Numerical analysis of finite axisymmetric deformations of incompressible elastic solids of revolution
Finite element method applicaions to finite axisymmetric deformations of incompressible elastic solids of revolution
Key, J. E.↗
SEARCH · Search NASA
Results for “AXISYMMETRIC DEFORMATION”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Innovative design of composite structures: Axisymmetric deformations of unsymmetrically laminated cylinders loaded in axial compression
The study focuses on the axisymmetric deformation response of unsymmetrically laminate cylinders loaded in axial compression by known loads. A geometrically nonlinear analysis is used. Though buckling is not studied, the deformations can be considered to be the prebuckling response. Attention is directed at three 16 layer laminates: a (90 sub 8/0 sub 8) sub T; a (0 sub 8/90 sub 8) sub T and a (0/90) sub 4s. The symmetric laminate is used as a basis for comparison, while the two unsymmetric laminates were chosen because they have equal but opposite bending-stretching effects. Particular attention is given to the influence of the thermally-induced preloading deformations that accompany the cool-down of any unsymmetric laminate from the consolidation temperature. Simple support and clamped boundary conditions are considered. It is concluded that: (1) The radial deformations of an unsymmetric laminate are significantly larger than the radial deformations of a symmetric laminate, although for both symmetric and unsymmetric laminates the large deformations are confined to a boundary layer near the ends of the cylinder; (2) For this nonlinear problem the length of the boundary layer is a function of the applied load; (3) The sign of the radial deformations near the supported end of the cylinder depends strongly on the sense (sign) of the laminate asymmetry; (4) For unsymmetric laminates, ignoring the thermally-induced preloading deformations that accompany cool-down results in load-induced deformations that are under predicted; and (5) The support conditions strongly influence the response but the influence of the sense of asymmetry and the influence of the thermally-induced preloading deformations are independent of the support conditions.
Hyer, M. W.↗
The Exact Solution for Linear Thermoelastic Axisymmetric Deformations of Generally Laminated Circular Cylindrical Shells
A detailed exact solution is presented for laminated-composite circular cylinders with general wall construction and that undergo axisymmetric deformations. The overall solution is formulated in a general, systematic way and is based on the solution of a single fourth-order, nonhomogeneous ordinary differential equation with constant coefficients in which the radial displacement is the dependent variable. Moreover, the effects of general anisotropy are included and positive-definiteness of the strain energy is used to define uniquely the form of the basis functions spanning the solution space of the ordinary differential equation. Loading conditions are considered that include axisymmetric edge loads, surface tractions, and temperature fields. Likewise, all possible axisymmetric boundary conditions are considered. Results are presented for five examples that demonstrate a wide range of behavior for specially orthotropic and fully anisotropic cylinders.
Nemeth, Michael P.↗
Axisymmetric deformations and stresses of unsymmetrically laminated composite cylinders in axial compression with thermally-induced preloading effects
This report documents an analytical study of the response of unsymmetrically laminated cylinders subjected to thermally-induced preloading effects and compressive axial load. Closed-form solutions are obtained for the displacements and intralaminar stresses and recursive relations for the interlaminar shear stress were obtained using the closed-form intralaminar stress solutions. For the cylinder geometries and stacking sequence examples analyzed, several important and as yet undocumented effects of including thermally-induced preloading in the analysis are observed. It should be noted that this work is easily extended to include uniform internal and/or external pressure loadings and the application of strain and stress failure theories.
Paraska, Peter J.↗
Buckling of imperfect cylindrical shells under axial compression and external pressure
Axisymmetric deformation effects on cylindrical shell buckling under axial compression
COMPRESSION BUCKLING↗
Finite stretching of a circular plate of neo-Hookean material.
The analytical solution presented is based on the assumption that the deformed thickness of the plate is approximately constant. The nonlinear equations governing finite axisymmetric deformations of a circular plate made of neo-Hookean material are used in the analysis. The variation of circumferential extension ratio and the variation of deformed thickness are shown in graphs.
Biricikoglu, V.↗
SOME RESULTS ON BUCKLING AND POSTBUCKLING OF CYLINDRICAL SHELLS
In this summary paper, the effects of initial deformations on the buckling and postbuckling characteristics of circular cylindrical shells under hydrostatic pressure is determined in an approximate manner. The influence of initial axisymmetric deformations is stressed. Also, the classical buckling of an axially compressed, noncircular (oval) cylindrical shell is studied. The results show that the major-minor axis ratio of the cross section has a marked effect on the critical load, and that use of the maximum radius of curvature in the formula for the classical buckling stress of a circular cylindrical shell leads to good results for moderate eccentricities.
BUCKLING↗
Thermal correction of deformations in a telescope mirror
Orbiting astronomical observatories have the potential for making observations far superior to those from earth-based mirrors. In order for this performance to be realized, the contour of the primary mirror must be very accurately controlled. A preliminary investigation of the use of thermally induced elastic strains for correcting axisymmetric deformations in space telescope mirrors has been presented. The relation between axial deformation and thermal inputs was determined by a finite difference solution of the equations for thin elastic shells. The use of this technique was demonstrated analytically on a beryllium paraboloid. This mirror had 10 equally spaced thermal inputs and results are presented which show the nature of the temperature distribution required to correct deformations due to an acceleration-type loading.
Rhodes, M. D.↗
A numerical analysis of contact and limit-point behavior in a class of problems of finite elastic deformation
Finite element methods for the analysis of bifurcations, limit-point behavior, and unilateral frictionless contact of elastic bodies undergoing finite deformation are presented. Particular attention is given to the development and application of Riks-type algorithms for the analysis of limit points and exterior penalty methods for handling the unilateral constraints. Applications focus on the problem of finite axisymmetric deformations, snap-through, and inflation of thick rubber spherical shells.
Endo, T.↗
Mixed finite element formulation for frictionless contact problems
Simple mixed finite element models and a computational procedure are presented for the solution of frictionless contact problems. The analytical formulation is based on a form of Reissner's large-rotation theory of the structure with the effect of transverse shear deformation included. The contact conditions are incorporated into the formulation by using a perturbed Lagrangian approach with the fundamental unknowns consisting of the internal forces (or stress resultants), the generalized displacements, and the Lagrange multipliers associated with the contact conditions. Numerical examples of axisymmetric deformations of a hemispherical shell and planar deformations of a circular ring are presented. Both structures are pressed against a rigid plate. Detailed information about the response of the structures is presented. The numerical studies demonstrate the high accuracy of the mixed models and the effectiveness of the computational procedure based on combining the geometrically nonlinear terms and the contact conditions in one iteration loop.
Noor, Ahmed K.↗
Anisotropic neutron star crust, solar system mountains, and gravitational waves
"Mountains" or non-axisymmetric deformations of rotating neutron stars (NS) efficiently radiate gravitational waves (GW). We consider analogies between NS mountains and surface features of solar system bodies. Both NS and moons such as Europa or Enceladus have thin crusts over deep oceans while Mercury has a thin crust over a large metallic core. Thin sheets may wrinkle in universal ways. Europa has linear features, Enceladus has "Tiger" stripes, and Mercury has lobate scarps. NS may have analogous features. The innermost inner core of the Earth is anisotropic with a shear modulus that depends on direction. If NS crust material is also anisotropic this will produce an ellipticity, when the crust is stressed, that grows with spin frequency. This yields a braking index (log derivative of spin down rate assuming only GW spin down) very different from n=5 and could explain the maximum spin observed for neutron stars and a possible minimum ellipticity of millisecond pulsars.
79 ASTRONOMY AND ASTROPHYSICS↗
Axisymmetric Snap Buckling of Conical Shells
The authors give a brief account of some of their recent analytical and numerical studies of cone buckling. limiting the discussion to axisymmetric deformations. Pertinent numerical results for the relaxation buckling of full cones subjected to uniform external pressure and Belleville springs deformed by axial edge loads are presented. In addition. bifurcation buckling problems are discussed. For a specific case. the existence of Friedrichs' intermediate buckling load, P(m). as applied to cones. is established. Upper and lower bounds for its value are given.
LOADING↗
Plastic buckling of point-loaded spherical shells
Thin spherical roller supported domes stability and axisymmetric deformation under apex point loads, investigating plastic buckling and inelastic strain effects
Roberts, S. B.↗
On the explicit finite element formulation of the dynamic contact problem of hyperelastic membranes
Contact-impact problems involving finite deformation axisymmetric membranes are solved by the finite element method with explicit time integration. The formulation of the membrane element and the contact constraint conditions are discussed. The hyperelastic, compressible Blatz and Ko material is used to model the material properties of the membrane. Two example problems are presented.
Hallquist, J. O.↗
On the role of constant-stress surfaces in the problem of minimizing elastic stress concentration
Cases involving antiplane shear deformation, axisymmetric torsion, and plane strain theory, with surfaces of constant stress magnitude optimal in terms of minimizing stress, are investigated. Results for the plane theory refer to exterior doubly connected domains. Stresses generated by torsion of an elastic solid lying within a radially convex region of revolution with plane ends, body force absent, and lateral surface traction-free, are examined. The unknown portion of the boundary of such domains may involve a hole, fillet, or notch.
Wheeler, L.↗
Finite element analysis of wrinkling membranes
The development of a nonlinear numerical algorithm for the analysis of stresses and displacements in partly wrinkled flat membranes, and its implementation on the SAP VII finite-element code are described. A comparison of numerical results with exact solutions of two benchmark problems reveals excellent agreement, with good convergence of the required iterative procedure. An exact solution of a problem involving axisymmetric deformations of a partly wrinkled shallow curved membrane is also reported.
Miller, R. K.↗
Finite element analysis of partly wrinkled membranes
The development of a nonlinear numerical algorithm for the analysis of stresses and displacements in partly wrinkled flat membranes, and its implementation on the SAP VII finite-element code are described. A comparison of numerical results with exact solutions of two benchmark problems reveals excellent agreement, with good convergence of the required iterative procedure. An exact solution of a problem involving axisymmetric deformations of a partly wrinkled shallow curved membrane is also reported.
Miller, R. K.↗
Thermal deformation of concentrators in an axisymmetric temperature field
Axisymmetric thermal deformations of paraboloid mirrors, due to heating, are examined for a mirror with a optical axis oriented toward the Sun. A governing differential equation is derived using Mushtari-Donnel-Vlasov simplifications, and a solution is presented which makes it possible to determine the principal deformation characteristics.
Bairamov, R.↗