Excessive entry loads for abort trajectories for the nominal AS-205/101 launch profile
Excessive entry loads for abort trajectories from nominal AS-205/101 launch profile
Henderson, E. M.↗
SEARCH · Search NASA
Results for “ABORT TRAJECTORY”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Optimal return-to-launchsite abort trajectories for an HL-20 Personnel Launch System vehicle
The Personnel Launch System (PLS) being studied by NASA is a system to complement the Space Shuttle and provide alternative access to space. The PLS consists of a manned spacecraft launched by an expendable launch vehicle (ELV). A candidate for the manned spacecraft is the HL-20 lifting body. In the event of an ELV malfunction during the initial portion of the ascent trajectory, the HL-20 will separate from the rocket and perform an unpowered return-to-launchsite (RTLS) abort. This paper describes an investigation of the RTLS abort scenario using optimal control theory. The objective of the abort trajectory is to maximize final altitude at a point near the runway. The assumption is then made that there exists a control history to steer the vehicle to any final altitude lower than the final optimal altitude. With this selection of cost function, and with this assumption, the feasibility of an RTLS abort at different times along the ascent trajectory can be determined. The method of differential inclusions, which allows the determination of optimal states and eliminates the need for determining the optimal controls, is used to determine the optimal trajectories.
Dutton, Kevin E.↗
Optimal RTLS abort trajectories for an HL-20 personnel launch vehicle
The primary objective of this study was to determine whether Return To Launch Site (RTLS) abort at T seconds along the launch trajectory of the Personnel Launch System (PLS) is possible using optimal control theory. The secondary objective is to assess effects of bank angle constraint, lift coefficient constraint, free and fixed final boundary conditions, etc. of the vehicle. The PLS is a complementary system to the Space Shuttle.
Dutton, Kevin↗
Abort Trajectory Design Strategies for the Artemis Missions
NASA's Artemis campaign plans to send astronauts to the lunar surface for the first time since 1972. The campaign relies on the Orion crew capsule to ferry the crew from Earth to an L2 9:2 lunar synodic resonant Near-Rectlinear Halo Orbit (NRHO) before descent to the lunar surface. This investigation examines a process to construct various abort families during transit from Earth to the NRHO using the Earth-Moon Circular Restricted Three-Body Problem (CR3BP). The initial trajectories are constructed using the CR3BP and categorized in families. A process is then summarized to transcribe and converge trajectories from the CR3BP into a higher-fidelity model. Ultimately, an effective methodology to develop, classify and converge these aborts in higher-fidelity is critical to the Artemis program in the event of an anomaly during the crew transit.
Trajectory Design↗
Crew Exploration Vehicle Ascent Abort Trajectory Analysis and Optimization
The Orion Crew Exploration Vehicle is the first crewed capsule design to be developed by NASA since Project Apollo. Unlike Apollo, however, the CEV is being designed for service in both Lunar and International Space Station missions. Ascent aborts pose some issues that were not present for Apollo, due to its launch azimuth, nor Space Shuttle, due to its cross range capability. The requirement that a North Atlantic splashdown following an abort be avoidable, in conjunction with the requirement for overlapping abort modes to maximize crew survivability, drives the thrust level of the service module main engine. This paper summarizes 3DOF analysis conducted by NASA to aid in the determination of the appropriate propulsion system for the service module, and the appropriate propellant loading for ISS missions such that crew survivability is maximized.
Falck, Robert D.↗
Transformation techniques for minimax optimal control problems and their application to optimal flight trajectories in a windshear - Optimal abort landing trajectories
The optimal-control problem of abort-landing trajectories in the presence of low-altitude wind shear is investigated analytically. The vertical-plane Newtonian motion of a point-mass aircraft in a steady wind field is modeled, and a sequential gradient-restoration algorithm is applied. Numerical results showing the effects of wind-shear intensity, initial altitude, and power-setting rate are presented in extensive graphs and discussed in detail. Optimal trajectories for strong or severe wind shears are found to begin with a descent, followed by level flight and then an ascent after leaving the shear region.
Miele, A.↗
Performance evaluation of candidate strapdown and gimballed systems using nominal and abort shuttle trajectories
Space shuttle guidance, evaluating performance of strapdown and gimballed systems by nominal and abort trajectories
Mckern, R. A.↗
Optimization and guidance of abort landing trajectories in a windshear
The abort landing problem for flight trajectories in the presence of windshear is considered with reference to flight in a vertical plane. The optimal trajectory (OT) problem is a minimax problem or Chebyshev problem of optimal control which can be converted into a Bolza problem through suitable transformations. Numerical results for several combinations of windshear intensities and initial altitudes are presented. A guidance trajectory (GT) law is implemented in feedback control form, subject to prescribed bounds on the angle of attack and its time derivative. Simplified guidance trajectories (SGT) are then considered, leading to a safe target altitude guidance. Conclusions derived for strong-to-severe windshear conditions include GT and SGT preserving the basic properties of OT, and the peak altitude drop of GT and SGT being less than that of the constant pitch trajectory and the maximum angle-of-attack trajectory.
Miele, A.↗
Shuttle Orbiter Contingency Abort Aerodynamics: Real-Gas Effects and High Angles of Attack
An important element of the Space Shuttle Orbiter safety improvement plan is the improved understanding of its aerodynamic performance so as to minimize the "black zones" in the contingency abort trajectories [1]. These zones are regions in the launch trajectory where it is predicted that, due to vehicle limitations, the Orbiter will be unable to return to the launch site in a two or three engine-out scenario. Reduction of these zones requires accurate knowledge of the aerodynamic forces and moments to better assess the structural capability of the vehicle. An interesting aspect of the contingency abort trajectories is that the Orbiter would need to achieve angles of attack as high as 60deg. Such steep attitudes are much higher than those for a nominal flight trajectory. The Orbiter is currently flight certified only up to an angle of attack of 44deg at high Mach numbers and has never flown at angles of attack larger than this limit. Contingency abort trajectories are generated using the data in the Space Shuttle Operational Aerodynamic Data Book (OADB) [2]. The OADB, a detailed document of the aerodynamic environment of the current Orbiter, is primarily based on wind-tunnel measurements (over a wide Mach number and angle-of-attack range) extrapolated to flight conditions using available theories and correlations, and updated with flight data where available. For nominal flight conditions, i.e., angles of attack of less than 45deg, the fidelity of the OADB is excellent due to the availability of flight data. However, at the off-nominal conditions, such as would be encountered on contingency abort trajectories, the fidelity of the OADB is less certain. The primary aims of a recent collaborative effort (completed in the year 2001) between NASA and Boeing were to determine: 1) accurate distributions of pressure and shear loads on the Orbiter at select points in the contingency abort trajectory space; and 2) integrated aerodynamic forces and moments for the entire vehicle and the control surfaces (body flap, speed brake, and elevons). The latter served the useful purpose of verification of the aerodynamic characteristics that went into the generation of the abort trajectories.
Prabhu, Dinesh K.↗
Optimal abort landing trajectories in the presence of windshear
The abort landing problem is considered with reference to flight in a vertical plane. It is assumed that, upon sensing that the aircraft is in a windshear, the pilot increases the power setting at a constant time rate until maximum power setting is reached; afterward, the power setting is held constant. The performance index being minimized is the peak value of the altitude drop; the resulting optimization problem is a minimax or Chebyshev problem of optimal control. It is found that, for strong-to-severe windshears, the optimal trajectory includes three branches: a descending flight branch followed by a nearly horizontal flight branch, followed by an ascending flight branch after the aircraft has passed through the shear region. The peak altitude drop depends on the windshear intensity, the initial altitude, and the power setting rate; it increases as the windshear intensity increases and the initial altitude increases, and it decreases as the power setting rate increases.
Miele, A.↗
Fast Calculation of Abort Return Trajectories for Manned Missions to the Moon
In order to support the anytime abort requirements of a manned mission to the Moon, the vehicle abort capabilities for the translunar and circumlunar phases of the mission must be studied. Depending on the location of the abort maneuver, the maximum return time to Earth and the available propellant, two different kinds of return trajectories can be calculated: direct and fly-by. This paper presents a new method to compute these return trajectories in a deterministic and fast way without using numerical optimizers. Since no simplifications of the gravity model are required, the resulting trajectories are very accurate and can be used for both mission design and operations. This technique has been extensively used to evaluate the abort capabilities of the Orion/Altair vehicles in the Constellation program for the translunar phase of the mission.
Senent, Juan S.↗
Empire. a study of early manned interplanetary missions final report, may 26 - nov. 25, 1962
This report summarizes the investigations and results of the EMPIRE Study Program undertaken by Aeronutronic Division of Ford Motor Company for the Future Projects Office, Marshall Space Flight Center, under Contract NAS8-5025. The dual planet flyby missions of the Crocco and Symmetric trajectory classes are discussed. The Crocco mission with an August 1971 launch window requires an interplanetary injection velocity increment of i0.i km/sec, has a return velocity of 13.5 km/sec, and takes approximately 400 days. The Symmetric mission with a July 1970 launch window has an injection velocity increment of 5.3 km/sec, a return velocity of 15.8 km/sec, and takes approximately 630 days. Additional results of the trajectory studies and abort trajectories are reported. The guidance and navigation subsystem, midcourse corrections, and planetary approach corrections are discussed. A detailed analysis of the reentry phase of EMPIRE includes consideration of an Apollo-type, a Drag Brake, and a lifting-type reentry vehicle to return the six-man crew at mission completion or in an aborted condition. The High L/D reentry vehicle is used in the missions considered. The various technological areas required for design criteria are developed and several spacecraft designs are considered. The all chemical propulsion Crocco system is discarded due to weight, complexity, and cost. The nuclear injected Crocco is treated in a similar manner. The lower energy injection for the Symmetric Mission leads to the feasibility of a nuclear injected vehicle with an Earth orbit weight of about 180,000 kilograms (400,000 pounds) before interplanetary transit. In addition, two chemical symmetric vehicles are treated. Conservative radiation exposures are derived, for the 630 day mission, of less than 200 REM and a polyethelene radiation shelter is designed. Scientific aspects of the missions are discussed. Mission Success Probabilities are presented for the various missions considered and for Saturn C-5, Nova, and Super-Nova Earth launch vehicles in light of possible development. The need for acceleration of nuclear rocket engine developments and auxiliary power developments is indicated. Definition of a larger nuclear engine of the order of 200,000 pounds thrust and about 800 seconds burning time or 50,000 pound thrust and 3600 seconds burning time is indicated for the Symmetric Mission in 1970 (energy requirements are higher in 1972 and for later launch due to the less favorable position of Mars)_ Immediate development of this advanced nuclear propulsion capability is recommended. A Development Plan and Funding Schedule is given for the 1970 launch window pinpointing the critical development areas and indicating a total program cost of $12.6 billion independent of other programmed R&D costs. In conclusion, technological feasibility for an early manned dual planet Mars-Venus flyby is believed to be demonstrated in this study. Several areas of accelerated development and experimental confirmation of theory are pinpointed. The necessary funding and development of Nova or orbital operations capability with Saturn C-5's is required. The 1970 launch window appears to offer the least expensive Symmetric Mission for several years into the 1980's.
F. P. Dixon↗
Abort landing guidance trajectories in the presence of windshear
The flight trajectory of abort landing in the presence of windshear is examined with reference to flight in a vertical plane. It is assumed that the only control is the angle of attack. Inequality constraints are imposed on both the angle of attack and its time derivative. Numerical results are obtained for several combinations of windshear intensities and initial altitudes. Guidance trajectories are considered, approximating the optimal trajectories and using local information on the state of the aircraft, the initial altitude, and the total wind velocity difference. Results are presented for optimal trajectories, guidance trajectories, simplified guidance trajectories, constant pitch trajectories, and maximum angle of attack trajectories.
Miele, A.↗
Study of thermal protection requirements for a lifting body entry vehicle suitable for near-earth missions Final report
Reentry and abort trajectory analyses, and thermal protection requirements for lifting body entry vehicles
THERMAL PROTECTION↗
Traj_opt User's Guide
Trajectory optimization program Traj_opt was developed at Ames Research Center to help assess the potential benefits of ultrahigh temperature ceramic materials applied to reusable space vehicles with sharp noses and wing leading edges. Traj_opt loosely couples the Ames three-degrees-of-freedom trajectory package Traj (see NASA-TM-2004-212847) with the SNOPT optimization package (Stanford University Technical Report SOL 98-1). Traj_opt version January 22, 2003 is covered by this user guide. The program has been applied extensively to entry and ascent abort trajectory calculations for sharp and blunt crew transfer vehicles. The main optimization variables are control points for the angle of attack and bank angle time histories. No propulsion options are provided, but numerous objective functions may be specified and the nonlinear constraints implemented include a distributed surface heating constraint capability. Aero-capture calculations are also treated with an option to minimize orbital eccentricity at apoapsis. Traj_opt runs efficiently on a single processor, using forward or central differences for the gradient calculations. Results may be displayed conveniently with Gnuplot scripts. Control files recommended for five standard reentry and ascent abort trajectories are included along with detailed descriptions of the inputs and outputs.
Saunders, David A.↗
Study of LEM abort transfer trajectories
Transfer characteristics for lunar module from descent and circular parking orbits
Casey, A. J.↗
Real-Time Trajectory Assessment and Abort Management for the X-33 Vehicle
The X-33 is a flying testbed to evaluate technologies and designs for a reusable Single Stage To Orbit (SSTO) production vehicle. Although it is sub-orbital, it is trans-atmospheric. This paper will discuss the abort capabilities, both commanded and autonomous, available to the X-33. The cornerstone of the abort capabilities is the Performance Monitor (PM) and it's supporting software. PM is an on-board 3-DOF simulation, which evaluates the vehicle ability to execute the current trajectory. The Abort Manager evaluates the results from PM, and, when indicated, computes and implements an abort trajectory.
Moise, M. C.↗
Artemis I Off-Nominal-Trajectory Design and Optimization
In order to achieve the Artemis I mission objectives to human-rate the Orion spacecraft even under off-nominal conditions, trajectories were developed to handle contingency scenarios: alternate missions for contingencies before or during the Trans-Lunar Injection burn, recoveries to return Orion to the nominal trajectory after a delayed or partial burn, and abort trajectories to return the spacecraft to Earth after a critical failure. In addition, disposal trajectories were generated for situations where recovery was not an option. Details are given on the trajectory characteristics, solution families, the generation of the trajectories, and operations considerations.
Artemis I↗