SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Autopilot replaces pilot during automatic maneuvers. Pilot, based on ground, flies aircraft to required altitude, then turns control over to autopilot. Increases quality of maneuvers significantly beyond that attainable through remote manual control by pilot on ground. Also increases quality of maneuvers because it performs maneuvers faster than pilot could and because it does not have to repeat poorly executed maneuvers.
The effect of restraint in pitching introduced by an automatic pilot upon the longitudinal stability of an airplane has been studied. Customary simplifying assumptions have been made in setting down the equations of motion, and the results of computations based on the simplified equations are presented to show the effect of an automatic pilot installed in an airplane of known dimensions and characteristics. The equations developed have been applied by making calculations for a Clark biplane and a Fairchild 22 monoplane.
The proportional-plus-flicker automatic pilot operates by a nonlinear principle whereby a fast-acting flicker servomotor response is combined with a low-speed proportional servomotor response for the purpose of obtaining supersonic stability and control. Essentially, the autopilot maintains a zero reference about which the output is proportional to the input. However, a flicker response overrides this proportional response at a fixed angle of gimbal displacement on either side of the zero gyroscope reference. Therefore, in contrast to other high speed control systems, the design requirements are simplified because the two components of the proportional-flicker control system are easy to build separately and they can be combined in a relatively simple manner. By application of the proportional-flicker principle, satisfactory stability can be obtained by the proper adjustment of the variable factors in the autopilot mechanism; namely, the proportional gain, the amplitude of flicker control deflection, the autopilot time-lag factor (the time-lag between flicker and proportional operation), and the point in the range that the autopilot switches from a flicker to a proportional system. There is a possibility that these factors can be adjusted so that a more rapid response time (the time to reach steady state) is obtained with the non-linear proportional-flicker autopilot than with a purely linear proportional autopilot. For the main part of this analysis, the proportional part of the system is approximated by a zero-phase-lag proportional autopilot with the assumption that the control surface moves instantaneously at the point where the system switches from flicker to proportional. Good correlation is shown between the results obtained by this method and results obtained by using a close approximation of an actual autopilot transfer function for proportional autopilot operation.
A method is suggested for predicting the stability of automatically controlled aircraft by a comparison of calculated frequency-response curves for the aircraft and experimentally determined frequency-response curves for the automatic pilot. The method is applied only to stabilization in roll. The method is expected to be useful as a means of establishing the specifications of the performance required of the automatic control device for pilotless aircraft designed as missiles.
The influence of automatic operation of the aileron and rudder controls on the lateral stability of an airplane is discussed. The control deflections are assumed to be proportional to the deviations and to the rates of deviation of the airplane from steady-flight conditions. The effects of changes in the types of deviation governing control application are considered. For one simple method of control in which the aileron deflection is proportional to the angle of bank and the rudder deflection is proportional to the angle of yaw, the effect of lag in control application is studied and regions of stability with and without lag are given. For the simple control with lag, curves are included that show the variations in the roots of the stability equation with changes in the amount of control applied. It is concluded that, although the simple control provides a satisfactory means of varying most of the lateral stability characteristics, the stability in azimuth will always be poor for such a control.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
A frequency-response method for determining the critical control-gearing and hunting oscillations of airplanes with automatic pilots is presented. The method is graphical and has several advantages over the standard numerical procedure based on Routh's discriminant. The chief advantage of the method is that direct use can be made of the measured response characteristics of the automatic pilot. This feature is especially useful in determining the existence, amplitude, and frequency of the hunting oscillations that may be present when the automatic pilot has nonlinear dynamic characteristics. Several examples are worked out to illustrate the application of the frequency-response method in determining the effect of automatic-pilot lag or lead on critical control gearing and in determining the amplitude and frequency hunting. It is shown that the method may be applied to the case of a control geared to airplane motions about two axes.
A model of the pilot as a monitor of instrument failures during automatic landing is proposed. The failure detection model consists of two stages: a linear estimator (Kalman Filter) and a decision mechanism which is based on sequential analysis. The filter equations are derived from a simplified version of the linearized dynamics of the airplane and the control loop. The perceptual observation noise is modelled to include the effects of the partition of attention among the several instruments. The final result is a simple model consisting of a high pass filter to produce the observation residuals, and a decision function which is a pure integration of the residuals minus a bias term. The dynamics of a Boeing 707 were used to simulate the fully coupled final approach in a fixed base simulator which also included failures in the airspeed, glideslope, and localizer indicators. Subjects monitored the approaches and detected the failures; their performance was compared with the predictions of the model with good agreement between the experimental data and the model.
A model is proposed to describe the pilot as a monitor of automatic landing systems. The failures treated are equivalent to the addition of a dynamic change in the mean of the observation process. The failure detection model of the pilot consists of two stages: a linear estimator (Kalman filter) and a decision mechanism based on sequential analysis. The filter equations are derived from a simplified version of the linearized dynamics of the airplane and the control loop. The perceptual observation noise is modified to include the effects of allocation of attention among the several instruments. The final result is a simple model consisting of a high-pass filter to produce the observation residuals and a decision function which is a pure integration of the residuals minus a bias term. The dynamics of a Boeing 707 were used to simulate the fully coupled final approach in a fixed-base simulator. Observers monitored the approaches and detected the failures; their performance was compared with the predictions of the model.
These citations from the international literature cover various aspects of remotely piloted vehicles. Included are articles concerning aircraft design, flight tests, aircraft control, cost effectiveness, automatic flight control, automatic pilots, and data links. Civil aviation applications are included, although military uses of remotely piloted vehicles are stressed. This updated bibliography contains 224 citations, 43 of which are new additions to the previous edition.
The author attempts to correct the misconception that piloting an airplane requires extraordinary skill and balance. He also tries to show that airplanes are extremely stable in flight. Some of the major points covered in this article include: automatic pilots, airplanes designed to be stable, and the reliance on mathematics to help in designing stable aircraft.