SEARCH · Search NASA

Results for “915-MHz Radar Wind Profiler”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

All sources NASA NTRS DOE OSTI

DOE OSTI2026

WINDPROF: Merged Best-Estimate Wind Profile Data – Nantucket (WFIP3 Campaign)

WINDPROF provides 10-minute wind and turbulence profiles that integrate scanning Doppler lidars, a profiling lidar, a 915 MHz radar wind profiler, and a sonic anemometer across Northeast U.S. coastal and offshore sites during the WFIP3 campaign. Variables include wind speed, wind direction, vertical velocity, turbulence intensity, and turbulent kinetic energy, each with per-instrument quality control and inter-instrument agreement validation. Profiles are mapped to a standardized height grid – a dedicated near-surface level at the sonic measurement height (5 m AGL), 20 m spacing to 100 m, and 30 m spacing above – and carry component and derived uncertainty estimates. Heights are reported above ground level; the site's ground elevation is stored separately. The Nantucket dataset covers 1 February 2024 – 8 September 2025.

17 WIND ENERGY↗

DOE OSTI2026

WINDPROF: Merged Best-Estimate Wind Profile Data – Block Island (WFIP3 Campaign)

WINDPROF provides 10-minute wind and turbulence profiles that integrate a scanning Doppler lidar, a profiling lidar, a 915 MHz radar wind profiler, and a surface met station across Northeast U.S. coastal and offshore sites during the WFIP3 campaign. Variables include wind speed, wind direction, vertical velocity, turbulence intensity, and turbulent kinetic energy, each with per-instrument quality control and inter-instrument agreement validation. Profiles are mapped to a standardized height grid – a dedicated near-surface level at the 10 m surface-wind height, 20 m spacing to 100 m, and 30 m spacing above – and carry component and derived uncertainty estimates. Heights are reported above ground level; the site's ground elevation is stored separately. The Block Island dataset covers 1 February 2024 – 8 September 2025.

17 WIND ENERGY↗

DOE OSTI2024

Advanced Precipitation and Boundary Layer Data Products Derived from ARM Radar Wind Profilers

This research project was successful in delivering on four main objectives. First, software was developed to accurately calculate 915-MHz radar wind profiler (RWP) spectrum moments from the recorded Doppler velocity power spectra. Second, software was developed to calibrate the RWP reflectivity factor using collocated surface disdrometer observations. Third, the Python processing code was documented and given to the ARM Infrastructure to produce ARM ‘b level’ calibrated RWP products. Fourth, calibrated RWP products were uploaded to the ARM Archive as PI Products for 10 years of SGP RWP observations and for GoAmazon and TRACER field campaign RWP observations. In addition to working with RWP observations, this research project also worked with KAZR observations to distinguish insects from boundary layer clouds to help improve the ARSCL cloud mask product. The PI worked with senior and early career ARM funded scientists at BNL exploring how to include calibrated RWP moments into future versions of the ARSCL product.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2025

rwpvertvel

The 915-Mhz Radar Wind Profiler (RWP) has been configured to point vertically and operate in precipitation mode so as to measure Doppler velocity in the vertical direction, tracking the motion of hydrometeors as they fall, and enabling the calculation of vertical air motion within clouds.

54 ENVIRONMENTAL SCIENCES↗

NASA NTRS2013

Integrating Wind Profiling Radars and Radiosonde Observations with Model Point Data to Develop a Decision Support Tool to Assess Upper-Level Winds for Space Launch

On the day-of-launch, the 45th Weather Squadron (45 WS) Launch Weather Officers (LWOs) monitor the upper-level winds for their launch customers to include NASA's Launch Services Program and NASA's Ground Systems Development and Operations Program. They currently do not have the capability to display and overlay profiles of upper-level observations and numerical weather prediction model forecasts. The LWOs requested the Applied Meteorology Unit (AMU) develop a tool in the form of a graphical user interface (GUI) that will allow them to plot upper-level wind speed and direction observations from the Kennedy Space Center (KSC) 50 MHz tropospheric wind profiling radar, KSC Shuttle Landing Facility 915 MHz boundary layer wind profiling radar and Cape Canaveral Air Force Station (CCAFS) Automated Meteorological Processing System (AMPS) radiosondes, and then overlay forecast wind profiles from the model point data including the North American Mesoscale (NAM) model, Rapid Refresh (RAP) model and Global Forecast System (GFS) model to assess the performance of these models. The AMU developed an Excel-based tool that provides an objective method for the LWOs to compare the model-forecast upper-level winds to the KSC wind profiling radars and CCAFS AMPS observations to assess the model potential to accurately forecast changes in the upperlevel profile through the launch count. The AMU wrote Excel Visual Basic for Applications (VBA) scripts to automatically retrieve model point data for CCAFS (XMR) from the Iowa State University Archive Data Server (http://mtarchive.qeol.iastate.edu) and the 50 MHz, 915 MHz and AMPS observations from the NASA/KSC Spaceport Weather Data Archive web site (http://trmm.ksc.nasa.gov). The AMU then developed code in Excel VBA to automatically ingest and format the observations and model point data in Excel to ready the data for generating Excel charts for the LWO's. The resulting charts allow the LWOs to independently initialize the three models 0-hour forecasts against the observations to determine which is the best performing model and then overlay the model forecasts on time-matched observations during the launch countdown to further assess the model performance and forecasts. This paper will demonstrate integration of observed and predicted atmospheric conditions into a decision support tool and demonstrate how the GUI is implemented in operations.

Bauman, William H., III↗

NASA NTRS1998

Data Quality Assessment Methods for the Eastern Range 915 MHz Wind Profiler Network

The Eastern Range installed a network of five 915 MHz Doppler Radar Wind Profilers with Radio Acoustic Sounding Systems in the Cape Canaveral Air Station/Kennedy Space Center area to provide three-dimensional wind speed and direction and virtual temperature estimates in the boundary layer. The Applied Meteorology Unit, staffed by ENSCO, Inc., was tasked by the 45th Weather Squadron, the Spaceflight Meteorology Group, and the National Weather Service in Melbourne, Florida to investigate methods which will help forecasters assess profiler network data quality when developing forecasts and warnings for critical ground, launch and landing operations. Four routines were evaluated in this study: a consensus time period check a precipitation contamination check, a median filter, and the Weber-Wuertz (WW) algorithm. No routine was able to effectively flag suspect data when used by itself. Therefore, the routines were used in different combinations. An evaluation of all possible combinations revealed two that provided the best results. The precipitation contamination and consensus time routines were used in both combinations. The median filter or WW was used as the final routine in the combinations to flag all other suspect data points.

Lambert, Winifred C.↗

NASA NTRS2006

Using a Network of Boundary Layer Profilers to Characterize the Atmosphere at a Major Spaceport

Space launch, landing, and ground operations at the Kennedy Space Center (KSC) and Cape Canaveral Air Force Station (CCAFS) in east-central Florida are highly sensitive to mesoscale weather conditions throughout the year. Due to the complex land-water interfaces and the important role of mesoscale circulations, a high-resolution network of five 915-MHz Doppler Radar Wind Profilers (DRWP) and 44 wind towers was installed over the KSC/CCAFS area. By using quality-controlled 915-MHz DRAT data along with the near-surface tower observations, the Applied Meteorology Unit and KSC Weather Office have studied the development and evolution of various mesoscale phenomena across KSC/CCAFS such as sea and land breezes, low-level jets, and frontal passages. This paper will present some examples of mesoscale phenomena that can impact space operations at KSC/CCAFS, focusing on the utility of the 915-MHz DRWP network in identifying important characteristics of sea/land breezes and low-level jets.

Case, Jonathan L.↗

DOE OSTI2025

NANT Site - NOAA Radar Wind Profiler / Raw Data

This dataset contains data from a NOAA Radar Wind Profiler located on Nantucket island. Data can be found at https://psl.noaa.gov/data/obs/datadisplay/ with the following filters: Active Sites: nte Instrument: 915 MHz Wind Profiler Product: Radar 915MHz Sub-Hourly Weber Wuertz Wind

17 WIND ENERGY↗

DOE OSTI2025

Radar Wind Profiler / Raw Data

This dataset contains data from a NOAA Radar Wind Profiler located on Block island. Data can be found at https://psl.noaa.gov/data/obs/datadisplay/ with the following filters: Active Sites: bid Instrument: 915 MHz Wind Profiler Product: Radar 915MHz Sub-Hourly Weber Wuertz Wind

17 WIND ENERGY↗

NASA NTRS2005

Rapid Temporal Changes of Boundary Layer Winds

The statistical distribution of the magnitude of the vector wind change over 0.25, 0.5, 1 and 2-h periods based on data from November 1999 through August 2001 is presented. The distributions of the 2-h u and v component wind changes are also presented for comparison. The wind changes at altitudes from 500 to 3000 m were measured using the Eastern Range network of five 915 MHz Doppler radar wind profilers. Quality controlled profiles were produced every 15 minutes for up to sixty gates, each representing 101 m in altitude over the range from 130 m to 6089 m. Five levels, each constituting three consecutive gates, were selected for analysis because of their significance to aerodynamic loads during the Space Shuttle ascent roll maneuver. The distribution of the magnitude of the vector wind change is found to be lognormal consistent with earlier work in the mid-troposphere. The parameters of the distribution vary with time lag, season and altitude. The component wind changes are symmetrically distributed with near-zero means, but the kurtosis coefficient is larger than that of a Gaussian distribution.

Merceret, Francis J.↗

NASA NTRS1986

Performance characteristics of wind profiling radars

Doppler radars used to measure winds in the troposphere and lower stratosphere for weather analysis and forecasting are lower-sensitivity versions of mesosphere-stratosphere-troposphere radars widely used for research. The term wind profiler is used to denote these radars because measurements of vertical profiles of horizontal and vertical wind are their primary function. It is clear that wind profilers will be in widespread use within five years: procurement of a network of 30 wind profilers is underway. The Wave Propagation Laboratory (WPL) has operated a small research network of radar wind profilers in Colorado for about two and one-half years. The transmitted power and antenna aperture for these radars is given. Data archiving procedures have been in place for about one year, and this data base is used to evaluate the performance of the radars. One of the prime concerns of potential wind profilers users is how often and how long wind measurements are lacking at a given height. Since these outages constitute an important part of the performance of the wind profilers, they are calculated at three radar frequencies, 50-, 405-, and 915-MHz, (wavelengths of 6-, 0.74-, and 0.33-m) at monthly intervals to determine both the number of outages at each frequency and annual variations in outages.

Strauch, R. G.↗

NASA NTRS2004

Strong Updraft Feature Associated with Hurricane Earl During Landfall

On 2-3 September 1998 hurricane Earl made landfall along the Gulf of Mexico coast, east of Panama City, FL. The University of Alabama in Huntsville Mobile Integrated Profiling System (MIPS) was located at the airport in Tallahassee, FL and made measurements of Earl with a 915 MHz Doppler wind profiler as the system moved across the Florida panhandle. As the center of Earl approached MIPS, a particularly strong updraft feature, having a magnitude of approx. 15 m/s within the lowest 3.0 km above ground level was associated with a rain band. An analysis of the changes hurricane Earl underwent as it made landfall are presented. Measurements used include surface thermodynamic and pressure observations, lightning data, National Weather Service Doppler Weather Surveillance Radar (WSR-88D) data, and Geostationary Earth Orbiting Satellite (GOES) data. Then an analysis focusing on the boundary layer properties and the updraft feature's depth, intensity and duration as measured by the MIPS 915 MHz Doppler wind profiler are presented.

Roberts, Barry C.↗

NASA NTRS1986

Methods for verifying the accuracy of wind profiles

Comparisons of radar-measured winds have been made with several types of measurements not only to verify radar data but also to seek a satisfactory comparison method. Three of the comparisons that have been made with Colorado Profiler radars are summarized. Radar measurements were compared with radiosonde measurements. Infrared lidar and 915 MHz radar were compared with radiosondes. A brief radar/radar comparison was made using the 50-MHz radar and a 3-cm wavelength meteorological Doppler radar during precipitation.

Strauch, R. C.↗

DOE OSTI2025

BLOC Site - Radar Wind Profiler / Derived Data Reformatted

A radar wind profiler measures the Doppler shift of electromagnetic energy scattered back from atmospheric turbulence and hydrometeors along 3-5 vertical and off-vertical point beam directions. Back-scattered signal strength and radial-component velocities are remotely sensed along all beam directions and combined to derive the horizontal wind field over the radar. These data are typically sampled and averaged hourly or sub-hourly (15-min) and usually have 60-m and/or 100-m vertical resolutions up to 4 km for the 915 MHz system. Both a high-resolution, lower height coverage mode and a low-resolution, higher height coverage mode are used to collect the data.

17 WIND ENERGY↗

DOE OSTI2025

NANT Site - Radar Wind Profiler / Derived Data Reformatted

17 WIND ENERGY↗

NASA NTRS1984

Performance of the Colorado wind-profiling network, part 1.5A

The Wave Propagation Laboratory (WPL) has operated a network of radar wind Profilers in Colorado for about 1 year. The network consists of four VHF (50-MHz) radars and a UHF (915-MHz) radar. The Platteville VHF radar was developed by the Aeronomy Laboratory (AL) and has been operated jointly by WPL and AL for several years. The other radars were installed between February and May 1983. Experiences with these radars and some general aspects of tropospheric wind measurements with Doppler radar are discussed.

Strauch, R. G.↗

NASA NTRS1984

Data base for the Colorado profiling network

The Colorado profiling system developed by the Wave Propagation Laboratory (WPL) includes five (soon to be six) Doppler radar wind Profilers; four operate at 49 MHz (6 m) and are located at Platteville, Fleming, Lay Creek, and Cahone, and one operates at 915 MHz (33 cm) and is located at Denver. The sixth radar, now under construction, will operate at 405 MHz (UHF) and will be located at Boulder. Microwave radiometers and surface meteorological stations are at some of the radar sites. The data base for the wind Profilers is discussed.

Merritt, D. A.↗

NASA NTRS2011

Quality-Controlled Wind Data from the Kennedy Space Center 915 Megahertz Doppler Radar Wind Profiler Network

The National Aeronautics and Space Administration s (NASA) Kennedy Space Center (KSC) has installed a five-instrument 915-Megahertz (MHz) Doppler Radar Wind Profiler (DRWP) system that records atmospheric wind profile properties. The purpose of these profilers is to fill data gaps between the top of the KSC wind tower network and the lowest measurement altitude of the KSC 50-MHz DRWP. The 915-MHz DRWP system has the capability to generate three-dimensional wind data outputs from approximately 150 meters (m) to 6,000 m at roughly 15-minute (min) intervals. NASA s long-term objective is to combine the 915-MHz and 50-MHz DRWP systems to create complete vertical wind profiles up to 18,300 m to be used in trajectory and loads analyses of space vehicles and by forecasters on day-of-launch (DOL). This analysis utilizes automated and manual quality control (QC) processes to remove erroneous and unrealistic wind data returned by the 915-MHz DRWP system. The percentage of data affected by each individual QC check in the period of record (POR) (i.e., January to April 2006) was computed, demonstrating the variability in the amount of data affected by the QC processes. The number of complete wind profiles available at given altitude thresholds for each profiler in the POR was calculated and outputted graphically, followed by an assessment of the number of complete wind profiles available for any profiler in the POR. A case study is also provided to demonstrate the QC process on a day of a known weather event.

Dryden, Rachel L.↗