Search NASA⌕ Search

SEARCH · Search NASA

Results for “Aero”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2012

Aero-Assisted Pre-Stage for Ballistic and Aero-Assisted Launch Vehicles

A concept of an aero-assisted pre-stage is proposed, which enables launch of both ballistic and aero-assisted launch vehicles from conventional runways. The pre-stage can be implemented as a delta-wing with a suitable undercarriage, which is mated with the launch vehicle, so that their flight directions are coaligned. The ample wing area of the pre-stage combined with the thrust of the launch vehicle ensure prompt roll-out and take-off of the stack at airspeeds typical for a conventional jet airliner. The launch vehicle is separated from the pre-stage as soon as safe altitude is achieved, and the desired ascent trajectory is reached. Nominally, the pre-stage is non-powered. As an option, to save the propellant of the launch vehicle, the pre-stage may have its own short-burn propulsion system, whereas the propulsion system of the launch vehicle is activated at the separation point. A general non-dimensional analysis of performance of the pre-stage from roll-out to separation is carried out and applications to existing ballistic launch vehicle and hypothetical aero-assisted vehicles (spaceplanes) are considered.

access to space↗
NASA NTRS1977

Intercomparison of neutral composition measurements from the satellite Esro 4, Aeros A, Aeros B, and Atmosphere Explorer C

Number-density data obtained at orbital 'crossover' points with the neutral-gas mass spectrometers aboard the Esro 4, Aeros A, AE-C, and Aeros B satellites are intercompared. All the mass spectrometers were designed to measure the ambient number densities of atomic oxygen, molecular nitrogen, helium, and argon. It is found that the agreement for N2 and O is satisfactory within the experimental errors and that the He measurements exhibit unexpectedly large discrepancies far outside the error range. Calibration and instrument sources of error are considered.

Trinks, H.↗
DOE OSTI2022

Aero-Optics of Hypersonic Turbulent Boundary Layers

Aero-optics refers to optical distortions due to index-of-refraction gradients that are induced by aerodynamic density gradients. At hypersonic flow conditions, the bulk velocity is many times the speed of sound and density gradients may originate from shock waves, compressible turbulent structures, acoustic waves, thermal variations, etc. Due to the combination of these factors, aero-optic distortions are expected to differ from those common to sub-sonic and lower super-sonic speeds. This report summarizes the results from a 2019-2022 Laboratory Directed Research and Development (LDRD) project led by Sandia National Laboratories in collaboration with the University of Notre Dame, New Mexico State University, and the Georgia Institute of Technology. Efforts extended experimental and simulation methodologies for the study of turbulent hypersonic boundary layers. Notable experimental advancements include development of spectral de-aliasing techniques for highspeed wavefront measurements, a Spatially Selective Wavefront Sensor (SSWFS) technique, new experimental data at Mach 8 and 14, a Quadrature Fringe Imaging Interferometer (QFII) technique for time-resolved index-of-refraction measures, and application of QFII to shock-heated air. At the same time, model advancements include aero-optic analysis of several Direct Numerical Simulation (DNS) datasets from Mach 0.5 to 14 and development of wall-modeled Large Eddy Simulation (LES) techniques for aero-optic predictions. At Mach 8 measured and predicted root mean square Optical Path Differences agree within confidence bounds but are higher than semi-empirical trends extrapolated from lower Mach conditions. Overall, results show that aero-optic effects in the hypersonic flow regime are not simple extensions from prior knowledge at lower speeds and instead reflect the added complexity of compressible hypersonic flow physics.

36 MATERIALS SCIENCE↗
NASA NTRS2012

Aero-Thermal Calibration of the NASA Glenn Icing Research Tunnel (2012 Test)

A major modification of the refrigeration plant and heat exchanger at the NASA Glenn Icing Research Tunnel (IRT) occurred in autumn of 2011. It is standard practice at NASA Glenn to perform a full aero-thermal calibration of the test section of a wind tunnel facility upon completion of major modifications. This paper will discuss the tools and techniques used to complete an aero-thermal calibration of the IRT and the results that were acquired. The goal of this test entry was to complete a flow quality survey and aero-thermal calibration measurements in the test section of the IRT. Test hardware that was used includes the 2D Resistive Temperature Detector (RTD) array, 9-ft pressure survey rake, hot wire survey rake, and the quick check survey rake. This test hardware provides a map of the velocity, Mach number, total and static pressure, total temperature, flow angle and turbulence intensity. The data acquired were then reduced to examine pressure, temperature, velocity, flow angle, and turbulence intensity. Reduced data has been evaluated to assess how the facility meets flow quality goals. No icing conditions were tested as part of the aero-thermal calibration. However, the effects of the spray bar air injections on the flow quality and aero-thermal calibration measurements were examined as part of this calibration.

Pastor-Barsi, Christine↗
NASA NTRS2012

Aero-Thermal Calibration of the NASA Glenn Icing Research Tunnel (2012 Test)

A major modification of the refrigeration plant and heat exchanger at the NASA Glenn Icing Research Tunnel (IRT) occurred in autumn of 2011. It is standard practice at NASA Glenn to perform a full aero-thermal calibration of the test section of a wind tunnel facility upon completion of major modifications. This paper will discuss the tools and techniques used to complete an aero-thermal calibration of the IRT and the results that were acquired. The goal of this test entry was to complete a flow quality survey and aero-thermal calibration measurements in the test section of the IRT. Test hardware that was used includes the 2D Resistive Temperature Detector (RTD) array, 9-ft pressure survey rake, hot wire survey rake, and the quick check survey rake. This test hardware provides a map of the velocity, Mach number, total and static pressure, total temperature, flow angle and turbulence intensity. The data acquired were then reduced to examine pressure, temperature, velocity, flow angle, and turbulence intensity. Reduced data has been evaluated to assess how the facility meets flow quality goals. No icing conditions were tested as part of the aero-thermal calibration. However, the effects of the spray bar air injections on the flow quality and aero-thermal calibration measurements were examined as part of this calibration.

Pastor-Barsi, Christine M.↗
DOE OSTI2022

Towards optimal gas cooling with minimal aero-optical distortion for a laser amplifier head

Next-generation lasers combining high-peak-power, ultrashort pulses with high repetition rates have the potential to efficiently deliver the high-average-power outputs required by many emerging technologies and areas of research. This work introduces a three-stage workflow consisting of low- and high-fidelity fluid simulations, in addition to aero-optical analyses. The final goal is to optimize gas cooling within a laser amplifier head while maintaining minimal aero-optical distortions. Low-fidelity RANS simulations are used to obtain mean flow solutions and transition locations. High-fidelity LES simulations, informed by their RANS counterparts, provide solutions containing density fluctuations, which are then passed on to the aero-optical analysis. The aero-optical analysis provides insight into the optical quality of the laser beam passing through the flow found in the LES results.

42 ENGINEERING↗
NASA NTRS1990

Propulsion technology for National Aero-Space Plane

America's entrée in the world of hypersonics is spearheaded by the National Aero-Space Plane program. Although the concept of hypersonic flight at speeds above Mach 6 has been investigated before in many countries, the efforts begun in the 1960's in the United States did not result in a major new capability. Many valid principles were examined, a good data base was developed, but a demonstration was not pursued with the priorities assigned to the space program at that time. During the 1970's, our hypersonic effort dwindled to a few dedicated research efforts which refined propulsion, aerodynamics, and computational fluid dynamics principles. To make real progress in the 1980's, and beyond, a focus and a rekindled effort was needed. The National Aero-Space Plane program provides that focus of activities. Through the demonstration of single-stage-to-orbit (SSTO) capabilities in a manned vehicle capable of normal aircraft-like operations, the United States seeks to revitalize our advanced hypersonics research, spearhead the rapid development of technology, and conclusively demonstrate through flight testing that the age of hypersonics has arrived. This paper briefly describes the growth of the National Aero-Space Plane program, its objectives, its National team organization, and the schedule now envisioned for the remainder of the program. The primary emphasis of the paper is National Aero-Space Plane propulsion technology. Key technical challenges are noted and a discussion of progress relative to those challenges associated with propulsion is presented.

Computational fluid dynamics↗
NASA NTRSDate not supplied

Statistical Wind-Tunnel Experimentation Advancements for eVTOL Aircraft Aero-Propulsive Model Development

Compared to many conventional aircraft, electric vertical takeoff and landing (eVTOL) vehicle designs present greater aero-propulsive complexity and many interacting factors requiring development of novel testing and model development strategies. This paper describes several advances in statistically-rigorous experiment design methods for wind-tunnel testing of eVTOL aircraft enabling accurate aero-propulsive model development. The techniques are applied to a subscale tilt-rotor eVTOL aircraft configuration built at NASA Langley Research Center that has 24 independent control effectors. The general testing approach, leveraging design of experiments and response surface methodology, is outlined and followed by a detailed description of the experiment design and modeling approach employed for different phases of the wind-tunnel testing. A new approach for gravitational tare modeling is developed and validated, which reduces the required wind-tunnel test time by nearly 50%. A mostly automated trim envelope determination approach is formulated to rapidly determine the aircraft flight envelope to inform transition testing for aero-propulsive model development. Efficient powered-airframe characterization tests are conducted using a nested I-optimal design approach formulated in previous simulation-based testing. The collective wind-tunnel testing approach facilitates rapid characterization of eVTOL aircraft configurations and produces accurate aero-propulsive models that can be used in flight dynamics simulations.

design of experiments↗
DOE OSTI2021

Aero-structural design and optimization of 50 MW wind turbine with over 250-m blades

The quest for reduced levelized cost of energy has driven significant growth in wind turbine size; however, larger rotors face significant technical and logistical challenges. The largest published rotor design is 25 MW, and here we consider an even larger 50 MW design with blade length over 250 m. This paper shows that a 50 MW design is indeed possible from a detailed engineering perspective and presents a series of aero-structural blade designs, and critical assessment of technology pathways and challenges for extreme-scale rotors. The 50 MW rotor design begins with Monte Carlo simulations focused on optimizing carbon spar cap and root design. A baseline design resulted in a 250-m blade with mass of 502 tonnes. Subsequently, an aero-structural design and optimization were performed to reduce the blade mass/cost with more than 25% mass reduction and 30% cost reduction by determining optimal blade chord and airfoil thickness for best aero-structural performance.

Yao, Shulong↗
DOE OSTI2023

Optimal gas cooling with minimal aero-opticaldistortion for next generation high-average-power lasers (Progress report, Year 2)

Next-generation lasers that combine high-peak-power ultrashort pulses with high repetition rates have the potential to efficiently deliver the high-average-power outputs required for inertial fusion energy generation, laser-based particle acceleration, and to generate compact secondary x- and 𝛾-ray radiation sources, among others. The combination of long gain length with high surface-to-volume ratio to remove residual heat makes gas-cooled multi-slab amplifier heads an inherently aperture- and average power scalable technology that enables this new class of solid-state lasers, and their thermal management becomes the most pressing technical challenge. As the index-of refraction depends on the gas density, heat removal from the slab surfaces unavoidably entails scattering of propagated light from regions of high temperature fluctuations. The requirement to maximize convective heat extraction from the gain medium under the constraint of minimum optical aberration of the beam renders amplifier slab cooling a technological challenge at the intersection of aero-optics, fluid-mechanics and heat transfer. The goal of this research is to leverage computational fluid dynamics and aero optics simulations of different levels of fidelity to devise a numerical modeling and optimization framework for gas-cooled multi-slab amplifiers. The project will be conducted in close collaboration with the Advanced Photon Technologies Group at Lawrence Livermore National Laboratory, where a gas-cooled test stand for laser materials and thermal management structures will be developed and installed. The final goal of the collaborative effort is to manufacture and benchmark a physical prototype of an numerically optimized amplifier head design. Measurement data on solid-state and thermo-optical distortions will be used for the validation of the numerical models. The key technical challenge in this multi-objective design problem is that of balancing optimal heat removal with minimal optical distortion. To facilitate computationally efficient design optimization and, at the same time, deepen our basic understanding of the interaction of light with turbulence, a complementary study that combines high and low-fidelity flow simulations and aero-optical models is proposed. Along the lines of these two objectives and solution strategies, the project is organized into two thrusts.

42 ENGINEERING↗
NASA NTRS1975

A proposed university/industry/government cooperative aero educational program

A program is proposed to provide mutual aid between the beleaguered Aero Engineering degree-granting departments in the United States and United States industry/government. It is proposed that any accrued cost differentials be supported by the latter groups, although all programs proposed will provide true mutual assistance. The program suggested is designed to provide assured industrial experience for Aero faculty members, combat engineering obsolescence for industry engineers, provide assured summer work for Aero undergraduates, encourage industry/government input in curriculum and course planning, and funnel significant laboratory devices into the university system.

Brodsky, R. F.↗
NASA NTRS1989

The spectral analysis of an aero-engine assembly incorporating a squeeze-film damper

Aero-engine structures have very low inherent damping and so artificial damping is often introduced by pumping oil into annular gaps between the casings and the outer races of some or all of the rolling-element bearings supporting the rotors. The thin oil films so formed are called squeeze film dampers and they can be beneficial in reducing rotor vibration due to unbalance and keeping to reasonable limits the forces transmitted to the engine casing. However, squeeze-film dampers are notoriously non-linear and as a result can introduce into the assembly such phenomena as subharmonic oscillations, jumps and combination frequencies. The purpose of the research is to investigate such phenomena both theoretically and experimentally on a test facility reproducing the essential features of a medium-size aero engine. The forerunner of this work was published. It was concerned with the examination of a squeeze-film damper in series with housing flexibility when supporting a rotor. The structure represented to a limited extent the essentials of the projected Rolls Royce RB401 engine. That research demonstrated the ability to calculate the oil-film forces arising from the squeeze film from known motions of the bearing components and showed that the dynamics of a shaft fitted with a squeeze film bearing can be predicted reasonably accurately. An aero-engine will normally have at least two shafts and so in addition to the excitation forces which are synchronous with the rotation of one shaft, there will also be forces at other frequencies from other shafts operating on the squeeze-film damper. Theoretical and experimental work to consider severe loading of squeeze-film dampers and to include these additional effects are examined.

Holmes, R.↗
NASA NTRS1994

Proceedings of the Non-Linear Aero Prediction Requirements Workshop

The purpose of the Non-Linear Aero Prediction Requirements Workshop, held at NASA Langley Research Center on 8-9 Dec. 1993, was to identify and articulate requirements for non-linear aero prediction capabilities during conceptual/preliminary design. The attendees included engineers from industry, government, and academia in a variety of aerospace disciplines, such as advanced design, aerodynamic performance analysis, aero methods development, flight controls, and experimental and theoretical aerodynamics. Presentations by industry and government organizations were followed by panel discussions. This report contains copies of the presentations and the results of the panel discussions.

Logan, Michael J.↗
NASA NTRS1999

Aero-Structural Interaction, Analysis, and Shape Sensitivity

A multidisciplinary sensitivity analysis technique that has been shown to be independent of step-size selection is examined further. The accuracy of this step-size independent technique, which uses complex variables for determining sensitivity derivatives, has been previously established. The primary focus of this work is to validate the aero-structural analysis procedure currently being used. This validation consists of comparing computed and experimental data obtained for an Aeroelastic Research Wing (ARW-2). Since the aero-structural analysis procedure has the complex variable modifications already included into the software, sensitivity derivatives can automatically be computed. Other than for design purposes, sensitivity derivatives can be used for predicting the solution at nearby conditions. The use of sensitivity derivatives for predicting the aero-structural characteristics of this configuration is demonstrated.

Newman, James C., III↗
NASA NTRS2010

Turbofan Volume Dynamics Model for Investigations of Aero-Propulso-Servo-Elastic Effects in a Supersonic Commercial Transport

A turbofan simulation has been developed for use in aero-propulso-servo-elastic coupling studies, on supersonic vehicles. A one-dimensional lumped volume approach is used whereby each component (fan, high-pressure compressor, combustor, etc.) is represented as a single volume using characteristic performance maps and conservation equations for continuity, momentum and energy. The simulation is developed in the MATLAB/SIMULINK (The MathWorks, Inc.) environment in order to facilitate controls development, and ease of integration with a future aero-servo-elastic vehicle model being developed at NASA Langley. The complete simulation demonstrated steady state results that closely match a proposed engine suitable for a supersonic business jet at the cruise condition. Preliminary investigation of the transient simulation revealed expected trends for fuel flow disturbances as well as upstream pressure disturbances. A framework for system identification enables development of linear models for controller design. Utilizing this framework, a transfer function modeling an upstream pressure disturbance s impacts on the engine speed is developed as an illustrative case of the system identification. This work will eventually enable an overall vehicle aero-propulso-servo-elastic model

Connolly, Joseph W.↗