SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Three dimensional radiative transfer theory was applied to computation of atmospheric effects on remotely sensed imagery. The atmospheric correction algorithm derived is used to estimate aerosol opacity.
Using a newly designed cellular radiation code, incorporating wavelength-dependent absorption,.
The main causes and magnitude of the atmospheric effects on remote sensing of the Earth's surface are determined. Theoretical study as well as measurements are included. The knowledge gained from this study will be used to develop atmospheric correction algorithms and to test them with satellite data. In a theoretical investigation of the relative effects of the aerosol optical thickness, absorption, and size distribution on remote sensing, it was found that aerosol absorption has a significant effect on satellite measurements of surface reflectivity. The absorption effect is stronger for high than for low surface reflectances. The aerosol optical thickness is dominant for small surface reflectances. The accuracy of clustering algorithms depends on both parameters. The vegetation index, however, is affected by the optical thickness but only weakly affected by the absorption. A laboratory simulation of the atmospheric effect on the radiance of sunlight scattered from the Earth's surface-atmosphere system was performed. This experiment verified the existence of the adjacency effect (the effect of a bright field on the radiance detected above a dark field) and was used to test 3-D radiative transfer models. In a theoretical study it was found that atmospheric scattering resulting from the adjacency effect reduces the separability between surface classes.
A general mathematical framework for simulating processes in heterogeneous 3-D scenes is presented. Specifically, a model was designed and coded for application to radiative transfers in vegetative scenes. The model is unique in that it predicts (1) the directional spectral reflectance factors as a function of the sensor's azimuth and zenith angles and the sensor's position above the canopy, (2) the spectral absorption as a function of location within the scene, and (3) the directional spectral radiance as a function of the sensor's location within the scene. The model was shown to follow known physical principles of radiative transfer. Initial verification of the model as applied to a soybean row crop showed that the simulated directional reflectance data corresponded relatively well in gross trends to the measured data. However, the model can be greatly improved by incorporating more sophisticated and realistic anisotropic scattering algorithms
The IUE data base is used to analyze the UV line shapes of cataclysmic variables RW Sex, RW Tri, and V Sge. Observed lines are compared to synthetic line profiles computed using a model of rotating bi-conical winds from accretion disks. The wind model calculates the wind ionization structure self-consistently including photoionization from the disk and boundary layer and treats 3-D line radiation transfer in the Sobolev approximation. It is found that winds from accretion disks provide a good fit for reasonable parameters to the observed UV lines which include the P Cygni profiles for low inclination systems and pure emission at large inclination. Disk winds are preferable to spherical winds which originate on the white dwarf because they (1) require a much lower ratio of mass loss rate to accretion rate and are therefore more plausible energetically, (2) provide a natural source for a bi-conical distribution of mass outflow which produces strong scattering far above the disk leading to P Cygni profiles for low inclination systems, and pure line emission profiles at high inclination with the absence of eclipses in UV lines, and (3) produce rotation broadened pure emission lines at high inclination.
Aircraft and ground-based radar data from the Tropical Ocean and Global Atmosphere Coupled-Ocean Atmosphere Response Experiment (TOGA COARE) show that convective systems are not always vertical. Instead, many are tilted from vertical. Satellite passive microwave radiometers observe the atmosphere at a viewing angle. For example, the Special Sensor Microwave/Imager (SSM/I) on Defense Meteorological Satellite Program (DMSP) satellites and the Tropical Rainfall Measurement Mission (TRMM) Microwave Imager (TMI) on the TRMM satellite have an incident angle of about 50deg. Thus, the brightness temperature measured from one direction of tilt may be different than that viewed from the opposite direction due to the different optical depth. This paper presents the investigation of passive microwave brightness temperatures of tilted convective systems. To account for the effect of tilt, a 3-D backward Monte Carlo radiative transfer model has been applied to a simple tilted cloud model and a dynamically evolving cloud model to derive the brightness temperature. The radiative transfer results indicate that brightness temperature varies when the viewing angle changes because of the different optical depth. The tilt increases the displacements between high 19 GHz brightness temperature (Tb(sub 19)) due to liquid emission from lower level of cloud and the low 85 GHz brightness temperature (Tb(sub 85)) due to ice scattering from upper level of cloud. As the resolution degrades, the difference of brightness temperature due to the change of viewing angle decreases dramatically. The dislocation between Tb(sub 19) and Tb(sub 85), however, remains prominent.
This paper describes briefly two rather specialized computer programs which solve for steady-state temperatures over a sphere. The first program deals with opaque surfaces and allows for skin conduction and black body internal radiation. This program differs from the conventional 3-D heat transfer programs in that it automatically subdivides the sphere into a specified number of nodes and computes for each node, surface area, conductances, radiation shape factors and incident solar flux. The second program allows for transmission through partially or fully transparent external surfaces and accounts for multiple diffuse reflections at the inner surfaces, but does not include conduction.
Practical methods for remote sensing when scene complexity and atmospheric effects modify intrinsic reflective properties are developed. The radiation history from ground to space of light reflected from individual leaves is initially multiply scattered within the crop canopy, whose geometry provides a controlling influence, then scattered and attenuated as a result of transmission through the Earth's atmosphere. The experimental and theoretical tools for studying these effects quantitatively are under development. A new radiative transfer code which uses Fourier transforms to solve the 3-D equation of transfer was developed. The initial version permits inhomogeneous non-Lambertian surfaces but assumes horizontal uniformity for the atmosphere. The computational results are in excellent agreement with Monte Carlo calculations. Laboratory apparatus to study the variation of spectral reflectance of individual leaves as a function of illumination incidence angle and reflection angle was used. These data can then be used in models to determine canopy scattering effects. Stress tests by observing leaf reflectance at 0.9 microns as a function of time following clipping from the stem was performed. A reflectance increase due to loss of water has been observed.
An analytical program was conducted to compute the soot and NOx emissions from a combustor and the radiation heat transfer to the combustor walls. The program involved the formulation of an emission and radiation model and the incorporation of this model into the Garrett 3-D Combustor Perfomance Computer Program. Computations were performed for the idle, cruise, and take-off conditions of a JT8D can combustor. The predicted soot and NOx emissions and the radiation heat transfer to the combustor walls agree reasonably well with the limited experimental data available.
The relationship between the rain rate and the brightness temperature (Tb) was investigated using a cloud model/microwave radiative transfer model combination to obtain the rain-rate/Tb relations for four different frequencies: 10, 19, 37, and 86 GHz. The results at 19, 37, and 86 GHz were found to be significantly affected by ice in the modeled convective system, while the results at 10 GHz showed very little effect. Nonprecipitating cloud water was found to affect Tb in two ways. First, at low rain rates, the presence of significant cloud water produced higher Tb values than in cases with little cloud water. The second effects occurs at 19, 37, and 86 GHz at higher rainrates associated with significant ice formation; the scattering by ice lowered the Tb.
A 3D cloud model is used to simulate the storm structure, and the results are linked to microwave and infrared radiative transfer models for simulation of aircraft observations. Spaceborne radar data are also simulated along the aircraft flight track. The cloud and radiative model simulations are studied and compared with aircraft observations. The initial results indicate that the 3D cloud model is capable of simulating the major features of observed storm systems when given a representative atmospheric sounding to initialize the convective systems. The simulations of infrared and microwave radiances provide reasonably good comparisons with the observations.
Ionizing radiation environment models, a 3-D spacecraft mass model, and radiation transport codes have been used to predict the radiation dose and linear energy transfer (LET) spectra measured at various locations on the LDEF satellite. The predictions are compared with thermoluminescent dosimeter measurements of the trapped proton and electron doses and with LET spectra measured by plastic nuclear track detectors. The predicted vs observed comparisons indicate some of the uncertainties of present ionizing radiation environment models for low Earth-orbit missions.
A general 3-D combustor performance program developed by Garrett was extended to predict soot and NOx emissions. The soot formation and oxidation rates were computed by quasi-global models, taking into account the influence of turbulence. Radiation heat transfer was computed by the six-flux radiation mode. The radiation properties include the influence of CO2 and H2O in addition to soot. NOx emissions were computed from a global four-step hydrocarbon oxidation scheme and a set of rate-controlled reactions involving radicals and nitrogen oxides.
A computational methodology is developed for the calculation of radiation heat transfer in a non-scattering medium where nonequilibrium conditions exist and give rise to complex spectra. The specific problem of radiation in an aeroassisted orbital transfer vehicle (AOTV) flowfield is addressed. Nonequilibrium radiation from the gases around a hypersonic vehicle is evaluated using the NASA-Ames NEQAIR program together with a three-dimensional geometrical flowfield model. Nonequilibrium compositions and temperatures are taken from NASA-Langley 3-D hypersonic flowfield calculations that include real-gas effects and finite-rate chemical kinetics. It is shown that the concept of a transmission path adjustment, together with precomputations of curves of growth based upon local properties at flowfield locations, facilitates radiation calculations. Sample calculations of directional and spectral distributions of gas radiation received upon a hypersonic vehicle are presented.
In microwave radiative transfer model simulations, the Mie calculations usually consume the majority of the computer time necessary for the calculations (70 to 86 percent for frequencies ranging from 6.6 to 183 GHz). For a large array of atmospheric profiles, the repeated calculations of the Mie codes make the radiative transfer computations not only expensive, but sometimes impossible. It is desirable, therefore, to develop a set of Mie tables to replace the Mie codes for the designated ranges of temperature and frequency in the microwave radiative transfer calculation. Results of using the Mie tables in the transfer calculations show that the total CPU time (IBM 3081) used for the modeling simulation is reduced by a factor of 7 to 16, depending on the frequency. The tables are tested by computing the upwelling radiance of 144 atmospheric profiles generated by a 3-D cloud model (Tao, 1986). Results are compared with those using Mie quantities computed from the Mie codes. The bias and root-mean-square deviation (RMSD) of the model results using the Mie tables, in general, are less than 1 K except for 37 and 90 GHz. Overall, neither the bias nor RMSD is worse than 1.7 K for any frequency and any viewing angle.
Radiation dosimetry aboard LDEF, as well as post-flight measurements of the radioactivity induced in numerous LDEF spacecraft components, provide unique data for evaluating the accuracy of current models for predicting both the space radiation environments (trapped proton intensity, spectra, and directionality; cosmic ray fluence) and the radiation environments induced in spacecraft components (fluence, energy spectra, secondary particle, linear energy transfer, etc.). By determining the accuracy of such models using LDEF data, and with model updates where required, improved radiation environment predictions can be made for future missions, which in turn allows improved predictions for specific radiation effects for future spacecraft components (single event upsets of microelectronics, radiation damage to focal plane arrays, noise in sensitive instrumentation, etc.). Herein, the status and results from radiation model predictions and comparisons with LDEF data is given. The calculations are made using radiation transport codes coupled with a 3-D geometry/mass model of LDEF, together with current models of the space radiation environment.
The LANDSAT Thematic Mapper (TM) scanner records reflected solar energy from the earth's surface in six wavelength regions, or bands, and one band that records emitted energy in the thermal region, giving a total of seven bands. Useful research was extracted about terrain morphometry from remote sensing measurements and this information is used in an image-based terrain model for selected coastal geomorphic features in the Great Salt Lake Desert (GSLD). Technical developments include the incorporation of Aerial Profiling of Terrain System (APTS) data in satellite image analysis, and the production and use of 3-D surface plots of TM reflectance data. Also included in the technical developments is the analysis of the ground control point spatial distribution and its affects on geometric correction, and the terrain mapping procedure; using satellite data in a way that eliminates the need to degrade the data by resampling. The most common approach for terrain mapping with multispectral scanner data includes the techniques of pattern recognition and image classification, as opposed to direct measurement of radiance for identification of terrain features. The research approach in this investigation was based on an understanding of the characteristics of reflected light resulting from the variations in moisture and geometry related to terrain as described by the physical laws of radiative transfer. The image-based terrain model provides quantitative information about the terrain morphometry based on the physical relationship between TM data, the physical character of the GSLD, and the APTS measurements.
The reflected flux from a regular array of 2- and 3-D clouds has been computed to estimate the effect of fractional cloud cover on albedos and the solar flux available to heat the earth's surface. The broken clouds are represented by a regular array of identical cuboids for the 3-D problem and equally spaced, infinitely long, bars for the 2-D problem. A diffusion approximation to the radiative transfer equation is used to compute the fluxes leaving each face of the cloud. Interaction between clouds is simulated by assuming diffuse exitance from the cloud faces and applying angle factors to obtain modified boundary conditions on each cloud face.