Search NASA⌕ Search

SEARCH · Search NASA

Results for “ALUMINIUM 39”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Nuclear Data Sheets for A=39☆

Experimental nuclear structure data from various reactions and decays have been evaluated for all known nuclides of mass 39 (Mg, Al, Si, P, S, Cl, Ar, K, Ca, Sc, Ti). Detailed evaluated nuclear structure information is presented for each reaction and decay and the best values combining all available data are recommended for level energies, half-lives, γ-ray energies and intensities, decay properties (energies, intensities and placement of radiations), and other spectroscopic data. The {sup 39}K, {sup 39}Ca and {sup 39}Ar are the most extensively studied nuclides; no excited states are known in {sup 39}Mg and {sup 39}Ti. This work supersedes the earlier full evaluation of A=39 by B. Singh and J. Cameron (2006Si02).

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Drift velocity of electrons in quantum wells in high electric fields

It is experimentally found that the maximum drift velocity of electrons in quantum wells of differently arranged AlGaAs/GaAs heterostructures and pseudoamorphous Al{sub 0.36}Ga{sub 0.64}As/In{sub 0.15}Ga{sub 0.85} As heterostructures is higher than the maximum drift velocity of electrons in bulk materials. It is established that no negative differential conductivity is exhibited by the field dependence of the drift velocity of two-dimensional electrons in GaAs and In{sub 0.15}Ga{sub 0.85}As. The drift velocity in the GaAs quantum well is saturated in fields several times higher than the field corresponding to the {gamma}-L intervalley transitions of electrons in bulk GaAs.

39↗

Anisotropy of the relaxation of the electron spin caused by competition of the Rashba and Dresselhaus mechanisms

Anisotropy of the relaxation of electron spin in AlGaAs quantum wells with an asymmetric profile in the growth-axis direction is studied by the technique of optical orientation. It is demonstrated that the difference between the Hanle curves for [110] and [11-bar0] orientations does originate from the spin-relaxation anisotropy rather than the electron g-factor anisotropy. Contributions to the Hanle curves both from free and localized electrons, characterized by different lifetimes, are observed.

39↗

Nonradiative recombination in GaN quantum dots formed in the AlN matrix

The mechanisms of temperature quenching of steady-state photoluminescence are studied for structures with hexagonal GaN quantum dots embedded in the AlN matrix. The structures are grown by molecular beam epitaxy. The study is conducted for structures with differently sized quantum dots, for which the peak of the photoluminescence band is in the range from 2.5 to 4.0 eV. It is found that the activation energy of thermal quenching of photoluminescence varies from 27 to 110 meV, as the quantum-dot height is decreased from 5 to 2 nm. A model is suggested to interpret the results. According to the model, the photo-luminescence signal is quenched because of the transfer of charge carriers from energy levels in the quantum dots to defect levels in the matrix.

39↗

Characterisation of magnesium potassium phosphate cements blended with fly ash and ground granulated blast furnace slag

Magnesium potassium phosphate cements (MKPCs), blended with 50 wt.% fly ash (FA) or ground granulated blast furnace slag (GBFS) to reduce heat evolution, water demand and cost, were assessed using compressive strength, X-ray diffraction (XRD), scanning electron microscopy (SEM) and nuclear magnetic resonance (NMR) spectroscopy on {sup 25}Mg, {sup 27}Al, {sup 29}Si, {sup 31}P and {sup 39}K nuclei. We present the first definitive evidence that dissolution of the glassy aluminosilicate phases of both FA and GBFS occurred under the pH conditions of MKPC. In addition to the main binder phase, struvite-K, an amorphous orthophosphate phase was detected in FA/MKPC and GBFS/MKPC systems. It was postulated that an aluminium phosphate phase was formed, however, no significant Al–O–P interactions were identified. High-field NMR analysis of the GBFS/MKPC system indicated the potential formation of a potassium-aluminosilicate phase. This study demonstrates the need for further research on these binders, as both FA and GBFS are generally regarded as inert fillers within MKPC.

36 MATERIALS SCIENCE↗

Hydrogenation of palladium rich compounds of aluminium, gallium and indium

Palladium rich intermetallic compounds of aluminium, gallium and indium have been studied before and after hydrogenation by powder X-ray diffraction and during hydrogenation by in situ thermal analysis (DSC) at hydrogen gas pressures up to 39 MPa and temperatures up to 700 K. Very weak DSC signals and small unit cell increases of below 1% for AlPd{sub 2}, AlPd{sub 3}, GaPd{sub 2}, Ga{sub 5}Pd{sub 13}, In{sub 3}Pd{sub 5}, and InPd{sub 2} suggest negligible hydrogen uptake. In contrast, for both tetragonal modifications of InPd{sub 3} (ZrAl{sub 3} and TiAl{sub 3} type), heating to 523 K at 2 MPa hydrogen pressure leads to a rearrangement of the intermetallic structure to a cubic AuCu{sub 3} type with an increase in unit cell volume per formula unit by 3.6-3.9%. Gravimetric analysis suggests a composition InPd{sub 3}H{sub a}pprox{sub 0.8} for the hydrogenation product. Very similar behaviour is found for the deuteration of InPd{sub 3}. - Graphical abstract: In situ differential scanning calorimetry of the hydrogenation of tetragonal InPd{sub 3} (ZrAl{sub 3} type) at 1.3 MPa hydrogen pressure.

36 MATERIALS SCIENCE↗

Characteristics of AlN/GaN nanowire Bragg mirror grown on (001) silicon by molecular beam epitaxy

GaN nanowires containing AlN/GaN distributed Bragg reflector (DBR) heterostructures have been grown on (001) silicon substrate by molecular beam epitaxy. A peak reflectance of 70% with normal incidence at 560 nm is derived from angle resolved reflectance measurements on the as-grown nanowire DBR array. The measured peak reflectance wavelength is significantly blue-shifted from the ideal calculated value. The discrepancy is explained by investigating the reflectance of the nanoscale DBRs with a finite difference time domain technique. Ensemble nanowire microcavities with In{sub 0.3}Ga{sub 0.7}N nanowires clad by AlN/GaN DBRs have also been characterized. Room temperature emission from the microcavity exhibits considerable linewidth narrowing compared to that measured for unclad In{sub 0.3}Ga{sub 0.7}N nanowires. The resonant emission is characterized by a peak wavelength and linewidth of 575 nm and 39 nm, respectively.

36 MATERIALS SCIENCE↗

Estimating interfacial thermal conductivity in metamaterials through heat flux mapping

The variability of the thickness as well as the thermal conductivity of interfaces in composites may significantly influence thermal transport characteristics and the notion of a metamaterial as an effective medium. The consequent modulations of the heat flux passage are analytically and experimentally examined through a non-contact methodology using radiative imaging, on a model anisotropic thermal metamaterial. It was indicated that a lower Al layer/silver interfacial epoxy ratio of ∼25 compared to that of a Al layer/alumina interfacial epoxy (of ∼39) contributes to a smaller deviation of the heat flux bending angle.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Evaluation of minority and majority spin band energies of ferromagnetic GdN thin film using optical absorption spectroscopy

Temperature dependent optical Tauc plots of AlN/GdN/AlN heterostructures have showed two optically induced transitions, and those optical transitions could be attributed to the minority and majority spin band energy. In contrast, temperature dependent magnetization measurements of GdN thin film provide direct evidence of spin ordering below 39 K, and which is also evidenced by Arrott plots.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Anomalous lattice parameter increase in alkali earth aluminium substituted tungsten defect pyrochlores

The structures of the defect pyrochlores AAl{sub 0.33}W{sub 1.67}O{sub 6} where A=K, Rb or Cs have been investigated using X-ray and neutron powder diffraction methods as well as the ab initio modelling program VASP. The three cubic pyrochlores exhibit a non-linear increase in lattice parameter with respect to ionic radius of the A cation as a consequence of displacive disorder of the A-type cations. Solid state {sup 27}Al MAS NMR studies of this pyrochlore system reveal shifts in the {delta}{approx}21-22 ppm range that are indicative of pseudo-5 coordinate Al environments and emanate from distorted Al octahedral with one abnormally long Al-O bond. Solid state {sup 39}K, {sup 85}Rb, {sup 87}Rb and {sup 133}Cs MAS and static NMR studies reflect the local cation disorder demonstrated in the structural studies. - Graphical abstract: Diagram showing general disorder of K cations in KAl{sub 0.33}W{sub 1.67}O{sub 6}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Scandium functionalized carbon aerogel: Synthesis of nanoparticles and structure of a new ScOCl and properties of NaAlH{sub 4} as a function of pore size

A new method for scandium-functionalization of carbon aerogels forming nanoparticles of a new scandiumoxochloride, ScOCl is presented. Sodium aluminiumhydride, NaAlH{sub 4}, is successfully melt infiltrated into the nano porous scaffolds with pore sizes of D{sub max}=7, 10, 13, 21, 26 and 39 nm, containing scandium based nano particles (<2.9 wt%) confirmed by elemental analysis and scanning electron microscopy. A systematic study of hydrogen storage properties of the nano composite materials is presented. An aqueous solution of ScCl{sub 3} was initially infiltrated and formed nanoconfined [Sc(OH)(H{sub 2}O){sub 5}]{sub 2}Cl{sub 4}(H{sub 2}O){sub 2}, which transforms to nanoparticles of a new scandium oxochloride, ScOCl at 192 °C and to Sc{sub 2}O{sub 3} at 420 °C. ScOCl crystallizes in an orthorhombic unit cell a=3.4409(8), b=3.9613(6) and c=8.178(2) Å, space group Pmmn, and is built from layers of [ScO{sub 4}Cl{sub 2}] octahedra forming neutral ScOCl layers. Temperature programmed desorption mass spectroscopy shows slightly improved kinetics for release of hydrogen with decreasing pore size. Continuous cycling of hydrogen release and uptake measured by the Sieverts' method reveal a larger preserved hydrogen storage capacity for scandium-functionalized aerogel with the larger pores (39 nm). - Highlights: • New synthesis approach for nanoporous Sc-functionalization carbon aerogel (Sc-CA). • The new scandium oxochloride, ScOCl, structure is obtained. • NaAlH{sub 4} nanoconfined in Sc-CA with pores ranging between 7 nm<D{sub max}<39 nm. • Improved H{sub 2} release kinetics obtained with decreasing pore size. • Nanoconfinement (D{sub max}=39 nm) retains 71% of the H{sub 2} capacity after four cycles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Influence of velocity of pressing in RCS processed AA8090 Al-Li alloy

Highlights: • For the first time the Influence of RCS on the properties of AA 8090 has been studied by processing velocity. • It is found that the properties vary according to pressing velocity and number of passes. • Reported significant property improvement achieved through the pressing velocity of 1.5mm/s. - Abstract: The effect of the velocity of pressing on grain refinement in AA8090 Al-Li alloy sheets during repetitive corrugation and straightening (RCS) at 300 °C is studied. V-groove corrugation dies and flattening dies were used at three different pressing velocities of 1.5 mm/s, 2 mm/s and 2.5 mm/s. The specimen temperature was maintained at 300 °C. Grain refinement was significantly influenced by the pressing velocity. The samples processed for 8 passes at a pressing velocity of 1.5 mm/s had an improved microhardness value of 104 HV and an increased tensile strength of 405 MPa which is respectively 39% and 113% more than the corresponding values in the parent material. TEM analysis showed that samples processed at a pressing velocity of 1.5 mm/s had in places a grain size down to 50 nm and the EBSD results revealed that the average grain size was 2 μm, with 86% of the total number of grain boundaries of the high angle type.

36 MATERIALS SCIENCE↗

Microstructure and Friction-Wear Behavior of Multi-arc Ion Plating TiAlNC Ceramic Coating on WC-6%Co Substrate

Nanocomposite coating could be used for machining tools, which can be used for cutting, drilling, milling, whetting, profiling, honing and superfinishing of various materials with high productivity. In this work, the TiAlNC ceramic coating was prepared by multi-arc ion plating method on WC-6%Co substrate. The microstructure and morphology of the coating were observed by scanning electron microscopy and transmission electron microscopy. The phase and chemical composition of the coating were determined by x-ray diffraction and x-ray energy-dispersive spectroscopy, respectively. The adhesive force of the coating was measured by a scratch tester, at the same time the friction-wear behavior of the coating was studied. The results show that there were TiN and (Ti,Al)(N,C) two phases, and there was the coexistence of amorphous and nanocrystalline in the coating. The chemical composition of the coating was composed of 20 ± 9 at.% Ti, 16 ± 5 at.% Al, 39 ± 5 at.% N and 25 ± 10 at.% C. The thickness of the coating was about 4.5 μm. The average root mean square value of the surface roughness was 225 ± 16 nm. A critical force for coating failure in scratch testing was about 25 N. The friction coefficients of the substrate and the coating were 0.55 and 0.35, respectively. The ceramic coating could improve the wear resistance of the substrate.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Preparation of the spacer for narrow electrode gap configuration in ionization-based gas sensor

Carbon nanotubes (CNTs) have started to be developed as the sensing element for ionization-based gas sensors due to the demand for improved sensitivity, selectivity, stability and other sensing properties beyond what can be offered by the conventional ones. Although these limitations have been overcome, the problems still remain with the conventional ionization-based gas sensors in that they are bulky and operating with large breakdown voltage and high temperature. Recent studies have shown that the breakdown voltage can be reduced by using nanostructured electrodes and narrow electrode gap. Nanostructured electrode in the form of aligned CNTs array with evenly distributed nanotips can enhance the linear electric field significantly. The later is attributed to the shorter conductivity path through narrow electrode gap. The paper presents the study on the design consideration in order to realize ionization based gas sensor using aligned carbon nanotubes array in an optimum sensor configuration with narrow electrode gap. Several deposition techniques were studied to deposit the spacer, the key component that can control the electrode gap. Plasma spray deposition, electron beam deposition and dry oxidation method were employed to obtain minimum film thickness around 32 {mu}m. For plasma spray method, sand blasting process is required in order to produce rough surface for strong bonding of the deposited film onto the surface. Film thickness, typically about 39 {mu}m can be obtained. For the electron beam deposition and dry oxidation, the film thickness is in the range of nanometers and thus unsuitable to produce the spacer. The deposited multilayer film consisting of copper, alumina and ferum on which CNTs array will be grown was found to be removed during the etching process. This is attributed to the high etching rate on the thin film which can be prevented by reducing the rate and having a thicker conductive copper film.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Highly efficient blue organic light emitting device using indium-free transparent anode Ga:ZnO with scalability for large area coating

The availability of economically-produced and environmentally-stable transparent conductive oxide (TCO) coatings is critical for the development of a variety of electronic devices requiring transparent electrodes. Such devices include liquid crystal display pixels and organic light emitting diodes (OLEDs),[1, 2] solar cell applications,[3, 4] and electrically heated windows.[5, 6] The materials fulfilling these requirements are usually wide band gap inorganic transparent conductive oxides (TCOs). Tin-doped indium oxide, or ITO, has traditionally been used for electronic TCO applications because of its low resistivity, high work function and transparency. Due to the increasing cost and limited supply of indium and its tendency to migrate in to the device, there has been increasing research interest to substitute ITO with an indium-free material. A number of alternative metal oxides and doped oxides have been evaluated as TCO materials with varying degrees of success.[7, 8] Among these alternatives to ITO, gallium-doped zinc oxide (GZO) [2, 9] and aluminium-doped zinc oxide (AZO) [10, 11] have drawn particular attention. These materials have been demonstrated to have resistivities and transparencies approaching those of the best ITO, low toxicity, and much lower materials cost. Although AZO is attractive as a TCO electrode material, GZO features a greater resistance to oxidation as a result of gallium’s greater electronegativity compared to Submitted to 2 aluminum.[12, 13

14 SOLAR ENERGY↗

Multiframe, Single Line-of-Sight X-Ray Imager for Burning Plasmas

The purpose of this LDRD project was to demonstrate high spatial and temporal resolution x-ray imaging using optical detectors, and in particular the VISAR and OHRV diagnostics on the OMEGA laser. The x-ray source being imaged was a backlighter capsule being imploded by 39 beams of the OMEGA laser. In particular this approach utilized a semiconductor with the side facing the backlighter capsule coated with a thin aluminum layer to allow x rays to pass through the metal layer and then get absorbed in the semiconductor. The other side of the semiconductor was AR coated to allow the VISAR or OHRV probe beam to sample the phase change of the semiconductor as the x rays were absorbed in the semiconductor. This technique is capable of acquiring sub-picosecond 2-D or 1-D x-ray images, detector spatial resolution of better than 10 um and the ability to operate in a high neutron flux environment expected on ignition shots with burning plasmas. In addition to demonstrating this technique on the OMEGA laser, several designs were made to improve the phase sensitivity, temporal resolution and number of frames over the existing diagnostics currently implemented on the OMEGA laser. These designs included both 2-d imaging diagnostics as well as improved 1-D imaging diagnostics which were streaked in time.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

SOLIDIFICATION OF THE HANFORD LAW WASTE STREAM PRODUCED AS A RESULT OF NEAR-TANK CONTINUOUS SLUDGE LEACHING AND SODIUM HYDROXIDE RECOVERY

The U.S. Department of Energy (DOE), Office of River Protection (ORP), is responsible for the remediation and stabilization of the Hanford Site tank farms, including 53 million gallons of highly radioactive mixed wasted waste contained in 177 underground tanks. The plan calls for all waste retrieved from the tanks to be transferred to the Waste Treatment Plant (WTP). The WTP will consist of three primary facilities including pretreatment facilities for Low Activity Waste (LAW) to remove aluminum, chromium and other solids and radioisotopes that are undesirable in the High Level Waste (HLW) stream. Removal of aluminum from HLW sludge can be accomplished through continuous sludge leaching of the aluminum from the HLW sludge as sodium aluminate; however, this process will introduce a significant amount of sodium hydroxide into the waste stream and consequently will increase the volume of waste to be dispositioned. A sodium recovery process is needed to remove the sodium hydroxide and recycle it back to the aluminum dissolution process. The resulting LAW waste stream has a high concentration of aluminum and sodium and will require alternative immobilization methods. Five waste forms were evaluated for immobilization of LAW at Hanford after the sodium recovery process. The waste forms considered for these two waste streams include low temperature processes (Saltstone/Cast stone and geopolymers), intermediate temperature processes (steam reforming and phosphate glasses) and high temperature processes (vitrification). These immobilization methods and the waste forms produced were evaluated for (1) compliance with the Performance Assessment (PA) requirements for disposal at the IDF, (2) waste form volume (waste loading), and (3) compatibility with the tank farms and systems. The iron phosphate glasses tested using the product consistency test had normalized release rates lower than the waste form requirements although the CCC glasses had higher release rates than the quenched glasses. However, the waste form failed to meet the vapor hydration test criteria listed in the WTP contract. In addition, the waste loading in the phosphate glasses were not as high as other candidate waste forms. Vitrification of HLW waste as borosilicate glass is a proven process; however the HLW and LAW streams at Hanford can vary significantly from waste currently being immobilized. The ccc glasses show lower release rates for B and Na than the quenched glasses and all glasses meet the acceptance criterion of < 4 g/L. Glass samples spiked with Re{sub 2}O{sub 7} also passed the PCT test. However, further vapor hydration testing must be performed since all the samples cracked and the test could not be performed. The waste loading of the iron phosphate and borosilicate glasses are approximately 20 and 25% respectively. The steam reforming process produced the predicted waste form for both the high and low aluminate waste streams. The predicted waste loadings for the monolithic samples is approximately 39%, which is higher than the glass waste forms; however, at the time of this report, no monolithic samples were made and therefore compliance with the PA cannot be determined. The waste loading in the geopolymer is approximately 40% but can vary with the sodium hydroxide content in the waste stream. Initial geopolymer mixes revealed compressive strengths that are greater than 500 psi for the low aluminate mixes and less than 500 psi for the high aluminate mixes. Further work testing needs to be performed to formulate a geopolymer waste form made using a high aluminate salt solution. A cementitious waste form has the advantage that the process is performed at ambient conditions and is a proven process currently in use for LAW disposal. The Saltstone/Cast Stone formulated using low and high aluminate salt solutions retained at least 97% of the Re that was added to the mix as a dopant. While this data is promising, additional leaching testing must be performed to show compliance with the PA. Compressive strength tests must also be performed on the Cast Stone monoliths to verify PA compliance. Based on testing performed for this report, the borosilicate glass and Cast Stone are the recommended waste forms for further testing. Both are proven technologies for radioactive waste disposal and the initial testing using simulated Hanford LAW waste shows compliance with the PA. Both are resistant to leaching and have greater than 25% waste loading.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Improving the energy response of external beam therapy (EBT) GafChromic{sup TM} dosimetry films at low energies (≤100 keV)

Purpose: Purpose of this work is to investigate the effects of varying the active layer composition of external beam therapy (EBT) GafChromic{sup TM} films on the energy dependence of the film, as well as try to develop a new prototype with more uniform energy response at low photon energies (⩽100 keV). Methods: First, the overall energy response (S{sub AD,} {sub W}(Q)) of different commercial EBT type film models that represent the three different generations produced to date, i.e., EBT, EBT2, and EBT3, was investigated. Pieces of each film model were irradiated to a fixed dose of 2 Gy to water for a wide range of beam qualities and the corresponding S{sub AD,} {sub W}(Q) was measured using a flatbed document scanner. Furthermore, the DOSRZnrc Monte Carlo code was used to determine the absorbed dose to water energy dependence of the film, f(Q). Moreover, the intrinsic energy dependence, k{sub bq}(Q), for each film model was evaluated using the corresponding S{sub AD,} {sub W}(Q) and f(Q). In the second part of this study, the authors investigated the effects of changing the chemical composition of the active layer on S{sub AD,} {sub W}(Q). Finally, based on these results, the film manufacturer fabricated several film prototypes and the authors evaluated their S{sub AD,} {sub W}(Q). Results: The commercial EBT film model shows an under response at all energies below 100 keV reaching 39% ± 4% at about 20 keV. The commercial EBT2 and EBT3 film models show an under response of about 27% ± 4% at 20 keV and an over response of about 16% ± 4% at 40 keV.S{sub AD,} {sub W}(Q) of the three commercial film models at low energies show strong correlation with the corresponding f{sup −1}(Q) curves. The commercial EBT3 model with 4% Cl in the active layer shows under response of 22% ± 4% at 20 keV and 6% ± 4% at about 40 keV. However, increasing the mass percent of chlorine makes the film more hygroscopic which may affect the stability of the film's readout. The EBT3 film prototype with 7.5% Si shows a significant improvement in the energy response at very low energies compared to the commercial EBT3 films with 4% Cl. It shows under response of 15% ± 5% at about 20 keV to 2% ± 5% at about 40 keV. However, according to the manufacturer, the addition of 7.5% Si as SiO{sub 2} adversely affected the viscosity of the active fluid and therefore affected the potential use in commercial machine coating. The latest commercial EBT3 film model with 7% Al as Al{sub 2}O{sub 3} shows an overall improvement in S{sub AD,} {sub W}(Q) compared to previous commercial EBT3 films. It shows under response at all energies <100 keV, varying from 20% ± 4% at 20 keV to 6% ± 4% at 40 keV. Conclusions: The energy response of films in the energy range <100 keV can be improved by adjusting the active layer chemical composition. Removing bromine eliminated the over response at about 40 keV. The under response at energies ≤30 keV is improved by adding 7% Al to the active layer in the latest commercial EBT3 film models.

61 RADIATION PROTECTION AND DOSIMETRY↗