safety is a review journal that covers significant developments in the field of nuclear safety. Its scope includes the analysis and control of hazards associated with nuclear energy, operations involving fissionable materials, and the products of nuclear fission and their effects on the environment. Primary emphasis is on safety in reactor design, construction, and operation; however, the safety aspects of the entire fuel cycle, including fuel fabrication, spent-fuel processing, nuclear waste disposal, handling of radioisotopes, and environmental effects of these operations, are also treated. Table of Contents for this issue follows. GENERAL SAFETY CONSIDERATIONS: THE CHERNOBYL ACCIDENT: 1 Chernobyl Accident Management Actions, A. R Sich 25 The IAEA-ASSET Approach to Avoiding Accidents is to Recognize the Precursors to Prevent Incidents, F. Reisch; ACCIDENT ANALYSIS: 36 A Review of the Available Information on the Triggering Stage of a Steam Explosion, D. F. Fletcher; 58 Analysis and Modeling of Flow-Blockage-Induced Steam Explosion Events in the High-Flux Isotope Reactor, R. P. Taleyarkhan, V. Georgevich, C. W. Nestor, U. Gat, B. L. Lepard, D. H. Cook, J. Freels, S. J. Chang, C. Luttrell, R. C. Gwaltney, and J. Kirkpatrick; 74 An Analysis of Disassembling the Radial Reflector of a Thermionic Space Nuclear Reactor Power System, M. S. El-Genk and D. V. Paramonov; CONTROL AND INSTRUMENTATION: 86 Standards for High-Integrity Software, D. R. Wallace, D. R. Kuhn, L M. Ippolito, and L. Beltracchi; DESIGN FEATURES: 98 Adoption of New Design Features for the Next Generation Nuclear Power Reactors, L. S. Tong; 114 Review of Nuclear Piping Seismic Design Requirements, G. C. Slagis and S. E. Moore; ENVIRONMENTAL EFFECTS: 128 PC-Based Probabilistic Safety Assessment Study for a Geological Waste Repository Placed in a Bedded Salt Formation, S. A. Khan; OPERATING EXPERIENCES: 142 Managing Aging in Nuclear Power Plants: Insights from NRC’s Maintenance Team Inspection Reports, A. Fresco and M. Subudhi; 150 Reactor Shutdown Experience, Compiled by J. W. Cletcher; 153 Selected Safety-Related Events, Compiled by G. A. Murphy; RECENT DEVELOPMENTS: 158 Reports, Standards, and Safety Guides, D. S. Queener; 168 Proposed Rule Changes as of Dec. 31, 1993; ANNOUNCEMENTS: 177 Symposium on Radioactive and Mixed Waste—Risk as a Basis for Waste Classification; 177 1995 Incineration Conference 178 Ninth Power Plant Dynamics Control and Testing Symposium; 174 The Authors

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗