Search NASA⌕ Search

SEARCH · Search NASA

Results for “ALUMINIUM 28”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Spectroscopy of {Lambda} hypernuclei in the (e, e'K{sup +}) reaction at Jefferson Lab

The coincidence experiment E01-011 (HKS), conducted in Hall C at Jefferson Laboratory in fall 2005, represents a new generation of high resolution {Lambda} hypernuclei spectroscopy experiments. It exploits the benefits of the associated electroproduction mechanism via the (e, e'K{sup +}) reaction. Compared with the widely studied meson-induced reactions, the higher quality quasi-continuous electron beam produces the potential for high resolution energy spectra. Further, it provides information complementary to meson-induced reactions: light neutron-rich and mirror hypernuclei, enhanced population of states accessible by spin-flip channels. The newly introduced tilt method of the electron spectrometer (ENGE) greatly reduced the rate of the background electrons due to Bremsstrahlung and Moeller scattering. A brand new high resolution kaon spectrometer (HKS) together with a sophisticated detector package yielded excellent PID and momentum resolution. This resulted in quality missing mass spectra with energy resolution of approximately 400-500 keV (FWHM), an unprecedented value in hypernuclear reaction spectroscopy. The experiment measured the spectra of exotic neutron rich and mirror {Lambda} hypernuclei {sub {Lambda}}{sup 7}He, {sub {Lambda}}{sup 12}B, {sub {Lambda}}{sup 28}Al with high statistics.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Investigation of discrete {gamma} radiation in interactions of 14.9-MeV neutrons with natural silicon by a total {gamma}-radiation measurement technique

The discrete {gamma} radiation in the interaction of 14.9-MeV neutrons and a natural silicon sample is investigated with a total {gamma}-radiation measurement (TGRM) technique. Fifty prompt {gamma} lines, one delayed {gamma} line, and seven final nuclei are identified. Forty-one possible transitions are designated. Differential production cross sections of 40 {gamma} lines at 40 deg., 55 deg., 90 deg., 125 deg., and 140 deg. are determined. Using relative differential production cross sections, accurate integral isotopic cross sections of the {sup 28}Si(n,p){sup 28}Al reaction are determined, and partial integral isotopic cross sections of the {sup 28}Si(n,n'){sup 28}Si, {sup 28}Si(n,{alpha}){sup 25}Mg, {sup 29}Si(n,n'){sup 29}Si, and {sup 30}Si(n,n'){sup 30}Si reaction channels are also estimated. The present results are in good agreement with some recent experimental and evaluated results.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Electromagnetic Moments of Proton-Rich {sup 28}P and Decomposition of Its Spin

The magnetic moment of {sup 28}P(Ipi = 3{sup +}, T{sub 1/2} = 270.3 ms) has been measured precisely by means of beta-NMR technique. The obtained magnetic moment is |mu({sup 28}P)| = 0.3115 (34) mu{sub N}. Combined with the magnetic moment of its mirror partner {sup 28}Al, the nuclear spin I = 3 is decomposed into its 4 components. The measurement of the Q moment has also been tried. From the preliminary NQR spectrum, it was found that the quadrupole coupling constant eqQ/h may be slightly larger than the prediction, which may show enhancement of the Q moment.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Nuclear Data Sheets for A = 28

Evaluated spectroscopic data and level schemes from radioactive decay and nuclear reaction studies are presented for {sup 28}F, {sup 28}Ne, {sup 28}Na, {sup 28}Mg, {sup 28}Al, {sup 28}Si, {sup 28}P, and {sup 28}S. This evaluation for A=28 supersedes the earlier evaluations by P.M. Endt (1998En04 and 1990En08). However, additional/detailed data for these nuclides can be found in earlier evaluations 1978En02 and 1973EnVA also by P.M. Endt.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Evidence of a Proton Halo in {sup 23}Al: A Mean Field Analysis

The structural properties of Al isotopes are analysed using the relativistic mean field formalism with NL3 parameter set. The Glauber model technique is implemented to study the reaction dynamics for {sup 23−28}Al taking {sup 12}C as the target. The enhanced reaction cross section, high value of radius, narrow longitudinal momentum distribution and small proton separation energy of {sup 23}Al favours a proton halo structure for this nucleus.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Lost alpha-particle diagnostics from a D-T plasma by using nuclear reactions

Among various methods proposed for alpha-particles loss measurement, we studied on those by measuring gamma rays of three cases, from (1) nuclear reactions induced by alpha particles, (2) those from short-life-time activities and (3) those from long-life-time activities induced by alpha particles. The time evolution of local alpha flux may possibly be measured by using the {sup 9}Be (a, n) {sup 12}C reaction (1). Using the same system, but with a target set up close to the first wall, activation measurement on site right after turning-off the discharge is possible (2). Nuclear reaction, {sup 25}Mg (a, p) {sup 28}Al, that produce radioisotopes of short lifetime of 2.2 minutes in one of the best candidates. As to the activation to a long lifetime (3), it is predicted that the gamma ray yield from {sup 19}F (a, n) {sup 22}Na reaction is enough for the measurement at the reactor site.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Study of {sup 31}P(n,α){sup 28}Al reaction using d(d,n){sup 3}He for the possible interference with {sup 27}Al(n,γ){sup 28}Al - Paper 44

At McMaster we use neutrons from the {sup 7}Li(p,n){sup 7}Be reaction to measure aluminum in human subjects via the {sup 27}Al(n,γ){sup 28}Al reaction. We use proton energies of between 1.9 MeV and 2.3 MeV, yielding maximum neutron energy of 0.575 MeV. In principle, {sup 28}Al can also be produced via the {sup 31}P(n,α){sup 28}Al reaction, which has a neutron energy threshold of 2.008 MeV. When aluminum is measured in bone, there can be 10{sup 5} times the mass of phosphorus present as there is aluminum. However, this potential interference cannot arise using the {sup 7}Li(p,n){sup 7}Be reaction in the proton energy range specified. Collaborators at Atomic Energy of Canada Limited (AECL), Chalk River, Purdue University in the USA and Shanxi Medical University in Taiyuan, China are also interested in being able to measure aluminum in bone in living human subjects. Both AECL and Purdue have acquired D-D sets (accelerators producing neutrons via the d(d,n){sup 3}He reaction). These operate at high current (∼mA) and relatively low accelerating voltage (150 kV), relying on quantum mechanical tunneling through the Coulomb barrier. These D-D sets produce neutrons of energy 2.565 MeV. This is above the threshold for the {sup 31}P(n,α){sup 28}Al reaction, but we have not been able to find any report in which this reaction has had a cross section measurably greater than zero for neutron energies of less than 3 MeV. So, it is an open question as to whether the potential interfering reaction with phosphorus is a concern when using neutrons from a D-D set to measure aluminum in bone. (authors)

61 RADIATION PROTECTION AND DOSIMETRY↗

TU-F-CAMPUS-T-01: Dose and Energy Spectra From Neutron Induced Radioactivity in Medical Linear Accelerators Following High Energy Total Body Irradiation

Purpose: To assess the risk posed by neutron induced activation of components in medical linear accelerators (linacs) following the delivery of high monitor unit 18 MV photon beams such as used in TBI. Methods: Gamma spectroscopy was used to identify radioisotopes produced in components of a Varian 21EX and an Elekta Synergy following delivery of photon beams. Dose and risk estimates for TBI were assessed using dose deliveries from an actual patient treatment. A 1 litre spherical ion chamber (PTW, Germany) has been used to measure the dose at the beam exit window and at the total body irradiation (TBI) treatment couch following large and small field beams with long beam-on times. Measurements were also made outside of the closed jaws to quantify the benefit of the attenuation provided by the jaws. Results: The radioisotopes produced in the linac head have been identified as {sup 187}W, {sup 56}Mn, {sup 24}Na and {sup 28}Al, which have half-lives from between 2.3 min to 24 hours. The dose at the beam exit window following an 18 MV 2197 MU TBI beam delivery was 12.6 µSv in ten minutes. The dose rate at the TBI treatment couch 4.8 m away is a factor of ten lower. For a typical TBI delivered in six fractions each consisting of four beams and an annual patient load of 24, the annual dose estimate for a staff member at the treatment couch for ten minutes is 750 µSv. This can be further reduced by a factor of about twelve if the jaws are closed before entering the room, resulting in a dose estimate of 65 µSv. Conclusion: The dose resulting from the activation products for a representative TBI workload at our clinic of 24 patients per year is 750 µSv, which can be further reduced to 65 µSv by closing the jaws.

61 RADIATION PROTECTION AND DOSIMETRY↗

Fabrication of ultra-fine grained aluminium tubes by RTES technique

Recently, repetitive tube expansion and shrinking have been exploited as a means for producing ultra-fine grained and nano-crystalline microstructures for magnesium alloy tubes. This method includes two different half-cycles and was based on pressing a tubular part through an angular channel die with two shear zones. Since the aluminium alloys are the most widely used materials in industries, in this study, repetitive tube expansion and shrinking as a new severe plastic deformation technique was applied to commercially pure aluminium for fabricating ultra-fine grained aluminium tubes for the first time and the ability of this process in significant grain refinement is determined even after single cycle. Transmission electron microscopy and X-ray diffraction were used to evaluate the microstructure of the repetitive tube expansion and shrinking processed materials and the examinations showed ultra-fine grains with the average grain size of 320 nm after one cycle of repetitive tube expansion and shrinking. The yield strength, ultimate tensile strength increased notably by the factor of 2.17 and 1.27 respectively, after one cycle of repetitive tube expansion and shrinking, whereas the elongation to failure as well as the uniform elongation decreased. Furthermore, micro-hardness distribution through the part's section proposed the hardness increasing to ~ 55 HV from the initial value of ~ 28 HV after one cycle of repetitive tube expansion and shrinking. - Highlights: • RTES was introduced for fabricating the UFGed AA1050 tubes for the first time. • Nano-grained AA1050 tube was obtained by RTES process. • Grain size of ~ 320 nm was obtained after two half-cycles of RTES process. • Yield and ultimate strength increased by the factor of 2.17 and 1.27 respectively. • The microhardness increased to ~ 55 HV from the initial value of ~ 28 HV.

36 MATERIALS SCIENCE↗

Hydration of calcium sulfoaluminate cements - Experimental findings and thermodynamic modelling

Calcium sulfoaluminate cements (CSA) are a promising low-CO{sub 2} alternative to ordinary Portland cements and are as well of interest concerning their use as binder for waste encapsulation. In this study, the hydration of two CSA cements has been investigated experimentally and by thermodynamic modelling between 1 h and 28 days at w/c ratios of 0.72 and 0.80, respectively. The main hydration product of CSA is ettringite, which precipitates together with amorphous Al(OH){sub 3} until the calcium sulfate is consumed after around 1-2 days of hydration. Afterwards, monosulfate is formed. In the presence of belite, straetlingite occurs as an additional hydration product. The pore solution analysis reveals that straetlingite can bind a part of the potassium ions, which are released by the clinker minerals. The microstructure of both cements is quite dense even after 16 h of hydration, with not much pore space available at a sample age of 28 days. The pore solution of both cements is dominated during the first hours of hydration by potassium, sodium, calcium, aluminium and sulfate; the pH is around 10-11. When the calcium sulfate is depleted, the sulfate concentration drops by a factor of 10. This increases pH to around 12.5-12.8. Based on the experimental data, a thermodynamic hydration model for CSA cements based on cement composition, hydration kinetics of clinker phases and calculations of thermodynamic equilibria by geochemical speciation has been established. The modelled phase development with ongoing hydration agrees well with the experimental findings.

36 MATERIALS SCIENCE↗

Effect of SMAT on microstructural and mechanical properties of AA2024

In recent days surface mechanical attrition treatment (SMAT) had attracted the attention of researchers as it produces a nano-crystalline surface with improved mechanical properties. In the present study Al-4%Cu alloy used in automobile and aerospace application is subjected to surface mechanical attrition treatment using steel shots. The microstructural changes introduced on the surface of the Al alloy was investigated using Scanning Electron Microscopy (SEM). The secondary phases formed during the SMAT process is been investigated using EDX and XRD analysis. The effects of SMAT on the mechanical properties were analyzed using a tensile testing. The SMA treatment had resulted in severe plastic deformation of the surface, thereby yielded a nanocrystalline surface with a grain size of 30 to 50 nm. Further, it is also found that the SMAT produced ultra nanocrystalline particles of Cu{sub 2}Al dispersed uniformly into α-Al matrix. These microstructural changes had resulted in considerable change in the mechanical properties of these alloys. The tensile strength of these alloys had increased from ∼212 MPa to 303 MPa while the fracture toughness increased up to 28% in 10 minutes of SMAT.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Understanding of the factors slowing down metakaolin reaction in limestone calcined clay cement (LC3) at late ages

Factors which could explain the slowing down of the metakaolin reaction in LC{sup 3} blends are investigated. Portlandite availability and the presence of aluminium ions in the pore solution are shown not to be limiting factors. Hydrates can only precipitate in solution filled pores. Internal relative humidity measurements indicate that at 28 days solution is present only in pores with radii below 13 nm. An enhancement of metakaolin reaction was obtained at late ages when the larger capillaries are filled with solution. The lower limit of the water filled pores was more difficult to analyse since there is a lack of precision in determining interfacial energies of hydrates and pore solution of the system. However, this study gives an indication of order of magnitude where the growth of hydrates could be slowed down.

36 MATERIALS SCIENCE↗

Si isotope homogeneity of the solar nebula

The presence or absence of variations in the mass-independent abundances of Si isotopes in bulk meteorites provides important clues concerning the evolution of the early solar system. No Si isotopic anomalies have been found within the level of analytical precision of 15 ppm in {sup 29}Si/{sup 28}Si across a wide range of inner solar system materials, including terrestrial basalts, chondrites, and achondrites. A possible exception is the angrites, which may exhibit small excesses of {sup 29}Si. However, the general absence of anomalies suggests that primitive meteorites and differentiated planetesimals formed in a reservoir that was isotopically homogenous with respect to Si. Furthermore, the lack of resolvable anomalies in the calcium-aluminum-rich inclusion measured here suggests that any nucleosynthetic anomalies in Si isotopes were erased through mixing in the solar nebula prior to the formation of refractory solids. The homogeneity exhibited by Si isotopes may have implications for the distribution of Mg isotopes in the solar nebula. Based on supernova nucleosynthetic yield calculations, the expected magnitude of heavy-isotope overabundance is larger for Si than for Mg, suggesting that any potential Mg heterogeneity, if present, exists below the 15 ppm level.

79 ASTRONOMY AND ASTROPHYSICS↗

EXPLORING ANTICORRELATIONS AND LIGHT ELEMENT VARIATIONS IN NORTHERN GLOBULAR CLUSTERS OBSERVED BY THE APOGEE SURVEY

We investigate the light-element behavior of red giant stars in northern globular clusters (GCs) observed by the SDSS-III Apache Point Observatory Galactic Evolution Experiment. We derive abundances of 9 elements (Fe, C, N, O, Mg, Al, Si, Ca, and Ti) for 428 red giant stars in 10 GCs. The intrinsic abundance range relative to measurement errors is examined, and the well-known C–N and Mg–Al anticorrelations are explored using an extreme-deconvolution code for the first time in a consistent way. We find that Mg and Al drive the population membership in most clusters, except in M107 and M71, the two most metal-rich clusters in our study, where the grouping is most sensitive to N. We also find a diversity in the abundance distributions, with some clusters exhibiting clear abundance bimodalities (for example M3 and M53) while others show extended distributions. The spread of Al abundances increases significantly as cluster average metallicity decreases as previously found by other works, which we take as evidence that low metallicity, intermediate mass AGB polluters were more common in the more metal-poor clusters. The statistically significant correlation of [Al/Fe] with [Si/Fe] in M15 suggests that {sup 28}Si leakage has occurred in this cluster. We also present C, N, and O abundances for stars cooler than 4500 K and examine the behavior of A(C+N+O) in each cluster as a function of temperature and [Al/Fe]. The scatter of A(C+N+O) is close to its estimated uncertainty in all clusters and independent of stellar temperature. A(C+N+O) exhibits small correlations and anticorrelations with [Al/Fe] in M3 and M13, but we cannot be certain about these relations given the size of our abundance uncertainties. Star-to-star variations of α-element (Si, Ca, Ti) abundances are comparable to our estimated errors in all clusters.

79 ASTRONOMY AND ASTROPHYSICS↗

Structures of Al{sub n}, its anions and cations up to n=34: A theoretical investigation

A systematic density functional study has been performed for neutral and singly charged clusters of aluminum with up to 34 atoms. A thorough search for global minimum structures has been carried out for Al{sub n} employing genetic algorithm and basin-hopping procedures. For Al{sub n} this confirms results of previous investigations up to n=22; new global minima have been located for n=23-31, 33. Structures for singly charged cations and anions have been obtained by reoptimization of the pool of 40 low-energy structures of the neutral clusters. The global minima of charged and neutral clusters are always low-spin states with the possible exception of a triplet state of Al{sub 28}, which is isoenergetic with a singlet. The cluster structures are mostly quite irregular and do not resemble fractions of the fcc bulk phase. High symmetries are found only for the global minimum of Al{sub 23} and the triplet state of Al{sub 28}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Analysis of {sup 25}Al energy levels observed in the {sup 28}Si(p,{alpha}){sup 25}Al reaction

The level structure of {sup 25}Al has been studied at the ORNL Holifield Radioactive Ion Beam Facility by measuring the angular and energy distributions of {alpha} particles from the {sup 28}Si(p,{alpha}){sup 25}Al reaction. Proton beams ({approx}10 nA) at laboratory energies of 40 and 42 MeV were generated by the 25 MV tandem accelerator and bombarded a natural silicon target (50 {mu}g/cm{sup 2}). Seventeen levels were observed and spins for several were constrained through a distorted-wave Born approximation analysis of the angular distributions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Form factors for dark matter capture by the Sun in effective theories

In the effective theory of isoscalar and isovector dark matter-nucleon interactions mediated by a heavy spin-1 or spin-0 particle, 8 isotope-dependent nuclear response functions can be generated in the dark matter scattering by nuclei. We compute the 8 nuclear response functions for the 16 most abundant elements in the Sun, i.e. H, {sup 3}He, {sup 4}He, {sup 12}C, {sup 14}N, {sup 16}O, {sup 20}Ne, {sup 23}Na, {sup 24}Mg, {sup 27}Al, {sup 28}Si, {sup 32}S, {sup 40}Ar, {sup 40}Ca, {sup 56}Fe, and {sup 59}Ni, through numerical shell model calculations. We use our response functions to compute the rate of dark matter capture by the Sun for all isoscalar and isovector dark matter-nucleon effective interactions, including several operators previously considered for dark matter direct detection only. We study in detail the dependence of the capture rate on specific dark matter-nucleon interaction operators, and on the different elements in the Sun. We find that a so far neglected momentum dependent dark matter coupling to the nuclear vector charge gives a larger contribution to the capture rate than the constant spin-dependent interaction commonly included in dark matter searches at neutrino telescopes. Our investigation lays the foundations for model independent analyses of dark matter induced neutrino signals from the Sun. The nuclear response functions obtained in this study are listed in analytic form in an appendix, ready to be used in other projects.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

{sup 26}Al production: The Allende meteorite (Chihuahua) stellar nucleosynthesis and solar models

In 1969 a meteorite fell near the small town of Allende, state of Chihuahua in the north of Mexico. Its study yielded information that changed the current understanding of the solar model. In particular traces of {sup 26}Al were found. Abundances of that isotope had been seen in the universe and were related to regions of active heavy nucleosynthesis. Its presence on the solar system was unexpected. It is now understood that cosmic rays induce nuclear reactions on materials to produce {sup 26}Al, on Earth this is well known and it is the basis of many environmental studies, so it is not only the product of some high metalicity star collapse. Taking advantage of the recently reinforced laboratory infrastructure of the Instituto de Física, at UNAM in Mexico City, we proposed to measure the cross section for {sup 26}Al production via some of the most likely reactions, from the nuclear physics point of view (highest Q-values). In this paper the study of the {sup 28}Si(d,α){sup 26} Al nuclear reaction is shown. A target is prepared by a mixture of silicon and aluminum powders. It is irradiated with a deuteron beam (≈1 µA current) at the MV CN-Van de Graaff accelerator laboratory. The number of projectiles is deduced by Rutherford Backscattering Spectrometry (RBS). The produced {sup 26}Al nuclei are then counted at the Accelerator Mass Spectrometry Laboratory.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗