Search NASA⌕ Search

SEARCH · Search NASA

Results for “ALKALI METAL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Electrolyte Design and Optimization for Alkali Metal‐Sulfur Batteries

Alkali metal-sulfur batteries, including lithium-sulfur (Li-S), sodium-sulfur (Na-S), and potassium-sulfur (K-S) systems, have garnered significant attention as promising electrochemical energy storage (EES) technologies. Among them, Li-S batteries stand out as strong contenders for next-generation energy storage, owing to their high energy density and the cost-effectiveness of sulfur-based cathodes. However, with the rapid technological advances and the escalating energy demand, lithium resources are becoming increasingly scarce, making it imperative to explore alternative metal anodes to replace lithium. Therefore, Na-S and K-S batteries, serving as counterparts to Li-S systems, are emerging as formidable contenders for next-generation energy storage technologies due to the abundant and cost-effective nature of sodium and potassium. Although Na-S and K-S batteries possess considerable potential in the energy sector, their development is still in its infancy, with performance constrained by the nascent state of electrolyte design and optimization. This review article provides a comprehensive overview of recent advancements and developments in liquid electrolytes for alkali metal-sulfur batteries. Additionally, it identifies key challenges and proposes future research directions aimed at enhancing electrolyte stability, optimizing interfacial compatibility, and improving the overall performance of alkali metal-sulfur batteries.

25 ENERGY STORAGE↗
DOE OSTI2026

Adsorption, charge transfer and a coverage-driven transition of alkali metals on rutile TiO 2 (110)

The interaction of alkali metals with metal oxide surfaces is central to tuning surface reactivity in heterogeneous catalysis and photocatalysis. Here we present a comprehensive DFT+U study of the adsorption of alkali metals (Li, Na, K, Rb, Cs) on the (110) surface of rutile TiO 2 . At low coverage (θ = 1/8), all alkali metals bind preferentially to bridging oxygen sites with adsorption energies in the range −4.06 to −3.33 eV, transferring nearly one full electron (0.92–0.99 |e|) to the substrate and inducing Ti 4+ → Ti 3+ reduction. The excess charge localizes preferentially at subsurface Ti sites in the form of small polarons. Diffusion barriers indicate facile motion along bridging-oxygen rows, whereas inter-row hopping is strongly hindered. Coverage effects were examined systematically for potassium: adsorption energy and charge transfer per K atom decrease monotonically with increasing θ. Strikingly, a sharp energy discontinuity occurs between θ = 4/8 and θ = 5/8 (ΔE ≈ 1 eV per atom), which we identify as a coverage-driven structural transition arising from steric packing constraints and enhanced K–K electrostatic repulsion once every (1×1) surface cell is occupied. This structural transition perfectly correlates with a dramatic drop in the work function down to an ultra-low minimum of 0.84 eV at θ=5/8, followed by a metallization- driven recovery at higher coverages. Ab initio molecular dynamics simulations confirm zigzag K arrangements at moderate coverage (θ = 1/3), while at high coverage (θ = 2/3) short-range K–K correlations emerge without long-range order. These results provide atomistic insight into the structure–activity relationships underlying alkali promotion effects on oxide-supported catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Elucidating the Link Between Alkali Metal Ions and Reaction-Transport Mechanisms in Cathode Electrodes for Alkali-ion Batteries

Our long-term goal is to improve the reliability of electrode materials and their ability to transport and store various metal ions for electrochemical energy storage applications. The main objective of this work was to investigate the intrinsic relationship between the role of alkali metal ions and electrochemically driven mechanical stability and kinetic properties of battery materials. The overall question was “What is the role of alkali metal ions on the electrochemical and mechanical behavior of cathode electrodes? Our guiding hypothesis was that intercalation of larger alkali metal ions (Na and K) inevitably alters the coupled transport-reaction processes during battery operation in organic electrolytes, leading to more intensive chemo-mechanical instabilities in cathode electrodes, resulting in rapid capacity fade. To validate the hypothesis, we experimentally characterized the reaction-transport processes and governing forces driving the instability of electrode materials in different alkali metal-ion environments. The project had three main tasks. The first one was to investigate intercalation-induced strains and associated stress generation, and their impact on structural deformations in composite cathode electrodes. The second task focused on identifying potential-dependent dynamic changes in the electrode-electrolyte interface in alkali metal ion batteries. The last task was focused on determining how larger alkali metal ions with slower diffusivity affect the transport-mechanics coupling at faster scan rates, compared to smaller ions with faster diffusivity in electrodes. We shortly provided the outcome of each task in the accomplishment section. This project produced 10 peer-reviewed publications (9 research papers and one review manuscript) and supported two Ph.D. students, who graduated from Oklahoma State University.

25 ENERGY STORAGE↗
DOE OSTI2025

Promoting the oxidative coupling of methanol and dimethylamine using group 1 alkali metals on palladium-gold nanoparticles

PdAu/SiO 2 catalysts were synthesized by strong electrostatic adsorption (SEA) and characterized by TEM, DRIFTS, XRD, XAS, and O 2 -TPD. The use of group 1 alkali salt solutions to control pH during SEA syntheses led to uptake of alkali metals observed reductions in the densities of terminal silanol groups of the SiO 2 support. In the absence of alkali metals, PdAu/SiO 2 catalyzes oxidative C-N bond formation between methanol and dimethylamine (DMA), yielding dimethylformamide (DMF) with ∼95 % carbon selectivity (CO 2 ∼5 %) at temperatures below 413 K. When Na, K, and Cs were present on the catalyst, methyl formate (MF) and tetramethylurea (TMU) were observed as additional products (combined ∼30 % carbon selectivity) while only TMU was detected for the Li-promoted catalyst. Total coupling product rate increased for promoted samples in the order Li < Na < Cs < K, and the apparent kinetics over the Cs-promoted catalyst were distinct from those over the alkali-free catalyst as the apparent reaction order with respect to DMA decreased and the apparent activation energy increased. Finally, this work demonstrates the sensitivity of oxidative coupling reactions to alkali metal promoters and the opportunity to achieve alkali promotion of metal catalysts during SEA synthesis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Activation of Semicore Electrons in Alkali Metals and Their Role in the B1–B2 Phase Transition under Pressure

Alkali fluorides are often thought of as archetypical ionic compounds whose structures can be understood in terms of the packing of rigid spheres. At ambient pressure, they assume the rocksalt (B1) structure, while under only a few GPa of pressure, the cesium chloride (B2) structure, with higher coordination numbers, is assumed for KF, RbF, and CsF. NaF requires almost 10 times more pressure to undergo this same phase transition, which has not been observed for LiF. Herein, we provide a detailed analysis, based upon quantum chemical calculations, explaining this behavior. We show that for the heavier alkali metals, the semicore p orbitals engage in metal-metal bonding in the B2 phase, facilitating the pressure-induced B1 → B2 structural transition. Furthermore, these findings suggest that the semicore orbitals of heavy alkali metals can be activated without the need of strong oxidants at very mild levels of compression, resulting in the formation of chemical bonds, challenging both traditional and modern core-valence distinctions. In addition, we argue that Cs 5p-5p bonding in CsCl occurs already at ambient pressure, stabilizing the B2 phase, and suggest experiments that may be able to detect signatures of such bonding.

Anions↗
DOE OSTI2025

Alkali Metal Control of Triplet-Mediated C–H Activation in Iron-Mediated Coupling of Dinitrogen and Benzene

Direct coupling of N 2 with abundant feedstocks like benzene to form N-containing organic compounds is a promising strategy for N 2 fixation pathways. The challenge of coupling N 2 activation and C–H bond oxidative addition was recently solved by introducing a reversible benzene C–H bond activation process mediated by a low-valent Fe(0) complex, which gave an organometallic product that could couple with partially reduced N 2 . Interestingly, the energetics of the C–H oxidative addition/reductive elimination step depends on the choice of alkali metal. However, the reason why the alkali metal influences the C–H bond activation remained elusive. In this work, we present a comprehensive study on this Fe(0)-mediated reversible C–H activation. Through density functional theory combined with high-level coupled cluster calculations, we discovered that the intermediate-spin triplet (S = 1) controls the energy of the transition state for C–H cleavage, while the high-spin quintet (S = 2) controls the position of the equilibrium. Na + drives the equilibrium toward oxidative addition due to an electrostatic effect, while K + and Rb + are dominated by a steric effect that favors the iron(0) species. The key role played by nonbonding interactions in the Fe-mediated C–H activation provides a conceptual model for alkali control over organometallic transformations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Alkali Metal Cation Effects on Dinitrogen Complexes and Organometallic Compounds

Alkali metal (AM) cations are often taken for granted as counterions in coordination chemistry and organometallic reactions. However, the AM cation can be more than a bystander in inorganic transformations. This Account focuses on research that has elucidated several types of AM cation effects and how these can be exploited to achieve novel structures and reactivity pathways. Here, a particular focus is on AM cation effects in low-coordinate iron β-diketiminate complexes, though we address general trends and potential applications in systems with other supporting ligands.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Alkali Metal Cation Effects for Rapid C–H Activation by Iron(0) Complexes

C–H oxidative addition is a key reaction in organometallic catalysis, motivating efforts to accelerate it. Here, we examine an anionic beta-diketiminate-supported iron(0) species that was previously observed to activate C-H bonds with Na(15-crown-5), but not with K(18-crown-6) or Rb(18-crown-6). Though crown ethers are usually seen as beneficial due to their ability to solubilize alkali metal cations, we observe that removing the crown ether leads to rapid and complete oxidative addition of the C-H bond even by K, Rb, and Cs. The products are iron(II) phenyl hydride complexes that exist as dimers bridged by the alkali metals. Neutron crystallography of the cesium complex verifies the presence and location of the bridging hydrides. It is likely that the crown-free alkali metal cations have greater Lewis acidity that enables them to facilitate oxidative addition of the C-H bond. This system gives insight on how to control the rate and favorability of C-H activation through manipulation of the countercation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Strain Engineering: Reduction of Microstrain at the Perovskite Surface via Alkali Metal Chloride Treatment Enhances Stability

Degradation of halide perovskites under a humid atmosphere is the major challenge preventing widespread commercial deployment of this material class. Here it is shown that strain engineering via alkali metal chloride treatment at the FAPbI 3 /SnO 2 interface effectively improves moisture-related stability. CsCl and KCl treatments reduce microstrain at the perovskite surface and slow the α- to δ-phase transformation. Alkali metal treatments with LiCl, NaCl, and RbCl led to an increase in microstrain and faster degradation. The compressive strain at the perovskite surface was the smallest for CsCl and was linked to improved stability. First-principles density functional theory calculations confirm the preferential formation of alkali defects at interstitial positions at the perovskite surface. Particularly CsCl and KCl treatments lead to a release of compressive strain at the perovskite surface and local structural distortions that may favor passivation of surface defects. In contrast, the room-temperature dynamics of Li interstitials result in an overall expansion of lattice volume, which may be linked to more facile lattice degradation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Influences of Alkali Metal Cation Interactions on N2 Coordination to Iron(I) Beta-Diketiminate Complexes in Electrolyte Solutions

N2 functionalization reactions often use stable, isolable N2-bound complexes and low temperatures or highly activated reagents. However, little work has focused on systems where N2 binds weakly, and the N2 binding equilibrium can be modulated. Here, we describe analysis of surprising trends in alkali metal cation solvation on the formation of an anionic iron(I) beta-diketiminate complex and the subsequent N2 binding equilibrium. Variable temperature UV-vis spectroscopy shows that increased ionic strength in the coordinating solvent tetrahydrofuran promotes N2 coordination. Additionally, less solvated alkali metal cations in noncoordinating 2-methyltetrahydrofuran (MeTHF) stabilize N2 coordination, likely through the formation of contact ion pairs in solution that have enhanced N2 binding. Ionic strength has little effect on the energetics of N2 coordination to these proposed contact ion pairs in MeTHF. When the electrochemical analysis is done at –78 °C, there is an irreversible reduction of iron(II) and an anodically shifted oxidation, which is attributed to the formation of the spectroscopically observed N2 complex. Finally, bulk electrolysis is used to verify the electrochemical formation of the N2-bound anionic iron(I) complex. These studies demonstrate a new strategy for promoting N2 coordination by changing solution properties, which is relevant to homogeneous electrochemical N2 reduction methods.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Synthesis and characterization of uranium trichloride in alkali-metal chloride media

Given a growing interest in uranium salts for pyrochemical processing of used fuel and uranium-fueled molten salt reactors, the synthesis of uranium trichloride in alkali-metal chloride media was investigated in a series of four experiments. Specifically, uranium metal powder and uranium hydride powder were prepared and separately blended with ammonium chloride and lithium chloride – potassium chloride eutectic in two runs, while the same powders were separately blended with ammonium chloride and sodium chloride in two additional runs. Each of the lithium chloride – potassium chloride containing blends was slowly heated to 923 K, while those containing sodium chloride were heated to 1123 K. During each heat up, the ammonium chloride sublimed into gaseous ammonia and hydrogen chloride, leading to the chlorination of uranium metal or uranium hydride and the formation of molten salt solutions of the respective chlorides. Experimental conditions were incorporated in the runs to promote formation of uranium trichloride over uranium tetrachloride in the respective media. Molten samples of each run product were taken and characterized via chemical analyses, diffractometry, and microscopy. The final products from each run were dark dense ingots of the respective salt systems with uranium concentrations ranging from 44 to 51 wt%. Chemical analyses and diffractometry identified the predominant presence of uranium trichloride in these systems; however, a possible minor presence of uranium tetrachloride could not be conclusively dismissed.

D Herrmann, Steven↗
DOE OSTI2025

Uptake and binding of La 3+ and Cr 3+ ions by alkali metal substituted alpha-zirconium phosphate

The conversion of alpha-zirconium phosphate, Zr(HPO 4 ) 2 ·H 2 O, to the K-, Rb-, and Cs-phases and the subsequent ion exchange behavior of these alkali metal phases, A-ZrP, with La 3+ and Cr 3+ have been investigated. The conversion to the A-ZrP phases was achieved by reaction with metal chloride, metal hydroxide solution, and confirmed through various techniques, including X-ray powder diffraction, thermogravimetry analysis, IR spectroscopy, scanning and transmission electron microscopy, and X-ray photoelectron spectroscopy. The effect of material hydration, which increased the interlayer distance, was also examined. The ion exchange behavior of the A-ZrP showed strong affinity for both La 3+ , a representative for trivalent lanthanide metals, and Cr 3+ , a representative for the trivalent transition metals, with a rapid, near quantitative removal of the M 3+ ions at a pH of 3 when the ion concentration was ≤25% of the ion exchange capacity of the materials. Additionally, the ion affinity was shown to be pH and concentration-dependent, decreasing with a decrease in pH or an increase in ion concentration. Lastly, the binding strength of La- and Cr-loaded ZrP materials was examined through a series of leaching experiments in a carbonate buffer, phosphate buffer, HEPES buffer, and a series of EDTA solutions at various concentrations. No observable leaching occurred in the carbonate buffer, phosphate buffer, HEPES buffer, or when the EDTA concentration was below 0.1 mM. These results highlight the potential for the A-ZrP materials to provide a platform for trivalent transition metal and trivalent lanthanide radionuclide capture for various applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Revealing the electronic structure of van der Waals antiferromagnetic NiPS 3 through synchrotron-based 𝜇-ARPES and alkali metal dosing

Antiferromagnetic NiPS 3 has recently emerged as a quantum material of considerable interest, thanks to the discovery of multiple new couplings involving electrons, spins, orbitals, phonons, and magnons. However, controversies and open questions persist concerning the fundamental origins of these couplings. A critical piece of information required to advance the understanding is the precise electronic band structure of NiPS 3 . Angle-resolved photoemission spectroscopy (ARPES), combined with alkali metal dosing (AMD), can enable us to directly observe the subtle electronic states that appear around the Fermi surface, offering valuable insights into the intriguing quantum properties and interplays of the examined material. Here, in this study, we present a comprehensive characterization and analysis of the band structure of van der Waals layered antiferromagnet NiPS 3 , leveraging state-of-the-art μ-ARPES measurements supported by density functional theory (DFT) calculations. Theoretical DFT results identify the orbital contributions to the observed bands, providing a precise understanding of the experimental ARPES data. Crucially, AMD enables the observation of conduction band and defect-related states above the valence band maximum in NiPS 3 . Furthermore, temperature dependent ARPES results across the Néel transition temperature of NiPS 3 reveal that the paramagnetic and antiferromagnetic phases have nearly identical band structures, underlining the highly localized character of Ni d states. These findings substantially deepen our understanding of the electronic properties of NiPS 3 and lay a vital foundation for exploring the intriguing quantum phenomena it exhibits.

Cao, Yifeng [Boston Univ., MA (United States); Law↗
DOE OSTI2025

Attosecond time delays at Cooper minima in valence-shell photoionization of alkali-metal and alkaline-earth-metal atoms

Ji et al. [New J. Phys. 26, 093014 (2024)] established a direct link between the photoionization cross section and the attosecond time delay near Cooper minima (CM) in the valence shells of noble-gas atoms. This link is based on the analytic properties of the ionization amplitude in the complex plane of the photoelectron energy, and is particularly sensitive to the winding number of the amplitude around the origin of the complex energy plane. Here, in this study, we demonstrate an analogous relation for photoionization of the valence 𝑛⁢𝑠 shells of alkali-metal atoms (AMA), from Na (𝑛 = 3) to Cs (𝑛 = 6), as well as alkaline-earth-metal atoms (AEMA), from Mg (𝑛 = 3) to Ba (𝑛 = 6). To this end, we employ a fully relativistic formalism that separates the two complementary 𝑛⁢𝑠 1/2 → 𝐸⁢𝑝 1/2 and 𝐸⁢𝑝 3/2 ionization channels. Each of these channels exhibits a phase variation close to 𝜋, but in opposite directions, near their respective Cooper minima. This phase variation vanishes in a nonrelativistic formulation, where the two channels become degenerate. For AMA, due to the threshold proximity of the CM, the universal Coulomb contribution to the time delay must be subtracted. The remaining component of the time delay is target-specific, angular-dependent, and accessible through comparative measurements.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2026

Alkali-Metal Interlocking of 2D V 4 O 10 Sheets Defines Discretized Interlayer Shear Relationships

Low-dimensional materials manifest structural anisotropy, quantum confinement, and tightly bound excitonic states, which make them attractive building blocks that can be assembled within three-dimensional laterally stitched heterostructures, stacked van der Waals solids, and complex moiré superlattices. Ion intercalation in the galleries between layered materials provides a means of modifying interlayer separation and coupling, but it is also known to drive the shearing of the layers. In this article, we explore the distinct ligand coordination environments afforded by vanadyl oxygens of singular [V 4 O 10 ] sheets and examine how the size, polarizability, and stoichiometry of Group I cations sandwiched between such layers determine the interlocking of the sheets in stacked structures. Based on the topochemical insertion of alkali-metal ions into the layered λ-V 2 O 5 , we identify seven types of guest ion coordination sites discretized into four distinct regimes of interlayer shear in units of half octahedral widths. The coordination preferences of intercalated cations govern how they interlock 2D [V 4 O 10 ] sheets and engender specific shear conformations. We present evidence that static and dynamic disorder in guest ion arrangement modulate the magnetic structure of the intercalated compounds based on electrostatic polarization, localization of charge and spin density, and lattice distortion. The results illustrate the use of topochemical ion insertion to modulate stacking relationships and magnetic transition characteristics.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Lifshitz Transition and Band Structure Evolution in Alkali Metal Intercalated 1T′-MoTe 2

In van der Waals materials, coupling between adjacent layers is weak, and consequently interlayer interactions are weakly screened. This opens the possibility to profoundly modify the electronic structure, e.g., by applying electric fields or with adsorbates. Here, in this study, we show for the case of the topologically trivial semimetal 1T′-MoTe 2 that potassium dosing at room temperature significantly transforms its band structure. With a combination of angle-resolved photoemission spectroscopy, scanning tunneling microscopy, X-ray photoemission spectroscopy, and density functional theory we show that (i) for small concentrations of K, 1T′-MoTe 2 undergoes a Lifshitz transition with the electronic structure shifting rigidly, and (ii) for larger K concentrations 1T′-MoTe 2 undergoes significant band structure transformation. Our results demonstrate that the origin of this electronic structure change stems from alkali metal intercalation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Development of a conduction-based model for analyzing frozen startup of alkali-metal heat pipes

One key area of interest in heat pipe modeling/simulation is to analyze the startup behavior of the liquid-metal heat pipes (LMHPs) from a frozen state. This so-called ‘frozen startup’ process involves a complex set of nonlinear mass and heat transport phenomena, including phase transitions from solid to liquid and vapor, multiphase interactions, microporous wick flow, and compressible vapor dynamics. The complexity of these processes makes it challenging to simulate LMHP’s frozen startup using conventional numerical methods or commercial computational fluid dynamics (CFD) software. This paper presents a simplified conduction-based modeling approach that can provide practical insights into the entire LMHP frozen startup process, while alleviating the challenges of modeling its complex physics. The theoretical foundation and physical assumptions of the proposed model are based solely on heat-conduction equation, allowing for a more tractable simulation without sacrificing essential physical accuracy. The proposed model was implemented in a commercial CFD software, and its prediction was compared with the experimental data obtained from sodium heat-pipe startup experiments. The comparison highlights the proposed model's ability to capture the transient thermal behavior of LMHP during frozen startup. This study not only validates the conduction-based frozen startup modeling method but also shows its potential as a practical and efficient tool for understanding the startup performance of the LMHP systems.

Microreactor↗