Search NASA⌕ Search

SEARCH · Search NASA

Results for “ASSISTED”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2015

Effects of Laser Energy and Wavelength on the Analysis of LiFePO4 Using Laser Assisted Atom Probe Tomography

The effects of laser wavelength (355 nm and 532 nm) and laser pulse energy on the quantitative accuracy of atom probe tomography (APT) examinations of LiFePO4 (LFP) are considered. A systematic investigation of ultraviolet (UV, 355 nm) and green (532 nm) laser assisted APT of LFP has revealed distinctly different behaviors. With the use of UV laser the major issue was identified as the preferential loss of oxygen (up to 10 at. %) while other elements (Li, Fe and P) were observed to be close to nominal ratios. Lowering the laser energy per pulse to 1 pJ increased the observed oxygen concentration to near its correct stoichiometry and was well correlated with systematically higher concentrations of 16O2+ ions. This observation supports the premise that lower laser energies lead to a higher probability of oxygen molecule ionization. Conversely, at higher laser energies the resultant lower effective electric field reduces the probability of oxygen molecule ionization. Green laser assisted field evaporation led to the selective loss of Li (~50% deficiency) and correct ratios of the remaining elements, including the oxygen concentration. The loss of Li is explained by selective dc evaporation of lithium between laser pulses and relatively negligible oxygen loss as neutrals during green-laser pulsing. Lastly, plotting of multihit events on a Saxey plot for the straight-flight path data (green laser only) revealed a surprising dynamic recombination process for some molecular ions mid-flight.

Environmental Molecular Sciences Laboratory↗
DOE OSTI2024

Solar Pathways in Federal Energy Assistance Programs: Expanding the Low-Income Home Energy Assistance Program (LIHEAP) and the Weatherization Assistance Program (WAP)

The U.S. Department of Health and Human Services Low-Income Home Energy Assistance Program (LIHEAP) and U.S. Department of Energy Weatherization Assistance Program (WAP) are federal programs to help low-income households reduce their energy costs. LIHEAP provides direct assistance to help households cover energy costs and stay connected to utility services, as well as weatherization and minor energy-related repairs, and WAP provides no-cost energy efficiency measures to reduce energy use and energy bills while also improving home comfort for income-qualified households. Across the U.S., states are implementing or considering solar energy as an eligible measure for LIHEAP and/or WAP funding, but the successful implementation pathways remain largely undocumented. This report fills that gap by analyzing states' LIHEAP and WAP annual plans, surveying administrators from LIHEAP grant recipients and WAP grantees about their challenges implementing solar or barriers to doing so, and conducting interviews and workshops with program administrators.

14 SOLAR ENERGY↗
DOE OSTI2012

Observation of columnar microstructure in lattice-matched InAlN/GaN grown by plasma assisted molecular beam epitaxy

Nominally lattice matched InAlN/GaN was grown by plasma-assisted molecular beam epitaxy, and the intrinsic microstructure was investigated via x-ray diffraction, transmission electron microscopy, and atom probe tomography. The InAlN showed a cellular structure, which was comprised of ~10 nm wide Al-rich cores and ~1 nm In-rich InAlN intercellular boundaries. Despite the strong laterally non-uniform In distribution, both vertical and lateral lattices are unperturbed by the cellular structure, as evidenced by strong thickness fringes in on-axis ω-2θ high resolution x-ray diffraction scans, coherence lengths derived from on-axis (0002) and off-axis (10{anti 1}2) ω-2θ high resolution x-ray diffraction scans, and a modified Williamson-Hall analysis for on-axis reflections.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Adding to the Arsenal of Zirconium‐Based Metal–Organic Frameworks: the Topology as a Platform for Solvent‐Assisted Metal Incorporation

Gaining control over the assembly of mesoporous Zr‐based metal–organic frameworks (MOFs) with modifiable metal nodes remains a challenge. The the topology is intriguing, particularly if considering postsynthetic modification, as it presents large sodalite‐like cages surrounded by 12 interconnected 1D channels that allow for efficient diffusion of guest molecules throughout the structure. Herein, we demonstrate the first Zr MOF with the topology, NU‐1200, which was synthesized by controlling the geometry of the organic building unit. In addition, by using NU‐1200 as a platform, we perform solvent‐assisted metal incorporation to form single‐site metalated nodes, a process that is characterized by single‐crystal X‐ray diffraction.

Liu, Tian‐Fu↗
DOE OSTI2016

Laser-assisted focused He + ion beam induced etching with and without XeF 2 gas assist

Focused helium ion (He + ) milling has been demonstrated as a high-resolution nanopatterning technique; however, it can be limited by its low sputter yield as well as the introduction of undesired subsurface damage. Here, we introduce pulsed laser- and gas-assisted processes to enhance the material removal rate and patterning fidelity. A pulsed laser-assisted He+ milling process is shown to enable high-resolution milling of titanium while reducing subsurface damage in situ. Gas-assisted focused ion beam induced etching (FIBIE) of Ti is also demonstrated in which the XeF 2 precursor provides a chemical assist for enhanced material removal rate. In conclusion, a pulsed laser-assisted and gas-assisted FIBIE process is shown to increase the etch yield by ~9× relative to the pure He+ sputtering process. These He + induced nanopatterning techniques improve material removal rate, in comparison to standard He + sputtering, while simultaneously decreasing subsurface damage, thus extending the applicability of the He + probe as a nanopattering tool.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Solar Pathways in Federal Energy Assistance Programs: Expanding Low Income Home Energy Assistance Program (LIHEAP) and Weatherization Assistance Program (WAP)

How can solar best fit within your LIHEAP or WAP activities? Come join NREL and learn about the various pathways and new resources available to help implement solar in low-income programs. Panelists will share results from a multi-year research project, including survey results on LIHEAP and WAP solar adoption across the United States. This session will highlight case studies from early implementers, key lessons learned and resources developed based on stakeholder feedback for interested organizations. Attendees can expect gain a better understanding of the perceived barriers and opportunities to solar implementation, including the importance of partner coordination and complementary funding sources, and the next steps for how to get started. Additionally, attendees will hear from a local implementer of solar in WAP about their program and process.

Colorado↗
DOE OSTI2019

Distinguishing Plasma Contributions to Catalyst Performance in Plasma-Assisted Ammonia Synthesis

Plasma-assisted catalysis is the process of electrically activating gases in the plasma-phase at low temperatures and ambient pressure to drive reactions on catalyst surfaces. Plasma-assisted catalytic processes combine conventional heterogeneous surface reactions, homogeneous plasma phase reactions, and coupling between plasma-generated species and the catalyst surface. Herein, we perform kinetically controlled ammonia synthesis measurements in a dielectric barrier discharge (DBD) plasma-assisted catalytic reactor. We decouple contributions due to plasma phase reactions from the overall plasma-assisted catalytic kinetics by performing plasma-only experiments. By varying the gas composition, temperature, and discharge power, we probe how macroscopic reaction conditions affect plasma-assisted ammonia synthesis on three different γ-alumina-supported transition metal catalysts (Ru, Co, and Ni). Our experiments indicate that the overall reaction and plasma-phase reaction are first-order in both N 2 and H 2 . In contrast, the rate contributions due to plasma-catalyst interactions are first-order in N 2 but zeroth order in H 2 . Furthermore, we find that the tuning of the plasma discharge power is more effective in controlling catalytic performance than the increasing of bulk gas temperature in plasma-assisted ammonia synthesis. Lastly, we show that adding a catalyst to the DBD reaction alters the way that productivity scales with the specific energy input (SEI).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗