Search NASA⌕ Search

SEARCH · Search NASA

Results for “1D magnetism”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

1D Magnetic MX 3 Single-Chains (M = Cr, V and X = Cl, Br, I)

Magnetic materials in reduced dimensions are not only excellent platforms for fundamental studies of magnetism, but they play crucial roles in technological advances. The discovery of intrinsic magnetism in monolayer 2D van der Waals systems has sparked enormous interest, but the single-chain limit of 1D magnetic van der Waals materials has been largely unexplored. This paper reports on a family of 1D magnetic van der Waals materials with composition MX 3 (M = Cr, V, and X = Cl, Br, I), prepared in fully-isolated fashion within the protective cores of carbon nanotubes. Atomic-resolution scanning transmission electron microscopy identifies unique structures that differ from the well-known 2D honeycomb lattice MX 3 structure. Density functional theory calculations reveal charge-driven reversible magnetic phase transitions.

1D materials↗
DOE OSTI2024

Anisotropic 2D van der Waals Magnets Hosting 1D Spin Chains

Abstract The exploration of 1D magnetism, frequently portrayed as spin chains, constitutes an actively pursued research field that illuminates fundamental principles in many‐body problems and applications in magnonics and spintronics. The inherent reduction in dimensionality often leads to robust spin fluctuations, impacting magnetic ordering and resulting in novel magnetic phenomena. Here, structural, magnetic, and optical properties of highly anisotropic 2D van der Waals antiferromagnets that uniquely host spin chains are explored. First‐principle calculations reveal that the weakest interaction is interchain, leading to essentially 1D magnetic behavior in each layer. With the additional degree of freedom arising from its anisotropic structure, the structure is engineered by alloying, varying the 1D spin chain lengths using electron beam irradiation, or twisting for localized patterning, and spin textures are calculated, predicting robust stability of the antiferromagnetic ordering. Comparing with other spin chain magnets, these materials are anticipated to bring fresh perspectives on harvesting low‐dimensional magnetism.

1D magnetism↗
DOE OSTI2023

Quasi-one-dimensional Pb 5 Re 3 O 15 : A 5 d realization of the Heisenberg antiferromagnetic spin-1/2 chain

Quasi-one-dimensional (1D) magnetic compounds connect the exact solutions of low-dimensional magnetic geometries, which promise quantum spin liquid behavior and exotic quasiparticles, with real-world materials, in which competing magnetic interactions affect their implementation in quantum information science. Here, the structural determination and quasi-1D magnetic behavior of a previously unreported compound, Pb 5 ⁢Re 3 ⁡O 15 , is presented. Like the anisotropic triangular A 3 ⁢ReO 5 ⁢Cl 2 (A = Ba, Sr, Ca) materials, Pb 5 ⁢Re 3 ⁡O 15 contains [ReO 5 ] square pyramids inserted into anion-centered quasi-two-dimensional layers and hosts spin-1/2 moments on the Re 6+ ions. Pb 5 ⁢Re 3 ⁡O 15 , however, has a more ideal quasi-1D geometry than the A 3 ⁢ReO 5 ⁢Cl 2 materials, with larger interchain distances and interlayer spacing. Quasi-1D magnetic behavior in Pb 5 ⁢Re 3 ⁡O 15 is confirmed by fitting the temperature-dependent magnetic susceptibility with the Bonner-Fisher model for a spin-1/2 antiferromagnetically coupled chain, yielding an intrachain coupling constant of |J|/k B =54.5K. Pb 5 ⁢Re 3 ⁡O 15 is highly insulating at room temperature, and heat capacity data below 10 K reveal a linear-T contribution that suggests the presence of low-temperature spinon excitations. Finally, with a lack of three-dimensional ordering down to at least 0.6 K, Pb 5 ⁢Re 3 ⁡O 15 is proposed as a model system for studying the quantum magnetism of quasi-1D Heisenberg chains in a real-world 5d 1 antiferromagnetic material.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Structure-Spin-Transport Anomaly in Quasi-One-Dimensional Ba9Fe3Te15 under High Pressure

Recently, a series of novel compounds Ba3MX5 (M= Fe, Ti, V; X=Se, Te) with hexagonal crystal structures composed of quasi-1-dimensional (1D) magnetic chains has been synthesized by our research team using high-pressure and high-temperature methods. The initial hexagonal phases persist to the maximum achievable pressure, while spin configurations and magnetic interactions may change dramatically as a result of considerable reductions in interchain separations upon pressurization. These compounds therefore offer unique possibilities for studying the evolution of intrinsic electronic structures in quasi-1D magnetic systems. Here we present a systematic investigation of Ba9Fe3Te15, in which the interchain separations between trimerized 1D chains (~10.2 Å) can be effectively modulated by external high pressure. The crystal structure especially along the 1D chains exhibits an abnormal expansion at ~5GPa, which accompanies trimerization entangled anomalous mixed-high-low spin transition. An insulator-metal transition has been observed under high pressure as a result of charge-transfer gap closing. Pressure-induced superconductivity emerges at 26GPa, where the charge-transfer gap fully closes, 3D electronic configuration forms and local spin fully collapses.

Zhang, Jun↗
DOE OSTI2021

Ultrathin, High-Aspect Ratio, and Free-Standing Magnetic Nanowires by Exfoliation of Ferromagnetic Quasi-One-Dimensional van der Waals Lattices

Driven by numerous discoveries of novel physical properties and integration into functional devices, interest in one-dimensional (1D) magnetic nanostructures has grown tremendously. Traditionally, such structures are accessed with bottom-up techniques, but these require increasing sophistication to allow precise control over crystallinity, branching, aspect ratio, and surface termination, especially when approaching the subnanometer regime in magnetic phases. In this work, we show that mechanical exfoliation of bulk quasi-one-dimensional crystals, a method similar to those popularized for two-dimensional van der Waals (vdW) lattices, serves as an efficient top-down method to produce ultrathin freestanding nanowires that are both magnetic and semiconducting. We use CrSbSe 3 as a representative quasi-1D vdW crystal with strong magnetocrystalline anisotropy and show that it can be exfoliated into nanowires with an average cross-section of 10 ± 2.8 nm. The CrSbSe 3 nanowires display reduced Curie–Weiss temperature but higher coercivity and remanence than the bulk phase. The methodology developed here for CrSbSe 3 , a representative for a vast class of 1D vdW lattices, serves as a blueprint for investigating confinement effects for 1D materials and accessing functional nanowires that are difficult to produce via traditional bottom-up methods.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Magnetized ICF implosions: Ignition at low laser energy using designs with more ablator mass remaining

This paper is the first work to redesign a spherical ICF implosion to best utilize the benefits of applying an external magnetic field. The sub-ignition experiment N170601 is taken as the baseline design, which used 1.57 MJ of laser energy. The optimum magnetized design benefits from increasing the shell thickness by 14 μ m and decreasing the ice thickness by 18 μ m, resulting in a neutron yield of 8.9 × 10 17 . This is 34 × greater than the unmagnetized simulation of the same design, and 18.5 × the greatest unmagnetized simulation across all designs simulated. The resultant implosion velocity for the magnetized design is lower, which would also reduce ablation front instability growth. This design was found by using a simplified 1D magnetization model and then validated against full 2D extended-MHD capsule simulations with radiation asymmetries applied to correct the shape.

Walsh, Christopher A. [Lawrence Livermore National↗
NASA NTRS2003

Experimental High Temperature Characterization of a Magnetic Bearing for Turbomachinery

Open loop, experimental force and power measurements of a radial, redundant-axis, magnetic bearing at temperatures to 1000 F (538 C) and rotor speeds to 15,000 RPM along with theoretical temperature and force models are presented in this paper. The experimentally measured force produced by a single C-core using 22A was 600 lb. (2.67 kN) at room temperature and 380 lb. (1.69 kN) at 1000 F (538 C). These values were compared with force predictions based on a 1D magnetic circuit analysis and a thermal analysis of gap growth as a function of temperature. Tests under rotating conditions showed that rotor speed has a negligible effect on the bearing s load capacity. One C-core required approximately 340 W of power to generate 190 lb. (8.45 kN) of magnetic force at 1000 F (538 C); however the magnetic air gap was much larger than at room temperature. The data presented is after the bearing had already operated six thermal cycles and eleven total (not consecutive) hours at 1000 F (538 C).

Montague, Gerald↗
NASA NTRS2003

Fault Tolerant Homopolar Magnetic Bearings

Magnetic suspensions (MS) satisfy the long life and low loss conditions demanded by satellite and ISS based flywheels used for Energy Storage and Attitude Control (ACESE) service. This paper summarizes the development of a novel MS that improves reliability via fault tolerant operation. Specifically, flux coupling between poles of a homopolar magnetic bearing is shown to deliver desired forces even after termination of coil currents to a subset of failed poles . Linear, coordinate decoupled force-voltage relations are also maintained before and after failure by bias linearization. Current distribution matrices (CDM) which adjust the currents and fluxes following a pole set failure are determined for many faulted pole combinations. The CDM s and the system responses are obtained utilizing 1D magnetic circuit models with fringe and leakage factors derived from detailed, 3D, finite element field models. Reliability results are presented vs. detection/correction delay time and individual power amplifier reliability for 4, 6, and 7 pole configurations. Reliability is shown for two success criteria, i.e. (a) no catcher bearing contact following pole failures and (b) re-levitation off of the catcher bearings following pole failures. An advantage of the method presented over other redundant operation approaches is a significantly reduced requirement for backup hardware such as additional actuators or power amplifiers.

Li, Ming-Hsiu↗
DOE OSTI2020

Chiral symmetry and scale invariance breaking in spin chains

The effects of the Dzyaloshinsky-Moriya interaction on finite size one-dimensional (1D) magnetic chains are investigated as a function of their length. The magnetic configuration the system adopts for varying boundary conditions are explored analytically, which leads to the appearance of chiral configurations that play a crucial role. The coercive and exchange bias fields show an unexpected chain length dependence, caused by the boundary conditions and by chiral symmetry breaking, which in turn leads to the breakdown of scale-invariance. Our treatment yields results in agreement with experimental evidence and ongoing research on phthalocyanine iron chains bonded to hydrogen.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Structure and Magnetic Properties of Pseudo-1D Chromium Thiolate Coordination Polymers

The synthesis, structure, and magnetic properties of two novel, pseudo-one-dimensional (1D) chromium thiolate coordination polymers (CPs), CrBTT and Cr2BDT3, are reported. The structures of these materials were determined using X-ray powder diffraction revealing highly symmetric 1D chains embedded within a CP framework. The magnetic coupling of this chain system was measured by SQUID magnetometry, revealing a switch from antiferromagnetic to ferromagnetic behavior dictated by the angular geometrical constraints within the CP scaffold consistent with the Goodenough–Kanamori–Anderson rules. Intrachain magnetic coupling constants J NN of –32.0 and +5.7 K were found for CrBTT and Cr 2 BDT 3 , respectively, using the 1D Bonner–Fisher model of magnetism. The band structure of these materials has also been examined by optical spectroscopy and density functional theory calculations revealing semiconducting behavior. Furthermore, our findings here demonstrate how CP scaffolds can support idealized low-dimensional structural motifs and dictate magnetic interactions through tuning of geometry and inter-spin couplings.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Large exciton binding energy in a bulk van der Waals magnet from quasi-1D electronic localization

Excitons, bound electron-hole pairs, influence the optical properties in strongly interacting solid-state systems and are typically most stable and pronounced in monolayer materials. Bulk systems with large exciton binding energies, on the other hand, are rare and the mechanisms driving their stability are still relatively unexplored. Here, we report an exceptionally large exciton binding energy in single crystals of the bulk van der Waals antiferromagnet CrSBr. Utilizing state-of-the-art angle-resolved photoemission spectroscopy and self-consistent ab-initio GW calculations, we present direct spectroscopic evidence supporting electronic localization and weak dielectric screening as mechanisms contributing to the amplified exciton binding energy. Furthermore, we report that surface doping enables broad tunability of the band gap offering promise for engineering of the optical and electronic properties. Our results indicate that CrSBr is a promising material for the study of the role of anisotropy in strongly interacting bulk systems and for the development of exciton-based optoelectronics.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Protected helical transport in magnetically doped quantum wires: Beyond the one-dimensional paradigm

One-dimensional (1D) quantum wires, which are functionalized by magnetic ad-atoms, can host ballistic helical transport. Helicity protects transport from an undesirable influence of material imperfections and makes the magnetically doped wire very promising elements for nanoelectronics and spintronics. However, fabricating purely 1D conductors is experimentally very challenging and not always feasible. In this paper, we show that the protected helical transport can exist even inquasi-1D wires. We model the quasi-1D magnetically doped wire as two coupled dense 1D Kondo chains. Each chain consists of itinerant electrons interacting with localized quantum magnetic moments - Kondo impurities. We have analyzed the regimes of weak-, intermediate- and strong inter-chain coupling and found conditions necessary for the origin of the aforementioned protected transport. Our results give a push for experimental realizations of the helical states in magnetically doped wires.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1992

Plasma dynamics on current-carrying magnetic flux tubes

A 1D numerical simulation is used to investigate the evolution of a plasma in a current-carrying magnetic flux tube of variable cross section. A large potential difference, parallel to the magnetic field, is applied across the domain. The result is that density minimum tends to deepen, primarily in the cathode end, and the entire potential drop becomes concentrated across the region of density minimum. The evolution of the simulation shows some sensitivity to particle boundary conditions, but the simulations inevitably evolve into a final state with a nearly stationary double layer near the cathode end. The simulation results are at sufficient variance with observations that it appears unlikely that auroral electrons can be explained by a simple process of acceleration through a field-aligned potential drop.

Swift, Daniel W.↗
NASA NTRS2014

MHD Modelling of Coronal Loops: Injection of High-Speed Chromospheric Flows

Context. Observations reveal a correspondence between chromospheric type II spicules and bright upward-moving fronts in the corona observed in the extreme-ultraviolet (EUV) band. However, theoretical considerations suggest that these flows are probably not the main source of heating in coronal magnetic loops. Aims. We investigate the propagation of high-speed chromospheric flows into coronal magnetic flux tubes and the possible production of emission in the EUV band. Methods. We simulated the propagation of a dense 104 K chromospheric jet upward along a coronal loop by means of a 2D cylindrical MHD model that includes gravity, radiative losses, thermal conduction, and magnetic induction. The jet propagates in a complete atmosphere including the chromosphere and a tenuous cool (approximately 0.8 MK) corona, linked through a steep transition region. In our reference model, the jet initial speed is 70 km per second, its initial density is 10(exp 11) per cubic centimeter, and the ambient uniform magnetic field is 10 G. We also explored other values of jet speed and density in 1D and different magnetic field values in 2D, as well as the jet propagation in a hotter (approximately 1.5 MK) background loop. Results. While the initial speed of the jet does not allow it to reach the loop apex, a hot shock-front develops ahead of it and travels to the other extreme of the loop. The shock front compresses the coronal plasma and heats it to about 10(exp 6) K. As a result, a bright moving front becomes visible in the 171 Angstrom channel of the SDO/AIA mission. This result generally applies to all the other explored cases, except for the propagation in the hotter loop. Conclusions. For a cool, low-density initial coronal loop, the post-shock plasma ahead of upward chromospheric flows might explain at least part of the observed correspondence between type II spicules and EUV emission excess.

Sun: chromosphere↗
DOE OSTI2025

Colloidal synthesis of ultrathin KFeS 2 and RbFeS 2 magnetic nanowires with non-van der Waals 1D structures

Design of one-dimensional (1D) nanomaterials based on non-van der Waals (non-vdW) 1D chain structures is emerging as a new materials frontier, owing to their strong intrinsic anisotropy and broad compositional diversity. However, achieving ultrathin 1D morphology in such systems remains a significant challenge. In this work, we report the colloidal synthesis of ultrathin KFeS 2 and RbFeS 2 nanowires—representing the first fabrication of ultrathin 1D nanomaterials driven by non-vdW 1D crystal structures. The nanowires exhibit diameters of ∼5 nm and lengths of microns, with anisotropic growth directed by covalent [FeS 2 ] − chains. Magnetic characterization reveals significantly reduced antiferromagnetic transition temperatures and suppressed interchain ferromagnetic interactions, demonstrating pronounced size and morphology effects. Control experiments on structurally related materials indicate that direct nucleation of the 1D phase is essential for achieving the nanowire morphology. These findings establish a new synthetic pathway to an understudied family of non-vdW 1D nanomaterials, enabling exploration of their emergent quantum and magnetic properties.

Sun, Zhaohong [University of Southern California, ↗