DOE OSTI2018
Radiation resistance of austenitic alloy 709 (named as A709) and ferritic-martensitic steel Grade 92 (G92) were investigated in this project using 316H and Grade 91 (G91) as references, respectively. In the meantime, a model 709 (M709) alloy (Fe-20Cr-24Ni) was prepared to study the matrix response to irradiation. Samples machined from the tab section of three creep-ruptured A709 samples, i.e., 17,106 h at 600 °C, 12,014 h at 650 °C, and 16,448 h at 700 °C, were included in this work to evaluate radiation effect on the long-term “thermally aged” samples. Primarily Fe 2+ ion irradiation was conducted at 350, 600 and 670 °C for up to 75 displacements per atom (dpa), together with a few proton irradiation experiments at 380–670 °C for up to 1.5 dpa. Additionally, four neutron-irradiated NF709 samples (3.22–8 dpa at ~430–469 °C) were examined. The samples were examined by transmission electron microscopy (TEM), scanning electron microscopy (SEM) and energy dispersive x-ray spectroscopy (EDS) for microstructures and nanoindentation for radiation-hardening. Unlike the negligible hardening after irradiation at 670 °C, irradiation to nominal 2.5–50 dpa at 350 °C resulted in radiation-hardening of 13.5±5.4 % for A709, which was comparable to that of 13.4±6.2 % for M709 and moderately lower than that of 20.1±5.6 % for 316H. The radiation-hardening induced by the same irradiation condition to the “thermally aged” samples was comparable to A709, which were hardened by 15.0±8.2 %, 13.5±6.0 %, and 10.1±6.1 % for the 600, 650, and 700 °C aged samples, respectively. The radiation-hardening of A709 is significantly lower than that (~94±9 %) of neutron-irradiated NF709 to 8 dpa at ~430 °C.