Search NASA⌕ Search

SEARCH · Search NASA

Results for “ASYMPTOTIC METHOD”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

A variable-order laminated plate theory based on the variational-asymptotical method

The variational-asymptotical method is a mathematical technique by which the three-dimensional analysis of laminated plate deformation can be split into a linear, one-dimensional, through-the-thickness analysis and a nonlinear, two-dimensional, plate analysis. The elastic constants used in the plate analysis are obtained from the through-the-thickness analysis, along with approximate, closed-form three-dimensional distributions of displacement, strain, and stress. In this paper, a theory based on this technique is developed which is capable of approximating three-dimensional elasticity to any accuracy desired. The asymptotical method allows for the approximation of the through-the-thickness behavior in terms of the eigenfunctions of a certain Sturm-Liouville problem associated with the thickness coordinate. These eigenfunctions contain all the necessary information about the nonhomogeneities along the thickness coordinate of the plate and thus possess the appropriate discontinuities in the derivatives of displacement. The theory is presented in this paper along with numerical results for the eigenfunctions of various laminated plates.

Lee, Bok W.↗

Explicit Integration of Extremely Stiff Reaction Networks: Asymptotic Methods

We show that, even for extremely stiff systems, explicit integration may compete in both accuracy and speed with implicit methods if algebraic methods are used to stabilize the numerical integration. The stabilizing algebra differs for systems well removed from equilibrium and those near equilibrium. This paper introduces a quantitative distinction between these two regimes and addresses the former case in depth, presenting explicit asymptotic methods appropriate when the system is extremely stiff but only weakly equilibrated. A second paper [1] examines quasi-steady-state methods as an alternative to asymptotic methods in systems well away from equilibrium and a third paper [2] extends these methods to equilibrium conditions in extremely stiff systems using partial equilibrium methods. All three papers present systematic evidence for timesteps competitive with implicit methods. Because explicit methods can execute a timestep faster than an implicit method, our results imply that algebraically stabilized explicit algorithms may offer a means to integration of larger networks than have been feasible previously in various disciplines.

Guidry, Mike W↗

Application of the variational-asymptotical method to composite plates

A method is developed for the 3D analysis of laminated plate deformation which is an extension of a variational-asymptotical method by Atilgan and Hodges (1991). Both methods are based on the treatment of plate deformation by splitting the 3D analysis into linear through-the-thickness analysis and 2D plate analysis. Whereas the first technique tackles transverse shear deformation in the second asymptotical approximation, the present method simplifies its treatment and restricts it to the first approximation. Both analytical techniques are applied to the linear cylindrical bending problem, and the strain and stress distributions are derived and compared with those of the exact solution. The present theory provides more accurate results than those of the classical laminated-plate theory for the transverse displacement of 2-, 3-, and 4-layer cross-ply laminated plates. The method can give reliable estimates of the in-plane strain and displacement distributions.

Hodges, Dewey H.↗

Analysis of transverse shear strains in pre-twisted thick beams using variational asymptotic method

The cross-sectional stiffness matrix is derived for a pre-twisted, moderately thick beam made of transversely isotropic materials and having rectangular cross sections. An asymptotically-exact methodology is used to model the anisotropic beam from 3-D elasticity, without any further assumptions. The beam is allowed to have large displacements and rotations, but small strain is assumed. The strain energy is computed making use of the beam constitutive law and kinematical relations derived with the inclusion of geometrical nonlinearities and an initial twist. The energy functional is minimized making use of the Variational Asymptotic Method (VAM), thereby reducing the cross section to a point on the beam reference line with appropriate properties, forming a 1-D constitutive law. VAM is a mathematical technique employed in the current problem to rigorously split the 3-D analysis of beams into two: a 2-D analysis over the beam cross-sectional domain, which provides a compact semi-analytical form of the properties of the cross sections, and a nonlinear 1-D analysis of the beam ref-erence curve. In this method, as applied herein, the cross-sectional analysis is performed asymptotically by taking advantage of a material small parameter and two geometric small parameters. 3-D strain components are derived using kinematics and arranged in orders of the small parameters. Closed-form expressions are derived for the 3-D non-linear warping and stress fields. Warping functions are obtained by the minimization of strain energy subject to certain set of constraints that render the 1-D strain measures well-defined. The zeroth-order 3-D warping field thus yielded is then used to integrate the 3-D strain energy density over the cross section, resulting in the 1-D strain energy density, which in turn helps identify the corresponding cross-sectional stiffness matrix. The model is capable of predicting interlaminar and transverse shear stresses accurately up to first order.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Use of asymptotic methods in vibration analysis

The derivation of dynamic differential equations, suitable for studying the vibrations of rotating, curved, slender structures was examined, and the Hamiltonian procedure was advocated for this purpose. Various reductions of the full system are displayed, which govern the vibrating troposkien when various order of magnitude restrictions are placed on important parameters. Possible advantages of the WKB asymptotic method for solving these classes of problems are discussed. A special case of this method is used illustratively to calculate eigenvalues and eigenfunctions for a flat turbine blade with small flexural stiffness.

Ashley, H.↗

Fast explicit solutions for neutrino-electron scattering: Explicit asymptotic methods

Here, we present results of explicit asymptotic approximations applied to neutrino-electron scattering in a representative model of neutrino population evolution under conditions characteristic of core-collapse supernova explosions or binary neutron star mergers. It is shown that this approach provides stable solutions of these stiff systems of equations, with accuracy and time stepping comparable to that for standard implicit treatments such as backward Euler, fixed point iteration, and Anderson-accelerated fixed point iteration. Because each time step can be computed more rapidly with the explicit asymptotic approximation than with implicit methods, this suggests that algebraically stabilized explicit integration methods could be used to compute neutrino evolution coupled to hydrodynamics more efficiently in stellar explosions and mergers than the methods currently in use.

79 ASTRONOMY AND ASTROPHYSICS↗

Asymptotic methods for internal transonic flows

For many internal transonic flows of practical interest, some of the relevant nondimensional parameters typically are small enough that a perturbation scheme can be expected to give a useful level of numerical accuracy. A variety of steady and unsteady transonic channel and cascade flows is studied with the help of systematic perturbation methods which take advantage of this fact. Asymptotic representations are constructed for small changes in channel cross-section area, small flow deflection angles, small differences between the flow velocity and the sound speed, small amplitudes of imposed oscillations, and small reduced frequencies. Inside a channel the flow is nearly one-dimensional except in thin regions immediately downstream of a shock wave, at the channel entrance and exit, and near the channel throat. A study of two-dimensional cascade flow is extended to include a description of three-dimensional compressor-rotor flow which leads to analytical results except in thin edge regions which require numerical solution. For unsteady flow the qualitative nature of the shock-wave motion in a channel depends strongly on the orders of magnitude of the frequency and amplitude of impressed wall oscillations or fluctuations in back pressure. One example of supersonic flow is considered, for a channel with length large compared to its width, including the effect of separation bubbles and the possibility of self-sustained oscillations. The effect of viscosity on a weak shock wave in a channel is discussed.

Adamson, T. C., Jr.↗

A new asymptotic method for jump phenomena

Physical phenomena involving rapid and sudden transitions, such as snap buckling of elastic shells, explosions, and earthquakes, are characterized mathematically as a small disturbance causing a large-amplitude response. Because of this, standard asymptotic and perturbation methods are ill-suited to these problems. In the present paper, a new method of analyzing jump phenomena is proposed. The principal feature of the method is the representation of the response in terms of rational functions. For illustration, the method is applied to the snap buckling of an elastic arch and to a simple combustion problem.

Reiss, E. L.↗

Asymptotic method for determining the amplitude for three-particle breakup: Neutron-deuteron scattering

The process of neutron-deuteron scattering at energies above the deuteron-breakup threshold is described within the three-body formalism of Faddeev equations. Use is made of the method of solving Faddeev equations in configuration space on the basis of expanding wave-function components in the asymptotic region in bases of eigenfunctions of specially chosen operators. Asymptotically, wave-function components are represented in the form of an expansion in an orthonormalized basis of functions depending on the hyperangle. This basis makes it possible to orthogonalize the contributions of elastic-scattering and breakup channels. The proposed method permits determining scattering and breakup parameters from the asymptotic representation of the wave function without reconstructing it over the entire configuration space. The scattering and breakup amplitudes for states of total spin S = 1/2 and 3/2 were obtained for the s-wave Faddeev equation.

74 ATOMIC AND MOLECULAR PHYSICS↗

An asymptotic method for estimating the vertical ozone distribution in the Earth's atmosphere from satellite measurements of backscattered solar UV-radiation

An asymptotic approach to solution of the inverse problems of remote sensing is presented. It consists in changing integral operators characteristic of outgoing radiation into their asymptotic analogues. Such approach does not add new principal uncertainties into the problem and significantly reduces computation time that allows to develop the real (or about) time algorithms for interpretation of satellite measurements. The asymptotic approach has been realized for estimating vertical ozone distribution from satellite measurements of backscatter solar UV radiation in the Earth's atmosphere.

Ishov, Alexander G.↗

High-frequency asymptotic methods for analyzing the EM scattering by open-ended waveguide cavities

Four high-frequency methods are described for analyzing the electromagnetic (EM) scattering by electrically large open-ended cavities. They are: (1) a hybrid combination of waveguide modal analysis and high-frequency asymptotics, (2) geometrical optics (GO) ray shooting, (3) Gaussian beam (GB) shooting, and (4) the generalized ray expansion (GRE) method. The hybrid modal method gives very accurate results but is limited to cavities which are made up of sections of uniform waveguides for which the modal fields are known. The GO ray shooting method can be applied to much more arbitrary cavity geometries and can handle absorber treated interior walls, but it generally only predicts the major trends of the RCS pattern and not the details. Also, a very large number of rays need to be tracked for each new incidence angle. Like the GO ray shooting method, the GB shooting method can handle more arbitrary cavities, but it is much more efficient and generally more accurate than the GO method because it includes the fields diffracted by the rim at the open end which enter the cavity. However, due to beam divergence effects the GB method is limited to cavities which are not very long compared to their width. The GRE method overcomes the length-to-width limitation of the GB method by replacing the GB's with GO ray tubes which are launched in the same manner as the GB's to include the interior rim diffracted field. This method gives good accuracy and is generally more efficient than the GO method, but a large number of ray tubes needs to be tracked.

Burkholder, R. J.↗

The spectral properties of distributions and asymptotic methods in perturbation theory

For differential equations of the form x'={epsilon}f(t,x;{epsilon}) in a Banach space a modification of the classical Krylov-Bogolyubov method is put forward. It allows complications in the construction of higher-order approximations which stem from the 'small denominators problem' to be avoided and many of the standard constraints on the behaviour of the function f to be eliminated. The approach suggested is based on some results on the Fourier transforms of distributions. Bibliography: 17 titles.

97 MATHEMATICS AND COMPUTING↗

Asymptotic methods for wind tunnel wall corrections at transonic speed

The effort to develop classical methods to compute wall interference at transonic speeds is outlined. The two-dimensional theory and three-dimensional development are discussed. Also, some numerical application of the two-dimensional work are indicated. The basic advantages of the asymptotic theory are noted.

Malmuth, N. D.↗

Asymptotic method for constructing a dynamic frequency response of a laser gyro

We consider an equation describing the dynamics of the phase of a beat signal at the output of a ring laser gyro in the presence of an alternating-sign frequency biasing in the form of a superposition of two meanders with different amplitudes and periods. It is assumed that the amplitude of one of the meanders is much larger than that of the other as well as than the half-widths of the static lock-in and the measured difference of eigenfrequencies of a ring resonator. A method is proposed for approximately calculating the beat frequency as a function of the measured difference between the eigenrequencies of the resonator. The result of applying this method represents analytically a recursive algorithm. Its implementation on a computer has made it possible to construct a dynamic frequency (output) response of a laser gyro with a biasing of given form. (laser applications and other topics in quantum electronics)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Perturbed Coulomb potentials in the Klein-Gordon equation via the asymptotic iteration method

The asymptotic iteration method is used to construct the exact energy eigenvalues for a Lorentz vector or a Lorentz scalar, and an equally mixed Lorentz vector and Lorentz scalar Coulombic potentials. Highly accurate and rapidly converging ground-state energies for Lorentz vector Coulomb with a Lorentz vector or a Lorentz scalar linear potential, V(r)=-{lambda}{sub 1}/r+krandV(r)=-{lambda}{sub 1}/randW(r)=kr, respectively, are obtained.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗