Search NASA⌕ Search

SEARCH · Search NASA

Results for “73 - NUCLEAR PHYSICS AND RADIATION PHYSICS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

SEARCHING FOR X-RAY VARIABILITY IN THE GLITCHING ANOMALOUS X-RAY PULSAR 1E 1841-045 IN KES 73

Anomalous X-ray pulsars (AXPs) are now established to exhibit significant X-ray variability and be prolific glitchers, with some glitches being accompanied by large radiative changes. An open issue is whether AXP glitches are generically accompanied by radiative changes, relevant for understanding magnetar physical properties. Here we report on an analysis of archival X-ray data from the AXP 1E 1841-045, obtained between 1993 and 2007. This AXP, located in the center of the supernova remnant Kes 73, has exhibited three glitches between 2002 and 2007, as determined by RXTE monitoring since 1999. We have searched for evidence of phase-averaged flux variability that could be present if glitches in AXPs are usually accompanied by radiative changes. We find no evidence for glitch-correlated flux changes from this source after 1999, supporting the existence of radiatively silent glitches in AXPs.

79 ASTRONOMY AND ASTROPHYSICS↗

Synchrotron-Radiation-Based Moessbauer Spectroscopy

We have developed a new method that yields Moessbauer absorption spectra using synchrotron radiation (SR); this method is applicable for almost all Moessbauer nuclides including those that cannot be measured by previous methods using radioisotope (RI) sources. The Moessbauer spectrum of the 68.752 keV excited state of {sup 73}Ge, which cannot be measured using a RI source, was measured using SR. Our results show that this method can be used to perform advanced Moessbauer spectroscopy measurements owing to the excellent features of SR.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

LLNL FY2022 Aging and Lifetimes Exit Criteria: Milestone 8118, GC#3

Adhesives and adhesive-bond joints play a critical role in many applications across the national security enterprise. They are ubiquitous and their aging performance can impact the physical and chemical behavior of complex systems. Previously, we have explored the chemical aging behavior of polyurethane adhesives (Halthane 73-18, Halthane 88-3, and Wilethane 44) exposed to varying levels of radiation and identified the primary chemical degradation products. In this work, we expand upon our analysis to understand how the mechanical properties of adhesives-bonded joints behave after radiation exposure.

36 MATERIALS SCIENCE↗

THE FAR-INFRARED ROTATIONAL SPECTRUM OF ETHYLENE OXIDE

High-resolution FTIR spectra of ethylene oxide have been measured in the far-infrared region using synchrotron radiation. A total of 1182 lines between 15 and 73 cm{sup -1} were assigned, with J{sub max} = 64, expanding upon previous studies that had recorded spectra up to 12 cm{sup -1}, J{sub max} = 49. All available data were co-fitted to provide greatly imp- roved rotational constants for the ground vibrational state that are capable of predicting transitions up to 73 cm{sup -1}.

74 ATOMIC AND MOLECULAR PHYSICS↗

Effect of the Laser Scan Rate on the Microstructure, Magnetic Properties, and Microhardness of Selective Laser-Melted FeSiB

FeSiB alloys have been fabricated by selective laser melting (SLM) using a laser scan rate of 0.1–1.5 m/s, laser power of 90 W, scan line spacing of 40 μ m, and layer thickness of 50 μ m. X-ray diffraction, scanning electron microscopy coupled with energy-dispersive X-ray spectroscopy, atomic force microscopy, profilometer, microdurometer, and vibrating sample magnetometer have been used to investigate the structural, microstructural, roughness, microhardness, and magnetic property changes during the laser melting process. The produced samples exhibit a nanocomposite structure consisting of nanocrystalline α-Fe{sub 0.95}Si{sub 0.05} and Fe{sub 2}B phases embedded into an amorphous ε-FeSi-type matrix. The selective laser-melted samples show high density, low surface roughness, higher microhardness values (1654–2273 Hv), and soft magnetic properties (M{sub s} = 188.6–199 emu/g and H{sub c} = 43.8–73 Oe).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Atomic-scale characterization of germanium isotopic multilayers by atom probe tomography

We report comparison of the interfacial sharpness characterization of germanium (Ge) isotopic multilayers between laser-assisted atom probe tomography (APT) and secondary ion mass spectrometry (SIMS). An alternating stack of 8-nm-thick naturally available Ge layers and 8-nm-thick isotopically enriched {sup 70}Ge layers was prepared on a Ge(100) substrate by molecular beam epitaxy. The APT mass spectra consist of clearly resolved peaks of five stable Ge isotopes ({sup 70}Ge, {sup 72}Ge, {sup 73}Ge, {sup 74}Ge, and {sup 76}Ge). The degree of intermixing at the interfaces between adjacent layers was determined by APT to be around 0.8 {+-} 0.1 nm which was much sharper than that obtained by SIMS.

36 MATERIALS SCIENCE↗

Microspectroscopy At Beamline 73 MAX-lab

Presentation of some projects at the infrared microspectroscopy experimental station at beamline 73 MAX-lab. Among the subjects are found identification of organic residues in fossil material and examination of the chemistry in an old oak wood wreck.

43 PARTICLE ACCELERATORS↗

WE-H-BRC-09: Simulated Errors in Mock Radiotherapy Plans to Quantify the Effectiveness of the Physics Plan Review

Purpose: A standard tool for ensuring the quality of radiation therapy treatments is the initial physics plan review. However, little is known about its performance in practice. The goal of this study is to measure the effectiveness of physics plan review by introducing simulated errors into “mock” treatment plans and measuring the performance of plan review by physicists. Methods: We generated six mock treatment plans containing multiple errors. These errors were based on incident learning system data both within the department and internationally (SAFRON). These errors were scored for severity and frequency. Those with the highest scores were included in the simulations (13 errors total). Observer bias was minimized using a multiple co-correlated distractor approach. Eight physicists reviewed these plans for errors, with each physicist reviewing, on average, 3/6 plans. The confidence interval for the proportion of errors detected was computed using the Wilson score interval. Results: Simulated errors were detected in 65% of reviews [51–75%] (95% confidence interval [CI] in brackets). The following error scenarios had the highest detection rates: incorrect isocenter in DRRs/CBCT (91% [73–98%]) and a planned dose different from the prescribed dose (100% [61–100%]). Errors with low detection rates involved incorrect field parameters in record and verify system (38%, [18–61%]) and incorrect isocenter localization in planning system (29% [8–64%]). Though pre-treatment QA failure was reliably identified (100%), less than 20% of participants reported the error that caused the failure. Conclusion: This is one of the first quantitative studies of error detection. Although physics plan review is a key safety measure and can identify some errors with high fidelity, others errors are more challenging to detect. This data will guide future work on standardization and automation. Creating new checks or improving existing ones (i.e., via automation) will help in detecting those errors with low detection rates.

60 APPLIED LIFE SCIENCES↗

Precision measurement of the mass and width of the W boson at CDF

A precision measurement of the mass and width of the W boson is presented. The W bosons are produced in proton antiproton collisions occurring at a centre of mass energy of 1.96 TeV at the Tevatron accelerator. The data used for the analyses is collected by the Collider Detector at Fermilab (CDF) and corresponds to an average integrated luminosity of 350 pb -1 for the W width analysis for the electron and muon channels and an average integrated luminosity of 2350 pb -1 for the W mass analysis. The mass and width of the W boson is extracted by fitting to the transverse mass distribution, with the peak of the distribution being most sensitive to the mass and the tail of the distribution sensitive to the width. The W width measurement in the electron and muon channels is combined to give a final result of 2032 ± 73 MeV. The systematic uncertainty on the W mass from the recoil of the W boson against the initial state gluon radiation is discussed. A systematic study of the recoil in Z → e + e - events where one electron is reconstructed in the central calorimeter and the other in the plug calorimeter and its effect on the W mass is presented for the first time in this thesis.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Photoelectric effects of ultraviolet fast response and high sensitivity in LiNbO{sub 3} single crystal

The photoelectric effects in LiNbO{sub 3} (LNO) single crystal have been systematically studied with the two kinds of LNO wafers of tilt of 10 deg. and untilted at the ambient temperature. The ultrafast response photoelectric effect of 120 ps rise time was observed in 10 deg. tilted LNO single crystal with a 266 nm laser pulse of 25 ps duration. The photocurrent responsivity of untilted LNO with an interdigitated electrode of 10 mum finger width and 10 mum interspacing is 17.1 mA/W under the irradiation of 300 nm wavelength UV light at 10 V bias. The noise current under sunlight is only 73 pA at 10 V bias. The experimental results suggest that the LNO single crystal is one of the promising materials for photodetectors working in UV region.

36 MATERIALS SCIENCE↗

Generation of an XUV supercontinuum by optimization of the angle between polarization planes of two linearly polarized pulses in a multicycle two-color laser field

We theoretically investigate the high-order harmonic generation (HHG) in helium using a two-color laser field synthesized by an intense 25-fs laser pulse at 800 nm and a relatively weak {approx}43-fs laser pulse at 1400 nm. When the polarization between the two pulses is arranged at an angle of {approx}73 deg., supercontinuum spectra are dramatically broadened to 180 eV, which is sufficient to support an isolated {approx}73-as pulse without any phase compensation. The physical mechanisms behind the phenomenon are well explained in terms of quantum and classical analyses. Furthermore, in the long-pulse regime, this method of extending the supercontinuum spectrum shows the significant advantage over previous two-color HHG schemes.

74 ATOMIC AND MOLECULAR PHYSICS↗

Cavity control of a single-electron quantum cyclotron: Measuring the electron magnetic moment

Measurements with a one-electron quantum cyclotron determine the electron magnetic moment, given by g/2=1.001 159 652 180 73(28)[0.28ppt], and the fine structure constant, {alpha}{sup -1}=137.035 999 084(51)[0.37ppb]. Announcements of these measurements [Phys. Rev. Lett. 97, 030801 (2006); 100, 120801 (2008)] are supplemented here with a more complete description of the one-electron quantum cyclotron and the measurement methods, a discussion of the cavity control of the radiation field, a summary of the analysis of the measurements, and a fuller discussion of the uncertainties.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Improvement of electrical and optical properties of molybdenum oxide thin films by ultralow pressure sputtering method

In this work, we investigated the structural, electrical and optical properties of molybdenum oxide thin films deposited by the reactive dc magnetron sputtering method. The molybdenum oxide films were prepared at sputtering pressures ranging from 6.7 x 10{sup -1} to 6.7 x 10{sup -2} Pa. In order to promote their electrical conductivity, all the deposited MoO{sub x} films were annealed in Ar ambient at 450 deg. C for 8 h. The resistivity of the MoO{sub x} films varied from 10{sup -4} to 10{sup -2}{Omega} cm depending on the O{sub 2} content in the sputtering ambient. The lowering of the resistivity of the MoO{sub 2} films was mainly attributed to the formation of a monoclinic MoO{sub 2} polycrystalline phase. As the sputtering pressure decreased, the content of monoclinic polycrystalline MoO{sub 2} phase increased, resulting in low resistivity films. The formation of the dominant MoO{sub 2} phase at lower sputtering pressures was attributed to the stress induced crystallization. The post-deposition annealed (PDA) MoO{sub x} film, deposited at an ultralow sputtering pressure (6.7 x 10{sup -2} Pa) and O{sub 2} content of 40%, had an atomic ratio of O to Mo {approx_equal} 2.85 and was highly transparent and conductive: the transmittance in the visible wavelength range of 400-500 nm was about 73% and the resistivity was 1.05 x 10{sup -3}{Omega} cm. This result is superior to those of MoO{sub x} films epitaxially grown by the pulse laser deposition method.

36 MATERIALS SCIENCE↗

Double ionization of He in an intense laser field via a rescattering process

We investigate the ratio of double to single ionization of He in an intense laser field based on the rescattering model. Folding the rescattering energy spectra with the electron impact inelastic cross sections, we obtain the probability of double ionization due to the nonsequential ionization process. Our results are in reasonable agreement with the experiment [Walker et al., Phys. Rev. Lett. 73, 1227 (1994)]. Furthermore, we investigate the physical insights of the nonsequential double ionization by analyzing the rescattering energy spectra at different intensities and the contributions from individual returns. This study confirms the reliability of the rescattering energy spectra obtained from ab initio calculations. The rescattering information can be used to analyze many other dynamical processes in intense laser-matter interactions, such as molecular imaging.

74 ATOMIC AND MOLECULAR PHYSICS↗

Formation of less-known structurally complex ζ{sub b} and orthorhombic quasicrystalline approximant ε{sub n} on solidification of selected Al–Pd–Cr alloys

The evolution of phases was investigated on cooling of Al{sub 71}Pd{sub 24}Cr{sub 5}, Al{sub 73}Pd{sub 20}Cr{sub 7}, and Al{sub 73}Pd{sub 23}Cr{sub 4} alloys from 1350 °C down to ambient temperature with the rate of 10 °C·min{sup −1}. To perform the investigation, differential thermal analysis, synchrotron X-ray powder diffraction, and scanning electron microscopy coupled with energy-dispersive X-ray spectroscopy were used. In all the investigated alloys structurally complex phases ε{sub n} (ε{sub 6} + ε{sub 28}) and ζ{sub b}, as well as the δ-phase were identified. Based on the results of differential thermal analysis, sequences of phase transformations were determined. The Al{sub 71}Pd{sub 24}Cr{sub 5} alloy started to solidify at 1031.4 °C through β. Primary dendrites of ζ{sub b} were observed in Al{sub 73}Pd{sub 20}Cr{sub 7} and Al{sub 73}Pd{sub 23}Cr{sub 4} alloys. In the second step of solidification δ and/or ζ{sub b} were formed. The peritectic reaction, liquid + ζ{sub b} + δ → ε{sub n} + ζ{sub b} + δ, leading to the formation of the quasicrystalline approximant ε{sub n} (ε{sub 6} + ε{sub 28}) took place in the final step of solidification at approximately 792 °C. - Highlights: • Structurally complex ε{sub n} (ε{sub 6} + ε{sub 28}), ζ{sub b} and δ-phases were identified. • The Al{sub 71}Pd{sub 24}Cr{sub 5} alloy started to solidify at 1031.4 °C through the primary β phase. • The Al{sub 73}Pd{sub 20}Cr{sub 7} and Al{sub 73}Pd{sub 23}Cr{sub 4} alloys solidified in the same way. • The quasicrystalline approximant ε{sub n} (ε{sub 6} + ε{sub 28}) was formed at approximately 792 °C.

36 MATERIALS SCIENCE↗

$Ξ$ 𝑐 → $Ξ$ form factors from lattice QCD with domain-wall quarks: A new piece in the puzzle of $Ξ^0_𝑐$ decay rates

We present a lattice quantum chromodynamics (QCD) determination of the vector and axial-vector form factors that describe the charm-baryon semileptonic decays Ξ 𝑐 → Ξ⁢ℓ + ⁢𝜈 ℓ . The calculation uses a domain-wall action for the up, down, and strange quarks, and an anisotropic clover action for the charm quark. We use four ensembles of gauge-field configurations generated by the RBC and UKQCD collaborations, with lattice spacings between 0.111 and 0.073 fm and pion masses ranging from 420 to 230 MeV. We present Standard Model predictions for the decay rates and branching fractions of Ξ$^0_𝑐$ → Ξ$^−_𝑐$⁢ℓ + ⁢𝜈 ℓ and Ξ$^+_𝑐$ → Ξ$^0_𝑐$⁢ℓ + ⁢𝜈 ℓ for ℓ =𝑒, 𝜇. In particular, we obtain Γ⁡(Ξ$^0_𝑐$ → Ξ − ⁢𝑒 + ⁢𝜈 𝑒 )/|𝑉 𝑐⁢𝑠 | 2 = 0.2515⁢(73) ps −1 and ℬ⁡(Ξ$^0_𝑐$ → Ξ − ⁢𝑒 +⁢ 𝜈 𝑒 ) = 3.58⁢(12)%. These values are higher than those predicted by a previous lattice calculation and substantially higher than the experimentally measured values, but consistent with expectations from approximate 𝑆⁢𝑈⁡(3) flavor symmetry.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Radiative recombination rate coefficients for highly-charged tungsten ions

Partial and total radiative recombination rate coefficients are presented for highly-charged ions of tungsten with closed shells, W{sup 28+}, W{sup 38+}, W{sup 46+}, W{sup 56+}, W{sup 64+}, W{sup 70+}, and W{sup 72+}, as well as for the H-like ion W{sup 73+} and the bare nucleus W{sup 74+}. The temperature range 10{sup 3}-10{sup 10}K is considered. Calculations have been performed in the framework of the fully relativistic Dirac-Fock treatment of photoionization and radiative recombination processes taking into account all significant multipoles of the radiation field. We assess the influence of multipole effects on recombination rate coefficients as compared with the commonly used dipole approximation. For the first time, we show that the relativistic Maxwell-Boltzmann distribution of continuum electrons should be used at high temperature. This decreases the rate coefficient significantly compared to the nonrelativistic distribution.

74 ATOMIC AND MOLECULAR PHYSICS↗