Search NASA⌕ Search

SEARCH · Search NASA

Results for “AUTOMATIC TRACKING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1966

Precision CW laser automatic tracking system investigated

Precision laser tracker capable of tracking a low acceleration target to an accuracy of about 20 microradians rms is being constructed and tested. This laser tracking has the advantage of discriminating against other optical sources and the capability of simultaneously measuring range.

Lang, K. T.↗
NASA NTRS1974

The accuracy of automatic tracking

It has been generally assumed that tracking accuracy changes similarly to the rate of change of the curve of the measurement conversion. The problem that internal noise increases along with the signals processed by the tracking device and that tracking accuracy thus drops were considered. The main prerequisite for solution is consideration of the dependences of the output signal of the tracking device sensor not only on the measured parameter but on the signal itself.

Kastrov, V. V.↗
NASA NTRS1989

Two novel automatic frequency tracking loops

Two automatic-frequency-control (AFC) loops are introduced and analyzed in detail. The algorithms are generalizations of the well known cross-product AFC loop with improved performance. The first estimator uses running overlapping discrete Fourier transforms to create a discriminator curve proportional to the frequency estimation error, whereas the second one preprocesses the received data and then uses an extended Kalman filter to estimate the input frequency. The algorithms are tested by computer simulations in a highly dynamic environment at low carrier/noise ratio (CNR). The algorithms are suboptimum tracking schemes with a larger frequency-error variance compared to an optimum strategy, but they offer simplicity of mechanization and a CNR with a very low operating threshold.

Aguirre, Sergio↗
NASA NTRS1980

Automatic satellite tracking system for the NASA Satellite Photometric Observatory

The development of an Automatic TV Tracking System for NASA's mobile 61 cm aperture Satellite Photometric Observatory is described. The analysis techniques used to match the FOV and resolutions to changing seeing conditions are covered in details. Theoretical reasons for such matching of general interest are discussed. It is shown that the energy density in a satellite image is 11 times greater during good seeing conditions than during typical seeing conditions. The Z7987 image tube is shown to be able to detect 16th magnitude objects under ideal seeing conditions using only 8 percent of the light collected by the main telescope. Experimental results show that the SPO equipped with a Z7987 camera can track a satellite at any orbital velocity with less than 0.14 mr accuracy using the DBA Series 606 TV Tracker. The manual system used prior to the installation of the Automatic TV Tracking System could maintain track at 1.1 mr accuracy for comparison.

Mucklow, Glenn H.↗
NASA NTRS1980

Application of an automatic cloud tracking technique to Meteosat water vapor and infrared observations

The automatic cloud tracking system was applied to METEOSAT 6.7 micrometers water vapor measurements to learn whether the system can track the motions of water vapor patterns. Data for the midlatitudes, subtropics, and tropics were selected from a sequence of METEOSAT pictures for 25 April 1978. Trackable features in the water vapor patterns were identified using a clustering technique and the features were tracked by two different methods. In flat (low contrast) water vapor fields, the automatic motion computations were not reliable, but in areas where the water vapor fields contained small scale structure (such as in the vicinity of active weather phenomena) the computations were successful. Cloud motions were computed using METEOSAT infrared observations (including tropical convective systems and midlatitude jet stream cirrus).

Endlich, R. M.↗
NASA NTRS1981

Automatic cloud tracking applied to GOES and Meteosat observations

An improved automatic processing method for the tracking of cloud motions as revealed by satellite imagery is presented and applications of the method to GOES observations of Hurricane Eloise and Meteosat water vapor and infrared data are presented. The method is shown to involve steps of picture smoothing, target selection and the calculation of cloud motion vectors by the matching of a group at a given time with its best likeness at a later time, or by a cross-correlation computation. Cloud motion computations can be made in as many as four separate layers simultaneously. For data of 4 and 8 km resolution in the eye of Hurricane Eloise, the automatic system is found to provide results comparable in accuracy and coverage to those obtained by NASA analysts using the Atmospheric and Oceanographic Information Processing System, with results obtained by the pattern recognition and cross correlation computations differing by only fractions of a pixel. For Meteosat water vapor data from the tropics and midlatitudes, the automatic motion computations are found to be reliable only in areas where the water vapor fields contained small-scale structure, although excellent results are obtained using Meteosat IR data in the same regions. The automatic method thus appears to be competitive in accuracy and coverage with motion determination by human analysts.

Endlich, R. M.↗
NASA NTRS1977

Implantable acoustic-beacon automatic fish-tracking system

A portable automatic fish tracking system was developed for monitoring the two dimensional movements of small fish within fixed areas of estuarine waters and lakes. By using the miniature pinger previously developed for this application, prototype tests of the system were conducted in the York River near the Virginia Institute of Marine Science with two underwater listening stations. Results from these tests showed that the tracking system could position the miniature pinger signals to within + or - 2.5 deg and + or - 135 m at ranges up to 2.5 km. The pingers were implanted in small fish and were successfully tracked at comparable ranges. No changes in either fish behavior or pinger performance were observed as a result of the implantation. Based on results from these prototype tests, it is concluded that the now commercially available system provides an effective approach to underwater tracking of small fish within a fixed area of interest.

Mayhue, R. J.↗
NASA NTRS1985

Automatic crack propagation tracking

A finite element based approach to fully automatic crack propagation tracking is presented. The procedure presented combines fully automatic mesh generation with linear fracture mechanics techniques in a geometrically based finite element code capable of automatically tracking cracks in two-dimensional domains. The automatic mesh generator employs the modified-quadtree technique. Crack propagation increment and direction are predicted using a modified maximum dilatational strain energy density criterion employing the numerical results obtained by meshes of quadratic displacement and singular crack tip finite elements. Example problems are included to demonstrate the procedure.

Shephard, M. S.↗
NASA NTRS1991

Weld-Bead Profilometer Rejects Optical Noise

Optoelectronic sensor measures profile of weld seam or weld bead along line perpendicular to seam. Illuminated by fan of laser light. Image of line digitized and converted to profile of height or depth versus transverse position. Intended to be part of highly automated welding system, used in automatic tracking of seam or automatic profiling of weld bead for immediate evaluation and assurance of quality during welding process. Requires little maintenance other than cleaning glass windows protecting laser and camera.

Kennedy, Larry Z.↗