Search NASA⌕ Search

SEARCH · Search NASA

Results for “Actinides”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

As-cast microstructures in U-Pu-Zr alloy fuel pins with 5-8 wt.% minor actinides and 0-1.5 wt% rare-earth elements

The Idaho National Laboratory (INL) is investigating U-Pu-Zr alloys with low concentrations of minor actinides (Np and Am) and rare-earth elements (La, Ce, Pr, and Nd) as possible nuclear fuels to be used to transmute minor actinides. Alloys with compositions 60U-20Pu-3Am-2Np-15Zr, 42U-30Pu-5Am-3Np-20Zr, 59U-20Pu-3Am-2Np-1RE-15Zr, 58.5U-20Pu-3Am-2Np-1.5RE-15Zr, 41U-30Pu-5Am-3Np-1RE-20Zr, and 40.5U-30Pu-5Am-3Np-1.5RE-20Zr (where numbers represent weight percents of each element and RE is a rare-earth alloy consisting of 6% La, 16% Pr, 25% Ce, and 53% Nd by weight) were arc-melted and vacuum cast as fuel pins approximately 4 mm in diameter. The as-cast pins were sectioned, polished, and examined by scanning electron microscopy. Each alloy contains high-Zr inclusions surrounded by a high-actinide matrix. Alloys with rare-earth elements also contain inclusions that are high in these elements. Within the matrix, concentrations of U and Zr vary inversely, while concentrations of Np and Pu appear approximately constant. Am occurs in the matrix and with some high-rare-earth inclusions, and occasionally as high-Am inclusions in samples without rare-earth elements. - Research Highlights: {yields}Microstructures consist of high-Zr inclusions surrounded by a high-actinide matrix. {yields}Alloys with rare-earth (RE) elements contain inclusions that are high in REs. {yields}Concentrations of U and Zr vary inversely in the matrix. {yields}Am occurs in the matrix and with high-RE inclusions.

36 MATERIALS SCIENCE↗

Electronic structure and ionicity of actinide oxides from first principles

The ground-state electronic structures of the actinide oxides AO , A 2 O 3 , and AO 2 (A=U , Np, Pu, Am, Cm, Bk, and Cf) are determined from first-principles calculations, using the self-interaction corrected local spin-density approximation. Emphasis is put on the degree of f -electron localization, which for AO 2 and A 2 O 3 is found to follow the stoichiometry, namely, corresponding to A 4+ ions in the dioxide and A 3+ ions in the sesquioxides. In contrast, the A 2+ ionic configuration is not favorable in the monoxides, which therefore become metallic. The energetics of the oxidation and reduction in the actinide dioxides is discussed, and it is found that the dioxide is the most stable oxide for the actinides from Np onward. Our study reveals a strong link between preferred oxidation number and degree of localization which is confirmed by comparing to the ground-state configurations of the corresponding lanthanide oxides. The ionic nature of the actinide oxides emerges from the fact that only those compounds will form where the calculated ground-state valency agrees with the nominal valency expected from a simple charge counting.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Phase stability of some actinides with brannerite structure at high pressures

Structure behavior of actinide brannerites ThTi{sub 2}O{sub 6}, Y{sub 0.5}U{sub 0.5}Ti{sub 1.5}Nb{sub 0.5}O{sub 6} and their analog oxide CeTi{sub 2}O{sub 6} was studied at high pressure by using in situ x-ray diffraction, Raman scattering and infra-red absorption techniques, respectively. Brannerite structure was found to be not stable and started to become amorphous at pressures above 20 GPa. Some minor crystalline phase(s) due to phase decomposition was observed in all the three samples during pressurization. In addition, the observed bulk modulus indicated that the actinide-bearing brannerites are more compressible than their analog compound CeTi{sub 2}O{sub 6}, which may be related to the asymmetric 5f electron orbits of actinide elements. - Graphical abstract: Actinide-bearing compounds with brannerite structure and their analog CeTi{sub 2}O{sub 6} are not stable at high pressure. They were amorphized after {approx}20 GPa and a minor pressure-induced phase transition or decomposition process was always observed before amorphization. Highlights: > Phase stability of three brannerites CeTi{sub 2}O{sub 6}, ThTi{sub 2}O{sub 6}, and (U,Y)(Ti,Nb){sub 2}O{sub 6} at high pressures. > Brannerite structure was not stable and became amorphous after {approx}20 GPa. > Actinide-bearing brannerites are easier compressed than their analog compound CeTi{sub 2}O{sub 6}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Comparative Study of f-Element Electronic Structure across a Series of Multimetallic Actinide, Lanthanide-Actinide and Lanthanum-Actinide Complexes Possessing Redox-Active Bridging Ligands

A comparative examination of the electronic interactions across a series of trimetallic actinide and mixed lanthanide-actinide and lanthanum-actinide complexes is presented. Using reduced, radical terpyridyl ligands as conduits in a bridging framework to promote intramolecular metal-metal communication, studies containing structural, electrochemical, and X-ray absorption spectroscopy are presented for (C{sub 5}Me{sub 5}){sub 2}An[-N=C(Bn)(tpy-M{l_brace}C{sub 5}Me4R{r_brace}{sub 2})]{sub 2} (where An = Th{sup IV}, U{sup IV}; Bn = CH{sub 2}C{sub 6}H{sub 5}; M = La{sup III}, Sm{sup III}, Yb{sup III}, U{sup III}; R = H, Me, Et) to reveal effects dependent on the identities of the metal ions and R-groups. The electrochemical results show differences in redox energetics at the peripheral 'M' site between complexes and significant wave splitting of the metal- and ligand-based processes indicating substantial electronic interactions between multiple redox sites across the actinide-containing bridge. Most striking is the appearance of strong electronic coupling for the trimetallic Yb{sup III}-U{sup IV}-Yb{sup III}, Sm{sup III}-U{sup IV}-Sm{sup III}, and La{sup III}-U{sup IV}-La{sup III} complexes, [8]{sup -}, [9b]{sup -} and [10b]{sup -}, respectively, whose calculated comproportionation constant K{sub c} is slightly larger than that reported for the benchmark Creutz-Taube ion. X-ray absorption studies for monometallic metallocene complexes of U{sup III}, U{sup IV}, and U{sup V} reveal small but detectable energy differences in the 'white-line' feature of the uranium L{sub III}-edges consistent with these variations in nominal oxidation state. The sum of this data provides evidence of 5f/6d-orbital participation in bonding and electronic delocalization in these multimetallic f-element complexes. An improved, high-yielding synthesis of 4{prime}-cyano-2,2{prime}:6{prime},2{double_prime}-terpyridine is also reported.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Recent progress in actinide borate chemistry

The use of molten boric acid as a reactive flux for synthesizing actinide borates has been developed in the past two years providing access to a remarkable array of exotic materials with both unusual structures and unprecedented properties. [ThB5O6(OH)6][BO(OH)2]·2.5H2O possesses a cationic supertetrahedral structure and displays remarkable anion exchange properties with high selectivity for TcO4-. Uranyl borates form noncentrosymmetric structures with extraordinarily rich topological relationships. Neptunium borates are often mixed-valent and yield rare examples of compounds with one metal in three different oxidation states. Plutonium borates display new coordination chemistry for trivalent actinides. Finally, americium borates show a dramatic departure from plutonium borates, and there are scant examples of families of actinides compounds that extend past plutonium to examine the bonding of later actinides. There are several grand challenges that this work addresses. The foremost of these challenges is the development of structure-property relationships in transuranium materials. A deep understanding of the materials chemistry of actinides will likely lead to the development of advanced waste forms for radionuclides present in nuclear waste that prevent their transport in the environment. This work may have also uncovered the solubility-limiting phases of actinides in some repositories, and allows for measurements on the stability of these materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dynamic recovery in silicate-apatite structures under irradiation and implications for long-term immobilization of actinides

The irradiation responses of Ca2La8(SiO4)6O2 and Sr2Nd8(SiO4)6O2 with the apatite structure are investigated to predict their long-term behaviour as host phases for immobilization of actinide elements from the nuclear fuel cycle. Different ions and energies are used to study the effects of dose, temperature, atomic displacement rate and ionization rate on irradiation-induced amorphization and recrystallization. The dose for amorphization increases with temperature in two stages, below and above 150 K. In the high temperature stage relevant to actinide immobilization, the increase of amorphization dose with temperature exhibits a strong dependence on the ratio of ionization rate to displacement rate for the different ions. Data analysis using a dynamic model for amorphization reveals that ionization-induced processes, with activation energy of 0.15 0.02 eV, dominate dynamic recovery for ions from Ne through Xe. For heavier Au ions or for alpha-recoil nuclei emitted in alpha decay of actinides, ionization becomes less dominant and dynamic recovery is controlled primarily by thermally-driven processes. In post-irradiation annealing studies of amorphous samples, epitaxial thermal recrystallization is observed at 1123 K, and irradiation-enhanced nucleation of nanocrystallites is observed under irradiation with heavier ions. The recrystallization temperature under irradiation decreases with increasing ion mass to a value of ~ 823 K, which also defines the thermally-driven critical temperature for amorphization under irradiation with heavy ions. Some partial recovery due to alpha particle irradiation at 300 K is observed that suggests a self-healing mechanism in apatite phases containing actinides. Based on the results and dynamic model, the temperature and time dependences of amorphization in silicate-apatite host phases for actinide immobilization are predicted.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Influence of a Heterocyclic Nitrogen-Donor Group on the Coordination of Trivalent Actinides and Lanthanides by Aminopolycarboxylate Complexants

Here, the novel metal chelator – N -2-pyridylmethyl-diethylenetriamine- N,N',N'',N'' -tetraacetic acid, DTTA-PyM – was designed to replace a single O-donor acetate group of the well-known aminopolycarboxylate complexant diethylenetriamine- N,N,N',N'',N'' -pentaacetic acid (DTPA) with an N-donor 2-pyridylmethyl. Potentiometric, spectroscopic, computational, and radioisotope distribution methods show distinct differences for the 4f and 5f coordination environments and enhanced actinide binding due to the nitrogen bearing heterocyclic moiety. The Am 3+ , Cm 3+ , Ln 3+ complexation studies for DTTA-PyM reveal an enhanced preference, relative to DTPA, for trivalent actinide binding. Fluorescence studies indicate no changes to the octadentate coordination of trivalent curium, while evidence of heptadentate complexation of trivalent europium is found in mixtures containing EuHL (aq) complexes at the same aqueous acidity. The denticity change observed for Eu 3+ suggests that complex protonation occurs on the pyridyl nitrogen. Formation of the CmHL(aq) complex is likely due to the protonation of an available carboxylate group since the carbonyl oxygen can maintain octadentate coordination through a rotation. The observed suppressed protonation of the pyridyl nitrogen in the Cm complexes may be attributed to stronger trivalent actinide binding by DTTA-PyM. Density functional theory calculations indicate that added stabilization of the actinide complexes with DTTA-PyM may originate from p back-bonding interactions between singly occupied 5 f orbitals of Am 3+ and the pyridyl nitrogen. The differences between the stability of trivalent actinide chelates (Am 3+ , Cm 3+ ) and trivalent lanthanide chelates (La 3+ -Lu 3+ ) are observed in liquid-liquid extraction systems, yielding unprecedented 4 f /5 f differentiation when using DTTA-PyM as an aqueous holdback reagent. In addition, the enhanced N -donor softness of the new DTTA-PyM chelator was perturbed by adding a fluorine onto the pyridine group. The comparative characterization of N -(3-fluoro-2-pyridylmethyl)-diethylenetriamine- N,N',N'',N'' -tetraacetic acid, DTTA-3-F-PyM, showed subdued 4 f /5 f differentiation due to the presence of this electron-withdrawing group.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

An Approach for Validating Actinide and Fission Product Burnup Credit Criticality Safety Analyses: Criticality (k eff ) Predictions

One of the most important remaining challenges associated with expanded implementation of burnup credit in the United States is the validation of depletion and criticality calculations used in the safety evaluation—in particular, the availability and use of applicable measured data to support validation, especially for fission products (FPs). Applicants and regulatory reviewers have been constrained by both a scarcity of data and a lack of clear technical basis or approach for use of the data. In this study, this paper describes a validation approach for commercial spent nuclear fuel (SNF) criticality safety (k eff ) evaluations based on best-available data and methods and applies the approach for representative SNF storage and transport configurations/conditions to demonstrate its usage and applicability, as well as to provide reference bias results. The criticality validation approach utilizes not only available laboratory critical experiment (LCE) data from the International Handbook of Evaluated Criticality Safety Benchmark Experiments and the French Haut Taux de Combustion program to support validation of the principal actinides but also calculated sensitivities, nuclear data uncertainties, and limited available FP LCE data to predict and verify individual biases for relevant minor actinides and FPs. The results demonstrate that (a) sufficient critical experiment data exist to adequately validate k eff calculations via conventional validation approaches for the primary actinides, (b) sensitivity-based critical experiment selection is more appropriate for generating accurate application model bias and uncertainty, and (c) calculated sensitivities and nuclear data uncertainties can be used for generating conservative estimates of bias for minor actinides and FPs. Results based on the SCALE 6.1 and the ENDF/B-VII.0 cross-section libraries indicate that a conservative estimate of the bias for the minor actinides and FPs is 1.5% of their worth within the application model. Finally, this paper provides a detailed description of the approach and its technical bases, describes the application of the approach for representative pressurized water reactor and boiling water reactor safety analysis models, and provides reference bias results based on the prerelease SCALE 6.1 code package and ENDF/B-VII nuclear cross-section data.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Covalency of Trivalent Actinide Ions with Different Donor Ligands: Do Density Functional and Multiconfigurational Wavefunction Calculations Corroborate the Observed “Breaks”?

A comprehensive ab initio study of periodic actinide–ligand bonding trends for trivalent actinides is performed. Relativistic density functional theory (DFT) and complete active-space (CAS) self-consistent field wavefunction calculations are used to dissect the chemical bonding in the [AnCl 6 ] 3– , [An(CN) 6 ] 3– , [An(NCS) 6 ] 3– , [An(S 2 PMe 2 ) 3 ], [An(DPA) 3 ] 3– , and [An(HOPO)] – series of actinide (An = U–Es) complexes. Except for some differences for the early actinide complexes with DPA, bond orders and excess 5f-shell populations from donation bonding show qualitatively similar trends in 5f n active-space CAS vs DFT calculations. The influence of spin–orbit coupling on donation bonding is small for the tested systems. Along the actinide series, chemically soft vs chemically harder ligands exhibit clear differences in bonding trends. There are pronounced changes in the 5f populations when moving from Pu to Am or Cm, which correlate with previously noted “breaks” in chemical trends. As a result, bonding involving 5f becomes very weak beyond Cm/Bk. We propose that Cm(III) is a borderline case among the trivalent actinides that can be meaningfully considered to be involved in ground-state 5f covalent bonding.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Solid-state actinide acid phosphites from phosphorous acid melts

The reaction of UO{sub 3} and H{sub 3}PO{sub 3} at 100 °C and subsequent reaction with dimethylformamide (DMF) produces crystals of the compound (NH{sub 2}(CH{sub 3}){sub 2})[UO{sub 2}(HPO{sub 2}OH)(HPO{sub 3})]. This compound crystallizes in space group P2{sub 1}/n and consists of layers of uranyl pentagonal bipyramids that share equatorial vertices with phosphite units, separated by dimethylammonium. In contrast, the reaction of phosphorous acid and actinide oxides at 210 °C produces a viscous syrup. Subsequent dilution in solvents and use of standard solution-state methods results in the crystallization of two polymorphs of the actinide acid phosphites An(HPO{sub 2}OH){sub 4} (An=U, Th) and of the mixed acid phosphite–phosphite U(HPO{sub 3})(HPO{sub 2}OH){sub 2}(H{sub 2}O)·2(H{sub 2}O). α- and β-An(HPO{sub 2}OH){sub 4} crystallize in space groups C2/c and P2{sub 1}/n, respectively, and comprise a three-dimensional network of An{sup 4+} cations in square antiprismatic coordination corner-sharing with protonated phosphite units, whereas U(HPO{sub 3})(HPO{sub 2}OH){sub 2}(H{sub 2}O){sub 2}·(H{sub 2}O) crystallizes in a layered structure in space group Pbca that is composed of An{sup 4+} cations in square antiprismatic coordination corner-sharing with protonated phosphites and water ligands. We discuss our findings in using solid inorganic reagents to produce a solution-workable precursor from which solid-state compounds can be crystallized. - Graphical abstract: Reaction of UO{sub 3} and H{sub 3}PO{sub 3} at 100 °C and subsequent reaction with DMF produces crystals of (NH{sub 2}(CH{sub 3}){sub 2})[UO{sub 2}(HPO{sub 2}OH)(HPO{sub 3})] with a layered structure. Reaction of phosphorous acid and actinide oxides at 210 °C produces a viscous syrup and further solution-state reactions result in the crystallization of the actinide acid phosphites An(HPO{sub 2}OH){sub 4} (An=U, Th), with a three-dimensional network structure, and the mixed acid phosphite–phosphite U(HPO{sub 3})(HPO{sub 2}OH){sub 2}(H{sub 2}O){sub 2}·(H{sub 2}O) with a layered structure. - Highlights: • U(VI), U(IV) and Th(IV) phosphites were synthesized by solution-state methods. • A new uranyl phosphite structure is based upon uranyl phosphite anionic sheets. • New U and Th phosphites have framework structures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Polyoxometalate-based complexes as ligands for the study of actinide chemistry

The complexation of actinide cations by polyoxometalates (POMs) has been extensively studied over the past 50 years. In this perspective article, we present the rich structural diversity of actinide-POM complexes and their contribution to the extension of our knowledges of actinide chemistry, especially regarding aspect of their redox chemistry, as well as application for the capture and separation of these cations in the context of nuclear fuel remediation. Furthermore, these heterometallic assemblies have also proven highly valuable as model for heterogeneous systems based on actinides supported by metal oxide surfaces. In particular, activation of the An–O bond of actinyl fragments upon complexation with lacunary POMs has been reported, creating opportunities for future developments regarding the reactivity of these heterometallic assemblies.

Auvray, Thomas↗

Actinide-rich and Actinide-poor r -process-enhanced Metal-poor Stars Do Not Require Separate r -process Progenitors

The astrophysical production site of the heaviest elements in the universe remains a mystery. Incorporating heavy-element signatures of metal-poor, $r$-process-enhanced stars into theoretical studies of $r$-process production can offer crucial constraints on the origin of heavy elements. In this study, we introduce and apply the "actinide-dilution with matching" model to a variety of stellar groups, ranging from actinide-deficient to actinide-enhanced, to empirically characterize r-process ejecta mass as a function of electron fraction. We find that actinide-boost stars do not indicate the need for a unique and separate $r$-process progenitor. Rather, small variations of neutron richness within the same type of $r$-process event can account for all observed levels of actinide enhancements. The very low-$Y_e$ , fission-cycling ejecta of an $r$-process event need only constitute 10%–30% of the total ejecta mass to accommodate most actinide abundances of metal-poor stars. We find that our empirical $Y_e$ distributions of ejecta are similar to those inferred from studies of GW170817 mass ejecta ratios, which is consistent with neutron-star mergers being a source of the heavy elements in metal-poor, $r$-process-enhanced stars.

79 ASTRONOMY AND ASTROPHYSICS↗

Leveraging Actinide Hydrolysis Chemistry for Targeted Th and U Separations using Amidoxime-Functionalized Poly(HIPE)s

Polymerized high internal phase emulsions (poly(HIPE)s) are porous polymer monoliths whose synthesis can easily be tailored to allow incorporation of functional units. In this work, nitrile containing poly(HIPE)s have been prepared with either acrylonitrile (AN) or 4-cyanostyrene (4CS) comonomers. Post-synthetic modification of these nitrile-containing poly(HIPE)s yields their corresponding amidoximated analogues, which were studied for actinide uptake. These amidoxime-functionalized, porous polymers were shown to adsorb 95 % Th4+ species from aqueous solution within 30 minutes. In contrast to other amidoxime containing polymers the uptake of UO22+ in these poly(HIPE)s is lower under similar conditions. A critical analysis of actinide separations and high-energy X-ray scattering data provides insight into the polymers’ selectivity, enabled by the uptake of multinuclear Th clusters.

actinides↗

Comparative studies of actinide and sub-actinide fission cross section calculation from MCNP6 and TALYS

Comparative studies of actinide and sub-actinide fission cross section calculation from MCNP6 and TALYS have been conducted. In this work, fission cross section resulted from MCNP6 prediction will be compared with result from TALYS calculation. MCNP6 with its event generator CEM03.03 and LAQGSM03.03 have been validated and verified for several intermediate and heavy nuclides fission reaction data and also has a good agreement with experimental data for fission reaction that induced by photons, pions, and nucleons at energy from several ten of MeV to about 1 TeV. The calculation that induced within TALYS will be focused mainly to several hundred MeV for actinide and sub-actinide nuclides and will be compared with MCNP6 code and several experimental data from other evaluator.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Characterization of actinide abundances and isotopic compositions by HR-ICP-MS. Part 2: Results from actinide doping studies

Previously, we presented actinide isotopic and elemental data from fallout melt glass that was measured using high-resolution inductively coupled plasma mass spectrometry (HR-ICP-MS). Direct comparison between these measurements and ‘gold standard’ data obtained by multi-collector ICP-MS showed broad overlap, indicating that HR-ICP-MS is a potentially valuable technique for producing actinide elemental and isotopic data on a relatively rapid timescale. To test the usefulness of this technique further, we doped varying amounts of uranium certified reference materials (CRMs) into a rhyolitic rock standard to establish the effects of uranium concentration and isotopic composition on the accuracy of uranium isotopic analyses by HR-ICP-MS. This also enabled us to quantify peak tailing effects from 238 U on the measurement of 239 Pu and 237 Np, which in turn allows us to constrain correction factors based on measured 237 Np/ 238 U and 239 Pu/ 238 U ratios. A second doping study involved the addition of a mixed actinide standard into three samples with different matrix compositions (termed soil, city, and seawater) to assess whether sample chemistry affects the accuracy and precision of these analyses. Results suggest that this is not the case. Systematic offsets were not observed in elemental or isotopic data derived from the three matrix samples. Results indicate that useful actinide isotopic data can be obtained from whole rock solutions by HR-ICP-MS. Our findings also have implications for solid sampling techniques such as laser ablation ICP-MS, which do not require sample dissolution.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗